Search NASA⌕ Search

SEARCH · Search NASA

Results for “data logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Frequency of gamma-ray bursts greater than 3 x 10 to the -6th erg/sq cm

Results are presented for gamma-ray burst observations with the Large Area Sky Survey instrument on HEAO-1. It is noted that during the time HEAO-1 was operational, the instrument detected at least 12 confirmed gamma-ray bursts with intensities greater than 3 microerg/sq cm and identified six additional unconfirmed bursts. The rates of gamma-ray bursts are estimated to be about 125 per yr for intensities greater than 3 microerg/sq cm and approximately 50 per yr for intensities greater than 10 microerg/yr. The data are shown to yield a log N - log S relation for gamma-ray bursts that is consistent with a spherical distribution of sources within the Galaxy and having a broad range of intrinsic luminosities.

Share, G. H.↗

Compositional trends and cooling rates of group IVB iron meteorites

It is found, on the basis of new neutron activation data for group IVB, that log-element - log-Ni trends are best understood in terms of core formation and fractional crytstallizaion. The limited compositional range found in gorup IVB is thought to reflect the fact that, owing to the low concentrations of S, P, and C and the high concentration of Ni, the k sub x (the solid/liquid partition ratio) values are closer to unity than are those in other magmatic groups. Mean volatile abundances in group IVB are significantly lower than those found in any group of chondritic meteorites, indicating that these low abundances are not entirely the result of nebular processes and that planetary outgassing was also involved.

Rasmussen, K. L.↗

Blockchain Application Within a Multi-Sensor Satellite Architecture

With the thrust towards multi-sensor satellite architectures for earth and space exploration, such as constellations and swarms, new technologies are required to enable the transition to this future capability. One of the areas of interest is establishing secure, efficient and prioritized data and command communication pathways among ground and space-based sources for such systems. This paper presents early research results on the potential role, capabilities and value of blockchain usage within constellation and swarm satellite architectures. It demonstrates the use of blockchain's smart contract and distributed ledger capabilities for secure and prioritized multi-sensor satellite collaborative data exchanges, as well as the logging and tracking of command and control events. Adapting and utilizing this emerging technology will aid in addressing technology gaps expected from future constellation flight architectures, such as managing collective computational operations (correlation), dynamic and autonomous observation planning, time-critical events, and provenance tied to ground and space-based autonomous operations and control recordkeeping. In this scenario blockchain is applied in encrypted command transmittal to multiple, yet specific, entities enabling acknowledgement transmittals, performance scalability, and automatic event-based triggering.

Mital, Rohit↗

Structured Covariance Gaussian Networks for Orion Crew Module Aerodynamic Uncertainty Quantification

In this paper we propose a new approach for nonlinear regression and uncertainty quantification. The method is based on a pair of neural networks which parameterize mean and dense covariance functions of a multivariate Gaussian process, trained together to maximize the log-likelihood of observing the given data. The covariance matrix is made positive definite at every input by construction. We also propose a sampling approach that produces viable surrogate function realizations from the Gaussian process. We call the proposed model a Structured Covariance Gaussian Network (SCGN). We illustrate the use of SCGNs for learning an aerodynamic response surface with built-in uncertainty for the Orion crew module. We find that SCGN provides an efficient and systematic way to learn nonlinear functional relationships and dense covariances. We compare results to a baseline Gaussian process regressor and observe that the SCGN provides comparable uncertainty descriptions with improved scalability to dataset size. The sample functions generated by SCGN are fast to evaluate online and are therefore convenient for use in trajectory simulations. These results suggest that SCGN may be a viable computational method for aerodynamic uncertainty quantification.

machine learning↗

Structured Covariance Gaussian Networks for Orion Crew Module Aerodynamic Uncertainty Quantification

