Search NASA⌕ Search

SEARCH · Search NASA

Results for “facets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Assessment of the Degradation Mechanisms of Cu Electrodes during the CO 2 Reduction Reaction

Catalyst degradation and product selectivity changes are two of the key challenges in the electrochemical reduction of CO 2 on copper electrodes. Yet, these aspects are often overlooked. Here, we combine in situ X-ray spectroscopy, in situ electron microscopy, and ex situ characterization techniques to follow the long-term evolution of the catalyst morphology, electronic structure, surface composition, activity, and product selectivity of Cu nanosized crystals during the CO 2 reduction reaction. We found no changes in the electronic structure of the electrode under cathodic potentiostatic control over time, nor was there any build-up of contaminants. In contrast, the electrode morphology is modified by prolonged CO 2 electroreduction, which transforms the initially faceted Cu particles into a rough/rounded structure. In conjunction with these morphological changes, the current increases and the selectivity changes from value-added hydrocarbons to less valuable side reaction products, i.e. , hydrogen and CO. Hence, our results suggest that the stabilization of a faceted Cu morphology is pivotal for ensuring optimal long-term performance in the selective reduction of CO 2 into hydrocarbons and oxygenated products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing Overall Water Splitting on Single Microcrystals of Phosphorus-Doped BiVO 4 by Photo-SECM

Particulate bismuth vanadate (BiVO4) has attracted considerable interest as a promising photo(electro)catalyst for visible-light-driven water oxidation, however, overall water splitting (OWS) has been difficult to attain because its conduction band is too positive for efficient hydrogen evolution. Using photo-scanning electrochemical microscopy (photo-SECM) with a chemically modified nanotip, we visualized for the first time the OWS at a single truncated bipyramidal microcrystal of phosphorus-doped BiVO 4 . The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe and quantitatively measure local oxygen and hydrogen fluxes. The obtained current patterns for both O 2 and H 2 agree well with the accumulation of photogenerated holes and electrons on {010} basal and {110} lateral facets, respectively. Furthermore, the developed experimental approach is an important step towards nanoelectrochemical mapping of the activity of photocatalyst particles at the sub-facet level.

bismuth vanadate↗

Direct In-situ TEM Observation Of Modification Of Oxidation By The Injected Vacancies For Ni-4Al Alloy Using A Microfabricated Nanopost

Vacancy injection and selective oxidation of one specie in bimetallic alloy at high temperature is a well-known phenomenon. However, detailed understanding of the behavior of the injected vacancies and consequently their behavior and effect on oxidation remains elusive. The current research examines the oxidation of high-purity Ni doped with 4.1 at% Al using in-situ transmission electron microscopy (TEM). Experiments are performed on nanoposts fabricated from solution-annealed bulk material that are essentially single crystal samples. Initial oxidation is observed to occur by multi-site oxide nucleation, formation of an oxide shell followed by cavity nucleation and growth at the metal/oxide interface. One of the most interesting in-situ TEM observations is the formation of a cavity that leads to the faceting of the metal on (111) surface and subsequent oxidation occurring by an atomic ledge migration mechanism on the faceted metal surface. Further, it is directly observed that metal atoms diffuse through the oxide layer to combine with oxygen at the outer surface of the oxide. The present work indicates that injection of vacancies and formation of cavity will lead to a situation where the oxidation rate is essentially controlled by the low surface energy plane of the metal, rather than by the initial terminating plane at the metal surface exposed to the oxidizing environment.

36 MATERIALS SCIENCE↗

Enhancing the Ion Transport in LiMn 1.5 Ni 0.5 O 4 by Altering the Particle Wulff Shape via Anisotropic Surface Segregation

