Search NASA⌕ Search

SEARCH · Search NASA

Results for “Strategy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Strategy for Texture Management in Metals Additive Manufacturing

Additive manufacturing (AM) technologies have long been recognized for their ability to fabricate complex geometric components directly from models conceptualized through computers, allowing for complicated designs and assemblies to be fabricated at lower costs, with shorter time to market, and improved function. Lacking behind the design complexity aspect is the ability to fully exploit AM processes for control over texture within AM components. Currently, standard heat-fill strategies utilized in AM processes result in largely columnar grain structures. Here, we propose a point heat source fill for the electron beam melting (EBM) process through which the texture in AM materials can be controlled. Using this point heat source strategy, the ability to form either columnar or equiaxed grain structures upon solidification through changes in the process parameters associated with the point heat source fill is demonstrated for the nickel-base superalloy, Inconel 718. Mechanically, the material is demonstrated to exhibit either anisotropic properties for the columnar-grained material fabricated through using the standard raster scan of the EBM process or isotropic properties for the equiaxed material fabricated using the point heat source fill.

36 MATERIALS SCIENCE↗

Establishing a Design Strategy for Corrosion Resistant Structural Materials in Molten Salt Technologies

To address the gap in material design strategies for structural components in molten salt-powered technologies, the current work aimed to identify key parameters governing corrosion induced degradation of materials during exposures in molten halide salts. The applicability of the data on dissolution rates of pure metals (e.g., Cr) in a given molten salt to enable predictions of corrosion behavior of multicomponent binary and ternary Fe-based model and Ni-based commercial alloys isothermally exposed in the purified KCl-MgCl 2 in quartz capsules at 700 and 800°C was evaluated. The influence of alloy chemistry on initial dissolution rates and the consequent impact on the time-dependent corrosion induced microstructural evolution in the alloy subsurface was predicted with a coupled thermodynamic-kinetic model. Finally, the model was well able to predict the Cr depletion in all investigated alloys demonstrating the ability of the proposed approach to enable a unique design strategy for structural materials in molten salts.

36 MATERIALS SCIENCE↗

Informing electrification strategies of residential neighborhoods with urban building energy modeling

Electrifying end uses is a key strategy to reducing GHG emissions in buildings. However, it may increase peak electricity demand that triggers the need to upgrade the existing power distribution system, leading to delays in electrification and needs of significant investment. There is also concern that building electrification may cause an increase of energy costs, leading to further energy burden for low-income communities. This study uses the urban scale building modeling tool CityBES to assess the electrification impacts of more than 43,000 residential buildings in a neighborhood of Portland, Oregon, USA. Energy efficiency upgrades were investigated on their potential to mitigate the increase of peak electricity demand and energy burden. Simulation results from the calibrated EnergyPlus models show that electrification with heat pumps for space heating and cooling as well as for domestic water heating can reduce CO2e emissions by 38%, but increase peak electricity demand by about 9% from the baseline building stock. Combining electrification measures and energy efficiency upgrades can reduce CO2e emissions by 48% while reducing peak electricity demand by 6% and saving the median household energy costs by 28%. City and utility decision makers should consider integrating energy efficiency upgrades with electrification measures as an effective residential building electrification strategy, which significantly reduces carbon emissions, caps or even decreases peak demand while reducing energy burden of residents.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

High-Resolution Simulation of Snowfall over the Korean Eastern Coastal Region Using WRF Model: Sensitivity to Domain Nesting-Down Strategy

The eastern coastal area of the Korean Peninsula, Yeongdong region, often experiences severe snowfall during the winter season. We studied here the development mechanism of a snowfall case occurred in February 2014 using the Weather Research and Forecasting (WRF) model at the convection-permitting resolution of 1 km. The model reasonably captured the observed snowfall, and three factors were discovered as important contributors to this snowfall case: a temperature contrast between land and ocean, a high-pressure system over the northeastern part of the Korean Peninsula, and the mountainous terrain. Cold and dry air blown from the high-pressure system gains heat and moisture when it passes over the East Sea enhancing the low-level instability. When the air mass reaches the coastline, updraft is generated by the density difference with the continental atmosphere and by the mountain slope. Further sensitivity experiments were conducted by adjusting strategies of nesting down (offline and online). Sensitivity experiments consist of three offline nesting experiments with different boundary condition update frequencies in 6, 3 and 1 h and one online nesting experiment that updates the boundary condition every integration time step. The major snowfall along the mountain range located in the middle of domain does not change significantly regardless of the nesting frequency. The offline nesting causes unphysical discontinuities of precipitation along the north and east sides of lateral boundary where wind blows in, which are caused by the absence of condensed hydrometeor variables in the lateral boundary condition. The domain nesting strategy tested in this study has dramatically impacted on the upper troposphere structure in the model: artificial fluctuations at the upper troposphere in the offline nesting simulations were significantly alleviated in the online nesting simulation.

