Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Structural, Electrical, and Magnetic Properties of Ferrite-Reinforced PANI Composites

A Y-type hexagonal ferrite with chemical composition CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} was prepared by a sol-gel auto combustion technique. Y-ferrite/PANI nanocomposites were prepared by in situ polymerization of PANI with general formula CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} (1-x) + PANI (x) (x = 0.30, 0.50, 0.8, and 1) with nomenclature CF1, CF2, CF3, and P respectively. The samples were characterized by X-ray diffraction (XRD) and electrical and magnetic measurements. X-ray diffraction revealed that Y-type ferrite was successfully prepared in a single phase form. DC resistivity increases with increasing ferrite filler in nanocomposites due to large resistive behavior of ferrite in conducting polymer matrix. The dielectric constant, dielectric loss, and AC conductivity decreases with the increase of ferrite content. The dielectric is high due to interfacial polarization at low frequency, and it is low at high frequency following Maxwell-Wagner model. The coercivity increases with the decrease of ferrite filler content whereas saturation magnetization and remanence decreases which is due to random distribution of ferrite filler particles in PANI matrix. Due to large coercivity and low values of ε′ and ε″, the present samples may be useful in recording media and electromagnetic shielding.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gamma-ray spectrometry analysis methods for radioisotope dissolution and mixing for nuclear forensics applications

We report the production of surrogate nuclear explosive debris involves the dissolution of irradiated fissile material, elemental isolation, and recombination based on required fission product ratios. Gamma-ray spectrometry is used following each step to assess the radioactive fission product inventory. A high-purity germanium detector is used to measure each sample, and the detector efficiencies are determined prior to sample measurements. Through radiochemical techniques, elements are isolated and recombined into samples with specific fission product ratios. As a result, a matrix-based approach can account for imperfect chemical separations to calculate the proper mixture volumes to obtain intended volatile-to-refractory fission product ratios, or R-values.

07 ISOTOPE AND RADIATION SOURCES↗

Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies

In this study, to produce electrically conductive ceramics, rapid hot press (RHP) sintering of 3 mol.% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) and 3Y-TZP/TiN composites with TiN amounts of 25, 35, and 45 vol.% was performed at 1300, 1350, and 1400 °C. Interestingly, the toughness and hardness were improved in the presence of TiN up to 35 vol.% and maximum fracture toughness and hardness of 5.40 ± 0.05 MPa m{sup 1/2} and 14.50 ± 0.06 GPa, respectively, were obtained. However, the bending strength was decreased which could be attributed to the rather weak interfaces of nitride and oxide phases. Regarding the zirconia matrix, the effect of grain size on fracture toughness of the samples has been studied using x-ray diffraction and field emission scanning electron microscope (FESEM) analysis. It was also found that electrical resistivity decreased to the value of 6.88 × 10{sup −6} Ω m at 45 vol.% of TiN. It seems the TiN grains form a network to impose conductivity on the ZrO{sub 2} body; however, below 35 vol.% TiN, due to lack of percolation effect, this conductivity could not be maintained according to FESEM studies. Finally, electrically conductive samples were successfully machined by electrical discharge machining (EDM).

36 MATERIALS SCIENCE↗

High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and Its Effect on Hardness and Wear Properties

This work evaluates the effect of a destabilization treatment combined with a subcritical diffusion (SCD) and a subsequent quenching (Q) steps on precipitation of secondary carbides and their influence on the wear properties of HCCI (16%Cr). The destabilization of the austenite at high temperature leads to a final microstructure composed of eutectic and secondary carbides, with an M{sub 7}C{sub 3} nature, embedded in a martensitic matrix. An improved wear resistance was observed in the SCD + Q samples in comparison with the Q one, which was attributed to the size of secondary carbides.

36 MATERIALS SCIENCE↗

Proppant embedment in coal and shale: Impacts of stress hardening and sorption

During methane production in CBM reservoirs, the influence of proppant embedment and permeability damage cannot be neglected – especially where the wall-rock is soft. Effective stresses are elevated during methane recovery, increasing both normal loading stress and confinement and simultaneously overprinting sorption-induced volumetric strains. Experiments and analytic modeling are conducted to define key mechanisms controlling these competitive effects. We independently measure overall sample compaction (external LVDT) and local strain (strain gauge) in the matrix to deconvolve proppant embedment in a propped fracture for different conditions of confining stress. The results show symptomatic behaviors of elastic (shale) and elastoplastic (coal) responses of embedment. Different from shale, the evolution of embedment is convex upwards with increased stress where indented depth increases more rapidly as loading stress increases under constant confinement. In addition, a stress-hardening effect is found to play a pivotal role in determining the characteristics of indentation, which are examined in terms of evolution profiles, deformation regimes, embedment slopes, curvatures, yield points and irreversible indentations. Based on the experimental observations a semianalytical model predicts indentation and the evolution of propped permeability under recreated in-situ stress conditions. A simplified case study is conducted to further illustrate the evolution of aperture and permeability of a propped fracture in CBM reservoirs. The modeling results suggest that proppant embedment is significantly overestimated if the variable stress-hardening (VSH) effect is neglected, especially when effective stress is large. Moreover, a decrease in indentation depth possibly occurs during late stage methane production, resulting in a reversal/recovery in fracture closure. This is because desorption-induced shrinkage becomes the predominant effect, causing an increase in aperture and a reduction in the indented volume of proppant. The resulting recovery in permeability implies that the propped coal fracture has the potential to optimally facilitate methane production as a pathway, even at high closure stresses generated by methane drainage.