Spontaneous and anisotropic surface segregation of W cations in LiMn 1.5 Ni 0.5 O 4 particles can alter the Wulff shape and improve surface stability, thereby significantly improving the electrochemical performance. An Auger electron nanoprobe was employed to identify the anisotropic surface segregation, whereby W cations prefer to segregate to {110} surface facets to decrease its relative surface energy according to Gibbs adsorption theory and subsequently increase its surface area according to Wulff theory. Consequently, the rate performance is improved (e.g., by ∼5-fold at a high rate of 25C) because the {110} facets have more open channels for fast lithium ion diffusion. Furthermore, X-ray photoelectron spectroscopy (XPS) depth profiling suggested that the surface segregation and partial reduction of W cation inhibit the formation of Mn 3+ on surfaces to improve cycling stability via enhancing the cathode electrolyte interphase (CEI) stability at high charging voltages. Here, this is the first report of using anisotropic surface segregation to thermodynamically control the particle morphology as well as enhancing CEI stability as a facile, and potentially general, method to significantly improve the electrochemical performance of battery electrodes. Combining neutron diffraction, an Auger electron nanoprobe, XPS, and other characterizations, we depict the underlying mechanisms of improved ionic transport and CEI stability in high-voltage LiMn 1.5 Ni 0.5 O 4 spinel materials.

Wulff shape↗

Hydrolysis of Acetamide on Low-Index CeO 2 Surfaces: Ceria as a Deamidation and General De-esterification Catalyst

Using DFT calculations and acetamide as the main example, we show that ceria is a potential catalyst for the hydrolysis of amide and similar bonds. The overall reaction is endergonic in the gas phase, yielding acetic acid and ammonia, but is slightly exergonic in the aqueous phase, which facilitates ionization of the products (CH 3 COO – and NH 4 + ). Neighboring Ce and O sites on the CeO 2 (111), (110), and (100) facets are conducive to the formation of an activated metastable tetrahedral intermediate (TI) complex, followed by C–N bond scission. With van der Waals and solvation effects taken into account, the overall reaction energetics is found to be most favorable on the (111) facet as desorption of acetic acid is much more uphill energetically on (110) and (100). We further suggest that the Ce–O–Ce sites on ceria surfaces can activate X(=Y)–Z type bonds in amides, amidines, and carboxylate and phosphate esters, among many others that we term “generalized esters”. A Brønsted-Evans–Polanyi relationship is identified correlating the stability of the transition and final states of the X–Z generalized ester bond scission. A simple descriptor (ΣΔχ) based on the electronegativity of the atoms that constitute the bond (X, Y, Z) versus those of the catalytic site (O, Ce, Ce) captures the trend in the stability of the transition state of generalized ester bond scission and suggests a direction for modifying ceria for targeting specific organic substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen

Electrocatalytic conversion of nitrate in waste can enable efficient waste remediation (NO 3 - to N 2 ) or waste valorization (NO 3 - to NH 4 + ) depending on the selectivity of the catalyst. Palladium and copper electrocatalysts typically exhibit ideal nitrate and nitrite binding properties, allowing for effective destruction of nitrate. However, rational steering of selectivity through material design remains a critical challenge for PdCu electrocatalyst. Here, we use the electrochemical underpotential deposition method to synthesize palladium nanocube electrocataysts with controlled copper surface coverage (e.g., partial and full copper coatings). We then examine the potential for NO 3 - destruction (conversion) and NO 2 - reduction reaction. We identify that partial copper-coated Pd nanocubes not only effectively facilitate the reduction of 95% of NO 3 - but also increase the reduction of NO 2 - to N 2 with 89% selectivity over 20 consecutive cycles (80 h). We also show that under these conditions, the Pd(100) surface facet is exposed. Complete copper-covered Pd nanocubes effectively facilitate the reduction of ~99% of NO 3 - . Complete coverage of copper; however, prevented exposure of Pd(100) surface facet, promoting the selective reduction of NO 2 - to NH 4 + with a 70% selectivity over 20 consecutive cycles (80 h). Density functional theory (DFT) calculations show that NO 3 - and NO 2 - adsorb more strongly on the Cu(100) surface compared to the Pd(100) surface, while the NO* intermediate generated from NO 3 - or NO 2 - reduction adsorbs more strongly on the Pd surface. Furthermore, barrier calculations show that NO* can readily migrate from the Cu domain to the Pd domain and that the N–N coupling barrier on Pd is significantly diminished at high NO* coverage. Together, these results suggest that the high N 2 selectivity observed on the PdCu electrocatalyst is caused by the spillover of NO* from the Cu domains to the Pd domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the Effect of Surface Platinum–Tin Alloys on Propane Dehydrogenation on Platinum–Tin Catalysts

