Search NASA⌕ Search

SEARCH · Search NASA

Results for “intercalation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Surface Redox Pseudocapacitance of Partially Oxidized Titanium Carbide MXene in Water-in-Salt Electrolyte

Achieving pseudocapacitive intercalation in MXenes with neutral aqueous electrolytes and driving reversible redox reactions is scientifically appealing and practically useful. Here, we report that the partial oxidation of MXene intensifies pseudocapacitive Li + intercalation into Ti 3 C 2 T x MXene from neutral water-in-salt electrolytes. An in situ X-ray absorption near-edge structure analysis shows that the Ti oxidation state changes during the Li+ intercalation, indicating the presence of a surface redox reaction. The Ti oxidation/reduction is further confirmed by an in situ extended X-ray absorption fine structure analysis, which shows a reversible contraction/expansion of the Ti–C interatomic distance. The intensified Li + pseudocapacitive intercalation can be explained by the higher oxidation state of Ti at the open circuit potential. Furthermore, this work demonstrates the possibility of tuning the pseudocapacitive intercalation by adjusting the initial oxidation state of the transition metal on the MXene and offers a facile way to enhance the pseudocapacitance of various MXenes.

36 MATERIALS SCIENCE↗

Electrochemical and in-situ X-ray diffraction studies of Ti 3 C 2 T x MXene in ionic liquid electrolyte

2D titanium carbide (Ti 3 C 2 T x MXene) showed good capacitance in both organic and neat ionic liquid electrolytes, but its charge storage mechanism is still not fully understood. Here, electrochemical characteristics of Ti 3 C 2 T x electrode were studied in neat EMI-TFSI electrolyte. A capacitive behavior was observed within a large electrochemical potential range (from – 1.5 to 1.5 V vs. Ag). Intercalation and de-intercalation of EMI + cations and/or TFSI– anions were investigated by in-situ X-ray diffraction. Interlayer spacing of Ti 3 C 2 T x flakes decreases during positive polarization, which can be ascribed to either electrostatic attraction effect between intercalated TFSI– anions and positively charged Ti 3 C 2 T x nanosheets or steric effect caused by de-intercalation of EMI + cations. In conclusion, the expansion of interlayer spacing when polarized to negative potentials is explained by steric effect of cation intercalation.

2D carbide↗

HRTEM and neutron diffraction study of Li{sub x}Mo{sub 5}O{sub 17}: From the ribbon (x=5) structure to the rock salt (x=12) structure

Structure determination of the fully intercalated phase Li{sub 12}Mo{sub 5}O{sub 17} and of the deintercalated oxide Li{sub 5}Mo{sub 5}O{sub 17} has been carried out by electron microscopy and neutron powder diffraction. The reversible topotactic transformation between the ordered rock salt structure of the former and the ribbon structure of the latter (closely related to that of Li{sub 4}Mo{sub 5}O{sub 17}) is explained on the following basis: both structures can be described as strips built up as an assembly of infinite ribbons of MoO{sub 6} octahedra that are five octahedra thick, and that differ by slight displacements of the octahedral ribbons. We show that the electrochemical behavior of the Li{sub x}Mo{sub 5}O{sub 17} system is based on two sorts of Li{sup +} sites; those that are located within the strips between the ribbons, and those that are located at the border of the strips. The high rate of Li intercalation in this oxide and its reversibility are discussed in terms of its peculiar structure. -- Graphical abstract: Structure determination of the fully intercalated phase Li{sub 12}Mo{sub 5}O{sub 17} and of the deintercalated oxide Li{sub 5}Mo{sub 5}O{sub 17} has been carried out by electron microscopy and neutron powder diffraction. The reversible topotactic transformation between the ordered rock salt structure of the former and the ribbon structure of the latter is explained on the following basis: both structures can be described as strips built up as an assembly of infinite ribbons of MoO{sub 6} octahedra that are five octahedra thick, and that differ by slight displacements of the octahedral ribbons. We show that the electrochemical behavior of the Li{sub x}Mo{sub 5}O{sub 17} system is based on two sorts of Li{sup +} sites; those that are located within the strips between the ribbons, and those that are located at the border of the strips. The high rate of Li intercalation in this oxide and its reversibility are discussed in terms of its peculiar structure. Research highlights: {yields} Electron microscopy and neutron powder diffraction structure determination {yields} We have explained the reversible topotactic transformation between an ordered rock salt structure and a ribbon structure {yields} We show that the electrochemical behavior of the Li{sub x}Mo{sub 5}O{sub 17} system is based on two sorts of Li{sup +} sites {yields} The high rate of Li intercalation in this oxide and its reversibility are discussed in terms of its peculiar structure.

