Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffractive networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Local structure of temperature and pH-sensitive colloidal microgels

The temperature dependence of the local intra-particle structure of colloidal microgel particles, composed of interpenetrated polymer networks, has been investigated by small-angle neutron scattering at different pH and concentrations, in the range (299÷315) K, where a volume phase transition from a swollen to a shrunken state takes place. Data are well described by a theoretical model that takes into account the presence of both interpenetrated polymer networks and cross-linkers. Two different behaviors are found across the volume phase transition. At neutral pH and T ≈ 307 K, a sharp change of the local structure from a water rich open inhomogeneous interpenetrated polymer network to a homogeneous porous solid-like structure after expelling water is observed. Differently, at acidic pH, the local structure changes almost continuously. These findings demonstrate that a fine control of the pH of the system allows to tune the sharpness of the volume-phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic antiferromagnetic order in the spin-orbit coupled trigonal-lattice Ca 2 Sr 2 IrO 6

Here, we used single-crystal x-ray and neutron diffraction to investigate the crystal and magnetic structures of trigonal lattice iridate Ca 2 Sr 2 IrO 6 . The crystal structure is determined to be R ¯3 with two distinct Ir sites. The system exhibits long-range antiferromagnetic order below T N = 13.1 K. The magnetic wave vector is identified as (0,0.5,1) with ferromagnetic coupling along the a axis and antiferromagnetic correlation along the b axis. Spins align dominantly within the basal plane along the [1,2,0] direction and tilt 34° toward the c axis. The ordered moment is 0.66(3) μ B /Ir, larger than other iridates where iridium ions form corner- or edge-sharing IrO 6 octahedral networks. The tilting angle is reduced to ≈19° when a magnetic field of 4.9 T is applied along the c axis. Density functional theory calculations confirm that the experimentally determined magnetic configuration is the most probable ground state with an insulating gap ~0.5 eV.

36 MATERIALS SCIENCE↗

Transformation of c-oriented nanowall network to a flat morphology in GaN films on c-plane sapphire

Highlights: {yields} High quality wurtzite structures GaN nanowall network formed on c-plane sapphire. {yields} Tapering of nanowalls at the apex cause electron confinement effects. {yields} Temperature dependent transformation of the six fold nanowall network to a flat morphology. {yields} Growth kinetics is influenced by adatom diffusion, interactions and bonding for GaN layer. -- Abstract: The work significantly optimizes growth parameters for nanostructured and flat GaN film in the 480-830 {sup o}C temperature range. The growth of ordered, high quality GaN nanowall hexagonal honeycomb like network on c-plane sapphire under nitrogen rich (N/Ga ratio of 100) conditions at temperatures below 700 {sup o}C is demonstrated. The walls are c-oriented wurtzite structures 200 nm wide at base and taper to 10 nm at apex, manifesting electron confinement effects to tune optoelectronic properties. For substrate temperatures above 700 {sup o}C the nanowalls thicken to a flat morphology with a dislocation density of 10{sup 10}/cm{sup 2}. The role of misfit dislocations in the GaN overlayer evolution is discussed in terms of growth kinetics being influenced by adatom diffusion, interactions and bonding at different temperatures. The GaN films are characterized by reflection high energy electron diffraction (RHEED), field emission scanning electron (FESEM), high resolution X-ray diffraction (HRXRD) and cathodoluminescence (CL).

36 MATERIALS SCIENCE↗

The application of spaceborne GPS to atmospheric limb sounding and global change monitoring

