Search NASA⌕ Search

SEARCH · Search NASA

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

High-Temperature Inorganic Self-Healing Inorganic Cement Composites

The data files below summarize the results from various experiments testing properties of high-temperature self-healing inorganic cement composites. These properties include cement-carbon steel bond strength, Young's modulus recovery, matrix recovery strength, and compressive strength and Yonug's modulus for cement composites modified with Pozzolanic Clay additives.

15 GEOTHERMAL ENERGY↗

Mechanical characterization of Lipon films using nanoindentation

Nanoindentation has been used to characterize the elastic modulus and hardness of LiPON films ranging in thickness from 1 to 10 m. Four fully dense, amorphous films were deposited on glass and sapphire substrates with one film annealed at 200 C for 20 min. The modulus of LiPON is found to be approximately 77 GPa, and argued to be independent of the substrate type, film thickness, and annealing. Based on the numerical analysis of Monroe and Newman, this value may be sufficiently high to mechanically suppress dendrite formation at the lithium/LiPON interface in thin film batteries [1]. Using Sneddon's stiffness equation and assuming the modulus is 77 GPa, the hardness is found to be approximately 3.9 GPa for all but the annealed film. The hardness of the annealed film is approximately 5% higher, at 4.1 GPa. Atomic force microscopy images of the residual hardness impressions confirm the unexpected increase in hardness of the annealed film. Surprisingly, the indentation data also reveal time-dependent behavior in all four films. This indicates that creep may also play a significant role in determining how LiPON responds to complex loading conditions and could be important in relieving stresses as they develop during service.

36 MATERIALS SCIENCE↗

Thermal Equation of State of CaIrO3 Post-perovskite

The pressure-volume-temperature (P-V-T) relation of CaIrO{sub 3} post-perovskite (ppv) was measured at pressures and temperatures up to 8.6 GPa and 1,273 K, respectively, with energy-dispersive synchrotron X-ray diffraction using a DIA-type, cubic-anvil apparatus (SAM85). Unit-cell dimensions were derived from the Le Bail full profile refinement technique, and the results were fitted using the third-order Birth-Murnaghan equation of state. The derived bulk modulus K{sub T0} at ambient pressure and temperature is 168.3 {+-} 7.1 GPa with a pressure derivative K{sub T0} = 5.4 {+-} 0.7. All of the high temperature data, combined with previous experimental data, are fitted using the high-temperature Birch-Murnaghan equation of state, the thermal pressure approach, and the Mie-Grueneisen-Debye formalism. The refined thermoelastic parameters for CaIrO{sub 3} ppv are: temperature derivative of bulk modulus ({partial_derivative}K{sub T}/{partial_derivative}T){sub P} = -0.038 {+-} 0.011 GPa K{sup -1}, {alpha}K{sub T} = 0.0039 {+-} 0.0001 GPa K{sup -1}, ({partial_derivative}K{sub T}/{partial_derivative}T){sub V} = -0.012 {+-} 0.002 GPa K{sup -1}, and ({partial_derivative}{sup 2}P/{partial_derivative}T{sup 2}){sub V} = 1.9 {+-} 0.3 x 10{sup -6} GPa{sup 2} K{sup -2}. Using the Mie-Grueneisen-Debye formalism, we obtain Grueneisen parameter {gamma}{sub 0} = 0.92 {+-} 0.01 and its volume dependence q = 3.4 {+-} 0.6. The systematic variation of bulk moduli for several oxide post-perovskites can be described approximately by the relationship K{sub T0} = 5406.0/V(molar) + 5.9 GPa.

58 GEOSCIENCES↗

Ultrastiff, Strong, and Highly Thermally Conductive Crystalline Graphitic Films with Mixed Stacking Order

A macroscopic film (2.5 cm × 2.5 cm) made by layer-by-layer assembly of 100 single-layer polycrystalline graphene films is reported. The graphene layers are transferred and stacked one by one using a wet process that leads to layer defects and interstitial contamination. Heat-treatment of the sample up to 2800 °C results in the removal of interstitial contaminants and the healing of graphene layer defects. The resulting stacked graphene sample is a freestanding film with near-perfect in-plane crystallinity but a mixed stacking order through the thickness, which separates it from all existing carbon materials. Macroscale tensile tests yields maximum values of 62 GPa for the Young's modulus and 0.70 GPa for the fracture strength, significantly higher than has been reported for any other macroscale carbon films; microscale tensile tests yield maximum values of 290 GPa for the Young's modulus and 5.8 GPa for the fracture strength. The measured in-plane thermal conductivity is exceptionally high, 2292 ± 159 W m -1 K -1 while in-plane electrical conductivity is 2.2 × 10 5 S m -1 . Finally, the high performance of these films is attributed to the combination of the high in-plane crystalline order and unique stacking configuration through the thickness.

