Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Tuning Edge Localized Spin Waves in Magnetic Microstripes by Proximate Magnetic Structures.

The propagation of edge localized spin waves (E-SWs) in yttrium iron garnet (YIG; Y3Fe5O12) microstripes with and without magnetic microstructures in close proximity is investigated by micromagnetic simulations. A splitting of the dispersion curve with the presence of permalloy (Py; Ni81Fe19) stripe is observed. The results show that E-SWs on the two edges of YIG stripe have different wavelengths, group velocities, and decay lengths at the same frequencies. The role of the Py stripe was found to be the source of the inhomogeneous static dipolar field without dynamic coupling with YIG. This work opens new perspectives for the design of innovative spin wave interference-based logic devices.

Zhang, Zhizhi↗

Intrinsic electrostatic effects in nanostructured ceramics

Using atomic-level calculations with empirical potentials, we have found that electrostatic dipoles can be created at grain boundaries formed from nonpolar surfaces of fluorite-structured materials. In particular, the SIGMA5(310)/[001] symmetric tilt grain boundary reconstructs to break the symmetry in the atomic structure at the boundary, forming the dipole. This dipole results in an abrupt change in electrostatic potential across the boundary. In multilayered ceramics composed of stacks of grain boundaries, the change in electrostatic potential at the boundary results in profound electrostatic effects within the crystalline layers, the nature of which depends on the electrical boundary conditions. For open-circuit boundary conditions, layers with either high or low electrostatic potential are formed. By contrast, for short-circuit boundary conditions, electric fields can be created within each layer, the strength of which then depend on the thickness of the layers. These electrostatic effects have important consequences for the behavior of defects and dopants within these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Niobium hydride formation in superconducting qubit thin films

The formation of nonsuperconducting hydrides in 160–170-nm-thick films of niobium is examined. We identify six elastically distinct orientation relationships ɛ−Nb 4 ⁢H 3 takes within the matrix, solid-solution 𝛼−NbH 𝑥 phase. We employ a phase field model to assess the impact of elastic energy induced by the strain of phase transformation on the morphology and transformation dynamics of ɛ precipitates within a thin film. We consider the dimensions of the thin film, crystallographic growth direction, and diffusion rates to predict the timescale of hydride evolution. Leveraging the finite element method, we predict two-dimensional and three-dimensional equilibrium shapes of ɛ-hydrides within a bulk sample and in a thin film that has a traction-free surface. Our results suggest that niobium hydrides migrate to the free surface of the film. Precipitates which reach the free surface coarsen, while precipitates within the film dissolve. Precipitates in both two dimensions and three dimensions experience a repulsive interaction force at the free surface, that is attractive in the bulk, shown in experiment and theory of previous studies.

36 - MATERIALS SCIENCE↗

Bifunctionally Graded Electrode Supported SOFC Modeling and Computational Thermal Fluid Analysis for Experimental Design

A comprehensive 3D computational fluid dynamics (CFD) model is developed for a bi-electrode supported cell (BSC) solid oxide fuel cell (SOFC). The model includes complicated transport phenomena of mass/heat transfer, charge (electron and ion) migration, and electrochemical reactions. The uniqueness of the modeling study is that functionally graded porous electrode property is taken into account, including not only linear but also nonlinear porosity distributions. The model is validated using experimental data from open literature. Numerical results indicate that BSC performance is strongly dependent on both operating conditions and porous microstructure distributions of electrodes. Using the proposed fuel/gas feeding design, the uniform hydrogen distribution within the porous anode is achieved; the oxygen distribution within the cathode is dependent on porous microstructure distributions as well as pressure loss conditions. Simulation results also show that fairly uniform temperature distribution can be obtained with the proposed fuel/gas feeding design. This modeling work can provide a pre-experimental analysis and guide experimental designs for BSC test.

carbon sequestration↗

Latent Pitfalls in Microstructure-Based Modeling for Thermally Aged 9Cr-1Mo-V Steel (Grade 91)

A case study was conducted on a mechanistic model development that predicted tensile strength deterioration with thermal aging of 9Cr-1Mo-V steel in supporting the 60-year design life expected for advanced nuclear reactors. For property prediction beyond practical testing times, mechanistic modeling is highly desired, as it taps into the physics of structure–property relationships and therefore can generate reliable results for extrapolation. Meanwhile, as mechanistic models are often complicated, reflecting the intricacy of microstructure and strengthening mechanisms, pitfalls that are difficult to detect often exist. Here, this paper discusses latent pitfalls that are common in mechanistic modeling or specific in this 9Cr-1Mo-V case development through using the American Society of Mechanical Engineers verification and validation in computational solid mechanics (ASME V&V 10) standard for evaluating credibility of modeling in materials engineering. Suggestions are also made for enhancing reliability of microstructure-based modeling.