This monograph is intended for readers with minimal background in radio science who seek a relatively comprehensive treatment of the mission and technical aspects of an Earth-orbiting radio occultation satellite. Part 1 (chapters 1-6) describes mission concepts and programmatic information; Part 2 (chapters 7-12) deals with the theoretical aspects of analyzing and interpreting radio occultation measurements. In this mission concept the navigation signals from a Global Positioning System (GPS) satellite that is being occulted by the Earth's limb are observed by a GPS flight receiver on board a low Earth orbiter (LEO) satellite. This technique can be used to recover profiles of the Earth's atmospheric refractivity, pressure, and temperature using small, dedicated, and relatively low-cost space systems. Chapter 2 summarizes the basic space system concepts of the limb-sounding technique and describes a low-cost strawman demonstration mission. Chapter 3 discusses some of the scientific benefits of using radio occultation on a suite of small satellites. Chapter 4 provides a more detailed discussion of several system elements in a radio occultation mission, including the launch system for small payloads, the LEO microsat, the GPS constellation, the GPS flight receiver payload, the mission operations ground control and data receiving system, the ground-based GPS global tracking network for precision orbit determination, and the central data processing and archive system. Chapter 5 addresses the various technology readiness questions that invariably arise. Chapter 6 discusses the overall costs of a demonstration mission such as GPS/MET (meteorological) proposed by the University Navstar Consortium (UNAVCO). Chapter 7 describes a geometrical optics approach to coplanar atmospheric occultation. Chapter 8 addresses major questions regarding accuracy of the occultation techniques. Chapter 9 describes some simulations that have been performed to evaluate the sensitivity of the recovered profiles of atmospheric parameters to different error sources, such as departure from spherical symmetry, water vapor, etc. Chapter 10 discusses horizontal and vertical resolution associated with limb sounders in general. Chapter 11 treats selected Fresnel diffraction techniques that can be used in radio occultation measurements to sharpen resolution. Chapter 12 provides brief discussions on selected special topics, such as strategies for handling interference and multipath processes that may arise for rays traveling in the lower troposphere.

Melbourne, W. G.↗

Synthesis, crystal structure and magnetic characterization of metal(II) coordination polymers based on 2-carboxyethylphosphonic acid and 1,10-phenanthroline (metal=Cu, Co, Cd)

Three non-isostructural metal(II) coordination polymers (metal=copper, cobalt, cadmium) were synthesized under the same mild hydrothermal conditions (T=408 K) by mixture of the corresponding metal acetate with 2-carboxyethylphosphonic acid and 1,10-phenanthroline (1:1:1 M ratio) and their structures were determined by single-crystal X-ray diffraction. Cu{sub 2}(HO{sub 3}PCH{sub 2}CH{sub 2}COO){sub 2}(C{sub 12}H{sub 8}N{sub 2}){sub 2}(H{sub 2}O){sub 2} and Cd{sub 2}(HO{sub 3}PCH{sub 2}CH{sub 2}COO){sub 2}(C{sub 12}H{sub 8}N{sub 2}){sub 2} are triclinic (space group P-1) with a=7.908(5) A, b=10.373(5) A, c=11.515(5) A, {alpha}=111.683(5) Degree-Sign , {beta}=95.801(5) Degree-Sign , {gamma}=110.212(5) Degree-Sign (T=120 K), and a=8.162(5) A, b=9.500(5) A, c=11.148(5) A, {alpha}=102.623(5) Degree-Sign , {beta}=98.607(5) Degree-Sign , {gamma}=113.004(5) Degree-Sign (T=293 K), respectively. In contrast, [Co{sub 2}(HO{sub 3}PCH{sub 2}CH{sub 2}COO){sub 2}(C{sub 12}H{sub 8}N{sub 2}){sub 2}({mu}-OH{sub 2})](H{sub 2}O) is orthorhombic (space group Pbcn) with a=21.1057(2) A, b=9.8231(1) A, c=15.4251(1) A (T=120 K). For these three compounds, structural features, including H-bond network and the {pi}-{pi} stacking interactions, and thermal stability are reported and discussed. None of the materials present a long-range magnetic order in the range of temperatures investigated from 300 K down to 1.8 K. - Graphical abstract: In same synthetic conditions, both the chemical and structural features of three transition metal(II) coordination polymers based on 2-carboxyethylphosphonate and 1-10 Prime -phenanthroline are influenced by the metal cation characteristics, leading to non-homologous materials with different properties, which show the high chemical versatility of this interesting system. Highlights: Black-Right-Pointing-Pointer Non-isostructural metal coordination polymers were synthesized under mild hydrothermal conditions. Black-Right-Pointing-Pointer Ligand's flexibility provides the opportunity to design compounds with tailored properties. Black-Right-Pointing-Pointer Structural changes in the secondary building units are induced by metal features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen bond network and bond valence analysis on uranyl sulfate compounds with organic-based interstitial cations