36 MATERIALS SCIENCE↗

Low-temperature proton irradiation damage of isotropic nuclear grade IG-430 graphite

IG-430, a fine-grained, isotropic graphite grade is a promising candidate for the future Very High Temperature Reactors (VHTR). IG-430 which provides higher density, strength, and thermal conductivity, has already been developed as a graphite for next-generation HTGR, and is expected to be employed. This graphite grade, however, is lacking enough database that is needed for design. The present study aims to enhance the database with experimental data focusing on the low temperature regime (90–210 °C) by using 120–200 MeV protons to irradiate the IG-430 graphite to peak fluence of ~1.2 10 25 m –2 . It is anticipated that radiation-induced changes in the graphite properties and damage to be more pronounced in this low temperature regime than in elevated temperatures where damage annealing is taking place simultaneously. IG-430 graphite was characterized following irradiation for mechanical property changes (modulus and strength), dimensional stability and irradiation-induced growth as well as microstructural changes using high energy X-rays and different X-ray diffraction techniques. In assessing proton irradiation effects on the IG-430 graphite grade, comparison of radiation effects was made with the IG-43 grade, the un-purified version of IG-430, as well as other isotropic graphite grades. IG-430 was shown in this study to be better graphitized than other isotropic graphite grades. The study also revealed that during proton irradiation at low temperatures (~100 °C) the IG-430 exhibits stored energy release.

36 MATERIALS SCIENCE↗

TYPE Ia SUPERNOVA DISTANCE MODULUS BIAS AND DISPERSION FROM K-CORRECTION ERRORS: A DIRECT MEASUREMENT USING LIGHT CURVE FITS TO OBSERVED SPECTRAL TIME SERIES

We estimate systematic errors due to K-corrections in standard photometric analyses of high-redshift Type Ia supernovae. Errors due to K-correction occur when the spectral template model underlying the light curve fitter poorly represents the actual supernova spectral energy distribution, meaning that the distance modulus cannot be recovered accurately. In order to quantify this effect, synthetic photometry is performed on artificially redshifted spectrophotometric data from 119 low-redshift supernovae from the Nearby Supernova Factory, and the resulting light curves are fit with a conventional light curve fitter. We measure the variation in the standardized magnitude that would be fit for a given supernova if located at a range of redshifts and observed with various filter sets corresponding to current and future supernova surveys. We find significant variation in the measurements of the same supernovae placed at different redshifts regardless of filters used, which causes dispersion greater than ∼0.05 mag for measurements of photometry using the Sloan-like filters and a bias that corresponds to a 0.03 shift in w when applied to an outside data set. To test the result of a shift in supernova population or environment at higher redshifts, we repeat our calculations with the addition of a reweighting of the supernovae as a function of redshift and find that this strongly affects the results and would have repercussions for cosmology. We discuss possible methods to reduce the contribution of the K-correction bias and uncertainty.

79 ASTRONOMY AND ASTROPHYSICS↗

Spinel and post-spinel phase assemblages in Zn 2 TiO 4 : an experimental and theoretical study

Zn2TiO4 spinel (Zn2TiO4-Sp) was synthesized by a solid-state reaction method (1573 K, room P and 72 h) and quasi-hydrostatically compressed to ~24 GPa using a DAC coupled with a synchrotron X-ray radiation (ambient T). We found that the Zn2TiO4-Sp was stable up to ~21 GPa and transformed to another phase at higher P. With some theoretical simulations, we revealed that this high-P phase adopted the CaTi2O4-type structure (Zn2TiO4-CT). Additionally, the isothermal bulk modulus (KT) of the Zn2TiO4-Sp was experimentally obtained as 156.0(44) GPa and theoretically obtained as 159.1(4) GPa, with its first pressure derivative K'TKT' as 3.8(6) and 4.37(4), respectively. The volumetric and axial isothermal bulk moduli of the Zn2TiO4-CT were theoretically obtained as KT = 150(2) GPa (K'TKT' = 5.4(2); for the volume), KT-a = 173(2) GPa (K'T-aKT-a' = 3.9(1); for the a-axis), KT-b = 74(2) GPa (K'T-bKT-b' = 7.0(2); for the b-axis), and KT-c = 365(8) GPa (K'T-cKT-c' = 1.5(4); for the c-axis), indicating a strong elastic anisotropy. The Zn2TiO4-CT was found as ~10.0 % denser than the Zn2TiO4-Sp at ambient conditions. The spinel and post-spinel phase assemblages for the Zn2TiO4 composition at high T have been deduced as Zn2TiO4-Sp, ZnTiO3-ilmenite + ZnO-wurtzite, ZnTiO3-ilmenite + ZnO-rock salt, ZnTiO3-perovskite + ZnO-rock salt, and Zn2TiO4-CT as P increases, which presumably implies a potential stability field for a CT-type Mg2SiO4 at very high P.