Uncertainty analysis, reported experimental literature data, and density functional theory were synthesized to model the effect of surface tin coverage on platinum-based catalysts for nonoxidative propane dehydrogenation to propylene. Here, this study tests four different platinum–tin skin surface models as potential catalytic sites, Pt 3 Sn/Pt(100), PtSn/Pt(100), Pt 3 Sn/Pt(111), and Pt 2 Sn/Pt(211), and compares them to the corresponding pure Pt surface sites using an uncertainty analysis methodology that uses BEEF-vdW with its ensembles (BMwE) to generate the uncertainty for the energies of the intermediates and transition states. One experimental data set with two experimental observations, selectivity to propylene and turnover frequency of propylene, was used as a calibration data set to evaluate the impact of the experimental data on informing the models. This study finds that the prior model for Pt 3 Sn/Pt(100) is the most active and Pt 2 Sn/Pt(211) is the most selective toward propylene. Active sites on the (100) facet have the highest probability of being responsible for C 1 and C 2 product formations (C–C bond cleavage). Increasing the Sn coverage on the (100) surface facet to a PtSn/Pt(100) active site leads to a significantly reduced rate and might explain the experimentally observed higher selectivity of Sn-doped catalysts relative to pure Pt catalysts. Next, this study finds that for all surfaces, except PtSn/Pt(100), the rate-controlling steps are the initial dehydrogenation steps alongside some partially rate-controlling second dehydrogenation steps. For PtSn/Pt(100), only the initial terminal dehydrogenation step to CH 3 CH 2 CH 2 * and second dehydrogenation steps are rate-controlling. Next, the calibrated models for all surfaces were found to be selective toward propylene production and model the reported turnover frequency successfully. Nevertheless, Pt 2 Sn/Pt(211) emerges as the active site with some (minor) evidence as the main active site based on Jeffreys’ scale interpretation of Bayes factors. This observation agrees with prior studies that also found step sites to be most likely the most relevant active sites for pure Pt catalysts. Overall, the results indicate that tin, in addition to affecting the binding strength of the adsorbed species, prevents deeper dehydrogenation (reducing coking) and cracking reactions through increasing activation barriers for unwanted side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Controlled Crystalline Surface of Hydroxyapatite on Methane Oxidation Reactions

Hydroxyapatite (HAP, Ca 10 (PO 4 ) 6 (OH) 2 ) has a hexagonal prismatic structure that exposes two crystalline surfaces: prism-faceted a- and basal-faceted c-surfaces. Here, the predominant exposure of c-surface was controlled, and its influences in methane oxidation reactions (combustion and oxidative coupling over HAP and lead-substituted HAP (Pb-HAP), respectively) were studied. The c-surface exposure was realized by crystal orientation in HAP-based catalyst film, which was created by an electrochemical deposition of HAP seeds on a titanium substrate, followed by hydrothermal crystallization and peeling off of the crystalline films from the substrate. In comparison to a-surface that is prevalently exposed in unoriented HAP-based catalysts, the c-surface (i.e., (002) crystalline plane) of HAP-based catalysts exhibited up to 47-fold enhancement in areal rate in both reactions. The distinct catalytic activity between these two crystalline surfaces is attributed to the preferential formation of oxide ions and vacancies on c-surfaces. The oxide ions and vacancies in turns function as actives sites for promoting methane activation and complete oxidation into CO 2 . Density functional theory calculations confirmed the close relationship between different catalytic activities in c-surface of oriented and a-surface of unoriented HAP through the tendency of vacancy formation. Without the presence of vacancies, the methyl or methylene group after methane activation forms ethane or ethylene via coupling. The present study explored the effects of HAP crystal orientation in methane oxidation reactions, which revealed distinct catalytic behaviors of crystal surfaces in HAP-based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZnO As an Active and Selective Catalyst for Electrochemical Water Oxidation to Hydrogen Peroxide

