Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The Electron Thermal Conductivity of Pu and Zr Substituted Gamma-Uranium

Uranium alloys are attractive recycled nuclear fuels because of their high thermal conductivity (k) and fissile density; however, the effects of alloying elements on k remain unclear. Here, the electron thermal conductivity (k_e) of U-Pu-Zr compositions are calculated using density functional theory. The electronic structure is evaluated to understand the effects of plutonium (Pu) and zirconium (Zr) substitution on the k_e of ?-U. Alloys of up to 37.5 at. % Pu and 37.5 at. % Zr are examined. Two methods are applied to calculate k_e; we find that the accuracy of each method depends on the electronic and mass similarities between the solute and solvent atoms. Specifically, when the solute atom is similar in electronic structure and mass, the method that applies the electron relaxation time of ?-U is best, while if the elements are dissimilar, a mixed method that mixes several parameters associated with k_e from each element in the alloy is best. The introduction of all alloying elements decreases k_e; however, in binary compounds, Pu and Zr have different effects. Pu generally flattens the electronic bands but compensates for this deleterious effect by increasing electron density near the Fermi level. Zr flattens the electronic bands more severely without adding electron density near the Fermi level. Therefore, Zr decreases the k_e more than Pu in binary compounds. In ternary compounds, the difference between Pu and Zr is minimal due to the phononic change from the large mass change of Zr substitution, even at 12.5 at. %. Thus, we predict that higher loadings of Pu, and potentially other actinides, can be added to U-Pu-Zr compositions for faster recycling of spent fuel with without sacrificing k. We also note that these k_e calculation methods can be applied to non-fuel alloys that require k_e predictions, such as cladding, heat exchanger, and structural materials.

36 MATERIALS SCIENCE↗

Direct observation of bias-dependence potential distribution in metal/HfO{sub 2} gate stack structures by hard x-ray photoelectron spectroscopy under device operation

Although gate stack structures with high-k materials have been extensively investigated, there are some issues to be solved for the formation of high quality gate stack structures. In the present study, we employed hard x-ray photoelectron spectroscopy in operating devices. This method allows us to investigate bias dependent electronic states, while keeping device structures intact. Using this method, we have investigated electronic states and potential distribution in gate metal/HfO{sub 2} gate stack structures under device operation. Analysis of the core levels shifts as a function of the bias voltage indicated that a potential drop occurred at the Pt/HfO{sub 2} interface for a Pt/HfO{sub 2} gate structure, while a potential gradient was not observed at the Ru/HfO{sub 2} interface for a Ru/HfO{sub 2} gate structure. Angle resolved photoelectron spectroscopy revealed that a thicker SiO{sub 2} layer was formed at the Pt/HfO{sub 2} interface, indicating that the origin of potential drop at Pt/HfO{sub 2} interface is formation of the thick SiO{sub 2} layer at the interface. The formation of the thick SiO{sub 2} layer at the metal/high-k interface might concern the Fermi level pinning, which is observed in metal/high-k gate stack structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interpolative Separable Density Fitting Decomposition for Accelerating Hybrid Density Functional Calculations with Applications to Defects in Silicon

We present a new efficient way to perform hybrid density functional theory (DFT)-based electronic structure calculations. The new method uses an interpolative separable density fitting (ISDF) procedure to construct a set of numerical auxiliary basis vectors and a compact approximation of the matrix consisting of products of occupied orbitals represented in a large basis set such as the planewave basis. Such an approximation allows us to reduce the number of Poisson solves from O ($N$ $^{2}_{ϵ}$) to O ( N ϵ ) when we apply the exchange operator to occupied orbitals in an iterative method for solving the Kohn–Sham equations, where Ne is the number of electrons in the system to be studied. We show that the ISDF procedure can be carried out in O ($N$ $^{3}_{ϵ}$) operations, with a much smaller preconstant compared to methods used in existing approaches. When combined with the recently developed adaptively compressed exchange (ACE) operator formalism, which reduces the number of times the exchange operator needs to be updated, the resulting ACE-ISDF method significantly reduces the computational cost associated with the exchange operator by nearly 2 orders of magnitude compared to existing approaches for a large silicon system with 1000 atoms. We demonstrate that the ACE-ISDF method can produce accurate energies and forces for insulating and metallic systems and that it is possible to obtain converged hybrid functional calculation results for a 1000-atom bulk silicon within 10 min on 2000 computational cores. We also show that ACE-ISDF can scale to 8192 computational cores for a 4096-atom bulk silicon system. We use the ACE-ISDF method to geometrically optimize a 1000-atom silicon system with a vacancy defect using the HSE06 functional and computes its electronic structure. Here, we find that that the computed energy gap from the HSE06 functional is much closer to the experimental value compared to that produced by semilocal functionals in the DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and optical properties of quantum crystals from first principles calculations in the Born–Oppenheimer approximation

