Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation methods.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Materials for Extreme Environments: Paving the Way for Lunar Exploration

As humanity expands its ventures into lunar and planetary exploration, the demand intensifies for resilient materials capable of enduring extreme environmental and service conditions. The Moon’s surface presents numerous challenges, including ultra-high vacuum exposure, temperature extremes and intense radiation. Additionally, lunar regolith poses a significant threat to component durability and reusability due to its abrasive nature. Lunar dust particles scoring, adhering, or embedding into surfaces and within device-confined geometries, such as bearings, drive mechanisms and connectors, can cause premature component wear or failure. Furthermore, the interaction between the rocket plume and the surface during vehicle landings and ascents creates severe erosive conditions near critical vehicle components and adjacent infrastructure. A key barrier hindering materials discovery for lunar dust tolerant applications is a lack of standard laboratory methods to evaluate material properties and performance under representative operating conditions. A case will be presented for research activities supporting identification, processing and characterization of candidate materials in conjunction with innovations in standardized testing and qualification. Results will highlight current and emerging test methods for simulating lunar dust exposure and component degradation, paving the way for a new generation of robust materials and coatings for space exploration.

Lunar dust↗

Dust-Proofing the Future: Materials Challenges for Lunar Exploration

As humanity expands its ventures into lunar exploration, the demand intensifies for materials capable of enduring extreme environmental and service conditions. The Moon’s surface presents numerous challenges, including ultra-high vacuum exposure, temperature extremes and intense radiation. Additionally, lunar regolith threatens component durability and reusability due to its abrasive nature. Lunar dust particles scoring, adhering or embedding into surfaces and within device-confined geometries, such as bearings, drive mechanisms and connectors, can cause premature component wear or failure. Furthermore, the interaction between the rocket plume and surface during vehicle landings and ascents creates severe erosive conditions near critical vehicle components and adjacent infrastructure. A key barrier hindering materials discovery for lunar dust tolerant applications is a lack of standard laboratory methods to evaluate material properties and performance under representative operating conditions. A case will be presented for research activities supporting identification, processing and characterization of candidate materials in conjunction with innovations in standardized testing and qualification. Results will highlight current and emerging test methods for simulating lunar dust exposure and component degradation, paving the way for a new generation of robust materials and coatings for space exploration.

lunar dust↗

Modified Involute Helical Gears: Computerized Design, Simulation of Meshing and Stress Analysis

The computerized design, methods for generation, simulation of meshing, and enhanced stress analysis of modified involute helical gears is presented. The approaches proposed for modification of conventional involute helical gears are based on conjugation of double-crowned pinion with a conventional helical involute gear. Double-crowning of the pinion means deviation of cross-profile from an involute one and deviation in longitudinal direction from a helicoid surface. Using the method developed, the pinion-gear tooth surfaces are in point-contact, the bearing contact is localized and oriented longitudinally, and edge contact is avoided. Also, the influence of errors of alignment on the shift of bearing contact, vibration, and noise are reduced substantially. The theory developed is illustrated with numerical examples that confirm the advantages of the gear drives of the modified geometry in comparison with conventional helical involute gears.

COMPUTER AIDED DESIGN↗

Adaptive domain decomposition for Monte Carlo simulations on parallel processors

A method is described for performing direct simulation Monte Carlo (DSMC) calculations on parallel processors using adaptive domain decomposition to distribute the computational work load. The method has been implemented on a commercially available hypercube and benchmark results are presented which show the performance of the method relative to current supercomputers. The problems studied were simulations of equilibrium conditions in a closed, stationary box, a two-dimensional vortex flow, and the hypersonic, rarefield flow in a two-dimensional channel. For these problems, the parallel DSMC method ran 5 to 13 times faster than on a single processor of a Cray-2. The adaptive decomposition method worked well in uniformly distributing the computational work over an arbitrary number of processors and reduced the average computational time by over a factor of two in certain cases.

Wilmoth, Richard G.↗

Adaptive domain decomposition for Monte Carlo simulations on parallel processors

A method is described for performing direct simulation Monte Carlo (DSMC) calculations on parallel processors using adaptive domain decomposition to distribute the computational work load. The method has been implemented on a commercially available hypercube and benchmark results are presented which show the performance of the method relative to current supercomputers. The problems studied were simulations of equilibrium conditions in a closed, stationary box, a two-dimensional vortex flow, and the hypersonic, rarefied flow in a two-dimensional channel. For these problems, the parallel DSMC method ran 5 to 13 times faster than on a single processor of a Cray-2. The adaptive decomposition method worked well in uniformly distributing the computational work over an arbitrary number of processors and reduced the average computational time by over a factor of two in certain cases.

