Search NASA⌕ Search

SEARCH · Search NASA

Results for “Threading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Adjustable gas-flow restrictor

Flow restrictor uses long narrow helical path between mating threads to effect simultaneous pressure and temperature reduction of flowing gases within short axial distance. Pressure drop can be adjusted simply by screwing or unscrewing threaded parts to increase or decrease flow path.

Brown, J. J.↗

Acoustic energy shaping

A suspended mass is shaped by melting all or a selected portion of the mass and applying acoustic energy in varying amounts to different portions of the mass. In one technique for forming an optical waveguide slug, a mass of oval section is suspended and only a portion along the middle of the cross-section is heated to a largely fluid consistency. Acoustic energy is applied to opposite edges of the oval mass to press the unheated opposite edge portions together so as to form bulges at the middle of the mass. In another technique for forming a ribbon of silicon for constructing solar cells, a cylindrical thread of silicon is drawn from a molten mass of silicon, and acoustic energy is applied to opposite sides of the molten thread to flatten it into a ribbon.

Wang, T. G.↗

A tool for installation and removal of cylindrical baffles

Simple tool based on principle of automobile oil wrench slips over cylindrical thread-on baffle to install or remove it from baffle assembly. Tool consists of curled metal sheet brazed onto handgrip. Handgrip is adapted to be driven by wrench, ratchet, extension, torque wrench, or some other convenient tool. Clockwise twist of handgrip, tightens metal sheet around baffle to advance it into threaded joint. Counterclockwise twist loosens sheet for repositioning or tool removal.

Pessin, R.↗

Energetic particle precipitation into the high-latitude ionosphere and the auroral electrojets. I - Definition of electrojet boundaries using energetic electron spectra and ground-based magnetometer data

Magnetometric data are used to define the poleward and equatorward borders of the eastward electrojet in the evening sector. The relationship between central plasma sheet (cps) and boundary plasma sheet (bps) and the auroral electrojet region is explored. This relationship is used to infer the electric field configuration in the cps and bps regions. It is shown that in the evening sector the cps is threaded by field lines carrying current flowing into the ionosphere, while the bps is threaded by field lines carrying current flowing out of the ionosphere.

Winningham, J. D.↗

Spraying suspensions uniformly

With head on each of its ends, bolt can be disengaged from its blind side. Bolt has conventional hexagonal head on one end and smaller hexagonal head on its threaded end. Since reduced head is smaller than bolt diameter, it does not interfere with insertion of bolt shank in bolthole. However, it can be turned by wrench to release bolt from its blind (threaded) end. Bolt should be tethered on its large-head end so that it does not drop away from assembly.

Prasthofer, W. P.↗

Spacecraft automatic umbilical system

An umbilical system design is described that incorporates all the features specified for a power system to payload interconnect capability. A proof-of-concept prototype of the umbilical system was built to determine experimentally the suitability of the threading characteristics of the ram mechanism and to verify freedom from cross threading. It is concluded that Berthing systems that utilize remote manipulator systems (RMS) can be simplified by using RMS targets, closed circuit TV cameras, tie into the RMS control system, and grapple-fixture and end-effector-like capture and secure mechanisms. To effect a remotely controlled umbilical interconnect in proximity with a manned spacecraft and to provide for extravehicular activity backup and maintenance capabilities, 18 different mechanisms are found to be necessary. The weight impact of proving for maintenance capability in a large multiple connector umbilical system was found to be in the order of +60 percent.

Goldin, R. W.↗

Foldable beam

A foldable beam possessing superior qualities of light weight, compactness for transportation, quick deployment with minimum use of force, and high strength is described. These qualities are achieved through the use of a series of longitudinally rigid segments, hinged along one side and threaded by one or two cables along the opposite side. Tightening the cables holds the beam extended. Loosening the cables permits the segments to fold away from the threaded side. In one embodiment the segments are connected by canted hinges with the result that the beam may be folded in a helix-like configuration around a cylinder. In another embodiment the segments themselves may be hinged to fold flat laterally as the beam is folded, resulting in a configuration that may be helixed around a shorter cylinder.

Hedgepeth, J. M.↗

Telescoping columns

An extendable column is described which consists of several axially elongated rigid structural sections nested within one another. Each section includes a number of rotatably attached screws running along its length. The next inner section includes threaded lugs oriented to threadingly engage the screws. The column is extended or retracted upon rotation of the screws. The screws of each section are selectively rotated by a motor and an engagement mechanism.

