Search NASA⌕ Search

SEARCH · Search NASA

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Charge Transfer Processes in OPV Materials as Revealed by EPR Spectroscopy

Understanding charge separation and charge transport at a molecular level is crucial for improving the efficiency of organic photovoltaic (OPV) cells. Under illumination of Bulk Heterojunction (BHJ) blends of polymers and fullerenes, various paramagnetic species are formed including polymer and fullerene radicals, radical pairs, and photoexcited triplet states. Light-induced Electron Paramagnetic Resonance (EPR) spectroscopy is ideally suited to study these states in BHJ due to its selectivity in probing the paramagnetic intermediates. Some advanced EPR techniques like light-induced ENDOR spectroscopy and pulsed techniques allow the determination of hyperfine coupling tensors, while high-frequency EPR allows the EPR signals of the individual species to be resolved and their g-tensors to be determined. In these magnetic resonance parameters reveal details about the delocalization of the positive polaron on the various polymer donors which is important for the efficient charge separation in BHJ systems. Time-resolved EPR can contribute to the study of the dynamics of charge separation, charge transfer and recombination in BHJ by probing the unique spectral signatures of charge transfer and triplet states. Furthermore, the potential of the EPR also allows characterization of the intermediates and products of BHJ degradation.

36 MATERIALS SCIENCE↗

Quantifying Dynamic Processes in Reactive Materials: An Extended Burn Tube Test

Abstract A common method for measuring the reactivity of rapidly deflagrating materials has been to loosely pack a desired mixture into an approx. 10 cm long×3 mm diameter acrylic tube, ignite the material on one end, and report the observed self‐propagating flame velocity through the material. While this method can yield qualitative information, linking this to quantitative intrinsic properties, such as particle burn time, has remained challenging. In this work, we significantly redesign the traditional burn tube experiment. Between 25 and 250 mg of nanocomposite aluminum/copper oxide (Al/CuO) thermite is loosely packed into the capped end of a 1.8 m long tube, and the remainder of the tube is left unfilled. The material is ignited using a hot wire, resulting in a steadily‐propagating luminous front, which extends part, or all, of the way down the length of the tube. We suggest the behavior is a result of “reactive entrainment”, which occurs when the reaction time scale becomes longer than the characteristic momentum relaxation time scale. When this criterion is met, and when there are significant pressure gradients present or produced during the reaction, material will be entrained by the gases before and/or during the reaction; a behavior very different from conventional thermites, which use larger particle sizes. The effect of sample mass and tube diameter on propagation velocity is investigated, and we find a linear scaling with mass and a power law scaling with tube radius ( r −1.3 ) between 1.56 and 4.76 mm radii. For several conditions, we observe the reaction complete; defined by the distance where the propagation velocity decreases to a fixed fraction of its steady value. The ratio of quench distance to propagation velocity was found to approach a constant value of 3.29±0.70 ms, which we suggest is the burn time of the Material. For the range of masses studied in this work, the burn time was found to be independent of mass, implying that it is an intrinsic particle burn time. We expect other quantitative information can be deduced from this experiment, so long as the chosen sample mass and tube dimensions allow one to observe the full extent of reaction.

Sullivan, Kyle T.↗

Thermokinetic mixing compounding for polymer composites – a comprehensive review

High-speed thermokinetic mixers (K-mixers) represent an advanced compounding technology that employs intense shear and friction to convert kinetic energy directly into thermal energy. This mechanism enables rapid mixing cycles, often under one minute, facilitating exceptional filler dispersion while minimizing the material’s thermal history. This is particularly effective for compounding challenging materials, including heat-sensitive biopolymers, wet filler feedstocks, and nanofillers prone to agglomeration. As the first comprehensive review of this technology, this article synthesizes the fundamental principles of thermokinetic mixing (K-mixing) and surveys recent advances in polymer composite fabrication. We contrast the working principles of K-mixers with conventional twin-screw extrusion, highlighting distinct advantages in dispersing nanoscale fillers, exfoliating layered materials, and processing wet cellulosic feedstocks and ultra-high filler loadings (e.g., 85 wt%). Furthermore, strategies to optimize filler–matrix interfacial bonding under rapid-processing constraints, such as the kinetic selection of compatibilizers and fiber surface treatments, are evaluated. Finally, we analyze key structure-processing-property relationships and outline future directions in scaling up, reactive processing, and hybrid material development.