Seven new uranyl sulfate compounds with organic charge-balancing cations have been synthesized and structurally characterized. The structural unit topologies of the two chains and five sheets have been previously reported in uranyl sulfate crystal chemistry, although they were synthesized using different organic molecules. With the inclusion of six of these structures to the 48 previously published uranyl sulfate compounds, a total of 54 known uranyl sulfate compounds with organic charge-balancing cations were compiled and analyzed. A graphical approach was used to compare the structural unit topologies, and a bond valence approach was used to quantify the hydrogen bond networks that exist between the interstitial cationic and solvent species to the uranyl sulfate anionic structural units. Finally, this analysis helped elucidate which oxygen atoms in the structural unit receive hydrogen bonds and how the organic cations stabilize the overall crystal structures in this subclass of U(VI) materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Control System Software for SANS BATAN Spectrometer in Serpong, Indonesia

The original main control system of the 36 meter small-angle neutron scattering (SANS) BATAN Spectrometer (SMARTer) has been replaced with the new ones due to the malfunction of the main computer. For that reason, a new control system software for handling all the control systems was also developed in order to put the spectrometer back in operation. The developed software is able to control the system such as rotation movement of six pinholes system, vertical movement of four neutron guide system with the total length of 16.5 m, two-directional movement of a neutron beam stopper, forward-backward movement of a 2D position sensitive detector (2D-PSD) along 16.7 m, etc. A Visual Basic language program running on Windows operating system was employed to develop the software and it can be operated by other remote computers in the local area network. All device positions and command menu are displayed graphically in the main monitor or window and each device control can be executed by clicking the control button. Those advantages are necessary required for developing a new user-friendly control system software. Finally, the new software has been tested for handling a complete SANS experiment and it works properly.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural and thermodynamic evolution of an amorphous SiOC ceramic after swift heavy ion irradiation

Radiation induced structural and energetic changes have been widely studied in crystalline materials, but studied to a much lesser extent in amorphous solids. Using a combination of neutron pair distribution function (PDF) analysis and high temperature oxide melt solution calorimetry, we obtained critical insights into the structural and energetic evolution in a swift heavy ion irradiated amorphous SiOC polymer-derived ceramic. The radiation modified SiOC structure becomes energetically less stable by 24.0±1.6 kJ/mol compared to the unirradiated structure. This destabilization is related to decreased connectivity of the Si-O-C network and destruction of free carbon. In comparison with unirradiated SiOC, the irradiated structure is more likely to become phase separated during subsequent thermal annealing. Here, our study has important implications for evaluating amorphous SiOC ceramic as a possible radiation resistant structure for nuclear applications.

36 MATERIALS SCIENCE↗

Tuning the Solvation Structure in Aqueous Zinc Batteries to Maximize Zn-Ion Intercalation and Optimize Dendrite-Free Zinc Plating

Aqueous zinc batteries are recognized to suffer from H + /Zn 2+ coinsertion in the cathode, but few approaches have been reported to suppress deleterious H + intercalation. We realize this goal by tuning the solvation structure, using LiV 2 (PO 4 ) 3 (LVP) as a model cathode. Phase conversion of LVP induced by H + intercalation is observed in 4 m Zn(OTf) 2 , whereas dominant Zn 2+ insertion is confirmed in a ZnCl 2 water-in-salt electrolyte (WiSE). This disparity is ascribed to the complete absence of free water and a strong Zn 2+ –H 2 O interaction in the latter that interrupts the H 2 O hydrogen bonding network, thus suppressing H + intercalation. On the basis of this strategy, a novel PEG-based hybrid electrolyte is designed to replace the corrosive ZnCl2 WiSE. This system exhibits an optimized Zn 2+ solvation sheath with a similar low free water content, showing not only much better suppression of H + intercalation but also highly reversible Zn plating/stripping with a CE of ~99.7% over 150 cycles.