In this paper we propose a new approach for nonlinear regression and uncertainty quantification. The method is based on a pair of neural networks which parameterize mean and dense covariance functions of a multivariate Gaussian process, trained together to maximize the log-likelihood of observing the given data. The covariance matrix is made positive definite at every input by construction. We also propose a sampling approach that produces viable surrogate function realizations from the Gaussian process. We call the proposed model a Structured Covariance Gaussian Network (SCGN). We illustrate the use of SCGNs for learning an aerodynamic response surface with built-in uncertainty for the Orion crew module. We find that SCGN provides an efficient and systematic way to learn nonlinear functional relationships and dense covariances. We compare results to a baseline Gaussian process regressor and observe that the SCGN provides comparable uncertainty descriptions with improved scalability to dataset size. The sample functions generated by SCGN are fast to evaluate online and are therefore convenient for use in trajectory simulations. These results suggest that SCGN may be a viable computational method for aerodynamic uncertainty quantification.

machine learning↗

Parallel log structured file system collective buffering to achieve a compact representation of scientific and/or dimensional data

Collective buffering and data pattern solutions are provided for storage, retrieval, and/or analysis of data in a collective parallel processing environment. For example, a method can be provided for data storage in a collective parallel processing environment. The method comprises receiving data to be written for a plurality of collective processes within a collective parallel processing environment, extracting a data pattern for the data to be written for the plurality of collective processes, generating a representation describing the data pattern, and saving the data and the representation.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Metadata compression

A computer-executable method, system, and computer program product for managing a Parallel-Logged File System (PLFS) on a data storage system, wherein the data storage system is in communication with an application that updates the data storage system with checkpoint data, the computer-executable method, system, and computer program product comprising receiving a first checkpoint including data from the application; analyzing the data in the first checkpoint to determine whether a pattern exists in the checkpoint data; and upon a positive determination, adding the pattern into PLFS.

97 MATHEMATICS AND COMPUTING↗

Geothermal Exploration North of Mount St. Helens: Washington State Play-Fairway Project

Active seismicity within a broad zone in proximity to volcanism in the St. Helens Seismic Zone north of Washington State’s Mount Saint Helens provide key ingredients for hydrothermal circulation at depth. This seismicity extends well north of the volcanic edifice below where several faults and associated fractures in outcrop record repeated slip, dilation and alteration indicative of localized fluid flow. Candidate reservoir rocks include marine metasediments overlain by extrusive volcanics. This study characterizes the faults and fractures in the extrusives which are available in outcrop and sampled along well TGH17-24 and Plate Boundary Observatory strainmeter borehole, B201. Outcrop mapping and borehole image log analysis down to 250 m document abundant volcaniclastic deposits and basalt flows that are highly fractured, although intervening ash layers truncate the vertical extent of many of these structures. However, strike slip faults with well-developed gouge zones and adjacent localized high fracture density provide potential for vertically extensive fracture flow paths. Where these rocks are altered by intrusion, they develop high fracture density that can support heat transfer. Borehole image logs further record breakout that indicate the azimuth of SHmax in the shear zone is approximately 054/234°±23.6°, consistent with seismically active strike slip faults in the seismic zone, faults mapped in outcrop and evident in the borehole image logs, and with of plate convergence data. Furthermore, temperature profiles in two wells indicate isothermal conditions at average groundwater temperatures, consistent with rapidly flowing water localized within fractures.

drill↗

Utah FORGE: Observation Well Data

This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s and 1980s.

