Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Effects of Lateral Plasma Density and Temperature Diffusion on VCSEL Performance

The hydrodynamic model is further verified by applying to a gain-guided single mode VCSEL. DC effects of D(sub NN): (1) increase threshold current J(sub th) and decrease slope efficiency; (2) within the studied range (50% pumping within threshold and realistic diffusion coefficient for a single mode), the L-I relation scales with the relative Injection current (J/J(sub th) - 1). AC effects of D(sub NN): (1) decrease spectral bandwidth and responsivity of direct-current modulation; (2) within the studied range, the frequency response follows the same formal dependence as predicted without diffusion and under a linear gain model, while the resonant frequency position similarly scales with the relative injection current; (3) therefore, it is concluded that the AC effects of D(sub NN) is purely of static nature and reflected via its influence on ot and J(sub th). Within this study, the nonlinear effects of D(sub NN) are mostly reproducible with an equivalent constant diffusion coefficient.

Li, Jian-Zhong↗

Diffusion and adsorption of methane confined in nanoporous carbon aerogel: a combined quasi-elastic and small-angle neutron scattering study

The diffusion of methane confined in nano-porous carbon aerogel with the average pore size 48 {angstrom} and porosity 60% was investigated as a function of pressure at T = 298 K using quasi-elastic neutron scattering (QENS). The diffusivity of methane shows a clear effect of confinement: it is about two orders of magnitude lower than in bulk at the same thermodynamic conditions and is close to the diffusivity of liquid methane at 100 K (i.e. {approx} 90 K below the liquid-gas critical temperature T{sub C} {approx} 191 K). The diffusion coefficient (D) of methane initially increases with pressure by a factor of {approx}2.5 from 3.47 {+-} 0.41 x 10{sup -10} m{sup 2} s{sup -1} at 0.482 MPa to D = 8.55 {+-} 0.33 x 10{sup -10} m{sup 2} s{sup -1} at 2.75 MPa and starts to decrease at higher pressures. An explanation of the observed non-monotonic behavior of the diffusivity in the confined fluid is based on the results of small-angle neutron scattering experiments of the phase behavior of methane in a similar carbon aerogel sample. The initial increase of the diffusion coefficient with pressure is explained as due to progressive filling of bigger pores in which molecular mobility in the internal pore volume is less affected by the sluggish liquid-like molecular mobility in the adsorbed phase. Subsequent decrease of D, is associated with the effect of intermolecular collisions, which result in a lower total molecular mobility with pressure, as in the bulk state. The results are compared with the available QENS data on the methane diffusivity in zeolites, metal organic frameworks, and porous silica as well as with the molecular dynamics simulations of methane in nano-porous carbons and silica zeolites.

03 NATURAL GAS↗

Experimental observation of electron bounce resonance through electron energy distribution measurement in a finite size inductively coupled plasma

The electron bounce resonance was experimentally investigated in a low pressure planar inductively coupled plasma. The electron energy probability functions (EEPFs) were measured at different chamber heights and the energy diffusion coefficients were calculated by the kinetic model. It is found that the EEPFs begin to flatten at the first electron bounce resonance condition, and the plateau shifts to a higher electron energy as the chamber height increases. The plateau which indicates strong electron heating corresponds not only to the electron bounce resonance condition but also to the peaks of the first component of the energy diffusion coefficients. As a result, the plateau formation in the EEPFs is mainly due to the electron bounce resonance in a finite inductive discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conversion Kinetics and Ionic Conductivity in Na-β”-Alumina + YSZ (Naβ”AY) Sodium Solid Electrolyte via Vapor Phase Conversion Process

