Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Replacing a 252Cf source with a neutron generator in a shuffler - a conceptual design performed with MCNPX

The {sup 252}Cf shuffler has been widely used in nuclear safeguards and radioactive waste management to assay fissile isotopes, such as {sup 235}U or {sup 239}Pu, present in a variety of samples, ranging from small cans of uranium waste to metal samples weighing several kilograms. Like other non-destructive assay instruments, the shuffler uses an interrogating neutron source to induce fissions in the sample. Although shufflers with {sup 252}Cf sources have been reliably used for several decades, replacing this isotopic source with a neutron generator presents some distinct advantages. Neutron generators can be run in a continuous or pulsed mode, and may be turned off, eliminating the need for shielding and a shuffling mechanism in the shuffler. There is also essentially no dose to personnel during installation, and no reliance on the availability of {sup 252}Cf. Despite these advantages, the more energetic neutrons emitted from the neutron generator (141 MeV for D-T generators) present some challenges for certain material types. For example when the enrichment of a uranium sample is unknown, the fission of {sup 238}U is generally undesirable. Since measuring uranium is one of the main uses of a shuffler, reducing the delayed neutron contribution from {sup 238}U is desirable. Hence, the shuffler hardware must be modified to accommodate a moderator configuration near the source to tailor the interrogating spectrum in a manner which promotes sub-threshold fissions (below 1 MeV) but avoids the over-moderation of the interrogating neutrons so as to avoid self-shielding. In this study, where there are many material and geometry combinations, the Monte Carlo N-Particle eXtended (MCNPX) transport code was used to model, design, and optimize the moderator configuration within the shuffler geometry. The code is then used to evaluate and compare the assay performances of both the modified shuffler and the current {sup 252}Cf shuffler designs for different test samples. The matrix effect and the non-uniformity of the interrogating flux are investigated and quantified in each case. The modified geometry proposed by this study can serve s a guide in retrofitting shufflers that are already in use.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SCExAO/CHARIS Near-infrared Integral Field Spectroscopy of the HD 15115 Debris Disk

We present new, near-infrared (1.1–2.4 μm) high-contrast imaging of the debris disk around HD 15115 with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system coupled with the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS). The SCExAO/CHARIS resolves the disk down to ρ ∼ 0.″2 (r {sub proj} ∼ 10 au), a factor of ∼3–5 smaller than previous recent studies. We derive a disk position angle of PA ∼ 279.°4–280.°5 and an inclination of i ∼ 85.°3–86.2.°. While recent SPHERE/IRDIS imagery of the system could suggest a significantly misaligned two-ring disk geometry, CHARIS imagery does not reveal conclusive evidence for this hypothesis. Moreover, optimizing models of both one- and two-ring geometries using differential evolution, we find that a single ring having a Hong-like scattering phase function matches the data equally well within the CHARIS field of view (ρ ≲ 1″). The disk’s asymmetry, well evidenced at larger separations, is also recovered; the west side of the disk appears, on average, around 0.4 mag brighter across the CHARIS bandpass between 0.″25 and 1″. Comparing Space Telescope Imaging Spectrograph (STIS) 50CCD optical photometry (2000–10500 Å) with CHARIS near-infrared photometry, we find a red (STIS/50CCD−CHARIS broadband) color for both sides of the disk throughout the 0.″4–1″ region of overlap, in contrast to the blue color reported at similar wavelengths for regions exterior to ∼2″. Further, this color may suggest a smaller minimum grain size than previously estimated at larger separations. Finally, we provide constraints on planetary companions and discuss possible mechanisms for the observed inner disk flux asymmetry and color.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of the Differential Evolution Method to Solving Inverse Transport Problems