36 MATERIALS SCIENCE↗

Tuning the Hydrophobicity of Layer-Structure Silicates To Promote Adsorption of Nonaqueous Fluids: Effects of F – for OH – Substitution on CO 2 Partitioning into Smectite Interlayers

The intercalation of nonaqueous fluids in the nanopores of organic and inorganic materials is of significant interest, particularly in the energy science community. Recently, X-ray powder diffraction and computational modeling results have shown that structural F – for OH – substitution in layered silicates makes them more hydrophobic. Here, we use grand canonical molecular dynamics calculations to investigate how increasing the F – /(F – + OH – ) ratio of a prototypical layered silicate (the smectite Na-hectorite) impacts the intercalation behavior of CO 2 and H 2 O at elevated temperature and pressure. At the conditions of this study ( T = 323 K, P = 90 bar, water-saturated CO 2 ), increasing F – for OH – substitution causes decreasing total CO 2 + H 2 O intercalation, increasing CO 2 /(CO 2 + H 2 O) ratios in the interlayer galleries, and an increasing energy barrier to CO 2 and H 2 O intercalation. CO 2 intercalation is the greatest at monolayer basal spacings, and the results support the idea that with Na + as the exchangeable cation, the interlayers must be propped open by some H 2 O molecules to allow CO 2 to enter the interlayer galleries. The computed immersion energies suggest that the bilayer or a more expanded structure is the stable state under these conditions, in agreement with experimental results, and that the basal spacings of the minimum energy 2L structures increase with increasing F – for OH – substitution. Finally, these results are consistent with a wide range of experimental data for smectites at ambient conditions and elevated pressures and temperatures and suggest that F – for OH – substitution in conjunction with reduced structural charge and exchange with large, low charge cations may increase the ability of smectite minerals to incorporate hydrophobic species such as CH 4 , CO 2 , H 2 , and other organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-Step Lithiation of Tin Sulfide: An Investigation Using In Situ Electron Microscopy

Two-dimensional metal sulfides have been widely explored as promising electrodes for lithium ion batteries since their two-dimensional layered structure allows lithium ions to intercalate between layers. For tin disulfide, the lithiation process proceeds via a sequence of three different types of reactions: intercalation, conversion, and alloying but the full scenario of reaction dynamics remains nebulous. In this paper, we investigate the dynamical process of the multi-step reactions using in situ electron microscopy and discover an intermediate rock-salt phase with the disordering of Li and Sn cations, after the initial 2-dimensional intercalation. The disordered cations occupy all the octahedral sites and block the channels for intercalation, which alter the reaction pathways during further lithiation. Our first principles calculations of the non-equilibrium lithiation of SnS2 corroborate the energetic preference of the disordered rock-salt structure over known layered polymorphs. The in situ observations and calculations suggest a two-phase reaction nature for intercalation, disordering, and following conversion reactions. In addition, in situ de-lithiation observation confirms that the alloying reaction is reversible while the conversion reaction is not, which is consistent to the ex situ analysis. This work reveals the full lithiation characteristic of SnS2 and sheds light on the understanding of complex multistep reactions in two-dimensional materials.

25 ENERGY STORAGE↗

Activating MoS 2 for pH-Universal Hydrogen Evolution Catalysis

MoS 2 presents a promising catalyst for the hydrogen evolution reaction (HER) in water splitting, but its worse catalytic performance in neutral and alkaline media than in acidic environment may be problematic for practical application. This is because the other half reaction of water splitting, i.e., oxygen evolution reaction, often needs to be implemented in alkaline environment. Here we demonstrate a universal strategy that may be used to significantly improve the HER catalysis of MoS 2 in all kinds of environments from acidic to alkaline, proton intercalation. Protons may be enabled to intercalate between monolayer MoS 2 and underlying substrates or in the interlayer space of thicker MoS 2 by two processes: electrochemically polarizing MoS 2 at negative potentials (vs RHE) in acidic media or immersing MoS2 into certain acid solutions like TFSI. The improvement in catalytic performance is due to the activity enhancement of the active sites in MoS 2 by the intercalated protons, which might be related with the effect of the intercalated protons on electrical conductance and the adsorption energy of hydrogen atoms. The enhancement in catalytic activity by the intercalated proton is very stable even in neutral and alkaline electrolytes.