In this work, we develop a formalism to accurately account for the renormalization of the electronic structure due to quantum and thermal nuclear motions within the Born–Oppenheimer approximation. We focus on the fundamental energy gap obtained from electronic addition and removal energies from quantum Monte Carlo calculations in either the canonical or grand-canonical ensembles. The formalism applies as well to effective single electron theories such as those based on density functional theory. We show that the electronic (Bloch) crystal momentum can be restored by marginalizing the total electron–ion wave function with respect to the nuclear equilibrium distribution, and we describe an explicit procedure to establish the band structure of electronic excitations for quantum crystals within the Born–Oppenheimer approximation. Based on the Kubo–Greenwood equation, we discuss the effects of nuclear motion on optical conductivity. Our methodology applies to the low temperature regime where nuclear motion is quantized and, in general, differs from the semi-classical approximation. We apply our method to study the electronic structure of C2/c-24 crystalline hydrogen at 200 K and 250 GPa and discuss the optical absorption profile of hydrogen crystals at 200 K and carbon diamond at 297 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anatase TiO{sub 2} nanowires functionalized by organic sensitizers for solar cells: A screened Coulomb hybrid density functional study

The adsorption of two different organic molecules cyanidin glucoside (C{sub 21}O{sub 11}H{sub 20}) and TA-St-CA on anatase (101) and (001) nanowires has been investigated using the standard and the range separated hybrid density functional theory calculations. The electronic structures and optical spectra of resulting dye–nanowire combined systems show distinct features for these types of photochromophores. The lowest unoccupied molecular orbital of the natural dye cyanidin glucoside is located below the conduction band of the semiconductor while, in the case of TA-St-CA, it resonates with the states inside the conduction band. The wide-bandgap anatase nanowires can be functionalized for solar cells through electron-hole generation and subsequent charge injection by these dye sensitizers. The intermolecular charge transfer character of Donor-π-Acceptor type dye TA-St-CA is substantially modified by its adsorption on TiO{sub 2} surfaces. Cyanidin glucoside exhibits relatively stronger anchoring on the nanowires through its hydroxyl groups. The atomic structures of dye–nanowire systems re-optimized with the inclusion of nonlinear solvation effects showed that the binding strengths of both dyes remain moderate even in ionic solutions.

36 MATERIALS SCIENCE↗

Higher-order adaptive finite-element methods for Kohn–Sham density functional theory

We present an efficient computational approach to perform real-space electronic structure calculations using an adaptive higher-order finite-element discretization of Kohn–Sham density-functional theory (DFT). To this end, we develop an a priori mesh-adaption technique to construct a close to optimal finite-element discretization of the problem. We further propose an efficient solution strategy for solving the discrete eigenvalue problem by using spectral finite-elements in conjunction with Gauss–Lobatto quadrature, and a Chebyshev acceleration technique for computing the occupied eigenspace. The proposed approach has been observed to provide a staggering 100–200-fold computational advantage over the solution of a generalized eigenvalue problem. Using the proposed solution procedure, we investigate the computational efficiency afforded by higher-order finite-element discretizations of the Kohn–Sham DFT problem. Our studies suggest that staggering computational savings—of the order of 1000-fold—relative to linear finite-elements can be realized, for both all-electron and local pseudopotential calculations, by using higher-order finite-element discretizations. On all the benchmark systems studied, we observe diminishing returns in computational savings beyond the sixth-order for accuracies commensurate with chemical accuracy, suggesting that the hexic spectral-element may be an optimal choice for the finite-element discretization of the Kohn–Sham DFT problem. A comparative study of the computational efficiency of the proposed higher-order finite-element discretizations suggests that the performance of finite-element basis is competing with the plane-wave discretization for non-periodic local pseudopotential calculations, and compares to the Gaussian basis for all-electron calculations to within an order of magnitude. Further, we demonstrate the capability of the proposed approach to compute the electronic structure of a metallic system containing 1688 atoms using modest computational resources, and good scalability of the present implementation up to 192 processors.