The differential evolution method, a powerful stochastic optimization algorithm that mimics the process of evolution in nature, is applied to inverse transport problems with several unknown parameters of mixed types, including interface location identification, source composition identification, and material mass density identification, in spherical and cylindrical radioactive source/shield systems. In spherical systems, measurements of leakages of discrete gamma-ray lines are assumed, while in cylindrical systems, measurements of scalar fluxes of discrete lines at points outside the system are assumed. The performance of the differential evolution algorithm is compared to the Levenberg-Marquardt method, a standard gradient-based technique, and the covariance matrix adaptation evolution strategy, another stochastic technique, on a variety of numerical test problems with several (i.e., three or more) unknown parameters. Numerical results indicate that differential evolution is the most adept method for finding the global optimum for these problems. In spherical geometry, differential evolution implemented serially is run-time competitive with gradient-based methods, while a parallel version of differential evolution would be run-time competitive with gradient-based techniques in cylindrical geometry. A hybrid differential evolution/Levenberg-Marquardt method is also introduced, and numerical results indicate that it can be a fast and robust optimizer for inverse transport problems.

99 GENERAL AND MISCELLANEOUS↗

Advanced Manufacturing for Nuclear Core Design

Advanced manufacturing technologies are fundamentally altering the way components are designed and manufactured. The potential application space for these technologies within the nuclear industry is broad, with the most benefit realized from the ability to approach the nuclear core design problem from an advanced manufacturing perspective. One of the objectives of the US Department of Energy Office of Nuclear Energy (DOE-NE) Transformational Challenge Reactor (TCR) design and analysis activities is to demonstrate this approach. A mitigation of conventional constraints realized through advanced manufacturing methods opens up the design space, enabling a departure from typical axially uniform pin- and plate-type geometries common to operating nuclear reactors worldwide. The ability to use more heterogenous spatial and material flexibilities increases the demand on the predictability of higher fidelity modeling and simulation tools to be used in the design, analysis, and optimization processes. Leading candidate advanced manufacturing technologies for nuclear applications are additive methods that provide for high dimensional control and incorporation of small design features such as powder bed fusion, laser directed energy deposition, and binder jetting. Potential applications to core design identified during DOE-NE TCR design and analysis activities fall into two categories: those that are uniquely enabled by additive manufacturing technologies and those that are enabled by the characteristics (e.g., repeatability and instrumentation) inherent to these technologies. Identified applications include reducing in-core parasitic materials, improving heat conduction across fuel-cladding gaps, optimizing thermal hydraulic design with flexible coolant flow geometries, reducing uncertainties in manufactured components, optimizing core conditions with design heterogeneities, designing feedback mechanisms using material characteristics, and embedding burnable poisons. These potential applications join a host of nuclear industry advanced manufacturing activities to recapture manufacturing capabilities, reduce manufacturing costs and complexities, reduce deployment time, and enable performance and operational enhancements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An adjoint method for a high-order discretization of deforming domain conservation laws for optimization of flow problems

We report the fully discrete adjoint equations and the corresponding adjoint method are derived for a globally high-order accurate discretization of conservation laws on parametrized, deforming domains. The conservation law on the deforming domain is transformed into one on a fixed reference domain by the introduction of a time-dependent mapping that encapsulates the domain deformation and parametrization, resulting in an Arbitrary Lagrangian–Eulerian form of the governing equations. A high-order discontinuous Galerkin method is used to discretize the transformed equation in space and a high-order diagonally implicit Runge–Kutta scheme is used for the temporal discretization. Quantities of interest that take the form of space–time integrals are discretized in a solver-consistent manner. The corresponding fully discrete adjoint method is used to compute exact gradients of quantities of interest along the manifold of solutions of the fully discrete conservation law. These quantities of interest and their gradients are used in the context of gradient-based PDE-constrained optimization. The adjoint method is used to solve two optimal shape and control problems governed by the isentropic, compressible Navier–Stokes equations. The first optimization problem seeks the energetically optimal trajectory of a 2D airfoil given a required initial and final spatial position. The optimization solver, driven by gradients computed via the adjoint method, reduced the total energy required to complete the specified mission nearly an order of magnitude. The second optimization problem seeks the energetically optimal flapping motion and time-morphed geometry of a 2D airfoil given an equality constraint on the x-directed impulse generated on the airfoil. The optimization solver satisfied the impulse constraint to greater than 8 digits of accuracy and reduced the required energy between a factor of 2 and 10, depending on the value of the impulse constraint, as compared to the nominal configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface profile optimization for planar stress wave attenuation in bi-layered plates