25 ENERGY STORAGE↗

Polyclusters and Substitution Effects in the Na–Au–Ga System: Remarkable Sodium Bonding Characteristics in Polar Intermetallics

A systematic exploration of Na- and Au-poor parts of the Na–Au–Ga system (less than 15 at. % Na or Au) uncovered several compounds with novel structural features that are unusual for the rest of the system. Four ternary compounds Na1.00(3)Au0.18Ga1.82(1) (I), NaAu2Ga4 (II), Na5Au10Ga16 (III), and NaAu4Ga2 (IV) have been synthesized and structurally characterized by single crystal X-ray diffraction: Na1.00(3)Au0.18Ga1.82(1)(I, P6/mmm, a = 15.181(2), c =9.129(2)Å, Z = 30); NaAu2Ga4 (II, Pnma, a = 16.733(3), b = 4.3330(9), c =7.358(3) Å, Z = 4); Na5Au10Ga16 (III, P63/m, a = 10.754(2), c =11.457(2) Å, Z = 2); and NaAu4Ga2 (IV, P21/c, a = 8.292(2), b = 7.361(1), c =9.220(2)Å, β = 116.15(3), Z = 4). Compound I lies between the large family of Bergman-related compounds and Na-poor Zintl-type compounds and exhibits a clathrate-like structure containing icosahedral clusters similar to those in cubic 1/1 approximants, as well as tunnels with highly disordered cation positions and fused Na-centered clusters. Structures II, III, and IV are built of polyanionic networks and clusters that generate novel tunnels in each that contain isolated, ordered Na atoms. Tight-binding electronic structure calculations using linear muffin-tin-orbital (LMTO) methods on II, III, IV and an idealized model of I show that all are metallic with evident pseudogaps at the Fermi levels. The integrated crystal orbital Hamilton populations for II–IV are typically dominated by Au–Ga, Ga–Ga, and Au–Au bonding, although Na–Au and Na–Ga contributions are also significant. Sodium’s involvement into such covalency is consistent with that recently reported in Na–Au–M (M = Ga, Ge, Sn, Zn, and Cd) phases.

36 MATERIALS SCIENCE↗

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗

JBlulce Data Acquisition Software for Macromolecular Crystallography

JBlulce (Java Beam Line Universal Integrated Configuration Environment is a data acquisition software for macromolecular crystallography conforming user interface of the SSRL Blulce that has become a de-factor standard in the field. Besides this interface conformity, JBlulce is a unique system in terms of architecture, spec, capability and software implementation. It features only two software layers, the JBlulce clients and the EPICS servers, as compared to three layers present in Blulce and most of similar systems. This layers reduction provides a faster communication with hardware and an easier access to advanced hardware capabilities like on-the-fly scanning. Then JBlulce clients are designed to operate in parallel with the other beamline controls which streamlines the tasks performed by staff such as beamline preparation, maintenance, auditing and user assistance. Another distinction is the deployment of multiple plugins that can be written in any programming language thus involving more staff into the development. further on, JBlulce makes use of unified motion controls allowing for easy scanning and optimizing of any beamline component. Finally, the graphic interface is implemented in Java making full use of rich Java libraries and Jave IDE for debugging. to compare, Blulce user interface is implemented with aging Tcl/tk language providing very restricted capabilities. JBlulce makes full use of the industrial power and wide drivers selection of EPICS in controlling hardware; all hardware communication is routed via multiple EPICS servers residing on local area network. JBlulce also includes several EPICS State Notation servers aimed at making hardware communication more robust. Besides using EPICS for controlling hardware, JBlulce extensively uses EPICS databases for efficient communications between multiple instances of JBlulce clients and JBlulce plugins that can run in parallel on different computers. All of the above makes JBlulce one of the biggest and most sophisticated EPICS client projects to date. JBlulce configuration is stored in my SQL database which provides flexibility in tuning the system. The database is also accessible by the plugins. From the users perspective JBlulce provides all standard features of data acquisition software for macromolecular crystallography plus such unique capabilities as one click beamline energy change that may involve switching undulator harmonics, mirrors lanes and beam realignment, automated diffraction rtastering for finding small crystals and sweet spots on poorly diffracting crystals with automated scoring of raster cells by the number of reflections; data collection along a vector; automated on-the-fly fluorescent tastering, a faster and lower-irradiation compliment to the diffraction raster; fully automated fluorescence measurements for MAD that include signal optimization, fast on the fly energy scanning and automated adapting of scan range to chemical shifts; fly-scan minibeam realignment; automated loop and crystal centering, controls for sample automounter, automated screening, data collection auditing, remote access and a lot more.