01 COAL, LIGNITE, AND PEAT↗

Calcination pretreatment effects on acid leaching characteristics of rare earth elements from middlings and coarse refuse material associated with a bituminous coal source

The pretreatment of middlings and coarse refuse material collected from a Pocahontas No.3 coal source using calcination was investigated for the potential of improving the leaching recovery of rare earth elements. Calcination at 600 °C significantly and preferentially improved light REE (LREE) recovery to values in the range of 80-90% using 1.2 M HCl. The positive effect was due to the increased pore diameter and volume as well as thermal decomposition of the minerals associated with the LREEs. Heavy REE recovery was not increased after calcination at 600 °C due to the need for higher temperatures for the thermal decomposition of HREE minerals. Furthermore, some HREEs were also associated with sulfide minerals (e.g., pyrite) which were transformed into low-solubility oxides (e.g., hematite) after roasting at 600 °C. Based on the leaching characteristics of the major elements (Fe, Al, Ca and Mg) and REEs along with SEM EDX data, it was concluded that REEs in the two samples mainly occurred as phosphate minerals. In the middlings, some of the minerals were completely encapsulated by kaolinite, which was less apparent in the coarse refuse. In addition, it was found that a portion of the REEs (10-25%) in the samples were associated with micro-dispersed material in the organic matrix and was released after calcination and easily recovered using 0.1M (NH 4 ) 2 SO 4 solution at pH 5. In conclusion, Scandium primarily occurred in mineral forms with minimum amounts associated with ion-adsorbed clays and organic association.

01 COAL, LIGNITE, AND PEAT↗

Path integral Monte Carlo calculation of the momentum distribution of the homogeneous electron gas at finite temperature

Path integral Monte Carlo (PIMC) simulations are employed to calculate the momentum distribution of the homogeneous electron gas at finite temperature. Open paths are introduced to sample off-diagonal elements of the real-space density matrix. Here it is demonstrated how the restricted PIMC method can be extended to incorporate open paths in order to allow for the simulations in fermionic systems where a sign problem is present. The computed momentum distribution shows significant deviations from behavior of free fermions when strong correlations are present but agrees with predictions from variational methods.

36 MATERIALS SCIENCE↗

Probing thermodynamics of radiogenic helium and defects in $δ$-plutonium alloys and interactions with adsorbed environmental gases

Differential scanning calorimetry coupled with simultaneous evolved gas analysis (DSC-EGA) on aged δ-Pu samples shows that most radiogenic helium remains trapped within the Pu matrix at temperatures very close to, or slightly above, the melting temperature. Our results indicate that helium release from 50-year-old δ-Pu occurs as a burst just below the melting temperature (>0.994 T m ), with subsequent pressure oscillations as temperature increases. Subordinate quantities of H 2 were also released along with helium. Here, the helium emission tails off and ceases above ~720 – 750°C. In a δ-Pu alloy aged 6 years, the initial helium burst occurs slightly above melting (~1.015 – 1.042 T m ), with a discrete, larger helium spike occurring between 670 and 686°C. The proximity of helium release to the liquidus transition presented challenges in the deconvolution of overlapping process enthalpies, the liquidus endotherm, and the exotherm resulting from bubble collapse, annealing and gas expulsion. Helium’s strong affinity for vacancy binding in a 2He-vac configuration is predicted by Density Functional Theory (DFT) modeling. The measured stored energy associated with the He release events in a 50-year-old δ alloy is on the order of ~ 10–11 J/g, which is significantly higher than stored energies measured in the sub-solidus regimes (~2 J/g) that are related to the solid-state annealing of processing- and radiation-induced defects. This implies that aged δ Pu alloys have a remarkable resilience to accommodate the lattice strain produced by the internal pressure of the helium bubbles and provides further insight into the thermodynamic behavior of aged δ Pu.