15 GEOTHERMAL ENERGY↗

A Unique Facility For Metabolic and Thermoregulatory Studies

A unique exercise facility has been developed and used to perform tipper body ergometry tests for space applications. Originally designed to simulate the muscular, cardiovascular and thermoregulatory responses to working in zero gravity, this facility may be used to conduct basic thermoregulatory investigations applicable to multiple sclerosis patients. An environmental chamber houses the tipper body ergometer and permits control of temperature, air now and humidify. The chamber is a closed system and recirculate-s air after conditioning if. A Cybex Lipper body ergometer has been mounted horizontally on the wall of the environmental chamber. In this configuration, the subject lies underneath the arm crank on a supine seat in order to turn the crank. The supine seat can be removed in order to introduce other equipment into the chamber such as a stool to allow upright arm cranking, or a treadmill to allow walk-run experiments. Physiological and environmental signals are fed into a Strawberry Tree data acquisition system while being monitored and logged using the Workbench software program. Physiological monitoring capabilities include 3-lead EKG using an H-P patient monitor, 5 site skin temperature and core temperature using YSI thermistors, and O2 consumption and CO2 production using AMFTFK Applied Electrochemistry analyzers and sensors. This comprehensive data acquisition set tip allows for calculation of various thermoregulatory indices including heat storage, evaporative heat loss, latent heat loss, and metabolic rate. The current system is capable of adding more data acquisition channels if needed. Some potential studies that could be carried out using the facility include: 1) An investigation into the efficiency of cooling various segments of the body to lower Tc 1-2 F. 2) A series of heat and mass balance studies comparing various LCG configurations.

Williamson, Rebecca C.↗

Possible signatures of a cold-flow disk from MUSE using a z ∼ 1 galaxy–quasar pair toward SDSS J1422−0001

We use a background quasar to detect the presence of circumgalactic gas around a z=0.91 low-mass star-forming galaxy. Data from the new Multi Unit Spectroscopic Explorer (MUSE) on the Very Large Telescope show that the galaxy has a dust-corrected star formation rate (SFR) of 4.7 ± 2.0 M{sub ⊙} yr{sup −1}, with no companion down to 0.22 M{sub ⊙} yr{sup −1} (5σ) within 240 h{sup −1} kpc (“30”). Using a high-resolution spectrum of the background quasar, which is fortuitously aligned with the galaxy major axis (with an azimuth angle α of only 15°), we find, in the gas kinematics traced by low-ionization lines, distinct signatures consistent with those expected for a “cold-flow disk” extending at least 12 kpc (3×R{sub 1/2}). We estimate the mass accretion rate M-dot {sub in} to be at least two to three times larger than the SFR, using the geometric constraints from the IFU data and the H i column density of log N{sub HI}/cm{sup −2} ≃ 20.4 obtained from a Hubble Space Telescope/COS near-UV spectrum. From a detailed analysis of the low-ionization lines (e.g., Zn ii, Cr ii, Ti ii, Mn ii, Si ii), the accreting material appears to be enriched to about 0.4 Z{sub ⊙} (albeit with large uncertainties: log Z/Z{sub ⊙}=−0.4 ± 0.4), which is comparable to the galaxy metallicity (12 + log O/H = 8.7 ± 0.2), implying a large recycling fraction from past outflows. Blueshifted Mg ii and Fe ii absorptions in the galaxy spectrum from the MUSE data reveal the presence of an outflow. The Mg ii and Fe ii absorption line ratios indicate emission infilling due to scattering processes, but the MUSE data do not show any signs of fluorescent Fe ii* emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Measured oxygen fugacities of the Angra dos Reis achondrite as a function of temperature

Measurements of the oxygen fugacity, f(O2), as a function of temperature, T, were made on an interior bulk sample of the cumulate achondrite, Angra dos Reis. Data clustered between the f(O2)-T relationship of the iron-wustite assemblage and 1.2 log atm units above iron-wustite. Interpretation of the data indicates that, throughout most of the cooling history of the meteorite, f(O2) values were defined by equilibria involving iron-bearing species at values close to the f(O2) of the assemblage iron-wustite. Measured f(O2) data are compatible with crystallization and cooling at pressures greater than 50 bars.

Brett, R.↗

Curifactory: A research experiment manager

Curifactory is a command line tool and framework for organizing Python experiment code, configuration parameters, and results. It is an opinionated and lightweight approach to workflow management infrastructure and is primarily intended to support researchers conducting experiments on one machine. This software was developed to support the reproducibility of results for several data science projects in the Nuclear Nonproliferation Division at Oak Ridge National Laboratory. Curifactory is intended to be a general framework and is not specific to machine learning or data science. It can aid in any field in which experiments are primarily computation-based studies and can be implemented in Python (e.g., high-energy physics, astronomy, computational chemistry). Here, the design emphasizes the automated caching of intermediate data analysis artifacts to speed up development involving computationally intensive tasks. It also allows for data provenance and experiment reproduction. Individual experiment runs are tracked through logs and their output reports, and entire copies of a run with all cached data and metadata can be exported for others to run using Curifactory on another machine. Curifactory experiments can either be integrated into a project from the beginning or can be written on top of an existing codebase without needing significant modification. A few important views of the Curifactory library can be seen in Figure 1.