Sodium ion batteries have been receiving increasing attention and may see potential revival in the near future, particularly in large-scale grid energy storage coupling with wind and solar power generation, due to the abundant sodium resources, low cost, and sufficiently high energy density. Among the known sodium ion conductors, the Na-β”-alumina electrolyte remains highly attractive because of its high ionic conductivity. This study focuses on the vapor phase synthesis of a Na-β”-Alumina + YSZ (Naβ”AY) composite sodium electrolyte, which has higher mechanical strength and stability than conventional single phase β”-Alumina. The objectives are the measurement of conversion kinetics through a newly developed weight-gain based model and the determination of sodium ionic conductivity in the composite electrolyte. Starting samples contained ~70 vol% α-Alumina and ~30 vol% YSZ (3 mol% Y 2 O 3 stabilized Zirconia) with and without a thin alumina surface layer made by sintering in air at 1600 °C. The sintered samples were placed in a powder of Na-β”-alumina and heat-treated at 1250 °C for various periods. Sample dimensions and weight were measured as a function of heat treatment time. The conversion of α-Alumina in the α-Alumina + YSZ composite into Naβ”AY occurred by coupled diffusion of sodium ions through Na-β”-alumina and of oxygen ions through YSZ, effectively diffusing Na2O. From the analysis of the time dependence of sample mass and dimensions, the effective diffusion coefficient of Na 2 O through the sample, D eff , was estimated to be 1.74 x 10 -7 cm2 s -1 , and the effective interface transfer parameter, k eff , was estimated as 2.33 x 10 -6 cm s -1 . By depositing a thin alumina coating layer on top of the bulk composite, the chemical diffusion coefficient of oxygen through single phase Na-β”-alumina was estimated as 4.35 x 10 -10 cm 2 s -1 . An AC impedance measurement was performed on a fully converted Naβ”AY composite, and the conductivity of the composite electrolyte was 1.3 x 10 -1 S cm -1 at 300 °C and 1.6 x 10 -3 S cm -1 at 25 °C, indicating promising applications in solid state or molten salt batteries at low to intermediate temperatures.

36 MATERIALS SCIENCE↗

The role of magnetic helicity in cosmic ray transport theory

The pitch angle scattering of cosmic ray is modified greatly if the medium through which they propagate contains significant amounts of magnetic helicity. When helicity is present in the medium, the often used expression for the pitch angle diffusion coefficient derived from quasilinear theory must be modified. These modifications are illustrated for slab and isotropic symmetries. Using measurements of helicity in the solar wind determined from single point measurements of the correlation tensor of magnetic fluctuations obtained from Voyager 2, the effects of the observed helicity on both the pitch angle and spatial diffusion coefficients are estimated.

Goldstein, M. L.↗

Tidal influences on vertical diffusion and diurnal variability of ozone in the mesosphere

Possible dynamical influences on the diurnal behavior of ozone are investigated. A time dependent one-dimensional photochemical model is developed for this purpose; all model calculations are made at 70 deg N during summer. It is shown that the vertical diffusion can vary as much as 1 order of magnitude within a day as a result of large changes in the zonal wind induced by atmospheric thermal tides. It is found that by introducing a dissipation time scale for turbulence produced by breaking gravity waves, the agreement with Poker Flat echo data is improved. Comparisons of results from photochemical model calculations, where the vertical diffusion is a function of height only, with those in which the vertical diffusion coefficient is changing in time show large differences in the diurnal behavior of ozone between 70 and 90 km. By including the dynamical effect, much better agreement with the Solar Mesosphere Explorers data is obtained. The results are, however, sensitive to the background zonally averaged wind. The influence of including time-varying vertical diffusion coefficient on the OH densities is also large, especially between 80 and 90 km. This suggests that dynamical effects are important in determining the diurnal behavior of the airglow emission from the Meinel bands.

Bjarnason, Gudmundur G.↗

Charm diffusion in a pion gas implementing unitarity, chiral and heavy quark symmetries

We compute the charm drag and diffusion coefficients in a hot pion gas, such as is formed in a heavy ion collision after the system cools sufficiently to transit into the hadron phase. We fully exploit heavy quark effective theory (with both D and D{sup *} mesons as elementary degrees of freedom during the collision) and chiral perturbation theory, and employ standard unitarization to reach higher temperatures. We find that a certain friction and shear diffusion coefficients are almost p{sup 2}-independent at a fixed temperature which simplifies phenomenological analysis. At the higher end of reliability of our calculation, T{approx_equal}150MeV, we report a charm relaxation length {lambda}{sub c}{approx_equal}40fm, in agreement with the model estimate of He, Fries and Rapp. The momentum of a 1 GeV charm quark decreases about 50 MeV per fermi when crossing the hadron phase. - Highlights: > We compute charm drag and diffusion in a pion gas (in heavy ion collisions). > We employ effective theory (both chiral and heavy quark). > We unitarize the perturbative amplitude for realistic cross-sections. > A charm quark with momentum 1 GeV loses 50 MeV per fermi (drag). > The momentum distribution broadens some 100 MeV per fermi (diffusion).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photochemistry of the Martian atmosphere

A critical analysis is carried out for models which may be fine tuned to give agreement with observational constraints for O2, CO, and O3 in the Martian lower atmosphere and which are in accord also with upper atmospheric data for O and CO. The models have a number of features in common: dynamic mixing must be exceedingly rapid at heights above 90 km; if heterogeneous processes are not assumed to play a major role in the removal of atmospheric CO and O2, mixing must be rapid at heights between 30 and 40 km. The value implied for the diffusion coefficient in this region depends on the assumptions made regarding the rates for reaction of OH with HO2 to form H2O and the rate of reaction of HO2 with itself to form H2O2. If these reaction rates are taken to have values similar to those used in current models of the earth's stratosphere, the eddy diffusion coefficient at 40 km above the Martian surface should be about 5 by 10 to the seventh power sq cm/sec.