, mechanical behavior↗

Superconducting graphene sheets in CaC6 enabled by phonon-mediated interband interactions

There is a great deal of fundamental and practical interest in the possibility of inducing superconductivity in a monolayer of graphene. But while bulk graphite can be made to superconduct when certain metal atoms are intercalated between its graphene sheets, the same has not been achieved in a single layer. Moreover, there is a considerable debate about the precise mechanism of superconductivity in intercalated graphite. Here we report angleresolved photoelectron spectroscopy measurements of the superconducting graphite intercalation compound CaC6 that distinctly resolve both its intercalant-derived interlayer band and its graphene-derived p* band. Our results indicate the opening of a superconducting gap in the p* band and reveal a substantial contribution to the total electron–phonon-coupling strength from the p*-interlayer interband interaction. Combined with theoretical predictions, these results provide a complete account for the superconducting mechanism in graphite intercalation compounds and lend support to the idea of realizing superconducting graphene by creating an adatom superlattice.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low hydrogen solubility in clay interlayers limits gas loss in hydrogen geological storage

Gas intercalation into clay interlayers may result in hydrogen loss in the geological storage of hydrogen; a phenomenon that has not been fully understood and quantified. Here we use metadynamics molecular simulations to calculate the free energy landscape of H 2 intercalation into montmorillonite interlayers and the H 2 solubility in the confined water; in comparison with results obtained for CO 2 . Furthermore, the results indicate that H 2 intercalation into hydrated interlayers is thermodynamically unfavorable while CO 2 intercalation can be favorable. H 2 solubility in hydrated clay interlayers is in the same order of magnitude as that in bulk water and therefore no over-solubility effect due to nanoconfinement is observed – in striking contrast with CO 2 . These results indicate that H 2 loss and leakage through hydrated interlayers due to intercalation in a subsurface storage system, if any, is limited.

58 GEOSCIENCES↗

Comparison of alpha and beta tin for lithium, sodium, and magnesium storage: An ab initio study including phonon contributions

We present a comparative ab initio study of Li, Na, and Mg storage in tin, including phononic effects and phase competition between α and β Sn. Mg doping at low concentration is found to stabilize the β phase. On the contrary, Li and Na doping is shown to reverse the stability of the phases at room temperature: Li/Na-doped α-Sn is more stable than Li/Na-doped β-Sn up to a temperature of around 380/400 K. This may rationalize the formation of α-Sn upon lithiation and delithiation of β-Sn anodes reported in experimental studies. The changes in phase stability with Li/Na/Mg doping are directly related to the intercalation energies of Li/Na/Mg in one phase versus the other: at 300 K, Li/Na is easier intercalated in α-Sn (−0.37/−0.08 eV) than in β-Sn (0.06/0.49 eV), while Mg intercalation energy is, although positive (i.e., unfavored intercalation), lower in β-Sn (0.53 eV) than in α-Sn (0.66 eV). The temperature effect is found to affect significantly the intercalation energy, by up to 0.13 eV at 300 K. Analysis of diffusion barriers shows that Li, Na, and Mg diffusion in β-Sn is anisotropic with migration barriers along the (001) direction (respectively, 0.01, 0.22, and 0.07 eV) significantly lower than those in α-Sn (respectively, 0.20, 0.52, and 0.40 eV)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process to Selectively Distinguish Viable from Non-Viable Bacterial Cells

The combination of ethidium monoazide (EMA) and post-fragmentation, randomly primed DNA amplification technologies will enhance the analytical capability to discern viable from non-viable bacterial cells in spacecraft-related samples. Intercalating agents have been widely used since the inception of molecular biology to stain and visualize nucleic acids. Only recently, intercalating agents such as EMA have been exploited to selectively distinguish viable from dead bacterial cells. Intercalating dyes can only penetrate the membranes of dead cells. Once through the membrane and actually inside the cell, they intercalate DNA and, upon photolysis with visible light, produce stable DNA monoadducts. Once the DNA is crosslinked, it becomes insoluble and unable to be fragmented for post-fragmentation, randomly primed DNA library formation. Viable organisms DNA remains unaffected by the intercalating agents, allowing for amplification via post-fragmentation, randomly primed technologies. This results in the ability to carry out downstream nucleic acid-based analyses on viable microbes to the exclusion of all non-viable cells.