Stress waves scatter upon entering a new medium. This occurs due to the reflection and transmission of the waves, which depends on the impedance mismatch between the two materials and the angle of incidence. For a bi-layered structure with finite dimensions and constant impedance ratio, the scattering and intensity of the stress waves may be varied by changing the interface profile between the two layers. In this study, a methodology is proposed for optimizing the interface profile between the layers of a finite bi-layered plate for the objective of planar stress wave attenuation. The bi-layered plates are subjected at one end to highly impulsive loadings with various durations, and the geometry of the internal interface is optimized for the purpose of minimizing the amplitude of the maximum reaction force at the opposite fixed end. The optimization methodology is based on a genetic algorithm, which is coupled with a finite element method for analyzing the wave propagation behavior of the plates. Finally, it is observed that the interface profile and the amount of stress wave attenuation depend on the duration of the applied impulsive loading, with higher amounts of attenuation obtained when the wavelength associated with the impulsive load is small compared to the dimensions of the bi-layered plates.

36 MATERIALS SCIENCE↗

Spark plasma sintering of structure-tailored ultrahigh-temperature components: First step to complex net shaping

The net-shaping capability in spark plasma sintering (SPS) of ultrahigh-temperature ceramics has been explored in this study. The annular or ring-like shape is considered here as the first step to a more complex geometry compared to a solid cylinder or disk. ZrC powders have been SPS processed in specially designed graphite tooling to achieve the annular shape geometry. Experimental runs have been carried out to determine the optimal processing parameters for producing highly dense ZrC specimens in this geometry. Finite-element modeling framework has been constructed to determine the internal stress evolution, as well as densification, during the SPS of the annular-shaped ZrC. The formulated processing schemes for ZrC have been adapted to process SiC/ZrB2 composite powder with the purpose of making tooling components for SPS applications. The applicability of the obtained composite SPS tooling has been evaluated at high temperature and high pressure associated with SPS regimes.

36 MATERIALS SCIENCE↗

Sample problems for Section III, Division 5 design by inelastic analysis of Grade 91 components

This report works through two sample design analyses of representative Grade 91 components using the ASME Boiler & Pressure Vessel Code Section III, Division 5, Appendix HBB-T rules for the strain and deformation and creep-fatigue design criteria using a design by inelastic analysis approach. The component geometries and loadings were selected to span a wide variety of potential applications. The sample components are an endplate geometry, which is fairly representative of typical pressure vessel construction, and a core block, representing a critical component in a heat pipe microreactor, which has a complicated geometry and complex thermal stress history. These sample problems serve several functions. First, they are complete worked examples of how to apply the current design by inelastic analysis rules. Second, they serve as test cases to evaluate the current rules and provide feedback on how they could be optimized to deal with complicated component geometries or to be better automated in modern finite element analysis software. Finally, the analysis here uses an inelastic constitutive model for Grade 91 developed by Argonne National Laboratory and proposed for inclusion in the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules as a reference constitutive model. Using this constitutive model in the sample problem analyses tests the model in the context of the ASME Code rules. The final conclusions of this report are that the material model and the current Code rules are satisfactory, but that the Code rules could be optimized to simplify automation and reduce over conservatism. Future work should address the specific optimization topics discussed in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Physics basis for design of 3D coils in tokamaks