Kong, T. Y.↗

Drag of heavy quarks in quark gluon plasma at energies available at the CERN Large Hadron Collider (LHC)

The drag and diffusion coefficients of charm and bottom quarks propagating through quark gluon plasma (QGP) have been evaluated for conditions relevant to nuclear collisions at the Large Hadron Collider (LHC). The dead cone and Landau-Pomeronchuk-Migdal (LPM) effects on radiative energy loss of heavy quarks have been considered. Both radiative and collisional processes of energy loss are included in the effective drag and diffusion coefficients. With these effective transport coefficients, we solve the Fokker-Plank (FP) equation for the heavy quarks executing Brownian motion in the QGP. The solution of the FP equation has been used to evaluate the nuclear suppression factor, R{sub AA}, for the nonphotonic single-electron spectra resulting from the semileptonic decays of hadrons containing charm and bottom quarks. The effects of mass on R{sub AA} have also been highlighted.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Helium in the topside Venus ionosphere.

The amount of helium in the Venus atmosphere can be estimated from an examination of the measured ionization profiles and from the recent discovery of radioactive materials in the Venus crust. The amount necessary to give agreement between computed and experimental results is approximately 400,000,000 per cu cm at 140 km. When a nominal value of the eddy diffusion coefficient of 1,000,000 sq cm per sec is used, the atmospheric helium mixing ratio is found to be 0.00006, nearly ten times that for the earth. If agreement is required between the helium mixing ratio estimated from an earth-like distribution of crustal radioactive materials and from the measured ionization profile, the required eddy diffusion coefficient would be 5,000,000 sq cm per sec.

Herman, J. R.↗

Pioneer 10 ultraviolet photometer observations at Jupiter encounter

A two-channel extreme ultraviolet photometer on Pioneer 10 was used to investigate hydrogen and helium emissions from the atmosphere of Jupiter and emissions associated with the Galilean satellites. The hydrogen Lyman alpha signal observed from Jupiter corresponded to 400 R in brightness. By using the results of Wallace and Hunten (1973), the eddy diffusion coefficient is found to be K = 3 x 10 to the (8 plus or minus 1) power. The He I 584-A emission rate was found to be 5.1 R. The radiative transfer problem for the resonantly scattered He I emissions was investigated in the coherent approximation. With these results, the observed brightness, and the derived eddy diffusion coefficient the He/H2 ratio in the mixing region of the atmosphere was found to be equal to 0.18 minus 0.12 or plus 0.46. Emissions attributed to H I Lyman alpha were found at the orbital radius of Io and appear to be due to resonance scattering by a toroidal cloud of H in orbit around Jupiter.

Carlson, R. W.↗

Seasonal and magnetic storm related changes in the thermosphere induced by eddy mixing

The possibility of explaining the seasonal and magnetic storm related changes in the thermosphere and the ionosphere through variation in eddy diffusion coefficient in the lower thermosphere is investigated theoretically by obtaining simultaneous numerical solutions of the relevant continuity, momentum, and energy balance equations in a self-consistent manner. It is shown that various important features of thermospheric seasonal behavior, including the winter helium bulge phenomenon, can be explained by assuming effective reduction in the winter-time eddy diffusion coefficient by about one order of magnitude. Storm related changes in the thermal structure and composition are seen to arise by assuming a downward shift of turbulence. Physical implications and relative significance of variation in thermospheric turbulence and large scale inter-hemispheric circulation are briefly discussed.

Sinha, A. K.↗

Application of a planetary wave breaking parameterization to stratospheric circulation statistics

The planetary wave parameterization scheme developed recently by Garcia is applied to statospheric circulation statistics derived from 12 years of National Meteorological Center operational stratospheric analyses. From the data a planetary wave breaking criterion (based on the ratio of the eddy to zonal mean meridional potential vorticity (PV) gradients), a wave damping rate, and a meridional diffusion coefficient are calculated. The equatorward flank of the polar night jet during winter is identified as a wave breaking region from the observed PV gradients; the region moves poleward with season, covering all high latitudes in spring. Derived damping rates maximize in the subtropical upper stratosphere (the 'surf zone'), with damping time scales of 3-4 days. Maximum diffusion coefficients follow the spatial patterns of the wave breaking criterion, with magnitudes comparable to prior published estimates. Overall, the observed results agree well with the parameterized calculations of Garcia.