Zhang, Xuefeng [University of Maine]↗

Solvothermal Synthesis of Tetrahedrite: Speeding Up the Process of Thermoelectric Material Generation

Derivatives of synthetic tetrahedrite, Cu 12 Sb 4 S 13 , are receiving increasing attention in the thermoelectric community due to their exploitation of plentiful, relatively nontoxic elements, combined with a thermoelectric performance that rivals that of PbTe-based compounds. However, traditional synthetic methods require weeks of annealing at high temperatures (450–600 °C) and periodic regrinding of the samples. Here we report a solvothermal method to produce tetrahedrite that requires only 1 day of heating at a relatively low temperature (155 °C). This allows preparation of multiple samples at once and is potentially scalable. The solvothermal material described herein demonstrates a dimensionless figure of merit (ZT) vs temperature curve comparable to that of solid-state tetrahedrite, achieving the same ZT of 0.63 at ~720 K. In conclusion, as with the materials from solid-state synthesis, products from this rapid solvothermal synthesis can be improved by mixing in a 1:1 molar ratio with the Zn-containing natural mineral, tennantite, to achieve 0.9 mol equiv of Zn. This leads to a 36% increase in ZT at ~720 K for solvothermal tetrahedrite, to 0.85.

36 MATERIALS SCIENCE↗

Developing grain boundary diagrams as a materials science tool: A case study of nickel-doped molybdenum

Impurity-based, premelting-like, grain boundary (GB) ''phases'' (complexions) can form in alloys and influence sintering, creep, and microstructural development. Calculation of Phase Diagrams (CalPhaD) methods and Miedema-type statistical interfacial thermodynamic models are combined to forecast the formation and stability of subsolidus quasiliquid GB phases in binary alloys. This work supports a long-range scientific goal of developing ''GB (phase) diagrams'' as a new materials science tool to help controlling the materials fabrication processing and resultant materials properties. Using nickel-doped molybdenum as a model system, a type of GB diagram (called ''{lambda} diagram'') is computed to represent the temperature- and composition-dependent thermodynamic tendency for general GBs to disorder. Subsequently, controlled sintering experiments are conducted to estimate the GB diffusivity as a function of temperature and overall composition, and the experimental results correlate well with the computed GB diagram. Although they are not yet rigorous GB-phase diagrams with well-defined transition lines, the predictability and usefulness of such {lambda} diagrams are demonstrated. Related interfacial thermodynamic models and computational approaches are discussed.

36 MATERIALS SCIENCE↗

Geochemical Modeling of F Area Seepage Basin Composition and Variability

From the 1950s through 1989, the F Area Seepage Basins at the Savannah River Site (SRS) received low level radioactive wastes resulting from processing nuclear materials. Discharges of process wastes to the F Area Seepage Basins followed by subsequent mixing processes within the basins and eventual infiltration into the subsurface resulted in contamination of the underlying vadose zone and downgradient groundwater. For simulating contaminant behavior and subsurface transport, a quantitative understanding of the interrelated discharge-mixing-infiltration system along with the resulting chemistry of fluids entering the subsurface is needed. An example of this need emerged as the F Area Seepage Basins was selected as a key case study demonstration site for the Advanced Simulation Capability for Environmental Management (ASCEM) Program. This modeling evaluation explored the importance of the wide variability in bulk wastewater chemistry as it propagated through the basins. The results are intended to generally improve and refine the conceptualization of infiltration of chemical wastes from seepage basins receiving variable waste streams and to specifically support the ASCEM case study model for the F Area Seepage Basins. Specific goals of this work included: (1) develop a technically-based 'charge-balanced' nominal source term chemistry for water infiltrating into the subsurface during basin operations, (2) estimate the nature of short term and long term variability in infiltrating water to support scenario development for uncertainty quantification (i.e., UQ analysis), (3) identify key geochemical factors that control overall basin water chemistry and the projected variability/stability, and (4) link wastewater chemistry to the subsurface based on monitoring well data. Results from this study provide data and understanding that can be used in further modeling efforts of the F Area groundwater plume. As identified in this study, key geochemical factors affecting basin chemistry and variability included: (1) the nature or chemistry of the waste streams, (2) the open system of the basins, and (3) duration of discharge of the waste stream types. Mixing models of the archetype waste streams indicated that the overall basin system would likely remain acidic much of the time. Only an extended periods of predominantly alkaline waste discharge (e.g., >70% alkaline waste) would dramatically alter the average pH of wastewater entering the basins. Short term and long term variability were evaluated by performing multiple stepwise modeling runs to calculate the oscillation of bulk chemistry in the basins in response to short term variations in waste stream chemistry. Short term (1/2 month and 1 month) oscillations in the waste stream types only affected the chemistry in Basin 1; little variation was observed in Basin 2 and 3. As the largest basin, Basin 3 is considered the primary source to the groundwater. Modeling showed that the fluctuation in chemistry of the waste streams is not directly representative of the source term to the groundwater (i.e. Basin 3). The sequence of receiving basins and the large volume of water in Basin 3 'smooth' or nullify the short term variability in waste stream composition. As part of this study, a technically-based 'charge-balanced' nominal source term chemistry was developed for Basin 3 for a narrow range of pH (2.7 to 3.4). An example is also provided of how these data could be used to quantify uncertainty over the long term variations in waste stream chemistry and hence, Basin 3 chemistry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Feasibility Studies on Process Coupling of Transesterification and Methanol Synthesis Using Cellulose and Bio-oil