54 ENVIRONMENTAL SCIENCES↗

A Strategy Combining Higher Energy C-Trap Dissociation with Neutral Loss- and Product Ion-Based MS{sup n} Acquisition for Global Profiling and Structure Annotation of Fatty Acids Conjugates

Fatty acids conjugates (FACs) are ubiquitous but found in trace amounts in the natural world. They are composed of multiple unknown substructures and side chains. Thus, FACs are difficult to be analyzed by traditional mass spectrometric methods. In this study, an integrated strategy was developed to global profiling and targeted structure annotation of FACs in complex matrix by LTQ Orbitrap. Dicarboxylic acid conjugated bufotoxins (DACBs) in Venenum bufonis (VB) were used as model compounds. The new strategy (abbreviated as HPNA) combined higher-energy C-trap dissociation (HCD) with product ion- (PI), neutral loss- (NL) based MS{sup n} (n ≥ 3) acquisition in both positive-ion mode and negative-ion mode. Several advantages are presented. First, various side chains were found under HCD in negative-ion mode, which included both known and unknown side chains. Second, DACBs with multiple side chains were simultaneously detected in one run. Compared with traditional quadrupole-based mass method, it greatly increased analysis throughput. Third, the fragment ions of side chain and steroids substructure could be obtained by PI- and NL-based MS{sup n} acquisition, respectively, which greatly increased the accuracy of the structure annotation of DACBs. In all, 78 DACBs have been discovered, of which 68 were new compounds; 25 types of substructure formulas and seven dicarboxylic acid side chains were found, especially five new side chains, including two saturated dicarboxylic acids [(azelaic acid (C{sub 9}) and sebacic acid (C{sub 10})] and three unsaturated dicarboxylic acids (u-C{sub 8}, u-C{sub 9}, and u-C{sub 10}). All these results greatly enriched the structures of DACBs in VB. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V

During the laser-powder bed fusion (L-PBF) process, high laser intensities, short interaction times and highly localized heat input drive large thermal gradients that result in a state of high residual stresses. Generally, the residual stresses that develop during the L-PBF process can compromise the performance of the component. Up to now, the literature has indicated that the magnitude of the residual stresses can be affected by various process parameters. In this study, all process parameters such as laser power and speed are held fixed and the focus is solely on the effect of the laser scan strategy on the three-dimensional residual stress state of L-PBF metallic components. Four Ti-6Al-4V bridge shaped components were built using island and continuous scanning patterns parallel and offset 45° from the sample axes. High-energy X-ray diffraction was used to determine the residual stress field in each of the components. Two of them were re-measured after being partially removed from the build plate. The assumptions implicit in diffraction measurements of stress are reviewed and discussed in depth because the unique microstructure associated with L-PBF Ti-6Al-4V renders the validity of those assumptions uncertain. Specifically, additional data was collected and analyzed to evaluate the relationship between grain scale and macroscopic scale stresses. The observed residual stresses were large, ½ to ¾ of the yield strength, particularly the build direction stresses near the lateral edges of the bridges. Here in this work, the higher stresses were observed in the bridges built via the island scan strategies, chiefly near the edges of the parts.

