Search NASA⌕ Search

SEARCH · Search NASA

Results for “accelerator technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Motion of a virtual cathode in a cylindrical channel with electron beam transport in the “compressed” state

This paper studies the motion of a virtual cathode in a two-section drift tube with the formation and breakup of the “compressed” state of an electron beam. Experimental arrangements to intercept part of the injected current during the voltage pulse and to provide virtual cathode motion toward the collector are proposed. The arrangements were implemented on the SINUS-7 high-current electron accelerator. Theoretical and experimental dependences of the virtual cathode velocity on the injected current and cathode voltage are presented. The experimental data on virtual cathode motion agree with its theoretical model based on analytical solutions of equations assisted by computer simulation with the PIC code KARAT. The results of the work demonstrate the feasibility of controlling the virtual cathode motion which can be used in collective ion acceleration and microwave generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GRIPS-Gamma-Ray burst Investigation via Polarimetry and Spectroscopy

The primary scientific goal of the GRIPS mission [1] is to revolutionize our understanding of the early universe using {gamma}-ray bursts. We propose a new generation gamma-ray observatory capable of unprecedented spectroscopy over a wide range of {gamma}-ray energies (200 keV-50 MeV) and of polarimetry (200-1000 keV). Secondary goals achievable by this mission include direct measurements of supernova interiors through {gamma}-rays from radioactive decays, nuclear astrophysics with massive stars and novae, and studies of particle acceleration near compact stars, interstellar shocks, and clusters of galaxies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laser mode effects on the ion acceleration during circularly polarized laser pulse interaction with foil targets

Ion acceleration by circularly polarized laser pulses interacting with foil targets is studied using two dimensional particle-in-cell simulations. It is shown that laser pulses with transverse super-Gaussian profile help in avoiding target deformation as compared with the usual Gaussian pulse. This improves monochromaticity of the accelerated ion spectrum. Two kinds of surface instabilities have been found during the interaction. These instabilities can potentially break the target and destroy the quasimonoenergetic character of the final ion spectrum. Combined laser pulses with super-Hermite and Gaussian modes are used to improve the ion acceleration and transverse collimation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of soliton by nonlinear Landau damping of dust-helical waves

The problem of nonlinear Landau damping of helicon waves in dusty plasma in particular emphasis to the acceleration of soliton is presented here. This in the framework of a collisionless, anisotropic homogeneous dusty plasma in one dimension, can be well described by two coupled dynamical equations of the generalized Zakharov type, with one extra nonlocal term coming from Landau damping. Nonlinear-nonlocal term gives rise to essential contributions relative to the local term. Then under different conditions, kinetic nonlinear Schroedinger equation is constructed and nonlinear decrement is obtained for two cases. It is noticed that the time dependant term in the ponderomotive force plays a significant role for this kind of damping. Additionally, it is shown that nonlinear Landau damping leads to the amplitude modulation of dust helicon waves, further modulational instability, and maximal growth rate is obtained when the group velocity of the helicon wave reaches the dust-acoustic speed. It is demonstrated that how the nonlinear Landau damping leads to the acceleration of soliton, which is eventually slowed down after transferring some of its energy to the wave. Emission of dust-acoustic wave by accelerated soliton is discussed briefly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The mechanisms of electron acceleration in antiparallel and guide field magnetic reconnection

Two-dimensional particle-in-cell simulations are performed to investigate electron dynamics in antiparallel and guide field (in the presence of a strong guide field) magnetic reconnection, and the mechanisms of electron acceleration are compared. In the antiparallel reconnection, the dominant acceleration occurs in the vicinity of the X line, where the magnetic field is weak. Most of these electrons come from the regions just outside of the separatrices, which move into the vicinity of the X line along the magnetic field lines. Electrons can also be nonadiabatically accelerated in the pileup region by the reconnection electric field, where the gyroradii of the electrons are comparable to the curvature radii of the magnetic field lines. Most of these electrons come from the regions inside of the separatrices, which move into the pileup region along the magnetic field lines. In the guide field reconnection, electrons are accelerated by the parallel electric field. They are firstly accelerated when moving toward the X line along the magnetic field lines, and then are further accelerated when they are funneled into the vicinity of the X line. Most of energetic electrons come from the region outside of the pair of the negative separatrices. The efficiency of such an acceleration mechanism is obviously higher than that in the antiparallel reconnection. In both the antiparallel and guide field reconnection, the mechanisms of electron acceleration favor the electrons with higher initial energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The impact of contaminants on laser-driven light ion acceleration