36 MATERIALS SCIENCE↗

Organic/Inorganic Hybrid Polymer/Clay Nanocomposites

A novel class of polymer/clay nanocomposites has been invented in an attempt to develop transparent, lightweight, durable materials for a variety of aerospace applications. As their name suggests, polymer/ clay nanocomposites comprise organic/ inorganic hybrid polymer matrices containing platelet-shaped clay particles that have sizes of the order of a few nanometers thick and several hundred nanometers long. Partly because of their high aspect ratios and high surface areas, the clay particles, if properly dispersed in the polymer matrix at a loading level of 1 to 5 weight percent, impart unique combinations of physical and chemical properties that make these nanocomposites attractive for making films and coatings for a variety of industrial applications. Relative to the unmodified polymer, the polymer/ clay nanocomposites may exhibit improvements in strength, modulus, and toughness; tear, radiation, and fire resistance; and lower thermal expansion and permeability to gases while retaining a high degree of optical transparency.

Park, Cheol↗

Does the Al substitution in C-S-H(I) change its mechanical property?

This study examines the influence of Al substitution for Si on the bulk modulus of calcium silicate hydrate I [C-S-H(I)], a structural analogue of C-S-H, by performing high-pressure synchrotron X-ray diffraction experiments in two C-S-H(I) samples: one a hydration product of alkali-activated slag and the other a synthetic C-S-H(I). The test result shows that not only the bulk modulus but also the incompressibility of the lattice parameters a, b, and c of two C-S-H(I) samples are very similar to each other, regardless of the Al substitution. This result may be due to the four-coordinated configuration of the substituted Al, which makes the dreierketten silicate chains maintain the same arrangement after the substitution.

36 MATERIALS SCIENCE↗

Nonlinear Resonant Ultrasound Spectroscopy for Predicting Sensitivity to Initiation in Granular High Explosives

Abstract Nonlinear Resonant Ultrasound Spectroscopy (NRUS) is a technique that can measure bulk nonlinear coefficients of the nonlinear elastic modulus for a material. NRUS has been used to identify damage in a variety of granular materials including rocks and concrete. Some energetic materials, such as Pentaerythritol Tetranitrate (PETN), are commonly fielded as pressed granular compacts. It is well known that the sensitivity to initiation of these materials is heavily dependent on their microstructure, and that microstructure changes naturally (becomes damaged) over time. In this study, we examine the use of NRUS to identify changes in microstructure between pristine and thermally aged PETN pellets. In particular, we examine the relationship between the bulk hysteretic nonlinearity, α , of the pellets and time spent at temperature, powder specific surface area (SSA), and sensitivity to initiation. We find that, in general, α does not increase uniformly for all pellets within a single thermal aging condition. However, when the pellets are test fired to determine sensitivity to initiation, there is a strong correlation between α and firing voltage threshold. NRUS‐measured α has the added benefit that the measurements can be made in situ and on benchtop scales.

Schulze, Peter↗

Origin of giant permittivity and high-temperature dielectric anomaly behavior in Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics

Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics prepared by the conventional solid-state reaction method under various sintering conditions were found to exhibit a giant dielectric constant over 10 000 around room temperature. Two electrical responses were observed in the combined modulus and impedance plots, indicating the presence of Maxwell-Wagner relaxation. The contributions of semiconducting grains and insulating grain boundaries (corresponding to high-frequency and low-frequency electrical response, respectively) played important roles in the dielectric properties of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. The correlations between grain boundaries resistance and low frequency dielectric loss, grains resistance and the position of dielectric loss peak were addressed. Mixed-valent structures of Cu{sup 2+}/Cu{sup 3+} and Ti{sup 3+}/Ti{sup 4+} had been determined using X-ray photoelectron spectroscopy. Electron hopping between Cu{sup 2+} and Cu{sup 3+} and electron transport in Ti{sup 3+}-O-Ti{sup 4+} paths were proposed as the origin of the semiconducting nature of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. In particular, high-temperature dielectric anomaly behavior was investigated in detail. A dielectric peak exhibiting relaxor-like behavior was observed around 200 Degree-Sign C, which was linked with the formation of oxygen vacancies. Based on the electric modulus results, this behavior was explored in the light of the defect formation and explained in terms of a competition process depending on the combinational contribution to polarization between n- and p-type carriers rather than a relaxation process.