97 MATHEMATICS AND COMPUTING↗

Experimental and theoretical study of topology and electronic correlations in PuB 4

We synthesize single crystals of PuB 4 using an Al-flux technique. Single-crystal diffraction data provide structural parameters for first-principles density functional theory (DFT) calculations. By computing the density of states, the Z 2 topological invariant using the Wilson loop method, and the surface electronic structure from slab calculations, we find that PuB 4 is a nonmagnetic strong topological insulator with a band gap of 254 meV. Our magnetic susceptibility, heat capacity, and resistivity measurements are consistent with this analysis, albeit with a smaller gap of 35 meV. DFT plus dynamical mean-field theory calculations show that electronic correlations reduce the size of the band gap, and provide better agreement with the value determined by resistivity. Furthermore, these results demonstrate that PuB 4 is a promising actinide material to investigate the interplay of electronic correlations and nontrivial topology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Investigation of Structural Stability and Electronic and Magnetic Properties of the Half-Heusler Alloys: MTiSb (M = Fe, Co, and Ni)

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater–Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Investigation of Structural, Electronic, and Magnetic Properties of Cr-Doped ZnS and ZnSe in Wurtzite Structure

Using the first-principles calculations with the full potential linear muffin–tin orbital (FP-LMTO) method, we investigated the structural, electronic, and magnetic properties of Zn{sub 1−x}Cr{sub x}(S,Se)-diluted magnetic semiconductors (DMSs) in wurtzite structures with varying concentrations (x = 0.0625, x = 0.125, and x = 0.25) of Cr. The electronic properties indicated that Zn{sub 1−x}Cr{sub x}(S,Se), in all concentrations, exhibited half-metallic ferromagnetic (HMF) behavior with spin polarization of 100%. The density of states showed a hybridization between the p(S, Se) and 3d(Cr) states, which created an antibonding state in the gap that stabilized the ferromagnetic ground state linked to the double-exchange mechanism. Therefore, these compounds are highly likely candidates for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Electronic Structure and Spectra of Triphenylamines Functionalized by Phenylethynyl Groups

We study the features of the electronic structure and the IR, UV, and visible spectra of a series of triphenylamines substituted with phenylethynyl groups. The analysis is performed at the level of the density functional theory (DFT) and its nonstationary version in comparison with the experimental data of IR and electron spectroscopy. It is shown that, in the excited state, there is a change in the alternation of single, double, and triple bonds in accordance with the character of bonding and antibonding in the lowest vacant molecular orbital. The gradual introduction of additional phenylethynyl groups does not cause frequency shifts in the IR spectra of the molecules under study, but significantly affects the intensity of the corresponding IR bands. A similar effect is also observed in the electronic-absorption spectra of these compounds. This can be used for optical tuning of triphenylamines as promising materials for organic light-emitting diodes and solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Describing long-range charge-separation processes with subsystem density-functional theory

Long-range charge-transfer processes in extended systems are difficult to describe with quantum chemical methods. In particular, cost-effective (non-hybrid) approximations within time-dependent density functional theory (DFT) are not applicable unless special precautions are taken. Here, we show that the efficient subsystem DFT can be employed as a constrained DFT variant to describe the energetics of long-range charge-separation processes. A formal analysis of the energy components in subsystem DFT for such excitation energies is presented, which demonstrates that both the distance dependence and the long-range limit are correctly described. In addition, electronic couplings for these processes as needed for rate constants in Marcus theory can be obtained from this method. It is shown that the electronic structure of charge-separated states constructed by a positively charged subsystem interacting with a negatively charged one is difficult to converge — charge leaking from the negative subsystem to the positive one can occur. This problem is related to the delocalization error in DFT and can be overcome with asymptotically correct exchange–correlation (XC) potentials or XC potentials including a sufficiently large amount of exact exchange. We also outline an approximate way to obtain charge-transfer couplings between locally excited and charge-separated states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exchange repulsive potential adaptable for electronic structure changes during chemical reactions