Wilmoth, Richard G.↗

Extravehicular mobility unit thermal simulator

The analytical methods, thermal model, and user's instructions for the SIM bay extravehicular mobility unit (EMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the crewman performing a command module extravehicular activity during transearth coast. It accounts for conductive, convective, and radiative heat transfer as well as fluid flow and associated flow control components. The program is a derivative of the Apollo lunar surface EMU digital simulator. It has the operational flexibility to accept card or magnetic tape for both the input data and program logic. Output can be tabular and/or plotted and the mission simulation can be stopped and restarted at the discretion of the user. The program was developed for the NASA-JSC Univac 1108 computer system and several of the capabilities represent utilization of unique features of that system. Analytical methods used in the computer routine are based on finite difference approximations to differential heat and mass balance equations which account for temperature or time dependent thermo-physical properties.

Hixon, C. W.↗

Modified Involute Helical Gears: Computerized Design, Simulation of Meshing, and Stress Analysis

The computerized design, methods for generation, simulation of meshing, and enhanced stress analysis of modified involute helical gears is presented. The approaches proposed for modification of conventional involute helical gears are based on conjugation of double-crowned pinion with a conventional helical involute gear. Double-crowning of the pinion means deviation of cross-profile from an involute one and deviation in longitudinal direction from a helicoid surface. Using the method developed, the pinion-gear tooth surfaces are in point-contact, the bearing contact is localized and oriented longitudinally, and edge contact is avoided. Also, the influence of errors of aligment on the shift of bearing contact, vibration, and noise are reduced substantially. The theory developed is illustrated with numerical examples that confirm the advantages of the gear drives of the modified geometry in comparison with conventional helical involute gears.

Handschuh, Robert↗

Observations of the structure and vertical transport of the polar upper ionosphere with the EISCAT VHF radar. I - Is EISCAT able to determine O(+) and H(+) polar wind characteristic? A simulation study

A method presented by Wu et al. (1992) for computing the H(+) vertical velocity from the main ionospheric parameters measured by the EISCAT VHF radar is tested in a fully controlled sequence which consists of generating an ideal ionospheric model by solving the coupled continuity and momentum equations for a two-ion plasma (O(+) and H(+)). Synthetic autocorrelation functions are generated from this model with the radar characteristics and used as actual measurements to compute the H(+) vertical velocities. Results of these simulations are shown and discussed for three cases of typical and low SNR and for low and increased mixing ratios. In most cases general agreement is found between computed H(+) velocities and generic ones with the altitude range considered, i.e., 200-1000 km. The method is shown to be reliable.

Blelly, Pierre-Louis↗

Profile Evolution Simulation in Etching Systems Using Level Set Methods

Semiconductor device profiles are determined by the characteristics of both etching and deposition processes. In particular, a highly anisotropic etch is required to achieve vertical sidewalls. However, etching is comprised of both anisotropic and isotropic components, due to ion and neutral fluxes, respectively. In Ar/Cl2 plasmas, for example, neutral chlorine reacts with the Si surfaces to form silicon chlorides. These compounds are then removed by the impinging ion fluxes. Hence the directionality of the ions (and thus the ion angular distribution function, or IAD), as well as the relative fluxes of neutrals and ions determines the amount of undercutting. One method of modeling device profile evolution is to simulate the moving solid-gas interface between the semiconductor and the plasma as a string of nodes. The velocity of each node is calculated and then the nodes are advanced accordingly. Although this technique appears to be relatively straightforward, extensive looping schemes are required at the profile corners. An alternate method is to use level set theory, which involves embedding the location of the interface in a field variable. The normal speed is calculated at each mesh point, and the field variable is updated. The profile comers are more accurately modeled as the need for looping algorithms is eliminated. The model we have developed is a 2-D Level Set Profile Evolution Simulation (LSPES). The LSPES calculates etch rates of a substrate in low pressure plasmas due to the incident ion and neutral fluxes. For a Si substrate in an Ar/C12 gas mixture, for example, the predictions of the LSPES are identical to those from a string evolution model for high neutral fluxes and two different ion angular distributions.(2) In the figure shown, the relative neutral to ion flux in the bulk plasma is 100 to 1. For a moderately isotropic ion angular distribution function as shown in the cases in the left hand column, both the LSPES (top row) and rude's string method (bottom row) predict tapered profiles. The LSPES uses an AD with a FWHM = 13.5 degrees, and rude's model uses a ratio of sheath voltage to ion temperature of 50. The more anisotropic IADs produce profiles with more vertical sidewalls and a wider bottom surface, as shown in the right hand column. Here, the LSPES has an AD with a FWHM = 2 degrees, and rude's model uses a ratio of 500 of sheath voltage to ion temperature. The agreement between the LSPES and rude's model is excellent in both cases. We will present etching profiles generated by the LSPES, including calculations of the re-emitted fluxes of both neutrals and ions off of the profile walls. In addition, we will show the effect of geometric structures (overhangs, etc.) on the etching profiles. Other physical aspects, such as surface diffusion, will also be included in the model.

