Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sheaths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Electromagnetic scattering and absorption by thin walled dielectric cylinders with application to ice crystals

Important in the atmospheric heat balance are the reflection, transmission, and absorption of visible and infrared radiation by clouds and polluted atmospheres. Integral equations are derived to evaluate the scattering and absorption of electromagnetic radiation from thin cylindrical dielectric shells of arbitrary cross section when irradiated by a plane wave of any polarization incident in a plane perpendicular to the generators. Application of the method to infinitely long hexagonal cylinders has yielded numerical scattering and absorption data which simulate columnar sheath ice crystals. It is found that the numerical procedures are economical for cylinders having perimeters less than approximately fifteen free-space wavelengths.

Senior, T. B. A.↗
NASA NTRS1977

A Weibull characterization for tensile fracture of multicomponent brittle fibers

Necessary to the development and understanding of brittle fiber reinforced composites is a means to statistically describe fiber strength and strain-to-failure behavior. A statistical characterization for multicomponent brittle fibers is presented. The method, which is an extension of usual Weibull distribution procedures, statistically considers the components making up a fiber (e.g., substrate, sheath, and surface) as separate entities and taken together as in a fiber. Tensile data for silicon carbide fiber and for an experimental carbon-boron alloy fiber are evaluated in terms of the proposed multicomponent Weibull characterization.

Barrows, R. G.↗
NASA NTRS1978

Anode power in quasisteady magnetoplasmadynamic accelerators

Anode heat flux in a quasi-steady MPD accelerator has been measured directly and locally by thermocouples attached to the inside surface of a shell anode. These measurements show that over a range of arc current from 5.5 to 44 kA, and argon mass flow from 1 to 48 g/s, the fraction of the total arc power deposited in the anode decreases from 50% at 200 kW to 10% at 20 MW. A theoretical model of the anode heat transfer asserts that energy exchange between electrons and heavy particles in the plasma near the anode occurs over distances greater than the anode sheath thickness, and hence the usual anode fall voltage, electron temperature, and work function contributions to the anode heat flux are supplemented by a contribution from the interelectrode potential. Calculations of anode heat flux using the measured current density, plasma potential, and electron temperature in the plasma adjacent to the anode agree with the direct measurements and indicate that the decrease in anode power fraction at higher arc powers can be attributed to the smaller mean free paths in the interelectrode plasma.

Saber, A. J.↗
NASA NTRS1978

Heating of coronal plasma by anomalous current dissipation

It is shown that there exist heating mechanisms which connect the observed radiative properties of the inner corona in a simple way to the underlying solar magnetic field. The mechanisms considered involve the generation and consequent dissipation of coronal currents. It is argued that the spatially and temporally inhomogeneous nature of the erupting solar magnetic field is an essential element of coronal heating. Unlike heating theories conceived in the context of the 'homogeneous' corona, this class of current heating models incorporates the observed stochastic coronal structuring at the onset, and does not view it as a complication of an otherwise straightforward model. Attention is given to the generation of coronal currents, the flux-tube emergence, the gradual growth and decay of active regions, the energetics of current dissipation, current sheath geometry and heat transport, and anomalous current dissipation.

Rosner, R.↗
NASA NTRS1978

Mariner 10 magnetic field observations of the Venus wake

The paper reports on an analysis of magnetic field observations by the Mariner 10 spacecraft during approximately a one-day period ending a few hours beyond Venus encounter on February 5, 1974. The magnetic field measurements are used to study the downstream region of the solar wind-Venus interaction over a distance of about 100 Venus radii. The study characterizes the various magnetic field regions encountered behind and near the planet; presents an argument that the magnetic field signatures observed are consistent with observation of either a steady or a transient wake, or at least the boundary region of such a wake, interior to a common sheath-like region; examines in detail the fluctuation and discontinuity features of these regions and compares them with those of the interplanetary medium; and summarizes how these new features contribute to the understanding of the solar wind-Venus interaction.

