Search NASA⌕ Search

SEARCH · Search NASA

Results for “Threading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Nature-Inspired Hierarchical Steels

Materials can be made strong, but as such they are often brittle and prone to fracture when under stress. Inspired by the exceptionally strong and ductile structure of byssal threads found in certain mussels, we have thus designed and manufactured a multi-hierarchical steel, based on an inexpensive austenitic stainless steel, which defeats this "conflict" by possessing both superior strength and ductility. These excellent mechanical properties are realized by structurally introducing sandwich structures at both the macro- and nano-scales, the latter via an isometric, alternating, dual-phase crystal phases comprising nano-band austenite and nano-lamellar martensite, without change in chemical composition. Our experiments (transmission and scanning electron microscopy, electron back-scattered diffraction, nano-indentation and tensile tests) and micromechanics simulation results reveal a synergy of mechanisms underlying such exceptional properties. This synergy is key to the development of vastly superior mechanical properties, and may provide a unique strategy for the future development of new super strong and tough (damage-tolerant), lightweight and inexpensive structural materials.

36 MATERIALS SCIENCE↗

Developing of nano sized fibrous eutectic silicon in hypereutectic Al–Si alloy by laser remelting

Laser surface melting followed by rapid solidification is an effective means to produce very fine microstructures with desirable surface properties because of the high rates of cooling associated with it. In the present study, the effect of rapid cooling on the silicon particle size, distribution, and morphology of hypereutectic Al–17wt.%Si and Al–20wt.%Si alloys have been investigated. A continuous-wave CO2 laser of wavelength 10.6 μm and a Trumpf Yb-YAG disk laser of wavelength 1.030 μm were used with a beam diameter of 1 mm and scanning speeds ranging from 5 to 100 mm/s. Rapid solidification increased the solubility of silicon in aluminum to approximately 5wt% and induced non-equilibrium hypoeutectic microstructures comprising large volume fractions of primary α-Al dendrites and ultrafine Al–Si eutectic of lamellar morphology. Both α-Al dendrites and the silicon particle sizes were significantly reduced from micron to nanoscale level. The morphology of silicon particles is modified from massive polygonal and plate-like to a mixture of fine fakes with round corners, feathery and fibrous, or a coral-like and thread-like structure. The eutectic silicon size and the interlamellar spacing were reduced to 30 and 10 nm, respectively. Furthermore, most of the silicon crystals in the eutectic region and the aluminum dendrites contained a significant number of twins which were considered as an essential contributor to the mechanism of growth and branching. Microhardness values increased two to threefold due to the refinement of the microstructural constituent.

42 ENGINEERING↗

Injections through skin colonized with Staphylococcus aureus biofilm introduce contamination despite standard antimicrobial preparation procedures

While surgical site preparation has been extensively studied, there is little information about resistance of skin microbiota in the biofilm form to antimicrobial decontamination, and there are no quantitative models to study how biofilm might be transferred into sterile tissue/implant materials during injections for joint spine and tendon, aspiration biopsies and dermal fillers (DF). In this work, we develop two in vitro models to simulate the process of skin preparation and DF injection using pig skin and SimSkin (silicone) materials, respectively. Using the pig skin model, we tested three of the most common skin preparation wipes (alcohol, chlorhexidine and povidone iodine) and found that during wiping they reduced the biofilm bacterial burden of S. aureus (CFU cm-2) by three logs with no statistically significant differences between wipes. Using the SimSkin model, we found that transfer of viable bacteria increased with needle diameter for 30G, 25G and 18G needles. Transfer incidence decreased as injection depth was increased from 1 mm to 3 mm. Serial puncture and linear threading injection styles had similar transfer incidence, whereas fanning significantly increased transfer incidence. The results show that contamination of DF during injection is a risk that can be reduced by modifying skin prep and injection practices.

60 APPLIED LIFE SCIENCES↗

Dislocation-pipe diffusion in nitride superlattices observed in direct atomic resolution

Device failure from diffusion short circuits in microelectronic components occurs via thermally induced migration of atoms along high-diffusivity paths: dislocations, grain boundaries, and free surfaces. Even well-annealed single-grain metallic films contain dislocation densities of about 10 14 m -2 ; hence dislocation-pipe diffusion (DPD) becomes a major contribution at working temperatures. While its theoretical concept was established already in the 1950s and its contribution is commonly measured using indirect tracer, spectroscopy, or electrical methods, no direct observation of DPD at the atomic level has been reported. We present atomically-resolved electron microscopy images of the onset and progression of diffusion along threading dislocations in sequentially annealed nitride metal/semiconductor superlattices, and show that this type of diffusion can be independent of concentration gradients in the system but governed by the reduction of strain fields in the lattice.