Hwang, Helen H.↗

Annual Research Briefs, 2004: Center for Turbulence Research

This report contains the 2004 annual progress reports of the Research Fellows and students of the Center for Turbulence Research in its eighteenth year of operation. Since its inception in 1987, the objective of the CTR has been to advance the physical understanding of turbulent flows and development of physics based predictive tools for engineering analysis and turbulence control. Turbulence is ubiquitous in nature and in engineering devices. The studies at CTR have been motivated by applications where turbulence effects are significant; these include a broad range of technical areas such as planetary boundary layers, formation of planets, solar convection, magnetohydrodynamics, environmental and eco systems, aerodynamic noise, propulsion systems and high speed transportation. Numerical simulation has been the predominant research tool at CTR which has required a critical mass of researchers in numerical analysis and computer science in addition to core disciplines such as applied mathematics, chemical kinetics and fluid mechanics. Maintaining and promoting this interdisciplinary culture has been a hallmark of CTR and has been responsible for the realization of the results of its basic research in applications. The first group of reports in this volume are directed towards development, analysis and application of novel numerical methods for ow simulations. Development of methods for large eddy simulation of complex flows has been a central theme in this group. The second group is concerned with turbulent combustion, scalar transport and multi-phase ows. The nal group is devoted to geophysical turbulence where the problem of solar convection has been a new focus of considerable attention recently at CTR.

Moin, Parviz↗

Quantitative Technique for Comparing Simulant Materials through Figures of Merit

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication both identified and reinforced a need for a set of standards and requirements for the production and usage of the Lunar simulant materials. As NASA prepares to return to the Moon, and set out to Mars, a set of early requirements have been developed for simulant materials and the initial methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum characteristics for simulants of Lunar regolith, and 3) a method to produce simulants needed for NASA's Exploration mission. As an extension of the requirements document a method to evaluate new and current simulants has been rigorously defined through the mathematics of Figures of Merit (FoM). Requirements and techniques have been developed that allow the simulant provider to compare their product to a standard reference material through Figures of Merit. Standard reference material may be physical material such as the Apollo core samples or material properties predicted for any landing site. The simulant provider is not restricted to providing a single "high fidelity" simulant, which may be costly to produce. The provider can now develop "lower fidelity" simulants for engineering applications such as drilling and mobility applications.

Rickman, Doug↗

Experiments with Plasmas Produced by Potassium-Seeded Cyanogen Oxygen Flames for Study of Radio Transmission at Simulated Reentry Vehicle Plasma Conditions

A method for the chemical production of an ionized gas stream for application to radio transmission studies is described. Involved is the combustion of gaseous cyanogen and oxygen with the addition of vaporized potassium in some cases to further increase the ionization. Experiments are described in which a 3-inch-diameter subsonic free jet at atmospheric pressure is used, and the results are presented. The plasma obtained by using this method is sufficient to simulate plasma conditions expected for reentering hypersonic vehicles. The unseeded plasma stream temperature is indicated to be about 4,200 K, with the degree of ionization indicated to be that expected from thermal equilibrium considerations. Measurements of radio-signal loss due to the unseeded flame plasma are presented for microwaves of 8 to 20 kmc transmitted through the stream and for a dipole transmitting model of 219.5 mc immersed in the stream. Favorable comparison of these results with the simple plane-wave signal-attenuation theory was obtained. In the case of a 9.4-kmc microwave signal of 30-kw peak power, the preliminary indication is that the plasma characteristics were not changed due to this strong signal. Comparison of a simplified concept of radio-signal attenuation due to plasmas is made with some hypersonic reentry vehicle signal-loss data. Other areas of plasma research using this method for the transmission problem are indicated.