Electrochemical synthesis of hydrogen peroxide (H 2 O 2 ) via two-electron water oxidation reaction (2e-WOR) is an ideal process for delocalized production for water cleaning and other applications. Previously observed water oxidation catalysts have limited activity and selectivity, imposing a bottleneck for broad adoption of this technology. We determine ZnO as a new stable, nontoxic, active, and selective catalyst for 2e-WOR to generate H 2 O 2 . Using density functional theory calculations, we propose that the (1010) facet of ZnO is an effective catalyst for 2e-WOR and confirm the prediction experimentally. We synthesize ZnO nanoparticles with a high fraction of (1010) facets and find that this catalyst gives an overpotential of 40 mV at 0.1 mA/cm 2 and peak Faradaic efficiency of 81% toward H 2 O 2 evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Atomic Surface Structure on the Activity of Ag for the Electrochemical Reduction of CO 2 to CO

This work was undertaken to elucidate the facet-dependent activity of Ag for the electrochemical reduction of CO 2 to CO. To this end, CO2 reduction was investigated over Ag thin films with (111), (100), and (110) orientations prepared via epitaxial growth on single-crystal Si wafers with the same crystallographic orientations. Thus, this preparation technique yielded larger area electrodes than can be achieved using single-crystals, which enabled the electrocatalytic activity of the corresponding Ag surfaces to be quantified in the Tafel regime. The Ag(110) thin films exhibited higher CO evolution activity compared to the Ag(111) and Ag(100) thin films, consistent with previous single-crystal studies. Density functional theory calculations suggest that CO 2 reduction to CO is strongly facet-dependent, and that steps are more active than highly coordinated terraces. This is the result of both a higher binding energy of the key intermediate COOH as well as an enhanced double-layer electric field stabilization over undercoordinated surface atoms located at step edge defects. As a consequence, step edge defects likely dominate the CO 2 reduction activity observed over the Ag(111) and Ag(100) thin films. The higher activity observed over the Ag(110) thin film is then related to the larger density of undercoordinated sites compared to the Ag(111) and Ag(100) thin films. Our conclusion that undercoordinated sites dominate the CO 2 reduction activity observed over close-packed surfaces highlights the need to consider the contribution of such defects in studies of single-crystal electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain-Induced Growth of Twisted Bilayers during the Coalescence of Monolayer MoS 2 Crystals

Tailoring the grain boundaries (GBs) and twist angles between two-dimensional (2D) crystals are two crucial synthetic challenges to deterministically enable envisioned applications such as moiré excitons, emerging magnetism, or single-photon emission. Here, we reveal how twisted 2D bilayers can be synthesized from the collision and coalescence of two growing monolayer MoS 2 crystals during chemical vapor deposition. The twisted bilayer (TB) moiré angles are found to preserve the misorientation angle (θ) of the colliding crystals. The shapes of the TB regions are rationalized by a kink propagation model that predicts the GB formed by the coalescing crystals. Optical spectroscopy measurements reveal a θ-dependent long-range strain in crystals with stitched grain boundaries and a sharp (θ > 20°) threshold for the appearance of TBs, which relieves this strain. Reactive molecular dynamics simulations explain this strain from the continued growth of the crystals during coalescence due to the insertion of atoms at unsaturated defects along the GB, a process that self-terminates when the defects become saturated. The simulations also reproduce atomic-resolution electron microscopy observations of faceting along the GB, which is shown to arise from the growth-induced long-range strain. These facets align with the axes of the colliding crystals to provide favorable nucleation sites for second-layer growth of a TB with twist angles that preserve the misorientation angle θ. This interplay between strain generation and aligned nucleation provides a synthetic pathway for the growth of TBs with deterministic angles.

2D materials↗

Understanding the Role of Solvation Forces on the Preferential Attachment of Nanoparticles in Liquid

Optimization of colloidal nanoparticle synthesis techniques requires an understanding of underlying particle growth mechanisms. Non-classical growth mechanisms are particularly important as they affect nanoparticle size and shape distributions which in turn influence functional properties. For example, preferential attachment of nanoparticles is known to lead to the formation of mesocrystals, although the formation mechanism is currently not well understood. Here we employ in situ liquid cell scanning transmission electron microscopy (STEM) and steered molecular dynamics (SMD) simulations to demonstrate that the experimentally observed preference for end-to-end attachment of silver nanorods is a result of weaker solvation forces occurring at rod ends. SMD reveals that when the side of a nanorod approaches another rod, perturbation in the surface bound water at the nanorod surface creates significant energy barriers to attachment. Additionally, rod morphology (i.e. facet shape) effects can explain the majority of the side attachment effects that are observed experimentally.