42 ENGINEERING↗

Defect reduction by liquid phase epitaxy of germanium on single-crystalline-like germanium templates on flexible, low-cost metal substrates

Single-crystalline-like germanium (Ge) templates were demonstrated on low-cost, flexible metal substrates and have been used to fabricate III–V materials and devices for photovoltaics and flexible electronics applications. However, these Ge templates, fabricated by magnetron sputtering or plasma enhanced chemical vapor deposition, contain a high density of defects. In order to improve the performance of optoelectronic devices made using the Ge templates, a homo-epitaxial Ge layer has been additionally grown by a liquid phase epitaxy (LPE) method. The LPE Ge layer is composed of significantly larger grains (~26 μm) compared to that of the Ge template (~200 nm). This large size of the LPE Ge grains effectively reduces the volume fraction of grain boundaries. The LPE Ge shows an out-of-plane texture Δω of ~0.63° and an in-plane texture ΔΦ of ~1.26°, which signify improvements of ~39.3% and ~76.6% compared to that of the vapor-deposited Ge template, respectively. Further, the LPE Ge is strain free, compared to the strained Ge template hetero-epitaxially grown on cerium oxide. Defects caused by low-angle grain boundaries, impurities and strain relaxation in the Ge template are found to be suppressed in the LPE Ge. The threading dislocation density is roughly estimated to be ~5 × 10 6 cm -2 in the LPE Ge compared to ~1 × 10 10 cm -2 in the Ge template.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions

This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.

36 MATERIALS SCIENCE↗

Interrogating biomineralization one amino acid at a time: amplification of mutational effects in protein-aided titania morphogenesis through reaction-diffusion control

To emulate the control that biomineralizing organisms exert over reactant transport, we construct a countercurrent reaction-diffusion chamber in which an agarose hydrogel regulates the fluxes of inorganic precursor and precipitating solid-binding protein. Furthermore, we show that the morphology of the bioprecipitated titania can be changed from monolithic to interconnected particle networks and dispersed nanoparticles either by decreasing reaction time or by increasing agarose weight percentage at constant precursor and protein concentrations. More strikingly, protein variants with one or two substitutions in their metal oxide-binding domain yield unique peripheral morphologies (needles, threads, plates, and peapods) with distinct crystallography and photocatalytic activity. Our results suggest that diffusional control can magnify otherwise subtle mutational effects in biomineralizing proteins and provide a path for the green synthesis of morphologically and functionally diverse inorganic materials.

59 BASIC BIOLOGICAL SCIENCES↗

Turbulent dynamo action and its effects on the mixing at the convective boundary of an idealized oxygen-burning shell

Convection is one of the most important mixing processes in stellar interiors. Hydrodynamic mass entrainment can bring fresh fuel from neighboring stable layers into a convection zone, modifying the structure and evolution of the star. Because flows in stellar convection zones are highly turbulent, multidimensional hydrodynamic simulations are fundamental to accurately capture the physics of mixing processes. Under some conditions, strong magnetic fields can be sustained by the action of a turbulent dynamo, adding another layer of complexity and possibly altering the dynamics in the convection zone and at its boundaries. In this study, we used our fully compressible S EVEN -L EAGUE H YDRO code to run detailed and highly resolved three-dimensional magnetohydrodynamic simulations of turbulent convection, dynamo amplification, and convective boundary mixing in a simplified setup whose stratification is similar to that of an oxygen-burning shell in a star with an initial mass of 25 M ⊙ . We find that the random stretching of magnetic field lines by fluid motions in the inertial range of the turbulent spectrum (i.e., a small-scale dynamo) naturally amplifies the seed field by several orders of magnitude in a few convective turnover timescales. During the subsequent saturated regime, the magnetic-to-kinetic energy ratio inside the convective shell reaches values as high as 0.33, and the average magnetic field strength is ∼10 10 G. Such strong fields efficiently suppress shear instabilities, which feed the turbulent cascade of kinetic energy, on a wide range of spatial scales. The resulting convective flows are characterized by thread-like structures that extend over a large fraction of the convective shell. The reduced flow speeds and the presence of magnetic fields with strengths up to 60% of the equipartition value at the upper convective boundary diminish the rate of mass entrainment from the stable layer by ≈20% as compared to the purely hydrodynamic case.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatially resolved polarization swings in the supermassive binary black hole candidate OJ 287 with first Event Horizon Telescope observations