Mazur, J. T.↗

Anchor for Fiberglas Guy Rod

Solution to problem of anchoring fiberglas guy rods to install nut with threads on outer circumference, followed by aluminum sleeve. Sleeve has opening oval at upper and round at bottom end. End of rod is split so fiberglas wedge can be inserted to form V-shaped end. Spread end of rod fits into tapered hole in sleeve and threaded aluminum coupling is put over rod and sleeve.

Wilson, A. H.↗

Tapped-Hole Vent Path

Long helical vent path cools and releases hot pyrotechnical gas that exits along its spiraling threads. Current design uses 1/4-28 threads with outer diameter of stud reduced by 0.025 in. (0.62 mm). To open or close gassampler bottle, pyrotechnic charges on either one side or other of valve cylinder are actuated. Gases vented slowly over long path are cool enough to present no ignition hazard. Vent used to meter flow in refrigeration, pneumaticcontrol, and fluid-control systems by appropriately adjusting size and length of vent path.

Chandler, J. A.↗

Air-Lubricated Lead Screw

Air lubricated lead screw and nut carefully machined to have closely matched closely fitting threads. Compressed air injected into two plenums encircle nut and flow through orifices to lubricate mating threads. Originally developed to position precisely interferometer retroreflector for airborne measurement of solar infrared radiation, device now has positioning accuracy of 0.25 micron.

Perkins, G. S.↗

Tool Releases Optical Elements From Spring Brackets

Threaded hooks retract bracket arms holding element. Tool uses three hooks with threaded shanks mounted in ring-shaped holder to pull on tabs to release optical element. One person can easily insert or remove optical element (such as prism or lens) from spring holder or bracket with minimal risk of damage.

Gum, J. S.↗

Bonded Lockstitch for Insulating Blankets

Improved sewing technique for high-temperature insulating blankets prevents stitch failure in hot, turbulent environments. Standard lockstitch modified to isolate single-stitch failures. Bobbin thread kept at blanket surface. Silicone adhesive applied to all bobbin/needle intersections, so failure at one point will not propagate along thread. Suitable for use in aerodynamic and other applications where there is turbulence.

Rivin, J. M.↗

Lubricating Holes for Corroded Nuts and Bolts

Corroded fasteners taken apart more easily. Lubricating holes bored to thread from three of flats. Holes facilitate application of penetrating oil to help loosen nut when rusted onto bolt. Holes make it possible to apply lubricants and rust removers directly to more of thread than otherwise reachable.

Penn, B. G.↗

Furnace for Tensile Testing of Flexible Ceramics

Ceramic cloth and thread tested quickly at temperatures up to 1,250 degree C. Tensile strengths of ceramic cloths and threads measured conveniently in new furnace at specified temperatures up to 1,250 degree C, using ordinary mechanical tester. Samples heated along part of their lengths in furnace slots. Interchangeable furnace chambers and matching heating elements sized to match size of tested ceramic material.

Smith, M.↗

More Durable Tracks for Heavy Vehicles

Tie bars instead of threaded fasteners make track throwing less likely. Proposed undercarriage for tank or bulldozer has flanged edges to prevent rocks and other road debris from getting caught in track drive and damaging or casting off track. Improved track has no threaded fasteners to be loosened by road shock and vibration. Continuous chain of floating guide bars articulated at web junctions. Pins replace bolted connections. Guide bars and flanges on vehicle keep out stones.

Collins, Earl R., Jr.↗

Cross-linking of two antiparallel vortex tubes

The detailed mechanisms in vortex cross-linking are unveiled by adequately resolved, direct numerical simulation of two viscous vortex tubes. There are three characteristic phases: (1) inviscid induction followed by core flattening and stretching; (2) bridging of the two vortices by accumulation of annihilated and then cross-linked vortex lines; and (3) threading of the remnants of the initial vortex pair in between the two bridges as they pull apart. These phases and the role of threading (along with bridging) in the mixing and the enstrophy cascade are explained, and it is shown that the mechanism is insensitive to asymmetries.

Melander, M. V.↗

Damage-tolerant composite materials produced by stitching carbon fibers

NASA-Langley has undertaken the investigation of composite damage-tolerance enhancement and fabrication economies-maximization via reinforcement-stitching, in combination with resin transfer molding. Attention is given to results obtained by an experimental evaluation of composites tailored for damage tolerance by stitching layers of dry carbon-fiber fabric with closely-spaced threads, in order to furnish through-the-thickness reinforcement. Various stitching patterns and thread materials have been evaluated, using flat-plate specimens; blade-stiffened structural elements have been fabricated and tested. The results presented indicate that stitched laminates furnish damage tolerance performance comparable to that of more expensive, toughened-matrix composites.

Dow, Marvin B.↗