Hybrid methods combining quantum mechanical (QM) and classical calculations are becoming important tools in chemistry. The popular approach to calculate the interaction between QM and classical calculations employs interatomic potentials. In most cases, the interatomic potential is constructed of an electrostatic (ES) potential and a non-ES potential. Because QM treatment is employed in the calculation of the ES potential, the electronic change can be considered in this ES potential. However, QM treatment of the non-ES potential is difficult because of high computational cost. To overcome this difficulty of evaluating the non-ES potential, we proposed an exchange repulsive potential as the main part of the non-ES potential on the basis of a QM approach. This potential is independent of empirical parameters and adaptable for electronic structure. We combined this potential with the reference interaction site model self-consistent field explicitly including spatial electron density distribution and successfully applied it to the chemical reactions in aqueous phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of Coulomb correlations and spin-orbit coupling in SrIrO{sub 3}

Given that energy scales associated with crystal field splitting, spin orbit coupling and coulomb correlations in iridates are comparable, hence leading to exotic properties, we investigate the physical properties of orthorhombic SrIrO{sub 3} using density functional theory. Our calculations, however, show that SrIrO{sub 3} is a bad metal with no long range magnetic ordering, unlike its sister compounds Sr{sub 2}IrO{sub 4} and Sr{sub 3}Ir{sub 2}O{sub 7}. Moreover, despite having large band width, it appears conclusive that the larger resistivity in SrIrO{sub 3} is due to spin orbit interactions. Besides, the effects of electron-electron correlations on its electronic structure and magnetic properties are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flexibility of the factorized form of the unitary coupled cluster Ansatz

The factorized form of the unitary coupled cluster Ansatz is a popular state preparation Ansatz for electronic structure calculations of molecules on quantum computers. It is often viewed as an approximation (based on the Trotter product formula) for the conventional unitary coupled cluster operator. In this work, we show that the factorized form is quite flexible, allowing one to range from a conventional configuration interaction, to conventional unitary coupled cluster, to efficient approximations that lie in between these two. The variational minimization of the energy often allows simpler factorized unitary coupled cluster approximations to achieve high accuracy, even if they do not accurately approximate the Trotter product formula. This is similar to how quantum approximate optimization algorithms can achieve high accuracy with a small number of levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The correlation between acoustic and magnetic properties in the long working metal boiler drum with the parameters of the electron microscope

The present paper presents comparative analysis of measurement results of acoustic and magnetic properties in long working metal of boiler drums and the results obtained by methods of electronic microscopy. The structure of the metal sample from the fracture zone to the base metal (metal working sample long) and the center of the base metal before welding (weld metal sample) was investigated by electron microscopy. Studies performed by spectral acoustic, magnetic noise and electron microscopic methods were conducted on the same plots and the same samples of long working and weld metal of high-pressure boiler drums. The analysis of research results showed high sensitivity of spectral-acoustic and magnetic-noise methods to definition changes of microstructure parameters. Practical application of spectral-acoustic and magnetic noise NDT method is possible for the detection of irregularities and changes in structural and phase state of the long working and weld metal of boiler drums, made of a special molybdenum steel (such as 20M). The above technique can be used to evaluate the structure and physical-mechanical properties of the long working metal of boiler drums in the energy sector.

36 MATERIALS SCIENCE↗

Galvanomagnetic and thermoelectric properties of BiTeBr and BiTeI single crystals and their electronic structure

BiTeI and BiTeBr single crystals are synthesized by the Bridgman method, and their galvanomagnetic and thermoelectrical properties are investigated. Both semiconductors have n-type conductivity. The thermoelectric efficiency of BiTeBr is much higher than that of BiTeI, which is related mainly to a larger See-beck coefficient for the former compound. For both crystals, the band structure is calculated from the density-functional theory. It is shown that both compounds are semiconductors with an indirect energy band gap.

36 MATERIALS SCIENCE↗

Double-core excitations in formamide can be probed by X-ray double-quantum-coherence spectroscopy

The attosecond, time-resolved X-ray double-quantum-coherence four-wave mixing signals of formamide at the nitrogen and oxygen K-edges are simulated using restricted excitation window time-dependent density functional theory and the excited core hole approximation. These signals, induced by core exciton coupling, are particularly sensitive to the level of treatment of electron correlation, thus providing direct experimental signatures of electron and core-hole many-body effects and a test of electronic structure theories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