Stepanov, Sergey↗

Synthesis, structure and chemical bonding of CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x=0, 1.32, and 2) and SrCo{sub 2}Si{sub 2}

The finding of superconductivity in Ba{sub 0.6}K{sub 0.4}Fe{sub 2}As{sub 2} put the attention on the investigation of compounds that crystallize with ThCr{sub 2}Si{sub 2} structure type such as AT{sub 2}X{sub 2} (A=alkali/alkaline earth/rare earth element; T=transition metal and X=element of the 13–15th group). In this context the silicides CaFe{sub 2}Si{sub 2}, CaFe{sub 0.68(6)}Rh{sub 1.32(6)}Si{sub 2}, CaRh{sub 2}Si{sub 2} and SrCo{sub 2}Si{sub 2} have been synthesized by reaction of the elements under an argon atmosphere. Single crystals were obtained by special heat treatment in welded niobium/tantalum ampoules. The compounds were investigated by means of powder and single crystal X-ray diffraction. All compounds crystallize in the ThCr{sub 2}Si{sub 2}-type structure with space group I4/mmm (No. 139): a=3.939(1) Å, c=10.185(1) Å, R{sub 1}=0.045, 85 F{sup 2} values, 8 variable parameters for CaFe{sub 2}Si{sub 2}; a=4.0590(2) Å, c=9.9390(8) Å, R{sub 1}=0.030, 90 F{sup 2} values, 10 variable parameters for CaFe{sub 0.68(6)}Rh{sub 1.32(6)}Si{sub 2}; a=4.0695(1) Å, c=9.9841(3) Å, R{sub 1}=0.031, 114 F{sup 2} values, 9 variable parameters for CaRh{sub 2}Si{sub 2}; and a=3.974(1) Å, c=10.395(1) Å, R{sub 1}=0.036, 95 F{sup 2} values, 8 variable parameters for SrCo{sub 2}Si{sub 2}. The structure of SrCo{sub 2}Si{sub 2} contains isolated [Co{sub 2}Si{sub 2}]{sup 2−} 2D-layers in the ab-plane whereas in CaFe{sub 2−x}Rh{sub x}Si{sub 2} the [T{sub 2}Si{sub 2}] layers (T=Fe and Rh) are interconnected along the c-axis via Si3Si bonds resulting in a three-dimentional (3D) [T{sub 2}Si{sub 2}]{sup 2−} polyanions and therefore belong to the so-called collapsed form of the ThCr{sub 2}Si{sub 2}-type structure. The SrCo{sub 2}Si{sub 2} and CaRh{sub 2}Si{sub 2} are isoelectronic to the parent 122 iron–pnictide superconductors AeFe{sub 2}As{sub 2} (Ae=alkaline earth elements), whereas CaFe{sub 2}Si{sub 2} is a full substituted variant (As/Si) of CaFe{sub 2}As{sub 2}. The crystal chemistry and chemical bonding in the title compounds are discussed in terms of LMTO band structure calculations and a topological analysis using the Electron Localization Function (ELF). - Graphical abstract: The SrCo{sub 2}Si{sub 2} and CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x==0, 1.32, and 2) crystallize in the ThCr{sub 2}Si{sub 2}-type. The structure of SrCo{sub 2}Si{sub 2} contains isolated [Co{sub 2}Si{sub 2}]{sup 2−} layers in the ab-plane, whereas the [T{sub 2}Si{sub 2}] layers in CaFe{sub 2−x}Rh{sub x}Si{sub 2} are interconnected along the c-axis via Si3Si bonds resulting in a [T{sub 2}Si{sub 2}]{sup 2−} network. - Highlights: • Synthesis and structure of ternary silicides SrCo{sub 2}Si{sub 2} and CaFe{sub 2−x}Rh{sub x}Si{sub 2} (x=0, 1.32, and 2). • The SrCo{sub 2}Si{sub 2} and CaRh{sub 2}Si{sub 2} are isoelectronic to the parent 122 iron–pnictide superconductors AeFe{sub 2}As{sub 2}. • CaFe{sub 2}Si{sub 2} is a full substituted variant (As/Si) of superconductor CaFe{sub 2}As{sub 2}. • The title compounds demonstrate the tunable Si3Si distances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced technology for a satellite multichannel demultiplexer/demodulator