We present the first Event Horizon Telescope 1.3 mm observations of the supermassive binary black hole candidate OJ 287. The observations achieved an unprecedented angular resolution of 18 μas and reveal significant structural and polarization variability over just five days, marking the shortest timescale on which such changes have been directly imaged in this source. The inner jet exhibits a twisted ridgeline structure, with features displaying apparent superluminal motions up to about 22 c. The linear polarization maps reveal three main polarized features whose electric-vector position angles (EVPAs) change substantially over the time span of our observations, including a component with a radial polarization consistent with being produced by a recollimation shock. Most notably, we directly resolved two innermost jet components whose EVPAs rotate in opposite directions. The faster component, moving at 2.4 ± 0.9 μas/day (17.4 ± 6.5 c), exhibits counterclockwise EVPA swings of roughly 3.7° per day, while the slower component, with a proper motion of 1.4 ± 0.3 μas/day (10.2 ± 2.2 c), rotates clockwise at approximately 2.5° per day. Previous studies inferred helical magnetic fields in AGN jets from time-resolved or integrated polarization variability but lacked the angular resolution to directly image this effect. Our results provide spatially resolved evidence that a helical magnetic field threads the jet’s collimation and acceleration zone, ruling out models based on the superposition of unresolved components. Our analysis suggests that propagating shocks interact with a Kelvin–Helmholtz plasma instability, illuminating different phases of the helical magnetic field and producing the observed polarization spatial and temporal variability. Moreover, our model naturally accounts for the more rapid polarization rotation observed in the faster moving component. Our model predicts even more rapid swings in polarization, which could be tested with future observations featuring a more densely sampled time coverage.

OJ 287↗

HPC resource integration into CMS Computing via HEPCloud

The higher energy and luminosity from the LHC in Run 2 have put increased pressure on CMS computing resources. Extrapolating to even higher luminosities (and thus higher event complexities and trigger rates) beyond Run 3, it becomes clear that simply scaling up the the current model of CMS computing alone will become economically unfeasible. High Performance Computing (HPC) facilities, widely used in scientific computing outside of HEP, have the potential to help fill the gap. Here we describe the U.S.CMS efforts to integrate US HPC resources into CMS Computing via the HEPCloud project at Fermilab. We present advancements in our ability to use NERSC resources at scale and efforts to integrate other HPC sites as well. We present experience in the elastic use of HPC resources, quickly scaling up use when so required by CMS workflows. We also present performance studies of the CMS multi-threaded framework on both Haswell and KNL HPC resources.

97 MATHEMATICS AND COMPUTING↗

Writing ROOT Data in Parallel with TBufferMerger

Experiments at the Large Hadron Collider (LHC) produce tens of petabytes of new data in ROOT format per year that need to be processed and analysed. In the next decade, following the planned upgrades of the LHC and its detectors, this data production rate is expected to increase at least ten-fold. Therefore, optimizing the ROOT I/O subsystem is of critical importance to the success of the LHC physics programme. This contribution presents ROOT’s approach for writing data from multiple threads to a single output file in an efficient way. Technical aspects of the implementation—the TBufferMerger class—and programming model examples are described. Measurements of runtime performance and the overall improvement relative to the case of serial data writing are also discussed.

47 OTHER INSTRUMENTATION↗

JANA2 Framework for Event Based and Triggerless Data Processing

Development of the second generation JANA2 multi-threaded event processing framework is ongoing through an LDRD initiative grant at Jefferson Lab. The framework is designed to take full advantage of all cores on modern many-core compute nodes. JANA2 efficiently handles both traditional hardware triggered event data and streaming data in online triggerless environments. Development is being done in conjunction with the Electron Ion Collider development. Anticipated to be the next large scale Nuclear Physics facility constructed. The core framework is written in modern C++ but includes an integrated Python interface. The status of development and summary of the more interesting features are presented.