Environmental Molecular Sciences Laboratory↗

Ag@Au concave cuboctahedra: A unique probe for monitoring Au-catalyzed reduction and oxidation reactions by surface-enhanced Raman spectroscopy

In this paper, we report a facile synthesis of Ag@Au concave cuboctahedra by titrating aqueous HAuCl4 into a suspension of Ag cuboctahedra in the presence of ascorbic acid (AA), NaOH, and poly(vinylpyrrolidone) (PVP) at room temperature. Initially, the Au atoms derived from the reduction of Au 3+ by AA are conformally deposited on the entire surface of a Ag cuboctahedron. Upon the formation of a complete Au shell, however, the subsequently formed Au atoms are preferentially deposited onto the Au{100} facets, resulting in the formation of a Ag@Au cuboctahedron with concave structures at the sites of {111} facets. The concave cuboctahedra embrace excellent SERS activity that is more than 70-fold stronger than that of the original Ag cuboctahedra at an excitation wavelength of 785 nm. The concave cuboctahedra also exhibit remarkable stability in the presence of an oxidant such as H 2 O 2 because of the protection by a complete Au shell. These two unique attributes enable in-situ SERS monitoring of the reduction of 4-nitrothiophenol (4-NTP) to 4-aminothiophenol (4-ATP) by NaBH4 through a 4,4'-dimercaptoazobenzene ( trans -DMAB) intermediate and the subsequent oxidation of 4-ATP back to trans -DMAB upon the introduction of H 2 O 2 .

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cetyltrimethylammonium Bromide/Chloride on Gold Nanocrystals Can Be Directly Replaced with Tri-Citrate

This work demonstrates an effective method for directly exchanging the toxic cetyltrimethylammonium bromide/chloride (CTAB/C) on Au nanocrystals with tri-citrate. Our experimental and computational studies indicate that counterion plays a vital role in the exchange process. Specifically, when citrate species bind to Au surface, they all evolve into tri-citrate with different counterions. In the case of three H + counterions, tri-citrate could readily replace the CTAB/C due to a strong binding of the carboxylate group with the Au surface. The substitution of H + counterion by Na + or K + weakens the binding strength and thus compromises the exchange. Additionally, our quantitative measurements and theoretical calculations indicate that Au nanospheres encased by high-index facets are advantageous over their counterparts enclosed by {111} and/or {100} facets for the exchange owing to the difference in binding strength. The mechanistic insights and experimental control should be extendable to other combinations of surface ligands and metal nanocrystals.

adsorption↗

Dynamics and Removal Pathway of Edge Dislocations in Imperfectly Attached PbTe Nanocrystal Pairs: Toward Design Rules for Oriented Attachment

Using in situ high-resolution TEM, we study the structure and dynamics of well-defined edge dislocations in imperfectly attached PbTe nanocrystals. In this work, we identify that attachment of PbTe nanocrystals on both {100} and {110} facets gives rise to b = a/2⟨110⟩ edge dislocations. Based on the Burgers vector of individual dislocations, we can identify the glide plane of the dislocations. We observe that defects in particles attached on {100} facets have glide planes that quickly intersect the surface, and HRTEM movies show that the defects follow the glide plane to the surface. For {110} attached particles, the glide plane is collinear with the attachment direction, which does not provide an easy path for the dislocation to reach the surface. Indeed, HRTEM movies of dislocations for {110} attached particles show that defect removal is much slower. Further, we observe conversion from pure edge dislocations in imperfectly attached particles to dislocations with mixed edge and screw character, which has important implications for crystal growth. Lastly, we observe that dislocations initially closer to the surface have a higher speed of removal, consistent with the strong dislocation free surface attractive force. Our results provide important design rules for defect-free attachment of preformed nanocrystals into epitaxial assemblies.