Recent progress in 3D tokamak modeling is now leveraged to create a conceptual design of new external 3D field coils for the DIII-D tokamak. In this work generalized perturbed equilibrium code is used to determine optimally efficient spectrum for driving total, core, and edge neoclassical toroidal viscosity torque. These fundamental modes of 3D control are shown to have consistent outboard structures across a wide variety of plasma scenarios and machines. Given these target spectra, the currents and 3D geometry of multiple coils can be optimized to increase efficient drive for the physics of interest without undesired secondary effects. Here, this nonlinear optimization is demonstrated using the flexible optimized coils using space-curves code. The optimized coils are individually distorted in space, creating toroidal 'arrays' containing a variety of shapes that often wrap around a significant poloidal extent of the machine. Importantly, efficient coupling can be maintained even when enforcing large distances between coils and the plasma during the geometric optimization of coil designs. Finally, the physics-driven optimization presented here thus provides a practical path to utilizing coils built on the exterior of the vacuum chamber in future reactors to obtain the powerful 3D field benefits demonstrated on current machines with close, internal coils.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TU-C-17A-12: Towards a Passively Optimized Phase-Space Monte Carlo (POPMC) Treatment Planning Method: A Proof of Principle

Purpose: The advent of on-line/off-line adaptive, and biologically-conformal radiation therapy has led to a need for treatment planning solutions that utilize voxel-specific penalties, requiring optimization over a large solution space that is performed quickly, and the dose in each voxel calculated accurately. This work proposes a “passive” optimization framework, which is executed concurrently during Monte Carlo dose calculation, evaluating the cost/benefit of each history during transport, and creates a passively optimized fluence map. Methods: The Monte Carlo code Geant4 v9.6 was used for this study. The standard voxel geometry implementation was modified to support the passive optimization framework, with voxel-specific optimization parameters. Dose-benefit functions, which will increase a particle history’s weight upon dose deposition, were defined in a central collection of voxels to effectively create target structures. Histories that deposit energy to voxels are reweighted based on a voxel’s dose multiplied by its cost/benefit value. Upon full termination of each history, the dose contributions of that history are reweighted to reflect a contribution proportional to the history’s final weight. A parallel-planar 1.25 MeV photon fluence is transported through the geometry, and re-weighted at each dose deposition step. The resulting weight is tallied with the incident spatial and directional coordinates in a phase-space distribution. Results: A uniform incident fluence was reweighted during MC dose calculations to create an optimized fluence map which would generate dose profiles in target volumes that exhibit the same dose characteristics as the prescribed optimization parameters. An optimized dose profile, calculated concurrently with the phase-space, reflects the resulting dose distribution. Conclusion: This study demonstrated the feasibility of passively optimizing an incident fluence map during Monte Carlo dose calculations. The flexibility of the voxel-specific optimization framework allows a variety and combination of optimization parameters to be calculated for each voxel at every transportation step. This work is partially supported by Varian. This work is partially supported by the NIH.

07 ISOTOPE AND RADIATION SOURCES↗

Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review

Abstract Phase change materials (PCMs) can enhance the performance of energy systems by time shifting or reducing peak thermal loads. The effectiveness of a PCM is defined by its energy and power density—the total available storage capacity (kWh m −3 ) and how fast it can be accessed (kW m −3 ). These are influenced by both material properties as well as geometry of the energy systems; however, prior efforts have primarily focused on improving material properties, namely, maximizing latent heat of fusion and increasing thermal conductivity. The latter is often at the expense of the former. Advanced manufacturing techniques hold tremendous potential to enable co‐optimization of material properties and device geometry, while potentially reducing material waste and manufacturing time. There is an emerging body of research focused on additive manufacturing of PCM composites and devices for thermal energy storage (TES) and thermal management. In this article, the fundamentals and applications of PCMs are reviewed and recent additive manufacturing advances in latent heat TES for both the PCM composite and associated heat exchanger are discussed. A forward‐looking perspective on the future and potential of PCM additive manufacturing for TES and thermal management is provided.