36 MATERIALS SCIENCE↗

A coupled hydrologic-agroeconomic modeling framework to evaluate adaptive irrigation strategies under groundwater withdrawal restrictions

Growing groundwater scarcity requires integrated tools to capture interactions among hydrology, agricultural production, markets, and land use. This study presents an iterative modeling framework that couples hydrologic, crop-yield, and economic models to capture two-way feedback among water availability, agricultural production, and market responses under groundwater constraints. The primary goal of this paper is to describe the methodological development of the coupled framework and demonstrate the significance of iterative model interaction. Applied to the western United States, we evaluated adaptive responses to restricting groundwater use beyond recharge levels, represented through changes in irrigation management and expansion or shrinkage of crop markets through land reallocation. Results demonstrate that the iterative coupling converges to stable equilibrium responses within 10 iterations. At equilibrium, deficit irrigation emerges as the dominant adaptation strategy in California, with irrigation levels stabilizing at approximately 70% of full irrigation demand, while Arizona and New Mexico experience stronger yield sensitivities. Early iterations produce commodity price increases of up to 10% for fruit and vegetable crops; however, these responses moderate as land allocation and production patterns adjust across regions. Deficit irrigation and spatial reallocation of irrigated land partially offset production losses, with variability observed across different states: California maintains yields primarily via deficit irrigation, whereas Arizona and New Mexico will rely mainly on reducing irrigated area to absorb the shock. By capturing feedback between biophysical and economic processes, this approach highlights how irrigation strategies and land-use decisions evolve under water stress and provides a transferable platform for evaluating water management policies.

54 ENVIRONMENTAL SCIENCES↗

Outdoor annual algae productivity improvements at the pre-pilot scale through crop rotation and pond operational management strategies

The Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) collaborative consortium operated pre-pilot scale outdoor ponds to deliver much-needed multi-year, long-term and consistent, algae cultivation data relevant to understanding the current state of technology in terms of expected seasonal algae biomass productivity. Over the course of four years from 2018 to 2021, twelve identical 4.2 m 2 mini-ponds were run in triplicate sets to test strains and operational strategies demonstrated in small-, indoor photobioreactors, in pursuit of increasing overall algae areal productivity and projected farm yield. Fourteen different cultivars derived from a strain screening pipeline were tested. Through deliberate seasonal crop rotation and improvements in operational strategies, annual biomass productivity increased from 11.6 to 17.6 g m -2 day -1 , a > 50% increase over the 2018 baseline. Both brackish and marine strains were included and four out of the fourteen strains consistently yielded high productivity across multiple years; brackish strains Monoraphidium minutum (26BAM) and Scenedesmus obliquus (UTEX393), and marine strains Tetraselmis striata (LANL1001) and Picochlorum celeri (TG2). These freely available datasets, which represent nearly complete annual daily coverage of cultivation metrics including weather, pond temperature and pH, nutrients, and productivity, are unique in the public domain and seek to fill agronomic and operational knowledge gaps to help in the eventual commercialization of algal biofuels and bioproducts.

09 BIOMASS FUELS↗

Multiphysics analysis of fuel fragmentation, relocation, and dispersal susceptibility–Part 1: Overview and code coupling strategies

The US nuclear energy industry is investigating strategies to increase the reactor operating cycle to 24 months, resulting in peak rod average burnups exceeding the current limit of 62 GWd/tU. This increase will in turn increase the probability of fuel fragmentation, relocation, and dispersal (FFRD) in the event of a loss-of-coolant accident (LOCA). This effort couples multiple codes to (1) evaluate full-core power histories for high-burnup fuel operated in a Westinghouse 4-loop pressurized water reactor, (2) model a postulated large-break LOCA, and (3) calculate the mass of fuel susceptible to FFRD. This paper, the first of three describing the work, focuses on code coupling strategies and FFRD susceptibility calculations. The other two companion papers focus on code-specific designs and analyses. Three codes were used in this work. VERA was used to calculate steady-state power histories, TRACE was used to model the transient thermal hydraulics, and BISON was used to model steady-state and transient fuel performance and cladding failure. Herein, several fuel pulverization models were used to calculate FFRD susceptibility in failed rods. Depending on the cladding failure/fuel pulverization model combination, the core-wide FFRD susceptibility during the postulated LOCA range from 0 to over 5,000 kg.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

End-of-injection fuel dribble of multi-hole diesel injector: Comprehensive investigation of phenomenon and discussion on control strategy