The Sponsored Programs of WKU is the compliance management for the entire campus. They are responsible for both the fiscal compliance, in addition to the coordination and implementation of pre and post-award documentation. Dr. Wei-Ping Pan is the Principal Investigator of the project, and is responsible for the carrying out of the objectives outlined in this proposal. Dr. Yan Cao, serve as the Co-Principal Investigator, who is responsible for directing the team in carrying out the objectives outlined. This project investigates feasibilities of combining the transesterification bio-diesel production into the traditional methanol production process. In this process, the raw materials for process feedstock will be completely the biomass, include cellulose fractions of biomass and bio-oil fractions of biomass. The process product will be either the bio-diesel or mixed bio-diesel and bio-methanol, which both can be directly fed as the alterative liquid fuel and also has some improvement on fuel handling. Since its capability of the complete utilization of every part of biomass (both cellulose biomass and bio-oils) and capability of the in-site optimization of reaction heat transfer and thermodynamics equilibrium shift and instant separation of process product, the proposed process can better balance several drawbacks of individual process during production of bio-diesel. This is a totally “green” process with almost all aspects of process to embody the characterization of renewable, compatibility and economic.

10 SYNTHETIC FUELS↗

MaRIE: Probing Dynamic Processes in Soft Materials Using Advanced Light Sources

Los Alamos National Laboratory has developed a concept for a new research facility, MaRIE: Matter-Radiation Interactions in Extremes. The key motivation for MaRIE is to develop new experimental capabilities needed to fill the existing gaps in our fundamental understanding of materials important for key National Nuclear Security Agency (NNSA) goals. MaRIE will bring two major new capabilities: (a) the ability to characterize the meso- and microstructure of materials in bulk as well as local dynamic response characteristics, and (b) the ability to characterize how this microstructure evolves under NNSA-relevant conditions and impacts the material’s performance in this regime.

36 MATERIALS SCIENCE↗

FY 2025 Multidimensional Data Correlation Platform: Unified Software Architecture for Advanced Materials and Manufacturing Technologies Data Management and Processing

The Advanced Materials and Manufacturing Technologies (AMMT) program continues to advance a data-driven approach to demonstrate the utility of additive manufacturing for fabricating components for nuclear applications. A key scientific goal is to leverage data to better understand manufacturing outcomes and thereby improve the performance, reliability, and lifespan of nuclear components. Ultimately, this effort supports the development of standards for certification and qualification of additively manufactured components, enabling broader industry adoption. In support of this objective, the AMMT program is building and deploying a data management platform to record, index, analyze, and make available the manufacturing data generated across the AMMT program. In FY 2023, the team conceptualized the architecture of the platform and, in FY 2024, deployed the first functional version at the Oak Ridge National Laboratory (ORNL) Manufacturing Demonstration Facility (MDF). In FY 2025, the platform was officially opened to all AMMT members. To enable this expansion, core modifications and enhancements were developed, including improvements to the user interface and workflows for data entry and retrieval. Most notably, robust security and access control mechanisms were implemented to protect data and manage information sharing. This effort featured a logging system, protected views, and controlled access mechanisms. This report documents these enhancements and the transition of the platform into program-wide use.

36 MATERIALS SCIENCE↗

Final Report SC0022244

Final Report: Electro-Nano-Pulsing (ENP) Processing of Advanced Materials

36 MATERIALS SCIENCE↗

Hydrogen storage material and related processes

Disclosed herein is a composition comprising a complex hydride and a borohydride catalyst wherein the borohydride catalyst comprises a BH.sub.4 group, and a group IV metal, a group V metal, or a combination of a group IV and a group V metal. Also disclosed herein are methods of making the composition.

Soloveichik, Grigorii Lev↗