The impact of contaminants on laser-driven ion acceleration is investigated using particle-in-cell simulations. The conventional ion acceleration mechanism, target normal sheath acceleration, has been revisited for targets with proton-rich contaminants in the form of water vapor. The targets considered have a deuterated plastic layer on the rear surface of an aluminum target, and the influence of the contaminant layer on the deuteron acceleration is investigated. In the early stage of ion acceleration, the space-charge electrostatic field on the rear target surface accelerates only the outermost, proton-rich layer of ions, which inhibits the deuteron acceleration by shielding it from the field. When the proton layer is depleted, the deuterons become exposed to the space-charge field and are promptly accelerated. This scenario was tested with a two-dimensional particle-in-cell simulation model by varying the contaminant layer thickness and laser fluence (laser energy per unit area). For laser fluences F{sub laser}<1 J/{mu}m{sup 2}, the contamination layer over the surface inhibits the deuteron acceleration from the rear surface, while in the opposite case of laser fluences F{sub laser}>1 J/{mu}m{sup 2} deuterons and heavier ions can be successfully accelerated with conversion efficiency of laser energy into ions of more than 1%. Experimental data from a 6 {mu}m thick aluminum foil coated with a 1 {mu}m deuterated plastic layer on the back surface are suggestive of the detrimental role of contaminants on deuteron acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron production from ultrashort pulse lasers using linear and circular polarization

An implicit 2D3V particle-in-cell code is used to study proton and deuteron acceleration from an ultrathin CD foil with thickness between 20 and 200 nm using linear and circular polarization. The proton and deuteron beams drive nuclear fusion reactions from converter foils in a pitcher-catcher set-up. The neutron yield for three representative reactions d - d, d - Li, and p - Li has been calculated analytically using the total neutron production cross section and ion stopping power. For linear polarization, maximum normalized neutron yield of Y{sub d-d}=3.4x10{sup 6}, Y{sub d-Li}=3.2x10{sup 7}, and Y{sub p-Li}=6.8x10{sup 6} neutrons/J laser energy has been calculated at the optimum foil thickness of 50 nm. For circular polarization, the optimum foil thickness is 20 nm, for which the corresponding neutron yields are Y{sub d-d}=1.9x10{sup 6}, Y{sub d-Li}=2.0x10{sup 7}, and Y{sub p-Li}=2.7x10{sup 6}, respectively. The laser polarization strongly affects the neutron production; for our regime, i.e., intensity I=1x10{sup 21} W/cm{sup 2}, pulse duration {tau}{sub FWHM}=30 fs, and laser energy {epsilon}{sub laser}=3.8 J, both the conversion efficiency of laser energy into ion kinetic energy and neutron yield are higher for linear polarization. Only for ultrathin ({approx}20 nm) foils in the radiation pressure acceleration regime, circular and linear polarizations yield comparable results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bidimensional Particle-In-Cell simulations for laser-driven proton acceleration using ultra-short, ultra-high contrast laser

In this paper, we report on bi-dimensional Particle-In-Cell simulations performed in order to reproduce the laser-driven proton acceleration obtained when a commercial 200 TW Ti:Sa Laser hits a solid target. The laser-to prepulse contrast was enhanced using plasma mirrors yielding to a main-to-prepulse contrast of ∼10{sup 12}. We varied the pulse duration from 30 fs to 500 fs and the target thickness from 30 nm to several tens of μm. The on-target laser energy was up to 1.8 J leading to an intensity in excess of 10{sup 20 }W cm{sup −2}. A comparison between numerical and existing experimental data [S. Fourmaux et al., Phys. Plasmas 20, 013110 (2013)] is performed, showing a good agreement between experimental results and simulations which confirms that for ultra-thin targets there is an optimum expansion regime. This regime depends on the target thickness and on the laser intensity: if the target is too expanded, the laser travels through the target without being able to deposit its energy within the target. If the target is not sufficiently expanded, the laser energy is reflected by the target. It is important to note that maximum proton energies are reached at longer pulse durations (in the 100 fs regime) than what is currently the best compression pulse length for this type of lasers (typically 20–30 fs). This duration, around 50–100 fs, can be considered a minimum energy transfer time between hot electrons to ions during the considered acceleration process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Standard map in magnetized relativistic systems: Fixed points and regular acceleration

We investigate the concept of a standard map for the interaction of relativistic particles and electrostatic waves of arbitrary amplitudes, under the action of external magnetic fields. The map is adequate for physical settings where waves and particles interact impulsively, and allows for a series of analytical result to be exactly obtained. Unlike the traditional form of the standard map, the present map is nonlinear in the wave amplitude and displays a series of peculiar properties. Among these properties we discuss the relation involving fixed points of the maps and accelerator regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Trajectories of electrons with large longitudinal momenta in the phase plane during surfatron acceleration by an electromagnetic wave

The trajectories of electrons with large longitudinal momenta in the phase plane in the course of their surfatron acceleration by an electromagnetic wave propagating in space plasma across the external magnetic field are analyzed. Electrons with large longitudinal momenta are trapped immediately if the initial wave phase Ψ(0) on the particle trajectory is positive. For negative values of Ψ(0), no electrons trapping by the wave is observed over the available computational times. According to numerical calculations, the trajectories of trapped particles in the phase plane have a singular point of the stable focus type and the behavior of the trajectory corresponds to the motion in a complex nonstationary effective potential well. For some initial phases, electrons are confined in the region of the accelerating electric field for relatively short time, the energy gain being about 50–130% and more.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ponderomotive acceleration of electrons by a laser pulse in magnetized plasma