LaDuc, Myron T.↗

Compressed Expanded Natural Graphite (CENG) Processing for PCM Composites

The use of phase change materials (PCMs) in thermal energy storage applications has received considerable attention in recent decades. Organic PCMs are popular due to their high latent heat of fusion, noncorrosive properties, and relative stability over many charge and discharge cycles. A primary limitation of these materials is their low thermal conductivity. This has led researchers to develop various methods to increase thermal conductivity by seeding PCM with or impregnating them into more conductive materials. One method is to impregnate PCMs into compressed expanded natural graphite (CENG) matrices, which can improve thermal conductivity by a factor of 100. CENG matrices have received particular interest due to their low cost, high porosity, small (nano/micro) pore size, high pore density, high thermal conductivity, and ability to be compressed into many geometries. PCM/CENG matrix composites have been extensively studied; however, the effect that CENG processing has on PCM saturation and the overall matrix thermal conductivity has not been well investigated. This processing includes four major steps including graphite intercalation, thermal shock, compression, and PCM saturation. Intercalation involves soaking graphite flakes in sulfuric and/or nitric acid to intercalate the acids between the graphene layers. The graphite flakes are then subjected to a high-temperature thermal shock, during which the intercalated acid is gasified rapidly, pushing the graphene layers apart, resulting in accordion-shaped graphite "worms". The "worms" are then compacted to a desired bulk density and then soaked with molten PCM until fully saturated. The properties of the produced CENG matrix, and its ability to allow PCM permeation, are sensitive to the processing parameters, namely, the thermal shock temperature and exposure time, as well as the matrix apparent density or porosity. Here, we study the effect of the thermal shock conditions necessary to expand intercalated graphite flakes on PCM saturation and the expanded graphite's thermal conductivity and morphology. We found that the thermal shock temperature exhibits the greatest influence. At greater shock temperatures, SEM images showed that expanded graphite worms exhibited greater density of pores, thus increasing total surface area within the matrices. Increasing thermal shock temperature yielded greater overall PCM saturation, as well as an increased rate of saturation. Improvements in PCM saturation rate and overall saturation are obtained as the shock temperature is increased. Longer exposure to thermal shock also improves initial saturation rates and is beneficial if a shortened impregnation time is needed. Thermal shock conditions did not impact thermal conductivity; however, conductivity was largely affected by matrix porosity. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to that observed in previous studies.

compressed expanded natural graphite↗

Ionically Active MXene Nanopore Actuators

Reversible electrochemical intercalation of cations into the interlayer space of 2D materials induces tunable physical and chemical properties in them. In MXenes, a large class of recently developed 2D carbides and nitrides, low intercalation energy, high storage capacitance, and reversible intercalation of various cations have led to their improved performance in sensing and energy storage applications. In this work, a coupled nanopore-actuator system where an ultrathin free-standing MXene film serves as a nanopore support membrane and ionically active actuator is reported. In this system, the contactless MXene membrane in the electric field affects the cation movement in the field through their (de)intercalation between individual MXene flakes. This results in reversible swelling and contraction of the membrane monitored by ionic conductance through the nanopore. This unique nanopore coupled to a mechanical actuation system could provide new insights into designing single-molecule biosensing platforms at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating the Bond Strength of DNA–Nanoparticle Superlattices

In this work, a method is introduced for modulating the bond strength in DNA–programmable nanoparticle (NP) superlattice crystals. This method utilizes noncovalent interactions between a family of [Ru(dipyrido[2,3-a:3',2'-c]phenazine)(N–N) 2 ] 2+ -based small molecule intercalators and DNA duplexes to postsynthetically modify DNA–NP superlattices. This dramatically increases the strength of the DNA bonds that hold the nanoparticles together, thereby making the superlattices more resistant to thermal degradation. In this work, we systematically investigate the relationship between the structure of the intercalator and its binding affinity for DNA duplexes and determine how this translates to the increased thermal stability of the intercalated superlattices. We find that intercalator charge and steric profile serve as handles that give us a wide range of tunability and control over DNA–NP bond strength, with the resulting crystal lattices retaining their structure at temperatures more than 50 °C above what nonintercalated structures can withstand. This allows us to subject DNA–NP superlattice crystals to conditions under which they would normally melt, enabling the construction of a core–shell (gold NP-quantum dot NP) superlattice crystal.