36 MATERIALS SCIENCE↗

Atomic-Scale Structure and Stress Release Mechanism in Core–Shell Nanoparticles

According to the article, core–shell nanoparticles find applications in catalysts, sensors, and theranostics. The full internal 3D atomic structure, however, cannot be resolved by current imaging and diffraction techniques. We analyzed the atomic positions and stress-release mechanism in a cubic Au–Pd core–shell nanoparticle in approximately 1000 times higher resolution than current experimental techniques using large-scale molecular dynamics simulation to overcome these limitations. The core–shell nanocube of 73 nm size was modeled similarly to solution synthesis by random epitaxial deposition of a 4 nm thick shell of Pd atoms onto a Au core of 65 nm side length using reliable interatomic potentials. The internal structure reveals specific deformations and stress relaxation mechanisms that are caused by the +4.8% lattice mismatch of gold relative to palladium and differential confinement of extended particle facets, edges, and corners by one, two, or three Au–Pd interfaces, respectively. The three-dimensional lattice strain causes long-range, arc-like bending of atomic rows along the faces and edges of the particle, especially near the Au–Pd interface, a bulging deformation of the Pd shell, and stacking faults in the Pd shell at the corners of the particle. The strain pattern and mechanism of stress release were further characterized by profiles of the atomic layer spacing in the principal crystallographic directions. Accordingly, strain in the Pd shell is several times larger in the extended facets than near the edges and corners of the nanoparticle, which likely affects adsorption, optical, and electrochemical properties. The findings are consistent with available experimental data, including 3D reconstructions of the same cubic nanoparticle by coherent diffractive imaging (CDI) and may be verified by more powerful experimental techniques in the future. The stress release mechanisms are representative for cubic core–shell nanoparticles with fcc structure and can be explored for different shapes by the same methods.

Chemistry↗

Halide Anions as Shape-Directing Agents for Obtaining High-Quality Anisotropic Gold Nanostructures

The fundamental role of halide anions in the seed-mediated synthesis of anisotropic noble metal nanostructures has been a subject of debate within the nanomaterials community. Herein, we systematically investigate the roles of chloride, bromide and iodide anions in mediating the growth of anisotropic Au nanostructures. A high-purity surfactant solution of hexadecyltrimethylammonium bromide (CTABr) is used to reliably probe the role of each halide anion without interference from impurities. Our investigation reveals that bromide anions are required for the formation of Au nanorods, while the controlled combination of both bromide and iodide anions are necessary for the production of high-quality Au nanoprisms. Chloride anions, however, are ineffective at promoting anisotropic architectures and are detrimental to nanorod and/or nanoprism growth at high concentrations. We examine the seed structure and propose a growth model based on facet-selective adsorption on low-index Au facets to rationalize the nanostructures obtained by these methods. Our approach provides a facile synthesis of anisotropic Au nanostructures by way of a single growth solution and yields the desired morphologies with high purity. These results demonstrate that appropriate combinations of halide anions provide a versatile paradigm for manipulating the morphological distribution of Au nanostructures.

Environmental Molecular Sciences Laboratory↗

A general mechanism for stabilizing the small sizes of precious metal nanoparticles on oxide supports

We recently discovered that MgAl2O4 spinel {111} nano-facets optimally stabilize the small sizes of platinum nanoparticles even after severe high temperature aging treatments. Here we report the thermal stabilities of other precious metals with various physical and chemical properties on the MgAl2O4 spinel {111} facets, providing important new insights into the stabilization mechanisms. Besides Pt, Rh and Ir can also be successfully stabilized as small (1-3 nm) nanoparticles and even as single atomic species after extremely severe (800 °C, 1 week) oxidative aging. However, other metals either aggregate (Ru, Pd, Ag, and Au) or sublimate (Os) even during initial catalyst synthesis. On the basis of ab initio theoretical calculations and experimental observations, we rationalize that the exceptional stabilization originates from lattice matching, and the correspondingly strong attractive interactions at interfaces between the spinel {111} surface oxygens and epitaxial metals\metal oxides. On this basis, design principles for catalyst support oxide materials that are capable in stabilizing precious metals are proposed.

anti-sintering↗