36 MATERIALS SCIENCE↗

Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

The equiatomic high-entropy alloy (HEA), CrMnFeCoNi, has recently been shown to be microstructurally unstable, resulting in a multi-phase microstructure after intermediate-temperature annealing treatments. The decomposition occurs rapidly in the nanocrystalline (NC) state and after longer annealing times in coarse-grained states. To characterize the mechanical properties of differently annealed NC states containing multiple phases, nanoindentation was used in this paper. The results revealed besides drastic changes in hardness, also for the first time significant changes in the Young's modulus and strain rate sensitivity. Finally, nanoindentation of NC HEAs is, therefore, a useful complementary screening tool with high potential as a high throughput approach to detect phase decomposition, which can also be used to qualitatively predict the long-term stability of single-phase HEAs.

36 MATERIALS SCIENCE↗

Stabilization of Preternatural Barium Oxidation States as an Unexpected Byproduct of β-Decay: Discovery of a New Halide Semiconductor Alloy

137 Cs has a wide range of roles in the nuclear industry. The solid material, safely encapsulated in CsCl as 137 CsCl, is stored as fission product waste from nuclear power production and legacy waste from nuclear weapons production; it has also served as a radiation source in food and sewage irradiators as well as medical devices. However, because of the solubility of the chloride salt and the relatively high specific activity of 137 Cs, damaged or broken capsules can lead to severe radiological accidents. Safe capsule design and material recycling are complicated by the unclear structural evolution during β-decay, which remains ambiguous due to the differing oxidation states of Cs (1+) and Ba (2+). Here, in this study, we use first-principles calculations to investigate the evolving structure–property relationships of Cs 1–x Ba x Cl during β-decay. Despite the well-established 2+ formal oxidation state of alkali-earth metals, we find that Ba 1+ can be stabilized in the form of a mixed-valence alloy at low concentrations. Specifically, we identify three regimes for the β-decay of 137 Cs into CsCl: Ba-doped CsCl (Ba ≤ 14%), wherein Ba has the expected 2+ oxidation state; Cs–Ba–Cl alloys, where Ba has a mix of the usual Ba 2+ and highly unusual Ba 1+ oxidation state in the form of a quasi-disordered mixed-valence alloy (Ba = 25%); and phase separation into a CsCl + BaCl 2 + Ba (m) mechanical mixture, where Ba reverts to its expected 2+ oxidation state (Ba > 25%). Surprisingly, the Cs 0.75 Ba 0.25 Cl mixed-valence alloy is a narrow indirect band gap semiconductor (1.05 eV) despite the insulating nature of both CsCl and BaCl 2 . It also exhibits strongly excitonic polarized optical properties, has glass-like ultralow thermal conductivity (directional average of 0.21 W/mK at 300 K), and shows greater resistance to deformation under both tensile and volumetric strengths compared with the original CsCl structure (e.g., shear and Young’s modulus of 9.04 and 31.62 GPa, respectively). These findings imply that transmutation of 137 Cs leads to highly unusual chemical bonding that stabilizes Ba 1+ in local regions of the quasi-disordered Cs 0.25 Ba 0.75 Cl, resulting in anomalous physical properties. Moreover, this discovery provides valuable insight for safe nuclear waste capsule design, which can aid in preventing environmental or human exposure to radioactive materials.

Fuhr, Addis S. [Oak Ridge National Laboratory (ORN↗

Polyamorphism in Yb-based metallic glass induced by pressure

The Yb 62.5 Zn 15 Mg 17.5 Cu 5 metallic glass is investigated using synchrotron x-ray total scattering method up to 38.4 GPa. The polyamorphic transformation from low density to high density with a transition region between 14.1 and 25.2 GPa is observed, accompanying with a volume collapse reflected by a discontinuousness of isothermal bulk modulus. This collapse is caused by that distortional icosahedron short range order precedes to perfect icosahedron, which might link to Yb 4f electron delocalization upon compression, and match the result of in situ electrical resistance measurement under high pressure conditions. Furthermore, this discovery in Yb-based metallic glass, combined with the previous reports on other metallic glass systems, demonstrates that pressure induced polyamorphism is the general behavior for typical lanthanide based metallic glasses.