59 BASIC BIOLOGICAL SCIENCES↗

Interlayer engineering of Fe 3 GeTe 2 : From 3D superlattice to 2D monolayer

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546 , 265–269 (2017) and B. Huang et al., Nature 546 , 270–273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14 , 408–419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe 3 GeTe 2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature ( T C ), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

36 MATERIALS SCIENCE↗

Evaluation of Carbon Anodes for Rechargeable Lithium Cells

Both liquid phase intercalation technique and electrochemical intercalation technique were examined for the Li-carbon material preparation. The electrochemical techniques include a intermittent discharge method and a two step method. These two electrochemical techniques can ensure to achieve the maximum reversible Li capacity for common commercially available carbon materials. The carbon materials evaluated by the intercalacation method includes: pitch coke, petroleum cole, PAN fiber and graphite materials. Their reversible Li capacity were determined and compared. In this paper, we also demonstrate the importance of EPDM binder composition in the carbon electrode. Our results indicated that it can impact the Li intercalation and de-intercalation capacity in carbon materials. Finally, two possibilities that may help explain the capacity degradation during practical cell cycling were proposed.

carbon anodes rechargeable lithium cells material ↗

Joint charge storage for high-rate aqueous zinc-manganese dioxide batteries

Aqueous rechargeable zinc-manganese dioxide batteries have great promise for large-scale energy storage due to the use of environmental friendly, abundant, and rechargeable Zn metal anode and MnO2 cathode. In the literature various intercalation and conversion reaction mechanisms have been reported depending on the origin of the starting materials, but it is not clear how these mechanisms can be simultaneously manipulated to improve the charge storage and transport properties. Here, we report a systematical study to understand the electrolyte controlled charge-storage mechanisms in layered d-MnO2. A joint Zn2+ intercalation pseudocapacitance in bulky d-MnO2 and H+ conversion reaction pathway in a wide C-rate charge-discharge range facilitates the high rate performance of high capacity d-MnO2 cathodes. The Zn-d-MnO2 system delivers discharge capacity of 136.9 mAh g-1 at 20 C and capacity retention of 92% over 4,000 cycles with joint charge storage mechanisms.

Jin, Yan↗

Operando Interaction and Transformation of Metastable Defects in Layered Oxides for Na‐Ion Batteries

Non-equilibrium defects often dictate the macroscopic properties of materials. They largely define the reversibility and kinetics of processes in intercalation hosts in rechargeable batteries. Recently, imaging methods have demonstrated that transient dislocations briefly appear in intercalation hosts during ion diffusion. Despite new discoveries, the understanding of impact, formation and self-healing mechanisms of transient defects, including and beyond dislocations, is lacking. Here, operando X-ray Bragg Coherent Diffractive Imaging (BCDI) and diffraction peak analysis capture the stages of formation of a unique metastable domain boundary, defect self-healing, and resolve the local impact of defects on ionic diffusion in Na x Ni 1-y MnyO 2 intercalation hosts in a charging sodium-ion battery. Results, applicable to a wide range of layered intercalation materials due to the shared nature of framework layers, elucidate new dynamics of transient defects and their connection to macroscopic properties, and suggest how to control the nanostructure dynamics.

36 MATERIALS SCIENCE↗

Atomistic Conversion Reaction Mechanism of WO 3 in Secondary Ion Batteries of Li, Na, and Ca

Abstract Intercalation and conversion are two fundamental chemical processes for battery materials in response to ion insertion. The interplay between these two chemical processes has never been directly seen and understood at atomic scale. Here, using in situ HRTEM, we captured the atomistic conversion reaction processes during Li, Na, Ca insertion into a WO 3 single crystal model electrode. An intercalation step prior to conversion is explicitly revealed at atomic scale for the first time for Li, Na, Ca. Nanoscale diffraction and ab initio molecular dynamic simulations revealed that after intercalation, the inserted ion–oxygen bond formation destabilizes the transition‐metal framework which gradually shrinks, distorts and finally collapses to an amorphous W and M x O (M=Li, Na, Ca) composite structure. This study provides a full atomistic picture of the transition from intercalation to conversion, which is of essential importance for both secondary ion batteries and electrochromic devices.

He, Yang↗