97 MATHEMATICS AND COMPUTING↗

An Exceptionally Powerful, Radiatively Driven Ultrafast Outflow in the Rapidly Accreting AGN RE J1034+396

We report the analysis of ∼1 Ms of XMM-Newton observations of the rapidly accreting active galactic nucleus RE J1034+396. The 0.3–9 keV EPIC-pn spectra are well described by a model consisting of steep continuum emission from the corona accompanied by relativistically blurred reflection from a highly ionized accretion disk. The source is known to exhibit strong excess soft X-ray emission, which we show is well represented by thermal disk photons Comptonized by a warm plasma spanning the inner accretion flow. Additionally, the EPIC-pn data provide compelling evidence (ΔC ∼ 60 for four additional parameters) for the presence of an ultrafast outflow (UFO) with a line-of-sight velocity v/c = 0.307$^{+0.001}_{-0.005}$, and an emission signature consistent with reflection of the corona from modestly ionized, outflowing gas. The simultaneous 0.5–2.5 keV RGS spectra show clear absorption lines. Modelling of these data confirms the presence of the UFO and constrains its equivalent hydrogen column density, log N H /(atom cm −2 ) = 21.7$^{+0.1}_{-0.2}$. The RGS data also reveal at least two warm absorber components with a modest outflow velocity (1680$^{+40}_{-50}$ km s -1 ). The measured properties and time evolution of the UFO in RE J1034+396 suggest that it is formed from collisionally ionized plasma, launched from the disk surface and accelerated by radiation pressure. The high terminal velocity and substantial absorbing column density imply that the outflow carries sufficient momentum and energy to transform its environment, being capable of driving out essentially all dust and gas it interacts with along the line of sight, even if the AGN were initially surrounded by a Compton-thick absorber.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistics for ionospherically diffracted VHF/UHF signals.

In this paper, a general characterization of the statistics for an ionospherically diffracted, monochromatic plane wave is presented. The main results are restricted to weak scatter, although two possible extensions that accommodate large phase perturbations and multiple scatter are discussed. A detailed discussion of the first-order statistics of amplitude is given. The general Gaussian distribution is discussed together with its Nakagami-distribution approximation and the log-normal distribution. By using a segment of ATS-3 satellite data recorded at Lima, Peru, we show equally good fits to Gaussian and log-normal distributions at least for the limited dynamic range available. The Nakagami distribution provides only a poor approximation.

Rino, C. L.↗

2000 Knoxville Urban Area Household Travel Behavior Survey

This survey, conducted by NuStats, was a comprehensive study of travel behavior in Knox and Blount counties in the Knoxville urban area. The purpose of the survey was to collect weekday travel characteristics of household members (ages five and older) in the counties during a 24-hour timeframe. The data will be used by the Knoxville Urban Area Metropolitan Planning Organization and local agencies to update transportation and air quality models and to identify transportation needs in the region. The survey was conducted between November 2000 and February 2001. In total, 2,674 households were recruited to participate in the survey. Of these, 1,538 households reported data from a one-day travel log, totaling 12,631 trips by 3,522 persons. Of all trips originating in the study area, three-fourths were made by persons residing in Knox County.