Electron acceleration by a circularly polarized Gaussian laser pulse in magnetized plasma is investigated in the limit of frozen refractive index. The electron acceleration depends on the ratio of laser frequency to electron cyclotron frequency, amplitude of the laser pulse and plasma density. Near Doppler shifted cyclotron resonance the electron acquires maximum energy. In this scheme, 0.10 MeV electrons can be effectively accelerated to 1-100 MeV using moderate intensity laser pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion velocity and plasma potential measurements of a cylindrical cusped field thruster

Measurements of the most probable time-averaged axial ion velocities and plasma potential within the acceleration channel and in the plume of a straight-channeled cylindrical cusped field thruster operating on xenon are presented. Ion velocities for the thruster are derived from laser-induced fluorescence measurements of the 5d[4]{sub 7/2}-6p[3]{sub 5/2} xenon ion excited state transition centered at {lambda}=834.72nm. Plasma potential measurements are made using a floating emissive probe with a thoriated-tungsten filament. The thruster is operated in a power matched condition with 300 V applied anode potential for comparison to previous krypton plasma potential measurements, and a low power condition with 150 V applied anode potential. Correlations are seen between the plasma potential drop outside of the thruster and kinetic energy contours of the accelerating ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of rapid increase in the plasma density during the ramp-up phase in a radio frequency negative ion source by large-scale particle simulation

Numerical simulations become useful for the developing RF-ICP (Radio Frequency Inductively Coupled Plasma) negative ion sources. We are developing and parallelizing a two-dimensional three velocity electromagnetic Particle-In-Cell code. The result shows rapid increase in the electron density during the density ramp-up phase. A radial electric field due to the space charge is produced with increase in the electron density and the electron transport in the radial direction is suppressed. As a result, electrons stay for a long period in the region where the inductive electric field is strong, and this leads efficient electron acceleration and a rapid increasing of the electron density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of a high-energy tail in ion energy distribution in the cylindrical Hall thruster plasma

A novel method is presented to determine populations and ion energy distribution functions (IEDFs) of individual ion species having different charge states in an ion beam from the measured spectrum of an E × B probe. The inversion of the problem is performed by adopting the iterative Tikhonov regularization method with the characteristic matrices obtained from the calculated ion trajectories. In a cylindrical Hall thruster plasma, an excellent agreement is observed between the IEDFs by an E × B probe and those by a retarding potential analyzer. The existence of a high-energy tail in the IEDF is found to be mainly due to singly charged Xe ions, and is interpreted in terms of non-linear ion acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of beam loading and its compensation in the Compact Ultrafast Terahertz Free-Electron Laser injector linac

The RF properties of an accelerating structure, and the pulse structure and charge per bunch in the electron beam propagating through it are important parameters that determine the impact of beam loading in the structure. The injector linac of the Compact Ultrafast Terahertz Free-Electron Laser (CUTE-FEL) has been operated with two different pulse structures during initial commissioning experiments and the effect of beam loading on the accelerated electron beam parameters has been studied analytically for these two pulse structures. This paper discusses the analytical study of beam loading in a Standing Wave, Plane Wave Transformer linac employed in the CUTE-FEL setup, and a possible technique for its compensation for the electron beam parameters of the CUTE-FEL. A parametric study has been performed to study beam loading for different beam currents and to optimize injection time of the electron beam to compensate beam loading. Results from the parametric study have also been used to explain previously observed results from acceleration experiments in the CUTE-FEL setup.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2-D energy analyzer for low energy electrons

A 2-D electron energy analyzer is designed and constructed to measure the transverse and longitudinal energy distribution of low energy (<1 eV) electrons. The analyzer operates on the principle of adiabatic invariance and motion of low energy electrons in a strong longitudinal magnetic field. The operation of the analyzer is studied in detail and a design to optimize the energy resolution, signal to noise ratio, and physical size is presented. An energy resolution better than 6 meV has been demonstrated. Such an analyzer is a powerful tool to study the process of photoemission which limits the beam quality in modern accelerators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CBETA: The first multi-pass superconducting linear accelerator with energy recovery

Energy recovery has been achieved in a multipass linear accelerator, demonstrating a technology for more compact particle accelerators operating at higher currents and reduced energy consumption. Energy delivered to the beam during the first four passes through the accelerating structure was recovered during four subsequent decelerating passes. High-energy efficiency was achieved by the use of superconducting accelerating cavities and permanent magnets. The fixed-field alternating-gradient optical system used for the return loop successfully transported electron bunches of 42, 78, 114, and 150 MeV in a common vacuum chamber. This new kind of accelerator, an eight-pass energy recovery linac, has the potential to accelerate much higher current than existing linear accelerators while maintaining small beam dimensions and consuming much less energy per electron.

43 PARTICLE ACCELERATORS↗