Huber, Paul W.↗

Multigrid Methods for Fully Implicit Oil Reservoir Simulation

In this paper we consider the simultaneous flow of oil and water in reservoir rock. This displacement process is modeled by two basic equations: the material balance or continuity equations and the equation of motion (Darcy's law). For the numerical solution of this system of nonlinear partial differential equations there are two approaches: the fully implicit or simultaneous solution method and the sequential solution method. In the sequential solution method the system of partial differential equations is manipulated to give an elliptic pressure equation and a hyperbolic (or parabolic) saturation equation. In the IMPES approach the pressure equation is first solved, using values for the saturation from the previous time level. Next the saturations are updated by some explicit time stepping method; this implies that the method is only conditionally stable. For the numerical solution of the linear, elliptic pressure equation multigrid methods have become an accepted technique. On the other hand, the fully implicit method is unconditionally stable, but it has the disadvantage that in every time step a large system of nonlinear algebraic equations has to be solved. The most time-consuming part of any fully implicit reservoir simulator is the solution of this large system of equations. Usually this is done by Newton's method. The resulting systems of linear equations are then either solved by a direct method or by some conjugate gradient type method. In this paper we consider the possibility of applying multigrid methods for the iterative solution of the systems of nonlinear equations. There are two ways of using multigrid for this job: either we use a nonlinear multigrid method or we use a linear multigrid method to deal with the linear systems that arise in Newton's method. So far only a few authors have reported on the use of multigrid methods for fully implicit simulations. Two-level FAS algorithm is presented for the black-oil equations, and linear multigrid for two-phase flow problems with strong heterogeneities and anisotropies is studied. Here we consider both possibilities. Moreover we present a novel way for constructing the coarse grid correction operator in linear multigrid algorithms. This approach has the advantage in that it preserves the sparsity pattern of the fine grid matrix and it can be extended to systems of equations in a straightforward manner. We compare the linear and nonlinear multigrid algorithms by means of a numerical experiment.

Molenaar, J.↗

Applications of the conjugate gradient FFT method in scattering and radiation including simulations with impedance boundary conditions

The theoretical and computational aspects related to the application of the Conjugate Gradient FFT (CGFFT) method in computational electromagnetics are examined. The advantages of applying the CGFFT method to a class of large scale scattering and radiation problems are outlined. The main advantages of the method stem from its iterative nature which eliminates a need to form the system matrix (thus reducing the computer memory allocation requirements) and guarantees convergence to the true solution in a finite number of steps. Results are presented for various radiators and scatterers including thin cylindrical dipole antennas, thin conductive and resistive strips and plates, as well as dielectric cylinders. Solutions of integral equations derived on the basis of generalized impedance boundary conditions (GIBC) are also examined. The boundary conditions can be used to replace the profile of a material coating by an impedance sheet or insert, thus, eliminating the need to introduce unknown polarization currents within the volume of the layer. A general full wave analysis of 2-D and 3-D rectangular grooves and cavities is presented which will also serve as a reference for future work.

Barkeshli, Kasra↗

Determining the transferability of flight simulator data

This paper presented a method for collecting and graphically correlating subjective ratings and objective flight test data. The method enables flight-simulation engineers to enhance the simulator characterization of rotor craft flight in order to achieve maximum transferability of simulator experience.