Satellite on-board processing is needed to efficiently service multiple users while at the same time minimizing earth station complexity. The processing satellite receives a wideband uplink at 30 GHz and down-converts it to a suitable intermediate frequency. A multichannel demultiplexer then separates the composite signal into discrete channels. Each channel is then demodulated by bulk demodulators, with the baseband signals routed to the downlink processor for retransmission to the receiving earth stations. This type of processing circumvents many of the difficulties associated with traditional bent-pipe repeater satellites. Uplink signal distortion and interference are not retransmitted on the downlink. Downlink power can be allocated in accordance with user needs, independent of uplink transmissions. This allows the uplink users to employ different data rates as well as different modulation and coding schemes. In addition, all downlink users have a common frequency standard and symbol clock on the satellite, which is useful for network synchronization in time division multiple access schemes. The purpose of this program is to demonstrate the concept of an optically implemented multichannel demultiplexer (MCD). A proof-of-concept (POC) model has been developed which has the ability to receive a 40 MHz wide composite signal consisting of up to 1000 40 kHz QPSK modulated channels and perform the demultiplexing process. In addition a set of special test equipment (STE) has been configured to evaluate the performance of the POC model. The optical MCD is realized as an acousto-optic spectrum analyzer utilizing the capability of Bragg cells to perform the required channelization. These Bragg cells receive an optical input from a laser source and an RF input (the signal). The Bragg interaction causes optical output diffractions at angles proportional to the RF input frequency. These discrete diffractions are optically detected and output to individual demodulators for baseband conversion. Optimization of the MCD design was conducted in order to achieve a compromise between two opposing sources of signal degradation: adjacent channel interference and intersymbol interference. The system was also optimized to allow simple, inexpensive ground stations communications with the MCD. These design goals led to the realization of a POC MCD which demonstrates the demultiplexing function with minimal signal degradation. Performance evaluation results using the STE equipment indicate that the dynamic range of the demultiplexer in the presence of adjacent and multiple channel loading is 40 - 50 dB. Measured bit error rate (BER) probabilities varied from the predicted theoretical results by one dB or less. The performance of the proof-of-concept model indicate that the development of a space qualified optically implemented MCD are feasible. The advantages to such an implementation include reduced size, weight and power and increased reliability when compared with electronic approaches. All of these factors are critical to on-board satellite processors. Further optimization can be conducted which trade ground station complexity and MCD performance to achieve desired system results.

Abramovitz, Irwin J.↗

Distribution and mobility of lithium in NASICON-type Li1-xTi2-xNbx(PO4)3 (0 ≤ x ≤ 0.5) compounds