1Hz data↗

Liquid-Rich Shale Potential of Utah’s Uinta and Paradox Basins: Reservoir Characterization and Development Optimization

The enclosed report is the culmination of a multi-year and multi-faceted research project investigating Utah’s unconventional tight oil potential. From the beginning, the project team focused efforts on two different plays: (1) the basal Green River Formation’s (GRF) Uteland Butte unconventional play in the Uinta Basin and (2) the more established but understudied Cane Creek shale play in the Paradox Basin. The 2009-2014 high price of crude oil, coupled with lower natural gas prices, generated renewed interest in exploration and development of liquid hydrocarbon reserves. Following the success of the mid-2000s shale gas boom and employing many of the same well completion techniques, petroleum companies started exploring for liquid petroleum in shale formations. In fact, many shales targeted for natural gas include areas in which the shale is more prone to liquid production. In Utah, organic-rich shales in the Uinta and Paradox Basins have been the source of significant hydrocarbon generation, with companies traditionally targeting the interbedded sands or carbonates for their conventional resource recovery. Because of the advances in horizontal drilling and hydraulic fracturing techniques, operators in these basins started to explore the petroleum production potential of the shale units themselves. The GRF in the Uinta Basin has been studied for over 50 years, since the first hydrocarbon discoveries. However, those studies focused on the many conventional sandstone reservoirs currently producing oil and gas. In contrast, less information was available about the more unconventional crude oil production potential of thinner carbonate/shale units, most notably the basal Uteland Butte member. The Cane Creek shale of the Paradox Basin has been a target for exploration periodically since the 1960s and produces oil from several small fields. The play generated much interest in the early 1990s with the successful use of horizontal drilling. Recently, the USGS assessed the undiscovered oil resource in the Cane Creek shale of the Paradox Basin at 103 million barrels at a 95 percent confidence level and 198 million barrels at a 50 percent confidence level. Nonetheless, limited research was available or published to further define the play and the reservoir characteristics. The specific objectives of the enclosed research were to (1) characterize geologic, geochemical, and geomechanical rock properties of target zones in the two designated basins by compiling data and by analyzing available cores, cuttings, and well logs; (2) describe outcrop reservoir analogs of GRF plays (Cane Creek shale is not exposed) and compare them to subsurface data; (3) map major regional trends for targeted intervals and identify “sweet spots” that have the greatest oil potential; (4) reduce exploration costs and drilling risks, especially in environmentally sensitive areas; (5) improve drilling and fracturing effectiveness by determining optimal well completion design; and (6) reduce field development costs, maximize oil recovery, and increase reserves. These objectives are all addressed in a series of nine publications that resulted from this extensive research project. Each publication is included in this report as an independent appendix.

02 PETROLEUM↗

Mesoscale variability of free tropospheric humidity near San Nicolas Island during FIRE

Humidity variability at the top of the marine boundary layer (MBL) and in the free troposphere was examined using a variety of measurements taken on and around San Nicolas Island (SNI) during the FIRE IFO in July, 1987. Doppler wind profiler reflectivity recorded at two minute time resolution has provided the most continuous record and detail of small scale humidity fluctuations. Rawinsonde data were available from both an island site and the research vessel Point Sur. The information extractable from these sources is somewhat limited due to the frequency of launches (3 to 4/day at SNI and 6/day on the Point Sur). Some additional data were available from instrumented aircraft although scheduling flights in the neighborhood of the island was difficult due to restrictions on the air space. Other relevant data were collected at SNI near the radar and rawinsonde launch sites. A continuous record of cloud base altitude was logged by a ceilometer. Doppler acoustic sounder (sodar) reflectivity data provided a good record of inversion height. The sodar also monitored turbulent temperature fluctuations in the MBL. A small ground station recorded hourly averages of solar irradiance and downward longwave irradiance. The analysis in progress of the various data sets for two adjacent two day periods from 11 July to 14 July is described. The earlier period was chosen because the marine inversion was unusually high and there was increased frequency of rawinsonde launches at SNI. The later period was chosen because of the significant descent with time of an elevated inversion indicated by the radar data. Throughout the four day period, but especially in the first half, the turbulent humidity structure calculated from Doppler radar reflectivity shows excellent agreement with humidity profiles evaluated from rawinsonde data.

White, A. B.↗