Lepping, R. P.↗
NASA NTRS1978

Mercury ion thruster research, 1978

The effects of 8 cm thruster main and neutralizer cathode operating conditions on cathode orifice plate temperatures were studied. The effects of cathode operating conditions on insert temperature profiles and keeper voltages are presented for three different types of inserts. The bulk of the emission current is generally observed to come from the downstream end of the insert rather than from the cathode orifice plate. Results of a test in which the screen grid plasma sheath of a thruster was probed as the beam current was varied are shown. Grid performance obtained with a grid machined from glass ceramic is discussed. The effects of copper and nitrogen impurities on the sputtering rates of thruster materials are measured experimentally and a model describing the rate of nitrogen chemisorption on materials in either the beam or the discharge chamber is presented. The results of optimization of a radial field thruster design are presented. Performance of this device is shown to be comparable to that of a divergent field thruster and efficient operation with the screen grid biased to floating potential, where its susceptibility to sputter erosion damage is reduced, is demonstrated.

Wilbur, P. J.↗
NASA NTRS1979

Mechanisms of boron fiber strengthening by thermal treatment

The fracture strain for boron on tungsten fibers was studied for improvement by heat treatment under vacuum or argon environments. The mechanical basis for this improvement is thermally-induced axial contraction of the entire fiber, whereby strength-controlling core flaws are compressed and fiber fracture strain increased by the value of the contraction strain. By highly sensitive measurements of fiber density and volume, the physical mechanism responsible for contraction under both environments was identified as boron atom diffusion out of the fiber sheath. The fiber contracts because the average volume of the resulting microvoid was determined to be only 0.26 plus or minus 0.09 the average atomic volume of the removed atom. The basic and practical implications of these results are discussed with particular emphasis on the theory, use, and limitations of heat-induced contraction as a simple cost-effective secondary processing method.

Dicarlo, J. A.↗
NASA NTRS1979

Development and Testing of Shingle-type Solar Cell Modules

The design, development, fabrication and testing of a shingle-type terrestrial solar cell module which produces 98 watts/sq m of exposed module area at 1 kW/sq m insolation and 61 C are reported. These modules make it possible to easily incorporate photovoltaic power generation into the sloping roofs of residential or commercial buildings by simply nailing the modules to the plywood roof sheathing. This design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packed hexagon configuration. These cells are individually bonded to the embossed surface of a 3 mm thick thermally tempered hexagon-shaped piece of glass. Polyvinyl butyral is used as the laminating adhesive.

Shepard, N. F., Jr.↗
NASA NTRS1979

Numerical calculations of high-altitude differential charging: Preliminary results

A two dimensional simulation program was constructed in order to obtain theoretical predictions of floating potential distributions on geostationary spacecraft. The geometry was infinite-cylindrical with angle dependence. Effects of finite spacecraft length on sheath potential profiles can be included in an approximate way. The program can treat either steady-state conditions or slowly time-varying situations, involving external time scales much larger than particle transit times. Approximate, locally dependent expressions were used to provide space charge, density profiles, but numerical orbit-following is used to calculate surface currents. Ambient velocity distributions were assumed to be isotropic, beam-like, or some superposition of these.

Laframboise, J. G.↗
NASA NTRS1979

Analytical study of the time dependent spacecraft-plasma interaction

A study of the time dependent interaction of an initially uniform equilibrium plasma with a plane conducting surface was made in order to achieve a more complete understanding of the dynamics of the charging process and of the approach to the floating potential on the surface. Numerical solutions of the cold ion equations of motion in conjunction with equilibrium electrons and Poisson's equation show the formation of an ion-rich sheath near the surface and the coupling of the non-neutral region to the undisturbed plasma through a quasineutral rarefaction. Analytical treatment of the quasineutral region showed excellent agreement (within 1 percent) with the numerical results.

Cipolla, J. W., Jr.↗
NASA NTRS1979

Spacecraft charging modeling development and validation study

The effects of spacecraft charging are presented. Analytical models of the magnetospheric environment are used to show the charging interaction between the spacecraft and the plasma sheath, the discharge phenomena, and electromagnetic coupling from the discharge to spacecraft components. Ground tests to validate the models are described.