Highlights: • Li{sub 1-x}Ti{sub 2-x}Nb{sub x}(PO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) were prepared via solid-state reaction. • The substitution of Ti{sup 4+} by Nb{sup 5+} in LiTi{sub 2}(PO{sub 4}){sub 3} increases unit cell dimensions. • The Rietveld analysis of XRD patterns was performed to deduce location of Li ions. • LiTi{sub 2}(PO{sub 4}){sub 3} have the highest total conductivity and low activation energy. - Abstract: The NASICON-type Li{sub 1-x}Ti{sub 2-x}Nb{sub x}(PO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) has been prepared using a conventional solid-state reaction and characterized by powder X-ray (XRD), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and impedance spectroscopy (IS). The substitution of Ti{sup 4+} by Nb{sup 5+} in LiTi{sub 2}(PO{sub 4}){sub 3} increases unit cell parameters of NASICON phases (S.G. R 3-bar c). The parallel XRD and NMR analysis confirmed the formation of secondary phases besides NASICON compounds. The NMR components detected in {sup 93}Nb and {sup 31}P MAS-NMR spectra have been ascribed to formation of crystalline NbPO{sub 5} and NASICON phases. The substitution of Ti{sup 4+} by Nb{sup 5+} produces detection of three equally spaced {sup 31}P MAS-NMR P(OTi){sub 4-n}(ONb){sub n} components, whose intensity changes with the Nb content of the NASICON phase. On the other hand, the broad {sup 31}P NMR band detected at ∼−130 ppm has been ascribed to the formation of an amorphous Nb phosphate that strongly affects conductivity of samples. At 355 K, total conductivity decreased from 1.2 × 10{sup −7} S cm{sup −1} (Ea = 0.49 eV) to 6.0 × 10{sup −9} S cm{sup −1} (Ea = 0.56 eV) when going from LiTi{sub 2}(PO{sub 4}){sub 3} to Li{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}(PO{sub 4}){sub 3}. This important decrease has been related to the increment of activation energy (stronger Li-network interaction); however, further studies are required to understand the deleterious effect of niobium in Li{sub 1-x}Ti{sub 2-x}Nb{sub x} (PO{sub 4}){sub 3} series.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-standing elastomeric composites based on lithium ferrites and their dielectric behavior

Lithium ferrite (LiFe{sub 5}O{sub 8}) is an attractive material for technological applications due to its physical properties, which are significantly dependent on the preparation method and raw materials. In this work, LiFe{sub 5}O{sub 8} crystallites were obtained by controlled heat-treatment process at 1100 °C, of a homogeneous mixture of Li{sub 2}O-Fe{sub 2}O{sub 3} powders, prepared by wet ball-milling and using lithium and iron nitrates as raw materials. The main goal was the preparation of a flexible and self-standing tick composite film by embedding lithium ferrite particles in a polymeric matrix, taking advantage of the good mechanical properties of the polymer and of the electrical and dielectric properties of the ferrite. The selected polymer matrix was styrene-b-isoprene-b-styrene copolymer. To prepare the composites, the lithium ferrite particles were chemically modified in order to functionalize their surface. To analyse the influence of the particles surface modification, different composites were made, with modified and unmodified particles. The structure of the obtained composites was studied by FTIR, XRD, TGA, and DSC techniques. The dielectric properties were analysed, in the frequency range between 10 Hz and 1 MHz and in function of temperature in the range between −73 °C and 127 °C. These properties were related with the structure and concentration of the particles in the matrix network. The composites with the modified particles present higher dielectric constant, maintaining values of loss tangent sufficiently low (<10{sup −2}) that can be considered interesting for technological applications.

36 MATERIALS SCIENCE↗

Boundary characterization using 3D mapping of geometrically necessary dislocations in AM Ta microstructure

Additive manufacturing (AM) of high strength metallic materials produces microstructures and defects that deviate substantially from those created through conventional manufacturing methods. It has recently been demonstrated that with application of extreme energy densities, a high-temperature refractory metal, tantalum (Ta), can be printed to a fully dense state with exceptionally low porosity. Here we employ a combination of three-dimensional electron backscattered diffraction (EBSD) TriBeam technology and crystallographic geometrically necessary dislocation (GND) theory to characterize the microstructure and defect boundaries of this unusual AM product. Two-dimensional (2D) EBSD and these three-dimensional (3D) measurements indicate that the microstructure of AM Ta is highly oriented <111> along the build direction, yet at the same time contains large crystallographic orientation gradients that span mm’s across the build. Crystallographic GND density analysis of the 3D microstructure reveals that highly misoriented subboundaries exist within this strongly textured microstructure that have large dislocation densities of 1×10 16 m –2 , just as large as those comprising the high-angle grain boundaries (HAGBs) in the same material. The 3D crystallographic GND density mapping reveals these subboundaries are part of a complex, finely spaced network that extends throughout the entire microstructure. Here, the orientation of these boundaries can be related to the scan strategy used during printing. TEM measurements corroborate an extremely high dislocation density at the microscale and indicate a cell-like dislocation network structure existing in the AM Ta at the sub-μm scale.

36 MATERIALS SCIENCE↗