Green, David↗

Monte Carlo simulation of the terrestrial hydrogen exosphere

Methods for Monte Carlo simulation of planetary exospheres have evolved from early work on the lunar atmosphere, where the regolith surface provides a well defined exobase. A major limitation of the successor simulations of the exospheres of Earth and Venus is the use of an exobase surface as an artifice to separate the collisional processes of the thermosphere from a collisionles exosphere. In this paper a new generalized approach to exosphere simulation is described, wherein the exobase is replaced by a barometric depletion of the major constitents of the thermosphere. Exospheric atoms in the thermosphere-exosphere transition region, and in the outer exosphere as well, travel in ballistic trajectories that are interrupted by collisons with the background gas, and by charge exchange interactions with ionospheric particles. The modified simulator has been applied to the terrestrial hydrogen exosphere problem, using velocity dependent differential cross sections to provide statistically correct collisional scattering in H-O and H-H(+) interactions. Global models are presented for both solstice and equinox over the effective solar cycle range of the F(sub 10.7) index (80 to 230). Simulation results show significant differences with previous terrestrial exosphere models, as well as with the H distributions of the MSIS-86 thermosphere model.

Hodges, R. Richard, Jr.↗

Development of a Perfectly Matched Layer Technique for a Discontinuous-Galerkin Spectral-Element Method

The numerical simulation of many aerodynamic non-periodic flows of practical interest involves discretized computational domains that often must be artificially truncated. Appropriate boundary conditions are required at these truncated domain boundaries, and ideally, these boundary conditions should be perfectly "absorbing" or "nonreflecting" so that they do not contaminate the flow field in the interior of the domain. The proper specification of these boundaries is critical to the stability, accuracy, convergence, and quality of the numerical solution, and has been the topic of considerable research. The need for accurate boundary specification has been underscored in recent years with efforts to apply higher-fidelity methods (DNS, LES) in conjunction with high-order low-dissipation numerical schemes to realistic flow configurations. One of the most popular choices for specifying these boundaries is the characteristics-based boundary condition where the linearized flow field at the boundaries are decomposed into characteristic waves using either one-dimensional Riemann or other multi-dimensional Riemann approximations. The values of incoming characteristics are then suitably modified. The incoming characteristics are specified at the in flow boundaries, and at the out flow boundaries the variation of the incoming characteristic is zeroed out to ensure no reflection. This, however, makes the problem ill-posed requiring the use of an ad-hoc parameter to allow small reflections that make the solution stable. Generally speaking, such boundary conditions work reasonably well when the characteristic flow direction is normal to the boundary, but reflects spurious energy otherwise. An alternative to the characteristic-based boundary condition is to add additional "buffer" regions to the main computational domain near the artificial boundaries, and solve a different set of equations in the buffer region in order to minimize acoustic reflections. One approach that has been used involves modeling the pressure fluctuations as acoustic waves propagating in the far-field relative to a single noise-source inside the buffer region. This approach treats vorticity-induced pressure fluctuations the same as acoustic waves. Another popular approach, often referred to as the "sponge layer," attempts to dampen the flow perturbations by introducing artificial dissipation in the buffer region. Although the artificial dissipation removes all perturbations inside the sponge layer, incoming waves are still reflected from the interface boundary between the computational domain and the sponge layer. The effect of these refkections can be somewhat mitigated by appropriately selecting the artificial dissipation strength and the extent of the sponge layer. One of the most promising variants on the buffer region approach is the Perfectly Matched Layer (PML) technique. The PML technique mitigates spurious reflections from boundaries and interfaces by dampening the perturbation modes inside the buffer region such that their eigenfunctions remain unchanged. The technique was first developed by Berenger for application to problems involving electromagnetic wave propagation. It was later extended to the linearized Euler, Euler and Navier-Stokes equations by Hu and his coauthors. The PML technique ensures the no-reflection property for all waves, irrespective of incidence angle, wavelength, and propagation direction. Although the technique requires the solution of a set of auxiliary equations, the computational overhead is easily justified since it allows smaller domain sizes and can provide better accuracy, stability, and convergence of the numerical solution. In this paper, the PML technique is developed in the context of a high-order spectral-element Discontinuous Galerkin (DG) method. The technique is compared to other approaches to treating the in flow and out flow boundary, such as those based on using characteristic boundary conditions and sponge layers. The superiority of the current PML technique over other approaches is demonstrated for a range of test cases, viz., acoustic pulse propagation, convective vortex, shear layer flow, and low-pressure turbine cascade flow. The paper is structured as follows. We first derive the PML equations from the non{linear Euler equations. A short description of the higher-order DG method used is then described. Preliminary results for the four test cases considered are then presented and discussed. Details regarding current work that will be included in the final paper are also provided.

Spectral↗