Odonnell, E. E.↗
NASA NTRS1979

Supersonic burning in separated flow regions

Activities reported include: (1) the construction of a thermocouple with a protective coating or sheath for obtaining reliable temperature measurements of gases in the base region; (2) the construction of a multiposition back step plate for trough tests for step sizes 0.63 cm and 0.25 cm; and (3) flow pattern studies with the 6.35 cm trough to determine the complex flow resulting when a shear layer reattaches in a corner. Reliable ignition and stable burning were achieved at Mach = 2 for the 0.63 cm trough. Photographs of side wall oil streaks for M=2 flow, and some static and pitot pressure results at M = 3 are included.

Zumwalt, G. W.↗
NASA NTRS1978

Energetic plasma ions within the earth's magnetosheath

Observations in the dawn magnetosheath with the LASL/MPI fast plasma experiment on ISEE 1 and 2 reveal the existence of two distinct states of plasma flow within the sheath: a quiet state and a disturbed state. Energetic ions in the range of 3-40 keV are the distinguishing feature of the disturbed state. Long period (about 1 min) fluctuations in plasma density, temperature, flow speed, and flow direction occur simultaneously with the appearance of these high-energy particles. The most likely explanation of these observations is that the energetic ions are produced in the vicinity of the bow shock under certain (unspecified) interplanetary conditions, and that the fluctuations in plasma flow are produced locally by the interaction of the energetic ions with the ambient plasma.

Asbridge, J. R.↗
NASA NTRS1978

Differential photoelectric charging of nonconducting surfaces in space

The photoelectric charging caused by an infinitely long strip of sunlight across a nonconducting plane is studied by use of a model which contains an electrical cutoff radius, and the results of numerical calculations are presented. The model simulates charging of a sunlit area with dimensions equal to the strip's width, exposed to a plasma with a comparatively large Debye length. Uniform potential is quickly established on a uniformly sunlit strip as a result of charge redistribution by low-energy photoelectrons. The results are in accord with a theoretical surface conductivity derived for photoelectron sheaths above highly charged sunlit areas. The surface potential, which drops sharply across the sunlight-shadow boundary, is discussed.

Pelizzari, M. A.↗
NASA NTRS1978

The advanced thermionic converter with microwave power as an auxiliary ionization source

In the search for auxiliary sources of ionization for the advanced thermionic converter plasma, as required for terrestial applications, the use of externally applied microwave power is considered. The present work is part of the advanced model thermionic converter development research currently performed at the laboratory for Power and Environmental Studies at SUNY Buffalo. Microwave power in the frequency range 1-3 GHz is used to externally pump a thermionic converter and the results are compared to the theoretical model proposed by Lam (1976) in describing the thermionic converter plasma. The electron temperature of the plasma is found to be raised considerably by effective microwave heating which results in the disappearance of the double sheath ordinarily erected in front of the emitter. The experimental data agree satisfactorily with theory in the low current region.

Manikopoulos, C. N.↗
NASA NTRS1979

Current leakage for low altitude satellites

Ionospheric plasma densities exceeding 1,000,000 per cu cm exist around satellites in low earth orbit. Operation of large solar arrays at high voltage may drive substantial leakage currents through this surrounding plasma. Power losses exceeding solar cell output have been observed for small arrays biased above +2,000 V. Estimates of these effects for very large power systems are developed. Recent large scale (10 meter) lab tests are reported. Estimates based on calculations of space charge limited sheath dimensions are identified as a good working model, leading to projected power losses for large arrays increasing much more slowly than for small arrays.

Mccoy, J. E.↗
NASA NTRS1978

Increasing the FOD tolerance of composites

An experimental program was conducted for the purpose of increasing the foreign object damage tolerance of resin matrix composites in gas turbine engine fan blade applications. The superhybrid concept consisting of a resin matrix composite core surrounded by a sheath of boron/aluminum and titanium was found to be the most promising approach.

Novak, R. C.↗