25 ENERGY STORAGE↗

A Comparative Study for Optimization of Sensitivity and Noise Levels in Race-Track Sensors

In this study, we have designed fluxgate sensors at race-track geometry which were used to measure DC or low-frequency magnetic fields. The type of core material and the number of core layers on the sensitivity and the noise level were specifically examined. We could achieve to get a sensitivity of 440 kV/T and a noise level of 56 pT/ √Hz at 1 Hz in a large dynamical range extending up to 1.5 Oe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

OPTIMIZING A PORTABLE MICROWAVE INTERFERENCE SCANNING SYSTEM FOR NONDESTRUCTIVE TESTING OF MULTI-LAYERED DIELECTRIC MATERIALS

The projected microwave energy pattern, wave guide geometry, positioning methods and process variables have been optimized for use of a portable, non-contact, lap-top computer-controlled microwave interference scanning system on multi-layered dielectric materials. The system can be used in situ with one-sided access and has demonstrated capability of damage detection on composite ceramic armor. Specimens used for validation included specially fabricated surrogates, and ballistic impact-damaged specimens. Microwave data results were corroborated with high resolution direct-digital x-ray imaging. Microwave interference scanning detects cracks, laminar features and material properties variations. This paper presents the details of the system, the optimization steps and discusses results obtained.

36 MATERIALS SCIENCE↗

Geometrical optimization of a local ballistic magnetic sensor

We have developed a highly sensitive local magnetic sensor by using a ballistic transport property in a two-dimensional conductor. A semiclassical simulation reveals that the sensitivity increases when the geometry of the sensor and the spatial distribution of the local field are optimized. We have also experimentally demonstrated a clear observation of a magnetization process in a permalloy dot whose size is much smaller than the size of an optimized ballistic magnetic sensor fabricated from a GaAs/AlGaAs two-dimensional electron gas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Artificial Intelligence Design of Nuclear Systems

Advanced manufacturing applications in the nuclear industry have the potential to revolutionize nuclear design. While current engineering design objectives may be consistent with objectives from the past, such as those intended to minimize the fuel cost or to limit the maximum fuel temperature for a given power level, the possible geometries which can be considered as candidate designs have changed. Optimizations applied to current designs in nuclear engineering are limited by traditional geometric shapes that are easy to manufacture with traditional processes: slabs as fuel plates, cylinders as fuel rods, spheres as fuel pebbles, axis-aligned coolant channels, and more. Advanced manufacturing allows for an approach to the nuclear design problem with arbitrary geometries that can enable previously unrealized optimizations in performance and cost. This work explores the application of arbitrary geometry to the nuclear engineering design process.

42 ENGINEERING↗

Polarized CMB power spectrum estimation using the pure pseudo-cross-spectrum approach

We extend the pure pseudo-power-spectrum formalism proposed recently in the context of the cosmic microwave background polarized power spectra estimation by Smith (2006) to incorporate cross-spectra computed for multiple maps of the same sky area. We present an implementation of such a technique, paying particular attention to a calculation of the relevant window functions and mixing (mode-coupling) matrices. We discuss the relevance and treatment of the residual E/B leakage for a number of considered sky apodizations as well as compromises and assumptions involved in an optimization of the resulting power spectrum uncertainty. In particular, we investigate the importance of a pixelization scheme, patch geometry, and sky signal priors used in apodization optimization procedures. In addition, we also present results derived for more realistic sky scans as motivated by the proposed balloon-borne experiment EBEX. We conclude that the presented formalism, thanks to its speed and efficiency, can provide an interesting alternative to the CMB polarized power spectra estimators based on the optimal methods at least on angular scales smaller than {approx}10 deg. In this regime, we find that it is capable of suppressing the total variance of the estimated B-mode spectrum to within a factor of {approx}2 of the variance due to only the sampling and noise uncertainty of the B modes alone, as derived from the Fisher matrix approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional magnetic optimization of accelerator magnets using an analytic strip model

The end design is a critical step in the design of superconducting accelerator magnets. First, the strain energy of the conductors must be minimized, which can be achieved using differential geometry. The end design also requires an optimization of the magnetic field homogeneity. A mechanical and magnetic model for the conductors, using developable strips, is described in this paper. This model can be applied to superconducting Rutherford cables, and it is particularly suitable for High Temperature Superconducting tapes. The great advantage of this approach is analytic simplifications in the field computation, allowing for very fast and accurate computations, which save a considerable computational time during the optimization process. Some 3D designs for dipoles are finally proposed, and it is shown that the harmonic integrals can be easily optimized using this model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