Randel, William J.↗

Molecular Dynamics Simulation of Tri-n-Butyl-Phophate Liquid: A Force Field Comparative Study

Molecular dynamics (MD) simulations were conducted to compare the performance of four force fields in predicting thermophysical properties of tri-n-butyl-phosphate (TBP) in the liquid phase. The intramolecular force parameters used were from the Assisted Model Building with Energy Refinement (AMBER) force field model. The van der Waals parameters were based on either the AMBER or the Optimized Potential for Liquid Simulation (OPLS) force fields. The atomic partial charges were either assigned by performing quantum chemistry calculations or utilized previously published data, and were scaled to approximate the average experimental value of the electric dipole moment. Canonical ensemble computations based on the aforementioned parameters were performed near the atmospheric pressure and temperature to obtain the electric dipole moment, mass density, and self-diffusion coefficient. In addition, the microscopic structure of the liquid was characterized via pair correlation functions between selected atoms. It has been demonstrated that the electric dipole moment can be approximated within 1% of the average experimental value by virtue of scaled atomic partial charges. The liquid mass density can be predicted within 0.5-1% of its experimentally determined value when using the corresponding charge scaling. However, in all cases the predicted self- diffusion coefficient is significantly smaller than a commonly quoted experimental measurement; this result is qualified by the fact that the uncertainty of the experimental value was not available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoscale Simulation of Proton Transport in Proton Exchange Membranes

Previous efforts to model proton transport through fuel cell membranes have largely focused on disparate length scales: molecular dynamics at the atomistic level and fuel cell stack engineering approaches at the macroscale. A new multiscale approach to bridge these extremes is proposed in this work which combines concepts from coarse-grained (CG) modeling with smoothed particle hydrodynamics (SPH) to capture the qualitative morphology and transport behavior of a proton exchange membrane at the length scale of tens of nanometers. This method allows for connection to atomistic simulations via the inclusion of transport coefficients from molecular dynamics and coarse-grained forces derived for the polymer backbone, side chain, proton, and water interactions. Information pertaining to macroscopic conductivity is obtained by volume averaging based on the flux and chemical potential fields within the membrane. Proton transport is effectively coarse-grained via introduction of a composition variable associated with each interacting site which carries the field information. By combining this technique with local electrostatics and coordinate dependent diffusion constants, the effects of double layer formation within the water pores and the influence of proximity to sulfonate groups on transport is recovered. The combined CG-SPH method is validated and subsequently applied to an equilibrated hydrated Nafion structure with a box length of 40 nm. The resulting conductivities calculated for the material agree very well with trends from experiment and provide insight into the complex interplay of morphology, proton distribution, and diffusion coefficients at a length scale that can be expanded beyond feasible atomistic molecular dynamics simulations to capture the effects of mesoscopic morphology on proton conduction.

Jorn, Ryan↗

Signature of Low-Dimensional Diffusion in Complex Systems

We present a clear signature of the dimensionality of water diffusion in a powder sample of a synthetic hectorite (a model clay), by analyzing the corresponding neutron scattering functions. The data follow the theoretical predictions for a powder-averaged two-dimensional diffusion, with a two-dimensional diffusion coefficient of 0.75x10{sup -9} m{sup 2} s{sup -1}. Neutron scattering data of bulk water are used as a reference, representing motion in three dimensions. The approach is based on analyzing the scattered intensity at zero energy transfers, along with the broadening of the scattering functions, collected at a wide range of energy resolutions. The mathematical relationship between these two quantities follows, for a given shape of the resolution function, a universal master curve, independent of the diffusion coefficient, but strongly dependent on the dimensionality of the motion, which can thus be determined with clarity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diffusion in mixed solvents. II - The heat of mixing parameter

Correlation of second-order rate constants for many reactions involving electron transfer between organic molecules, solvated electron reactions, iodine diffusion coefficients, and triplet state electron transfer reactions has been made with the heat of mixing parameter (HMP) for the aqueous binary solvent systems. The aqueous binary solvents studied are those containing methanol or ethanol (type I solvent); 1-propanol or tert-butyl alcohol (type II solvent); or sucrose or glycerol (type III solvent). A plot of the HMP vs. the diffusion parameter for each reaction yields superimposable curves for these reactions in a particular solvent mixture over the entire solvent mixture range, irrespective of the value of the reaction's rate constant or diffusion coefficient in water.

Carapellucci, P. A.↗