The needle shutdown of fuel injectors leads to an undesired fuel dribble that forms unburned hydrocarbons and decreases the engine thermal efficiency in modern engines. Understanding of the fuel dribbling process is of great importance to establish its minimization strategy for optimal use of conventional fuels. However, the detailed needle dynamics and in- and near-nozzle flow characteristics governing the fuel dribble process have not been thoroughly understood. In this study, the needle dynamics, in- and near-nozzle flow characteristics and fuel dribble of a mini-sac type three-hole diesel injector were investigated using a highspeed X-ray phase-contrast imaging technique at different injection pressures. The results showed that an increase in injection pressure increased the flow evacuation velocity at the needle close that induced a more intense fuel cavitation and air ingestion inside the nozzle. The fuel dribbling process showed a high shot-toshot deviation. A statistical analysis of 50-shot results exhibited two breakup modes of fuel dribble determined by the flow evacuation velocity at the needle close and presence of air ingestion. In the first mode, the fast breakup with a short residence time of fuel dribble occurred. Meanwhile, the dripping of undisturbed liquid column with a long residence time of fuel dribble occurred in the second mode. An increase in injection pressure increased the population of the first mode due to more intense air ingestion that primarily caused by an increase in needle closing speed other than an increase in peak injection velocity. Based on the results, the formation mechanism and control strategies of the fuel dribble from modern diesel injectors were discussed.

Moon, Seoksu↗

Probe into Gaseous Pollution and Assessment of Air Quality Benefit under Sector Dependent Emission Control Strategies over Megacities in Yangtze River Delta, China

On February 29th 2012, China published its new National Ambient Air Quality Standard (CH-NAAQS) aiming at revising the standards and measurements for both gaseous pollutants including ozone (O3), nitrogen dioxide (NO2), and sulfur dioxide (SO2), and also particle pollutants including PM10 and PM2.5. In order to understand the air pollution status regarding this new standard, the integrated MM5/CMAQ modeling system was applied over Yangtze River Delta (YRD) within this study to examine the criteria gaseous pollutants listed in the new CH-NAAQS. Sensitivity simulations were also conducted to assess the responses of gaseous pollutants under 8 different sector-dependent emission reduction scenarios in order to evaluate the potential control strategies. 2006 was selected as the simulation year in order to review the air quality condition at the beginning of China’s 11th Five-Year-Plan (FYP, from 2006 to 2010), and also compared with air quality status in 2010 as the end of 11th FYP to probe into the effectiveness of the national emission control efforts. Base case simulation showed distinct seasonal variation for gaseous pollutants: SO2, and NO2 were found to have higher surface concentrations in winter while O3 was found to have higher concentrations in spring and summer than other seasons. According to the analyses focused on 3 megacities within YRD, Shanghai, Nanjing, and Hangzhou, we found different air quality conditions among the cities: NO2 was the primary pollutant that having the largest number of days exceeding the CH-NAAQS daily standard (80 μg/m3) in Shanghai (59 days) and Nanjing (27 days); SO2 was the primary pollutant with maximum number of days exceeding daily air quality standard (150 μg/m3) in Hangzhou (28 days), while O3 exceeding the daily maximum 8-hour standard (160 μg/m3) for relatively fewer days in all the three cities (9 days in Shanghai, 14 days in Nanjing, and 11 days in Hangzhou). Simulation results from predefined potential applicable emission control scenarios suggested significant air quality improvements from emission reduction: 90% of SO2 emission removed from power plant in YRD would be able to reduce more than 85% of SO2 pollution, 85% NOx emission reduction from power plant would reduce more than 60% of NO2 pollution, in terms of reducing the number of days exceeding daily air quality standard. NOx emission reduction from transportation and industry were also found to effectively reduce NO2 pollution but less efficient than emission control from power plants. We also found that multi-pollutants emission control including both NOx and VOC would be a better strategy than independent NOx control over YRD which is China’s 12th Five-Year-Plan (from 2011 to 2015), because O3 pollution would be increased as a side effect of NOx control and counteract NO2 pollution reduction benefit.

Chinese National Air Quality Standard↗

Distributed formation control with open-loop Nash strategy

In this paper, we investigate game theoretical multiagent formation control problem. The main challenge of this problem is how to enable local execution of game strategies, e.g., Nash equilibrium, which generally requires global information in the presence of communication topology among agents. Toward this, we first derive open-loop Nash equilibrium for agents minimizing formation error based performance indices and proceed to introduce a distributed estimation scheme to facilitate local implementation of the derived Nash strategies. In addition, a shrinking horizon control technique is integrated into the proposed scheme to handle unexpected state changes. Finally, the proposed scheme is fully distributed and ensures an ϵ-Nash equilibrium. An illustrative examples is presented to verify the effectiveness.