Lawrence, David↗

Concurrent data structures in the ATLAS offline software

In preparation for Run 3 of the LHC, the ATLAS experiment is modifying its offline software to be fully multithreaded. An important part of this is data structures that can be concurrently accessed from many threads both efficiently and safely. A standard way of achieving this is through mutual exclusion; however, the overhead from this can sometimes be excessive. Fully lockless implementations are known for some data structures; however, they are typically complex, and the overhead they require can sometimes be larger than that required for locking implementations. An interesting compromise is to allow lockless access only for reading but not for writing. This often allows the data structures to be much simpler, while still giving good performance for read-mostly access patterns. This proceeding shows some examples of this strategy in data structures used by the ATLAS offline software. It also gives examples of synchronization strategies inspired by read-copy-update, as well as helpers for memorizing values in a multithreaded environment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bringing heterogeneity to the CMS software framework

The advent of computing resources with co-processors, for example Graphics Processing Units (GPU) or Field-Programmable Gate Arrays (FPGA), for use cases like the CMS High-Level Trigger (HLT) or data processing at leadership-class supercomputers imposes challenges for the current data processing frameworks. These challenges include developing a model for algorithms to offload their computations on the co-processors as well as keeping the traditional CPU busy doing other work. The CMS data processing framework, CMSSW, implements multithreading using the Intel Threading Building Blocks (TBB) library, that utilizes tasks as concurrent units of work. In this paper we will discuss a generic mechanism to interact effectively with non-CPU resources that has been implemented in CMSSW. In addition, configuring such a heterogeneous system is challenging. In CMSSW an application is configured with a configuration file written in the Python language. The algorithm types are part of the configuration. The challenge therefore is to unify the CPU and co-processor settings while allowing their implementations to be separate. We will explain how we solved these challenges while minimizing the necessary changes to the CMSSW framework. We will also discuss on a concrete example how algorithms would offload work to NVIDIA GPUs using directly the CUDA API.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multithreading ATLAS offline software: A retrospective

For Run 3, ATLAS redesigned its offline software, Athena, so that the main workflows run completely multithreaded. The resulting substantial reduction in the overall memory requirements allows for better use of machines with many cores. This note will discuss the performance achieved by the multithreaded reconstruction, the process of migrating the large ATLAS code base, and tools and techniques that were useful in debugging threading-related problems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Boosting RDataFrame performance with transparent bulk event processing

RDataFrame is ROOT’s high-level interface for Python and C++ data analysis. Since it first became available, RDataFrame adoption has grown steadily and it is now poised to be a major component of analysis software pipelines for LHC Run 3 and beyond. Thanks to its design inspired by declarative programming principles, RDataFrame enables the development of highperformance, highly parallel analyses without requiring expert knowledge of multi-threading and I/O: user logic is expressed in terms of self-contained, small computation kernels tied together by a high-level API. This design completely decouples analysis logic from its actual execution, and opens several interesting avenues for workflow optimization. In particular, in this work we explore the benefits of moving internal data processing from an event-by-event to a bulkby-bulk loop. This refactoring dramatically reduces the framework’s runtime overheads; in collaboration with the I/O layer it improves data access patterns; it exposes information that optimizing compilers might use to auto-vectorize the invocation of user-defined computations; finally, while existing user-facing interfaces remain unaffected, it becomes possible to additionally offer interfaces that explicitly expose bulks of events, useful e.g. for the injection of GPU kernels into the analysis workflow. In order to inform similar future R&D, design challenges will be presented, as well as an investigation of the relevant timememory trade-off backed by novel performance benchmarks.

Guiraud, Enrico↗

A new portable random number generator wrapper library

Random number generator is an important component of many scientific projects. Many projects are written using programming models (like OpenMP and SYCL) to target different architectures. However, some programming models do not provide a random number generator. In this work, we introduce our random number generator wrapper. It is a header-only library that supports three distributions of random numbers: uniform, normal, and poisson. On the GPU backend, it wraps the cuRAND and rocRAND library, and supports various random number engines. It also wraps random123, a counterbased random number generator, on both CPU and GPU. With this library, we can generate random numbers with a few lines of code and target both GPU and multi-thread CPU with the same code. We also investigate the performance and scalability of this wrapper on different architectures with different engines and the number of cores.

97 MATHEMATICS AND COMPUTING↗

CaTS: Integration of Geant4 and Opticks

CaTS [6]is an advanced example that is part of Geant4 since version 11.0. It demonstrates the use of Opticks to offload the simulation of optical photons to GPUs. Opticks interfaces with the Geant4 toolkit to collect all the necessary information to generate and trace optical photons, re-implements the optical physics processes to be run on the GPU, and automatically translates the Geant4 geometry into a GPU appropriate format. To trace the photons, Opticks uses NVIDIA OptiX®. In this report, we describe CaTS and the integration of Opticks with Geant4. We demonstrate that the generation and tracing of optical photons represents an ideal application to be offloaded to GPUs, fully utilizing the high degree of available parallelism. In a typical liquid argon TPC simulation, a speedup of several hundred times is observed compared to an equivalent simulation using single threaded Geant4.

Wenzel, Hans↗