36 MATERIALS SCIENCE↗

U-Pu and Ba-Cs isotopic measurements on Trinitite by laser ablation sampling on the Neoma MC-ICP-MS

In this study we present the results of combined U-Pu and Ba-Cs isotope measurements obtained by laser ablation (LA) sampling of two glassy debris fragments (‘Trinitite’) from the world's first atomic bomb detonation conducted in New Mexico on July 16, 1945. Our primary goal in conducting these measurements was to understand whether examination of the U-Pu and Ba-Cs systematics by direct sampling (e.g. without any chemical separation or purification prior to isotope ratio measurement) could yield meaningful information that would differentiate the Trinitite fragments from glassy material lacking a nuclear fission signature. These measurements were conducted on a ThermoFisher Scientific Neoma multi collector – inductively coupled plasma – mass spectrometer (MC-ICP-MS), which is a relatively new MC-ICP-MS platform, so we also examine the behavior of these isotope systems in standards sampled in solution and via LA. Unsurprisingly, the measurements made on purified solutions of the U, Pu, and Ba isotopic standards produce high precision isotope ratios. Furthermore, this extends to the U-Pu measurements made by LA sampling, with the expected degradation in precision and accuracy related to matrix effects and signal intensity fluctuation. However, the Ba-Cs data acquired by LA is of low precision across all of the matrices examined and bears evidence of complex mass fractionation that will require further investigation to resolve. In total, our results indicate that the observed U-Pu isotope data are of sufficient quality to accurately constrain the U and Pu isotopic composition of glass containing sub-ppm levels of these elements which in turn could be used to differentiate glass containing anthropogenic fission products from natural glass whereas the Ba-Cs LA data cannot be used for this purpose until further methodological refinement is performed.

Ba-Cs↗

Excitonic Energy Landscape of the Y16F Mutant of the Chlorobium tepidum Fenna–Matthews–Olson (FMO) Complex: High Resolution Spectroscopic and Modeling Studies

We report high-resolution (low-temperature) absorption, emission, and nonresonant/resonant hole-burned (HB) spectra and results of excitonic calculations using a non-Markovian reduced density matrix theory (with an improved algorithm for parameter optimization in heterogeneous samples) obtained for the Y16F mutant of the Fenna–Matthews–Olson (FMO) trimer from the green sulfur bacterium Chlorobium tepidum. We show that the Y16F mutant is a mixture of FMO complexes with three independent low-energy traps (located near 817, 821, and 826 nm), in agreement with measured composite emission and HB spectra. Two of these traps belong to mutated FMO subpopulations characterized by significantly modified low-energy excitonic states. Hamiltonians for the two major subpopulations (Sub 821 and Sub 817 ) provide new insight into extensive changes induced by the single-point mutation in the vicinity of BChl 3 (where tyrosine Y16 was replaced with phenylalanine F16). The average decay time(s) from the higher exciton state(s) in the Y16F mutant depends on frequency and occurs on a picosecond time scale.

59 BASIC BIOLOGICAL SCIENCES↗

Simple Host−Guest Chemistry To Modulate the Process of Concentration and Crystallization of Membrane Proteins by Detergent Capture in a Microfluidic Device

This paper utilizes cyclodextrin-based host-guest chemistry in a microfluidic device to modulate the crystallization of membrane proteins and the process of concentration of membrane protein samples. Methyl-{beta}-cyclodextrin (MBCD) can efficiently capture a wide variety of detergents commonly used for the stabilization of membrane proteins by sequestering detergent monomers. Reaction Center (RC) from Blastochloris viridis was used here as a model system. In the process of concentrating membrane protein samples, MBCD was shown to break up free detergent micelles and prevent them from being concentrated. The addition of an optimal amount of MBCD to the RC sample captured loosely bound detergent from the protein-detergent complex and improved sample homogeneity, as characterized by dynamic light scattering. Using plug-based microfluidics, RC crystals were grown in the presence of MBCD, giving a different morphology and space group than crystals grown without MBCD. The crystal structure of RC crystallized in the presence of MBCD was consistent with the changes in packing and crystal contacts hypothesized for removal of loosely bound detergent. The incorporation of MBCD into a plug-based microfluidic crystallization method allows efficient use of limited membrane protein sample by reducing the amount of protein required and combining sparse matrix screening and optimization in one experiment. The use of MBCD for detergent capture can be expanded to develop cyclodextrin-derived molecules for fine-tuned detergent capture and thus modulate membrane protein crystallization in an even more controllable way.