42 ENGINEERING↗

Increased extracellular pressure provides a novel adjuvant stimulus for enhancement of conventional dendritic cell maturation strategies

Dendritic cell (DC)-based vaccine strategies have gained increasing popularity in recent years. Methods for ex vivo generation of immunocompetent mature DCs still require optimization. DCs have been shown to phenotypically mature under elevated pressure. We compared the effects of pressure on DC maturation with LPS- and cytokine-stimulation. Human monocyte-derived immature or LPS- and cytokine-matured DCs were exposed to ambient or 40 mmHg increased pressure for 12 h, then assessed for expression of CD80, CD86, CD40, MHC-I/II, and inflammatory cytokine production. DCs were also evaluated for capacity to stimulate T-cell proliferation by co-culture with allogeneic lymphocytes. Pressure significantly increased cytokine production and expression of all surface molecules on immature DC other than MHC-I and CD40. Pressure/LPS-treated DCs displayed further upregulation of MHC-I, CD40, and IL-12p70. Cytokine-matured DCs appeared less responsive to pressure. T-cell proliferation correlated with MHC expression. Results suggest mechanical stimulation of DCs may provide a useful adjuvant to TLR-agonist maturation strategies.

60 APPLIED LIFE SCIENCES↗

Surface-assisted DNA self-assembly: An enzyme-free strategy towards formation of branched DNA lattice

DNA based self-assembled nanostructures and DNA origami has proven useful for organizing nanomaterials with firm precision. However, for advanced applications like nanoelectronics and photonics, large-scale organization of self-assembled branched DNA (bDNA) into periodic lattices is desired. In this communication for the first time we report a facile method of self-assembly of Y-shaped bDNA nanostructures on the cationic surface of Aluminum (Al) foil to prepare periodic two dimensional (2D) bDNA lattice. Particularly those Y-shaped bDNA structures having smaller overhangs and unable to self-assemble in solution, they are easily assembled on the surface of Al foil in the absence of ligase. Field emission scanning electron microscopy (FESEM) analysis shows homogenous distribution of two-dimensional bDNA lattices across the Al foil. When the assembled bDNA structures were recovered from the Al foil and electrophoresed in nPAGE only higher order polymeric bDNA structures were observed without a trace of monomeric structures which confirms the stability and high yield of the bDNA lattices. Therefore, this enzyme-free economic and efficient strategy for developing bDNA lattices can be utilized in assembling various nanomaterials for functional molecular components towards development of DNA based self-assembled nanodevices. - Highlights: • Al foil surface-assisted self-assembly of monomeric structures into larger branched DNA lattice. • FESEM study confirms the uniform distribution of two-dimensional bDNA lattice structures across the surface of Al foil. • Enzyme-free and economic strategy to prepare higher order structures from simpler DNA nanostructures have been confirmed by recovery assay. • Use of well proven sequences for the preparation of pure Y-shaped monomeric DNA nanostructure with high yield.

60 APPLIED LIFE SCIENCES↗

A strategy based on thermal flexibility to design triosephosphate isomerase proteins with increased or decreased kinetic stability

Kinetic stability of proteins determines their susceptibility to irreversibly unfold in a time-dependent process, and therefore its half-life. A residue displacement analysis of temperature-induced unfolding molecular dynamics simulations was recently employed to define the thermal flexibility of proteins. This property was found to be correlated with the activation energy barrier (E{sub act}) separating the native from the transition state in the denaturation process. The E{sub act} was determined from the application of a two-state irreversible model to temperature unfolding experiments using differential scanning calorimetry (DSC). The contribution of each residue to the thermal flexibility of proteins is used here to propose multiple mutations in triosephosphate isomerase (TIM) from Trypanosoma brucei (TbTIM) and Trypanosoma cruzi (TcTIM), two parasites closely related by evolution. These two enzymes, taken as model systems, have practically identical structure but large differences in their kinetic stability. We constructed two functional TIM variants with more than twice and less than half the activation energy of their respective wild-type reference structures. The results show that the proposed strategy is able to identify the crucial residues for the kinetic stability in these enzymes. As it occurs with other protein properties reflecting their complex behavior, kinetic stability appears to be the consequence of an extensive network of inter-residue interactions, acting in a concerted manner. The proposed strategy to design variants can be used with other proteins, to increase or decrease their functional half-life.