36 MATERIALS SCIENCE↗

Pressure induced magnetic phase transition in RhFe{sub 3}N and IrFe{sub 3}N: An ab-initio study

The structural, electronic, elastic and magnetic properties of RhFe{sub 3}N and IrFe{sub 3}N are investigated using ab-initio calculations based on density functional theory as implemented in VASP code within the gradient generalized approximation. The non-spin polarized and spin polarized calculations are performed for these nitrides at normal and high pressures. It is found that these ternary nitrides are stable in ferromagnetic state at normal pressure. The lattice constant and bulk modulus values are calculated. The electronic structure reveals that these nitrides are metallic at normal pressure. The calculated elastic constants indicate that they are mechanically stable at ambient pressure. Ferromagnetic to nonmagnetic phase transition is observed in RhFe{sub 3}N and IrFe{sub 3}N at high pressure. Ferromagnetism is quenched in these nitrides at high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-stage spin transition of iron in FeAl-bearing phase D at lower mantle

Hydrous magnesium silicate phase D plays a key role in the transport of water from the upper to the lower mantle via subducted slabs. Here we report pressure dependence hyperfine and lattice parameters of FeAl-bearing phase D up to megabar pressures using synchrotron nuclear forward scattering and X-ray diffraction in a diamond anvil cell at room temperature. We report FeAl-bearing phase D undergoes a two-stage high-spin to low-spin transition of iron for Fe 2+ at 37–41 GPa and for Fe 3+ at 64–68 GPa. These transitions are accompanied by an increase in density and a significant softening in the bulk modulus and bulk velocity at their respective pressure range. The occurrence of the dense low-spin FeAl-bearing phase D with relatively high velocity anisotropies in deep-subducted slabs can potentially contribute to small-scale seismic heterogeneities in the middle-lower mantle beneath the circum-Pacific area.

58 GEOSCIENCES↗

Shape-Preserved Transformation of Biological Cells into Synthetic Hydrogel Microparticles

The synthesis of materials that can mimic the mechanical, and ultimately functional, properties of biological cells can broadly impact the development of biomimetic materials, as well as engineered tissues and therapeutics. Yet, it is challenging to synthesize, for example, microparticles that share both the anisotropic shapes and the elastic properties of living cells. Here in paper, a cell-directed route to replicate cellular structures into synthetic hydrogels such as polyethylene glycol (PEG) is described. First, the internal and external surfaces of chemically fixed cells are replicated in a conformal layer of silica using a sol–gel process. The template is subsequently removed to render shape-preserved, mesoporous silica replicas. Infiltration and cross-linking of PEG precursors and dissolution of the silica result in a soft hydrogel replica of the cellular template as demonstrated using erythrocytes, HeLa, and neuronal cultured cells. The elastic modulus can be tuned over an order of magnitude (≈10–100 kPa) though with a high degree of variability. Furthermore, synthesis without removing the biotemplate results in stimuli-responsive particles that swell/deswell in response to environmental cues. Overall, this work provides a foundation to develop soft particles with nearly limitless architectural complexity derived from dynamic biological templates.

59 BASIC BIOLOGICAL SCIENCES↗

The influence of mineralogical, chemical and physical properties on grindability of commercial clinkers with high MgO level

This research investigates various methods able to identify possible mineralogical, physical and chemical influences on the grindability of commercial clinkers with high MgO level. The aim of the study is to evaluate the hardness and elastic modulus of the clinker mineral phases and their fracture strength during the comminution processes, comparing samples from clinkers with low MgO level (0.5%) and clinkers with elevated MgO levels (> 5.0%). The study of the influence of mineralogical, chemical and physical properties was carried out using several analytical techniques, such as: optical microscopy, X-ray diffraction with Rietveld refinement (XRD) and X-ray fluorescence (XRF). These techniques were useful in qualifying the different clinker samples. The drop weight test (DWT) and the Bond ball mill grindability test were performed to characterize the mechanical properties of clinkers. Nanoindentation tests were also carried out. Results from the Bond ball mill grindability test were found to be related to the hardness of the mineral phase and to mineralogical characteristics, such as type and amount of inclusions in silicates, belite and alite crystals shape, or microcracked alites. In contrast, the results obtained by the DWT were associated to the macro characteristics of clinkers, such as porosity, as well as to the hardness and mineralogical characteristics of belite crystals in clusters. Hardness instrumented tests helped to determine the Vickers hardness and elastic modulus from the mineral phases in commercial clinkers and produced different values for the pure phases compared to previous publications.

36 MATERIALS SCIENCE↗