59 BASIC BIOLOGICAL SCIENCES↗

Scaling of Imbibition Front Dynamics in Heterogeneous Porous Media

Here we report a quantitative study on the dynamics of countercurrent imbibition in fractured rock samples with the application of CO 2 geosequestration, as the rock matrix is saturated with CO 2 and brine exists in the adjacent microfracture. Direct pore-scale simulations of spontaneous and forced imbibition in a three-dimensional heterogeneous porous matrix enable us to capture the effect of microscopic properties on the imbibition dynamics as these pore-level descriptions are ignored in the existing coarse-grained models. We have established new scaling classes for the propagation of the center of mass of the imbibition front and fluid-fluid interface broadening. It has become evident that the wettability is a major factor which leads to anomalies in these scaling laws. While the governing capillarity under the water-wet condition induces fast roughening dynamics of the interface, the adverse effect of capillary pressure under the intermediate-wet condition leads to a damping effect on the imbibition front fluctuations.

58 GEOSCIENCES↗

Free-space Electromagnetic Metamaterials From The Far Infrared To The Visible

The development of electromagnetic metamaterials by micro/nanomanufacturing at SSLS has led to matrix-embedded or substrate-supported rod-split-ring-based samples reaching left-handed pass-bands at 216 THz or 1.39 {mu}m and to free-space S-string bi-layer chips at 2.2 THz. Potential applications of metamaterials range from sub-wavelength resolution imaging over invisibility cloaking to advanced antennae and are relevant to fields including microscopy, lithography, electromagnetic shielding, and telecommunication.

36 MATERIALS SCIENCE↗

Correction of absorption-edge artifacts in polychromatic X-ray tomography in a scanning electron microscope for 3D microelectronics

X-ray tomography is widely used in materials science. However, X-ray scanners are often based on polychromatic radiation that creates artifacts such as dark streaks. We show this artifact is not always due to beam hardening. It may appear when scanning samples with high-Z elements inside a low-Z matrix because of the high-Z element absorption edge: X-rays whose energy is above this edge are strongly absorbed, violating the exponential decay assumption for reconstruction algorithms and generating dark streaks. A method is proposed to limit the absorption edge effect and is applied on a microelectronic case to suppress dark streaks between interconnections.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A high-damping magnetorheological elastomer with bi-directional magnetic-control modulus for potential application in seismology

A high-damping magnetorheological elastomer (MRE) with bi-directional magnetic-control modulus is developed. This MRE was synthesized by filling NdFeB particles into polyurethane (PU)/ epoxy (EP) interpenetrating network (IPN) structure. The anisotropic samples were prepared in a permanent magnetic field and magnetized in an electromagnetic field of 1 T. Dynamic mechanical responses of the MRE to applied magnetic fields are investigated through magneto-rheometer, and morphology of MREs is observed via scanning electron microscope (SEM). Test result indicates that when the test field orientation is parallel to that of the sample's magnetization, the shear modulus of sample increases. On the other hand, when the orientation is opposite to that of the sample's magnetization, shear modulus decreases. In addition, this PU/EP IPN matrix based MRE has a high-damping property, with high loss factor and can be controlled by applying magnetic field. It is expected that the high damping property and the ability of bi-directional magnetic-control modulus of this MRE offer promising advantages in seismologic application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accelerating LHC event generation with simplified pilot runs and fast PDFs

High-precision calculations are an indispensable ingredient for the success of the LHC physics programme, yet their poor computing efficiency has been a growing cause for concern, threatening to become a paralysing bottleneck in the coming years. We present solutions to eliminate the apprehension by focussing on two major components of generalpurpose Monte Carlo event generators: the evaluation of parton distribution functions, and the generation of perturbative matrix elements. We show that for the cost-driving event samples employed by the ATLAS experiment to model omnipresent, irreducible Standard Model backgrounds, such as weak boson or top-quark pair production in association with jets, these computational components dominate the overall run time by up to 80 %. We demonstrate that a reduction of the computing footprint of LHAPDF and SHERPA by factors of around 40 can be achieved for multi-leg NLO event generation.

Bothmann, Enrico [Gottingen U.]↗

Error-mitigated nonorthogonal quantum eigensolver via shadow tomography

We present a shadow-tomography-enhanced nonorthogonal quantum eigensolver (NOQE) for more efficient and accurate electronic structure calculations on near-term quantum devices. By integrating shadow tomography into the NOQE, the measurement cost scales linearly rather than quadratically with the number of reference states, while also reducing the required qubits and circuit depth by half. This approach enables extraction of all matrix elements via randomized measurements and classical postprocessing. We analyze its sample complexity and show that, for small systems, it remains constant in the high-precision regime, while for larger systems, it scales linearly with the system size. We further apply shadow-based error mitigation to suppress noise-induced bias without increasing quantum resources. Demonstrations on the hydrogen molecule in the strongly correlated regime achieve chemical accuracy under realistic noise, showing that our method is both resource-efficient and noise-resilient for practical quantum chemistry simulations in the near term.

quantum algorithms & computation↗