60 APPLIED LIFE SCIENCES↗

New strategy for liquefying corn stover pellets

The movement of solid material into and between unit operations within a biorefinery is a bottleneck in reaching design capacity, with formation of biomass slurries needed to introduce feedstock. Corn stover slurries have been achieved from dilute acid, pretreated materials resulting in slurry concentrations of up to about 150 g/L, above which flowability is compromised. We report a new strategy to liquefy corn stover at higher solids concentration (300 g/L) by initially cooking it with the enzyme mimetic maleic acid at 40 mM and 150°C. This is followed by 6 h of enzymatic modification at 1 FPU (2.2 mg protein)/g solids, resulting in a yield stress of 171 Pa after 6 h and 58 Pa in 48 h compared to 6806 Pa for untreated stover. Mimetic treatment of corn stover pellets minimizes the inhibitory effect of xylo-oligomers on hydrolytic enzymes. Furthermore, this strategy allows for the delivery of solid lignocellulosic slurry into a pretreatment reactor by pumping, improving operability of a biorefinery.

09 BIOMASS FUELS↗

Strategies to overcome mass transfer limitations of hydrogen during anaerobic gaseous fermentations: A comprehensive review

Fermentation of gaseous substrates such as carbon dioxide (CO 2 ) has emerged as a sustainable approach for transforming greenhouse gas emissions into renewable fuels and biochemicals. CO 2 fermentations are catalyzed by hydrogenotrophic methanogens and homoacetogens, these anaerobic microorganisms selectively reduce CO 2 using hydrogen (H 2 ) as electron donor. However, H 2 possesses low solubility in liquid media leading to slow mass transport, limiting the reaction rates of CO 2 reduction. Solving the problems of mass transport of H 2 could boost the advance of technologies for valorizing industrial CO 2 -rich streams, like biogas or syngas. The application could further be extended to combustion flue gases or even atmospheric CO 2 . In this work, an overview of strategies for overcoming H 2 mass transport limitations during methanogenic and acetogenic fermentation of H 2 and CO 2 is presented. Here, the potential for using these strategies in future full-scale facilities and the knowledge gaps for these applications are discussed in detail.

09 BIOMASS FUELS↗

Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies

Microbial conversion of bioenergy-derived waste glycerol into value-added chemicals has emerged as an important bioprocessing technology due to its eco-friendliness, feasible technoeconomics, and potential to provide sustainability in biodiesel and bioethanol production. Glycerol is an abundant liquid waste from bioenergy plants with a projected volume of 6 million tons by 2025, accounting for about 10% of biodiesel and 2.5% of bioethanol yields. 3-Hydroxypropionic acid (3-HP) is a major product of glycerol bioconversion, which is the third largest biobased platform compound with expected market size and value of 3.6 million tons/year and USD 10 billion/year, respectively. Despite these biorefinery values, 3-HP biosynthesis from glycerol is still at an immature stage of commercial exploitation. The main challenges behind this immaturity are the toxic effects of 3-HPA on cells, the distribution of carbon flux to undesirable pathways, low tolerance of cells to glycerol and 3-HP, co-factor dependence of enzymes, low enzyme activity and stability, and the problems of substrate inhibition and specificity of enzymes. To address these challenges, it is necessary to understand the fundamentals of glycerol bioconversion and 3-HP production in terms of metabolic pathways, related enzymes, cell factories, midstream process configurations, and downstream 3-HP recovery, as discussed in this review critically and comprehensively. It is equally important to know the current challenges and limitations in 3-HP production, which are discussed in detail along with recent research efforts and remaining gaps. Finally, possible research strategies are outlined considering the recent technological advances in microbial biosynthesis, aiming to attract further research efforts to achieve a sustainable and industrially exploitable 3-HP production technology. Here, by discussing the use of advanced tools and strategies to overcome the existing challenges in 3-HP biosynthesis, this review will attract researchers from many other similar biosynthesis technologies and provide a common gateway for their further development.

59 BASIC BIOLOGICAL SCIENCES↗