36 MATERIALS SCIENCE↗

Processing and mechanical properties - 2016-0032

Hot extrusion is used within the forming route of cladding tubes to deform the billets into tube hollows, which are then cold-rolled to produce the final tubes with the suitable properties for in-reactor use. The hot extrusion goals are to give the appropriate geometry for cold pilgering (diameter and wall thickness suitable for cold-rolling mills, good concentricity) without surface defects and microstructural heterogeneities, which are detrimental for subsequent rolling. To ensure a good quality of the tube hollows, extrusion parameters (e.g., temperature of the billet, ram speed, extrusion ratio, lubrication) and extrusion tools have to be chosen as a function of the press capacity and mechanical and microstructural properties of the extruded alloy. For this purpose, finite-element and analytical models are used in addition to experimental tests. These models, particularly the former, can take into account the thermomechanical coupling that occurs in the tube and the tools during extrusion and provides a good prediction of the extrusion pressure and thermomechanical history of the extruded product. Together with a microstructural evolution model identified with small-scale extrusion tests, torsion tests, and heat treatments, this last result can also be used to calculate the fragmentation of the microstructure in the die and the meta-dynamic recrystallization after extrusion. Once validated against experimental data, numerical models were used to better understand and master the extrusion loads, the microstructure evolutions at the front end of the extruded tubes, and the temperature and stresses applied to the tools. (authors)

36 MATERIALS SCIENCE↗

Evaluation of Ceramic Foams and Simulated Reentry Environments

NASA and Ames is conducting ongoing research in lower density reusable TPS material for future reentry vehicles. Ceramic foams from pre ceramic polymer routes have potential for use in both acreage TPS and as tile leading edges for reentry vehicles. One of the key factors to investigate, when developing new materials for reentry applications, is their oxidation behavior in the appropriate reentry environment whrch can be simulated using ground based arc jet (plasma jet) testing. Studies have shown that oxidation rates of materials will differ when exposed to either monatomatic or molecular oxygen and the amount of monoatomic oxygen depends on the conditions particular to a given test situation. Monoatomic oxygen is always present in reentry environment, therefore arc jet testing is required to provide the appropriate conditions (stagnation pressures, heat fluxes, enthalpies, heat loads and atmospheres) encountered during flight. This preliminary work looks at the response of ceramic foams (Si systems) exposed to simulated reentry environments and investigates the influence of microstructure and composition on the materials response.

Stackpoole, Mairead↗

Ceramic Foams for TPS Applications

Ceramic foams have potential in many areas of Thermal Protection Systems (TPS) including acreage and tile leading edges as well as being suitable as a repair approach for re-entry vehicles. NASA Ames is conducting ongoing research in developing lower-density foams from pre-ceramic polymer routes. One of the key factors to investigate, when developing new materials for re-entry applications, is their oxidation behavior in the appropriate re-entry environment which can be simulated using ground based arc jet (plasma jet) testing. Arc jet testing is required to provide the appropriate conditions (stagnation pressures, heat fluxes, enthalpies, heat loads and atmospheres) encountered during flight. This work looks at the response of ceramic foams (Si systems) exposed to simulated reentry environments and investigates the influence of microstructure and composition on the material? response. Other foam properties (mechanical and thermal) will also be presented.

Stockpoole, Mairead↗

NASA's Nuclear Thermal Propulsion Project

Space fission power systems can provide a power rich environment anywhere in the solar system, independent of available sunlight. Space fission propulsion offers the potential for enabling rapid, affordable access to any point in the solar system. One type of space fission propulsion is Nuclear Thermal Propulsion (NTP). NTP systems operate by using a fission reactor to heat hydrogen to very high temperature (>2500 K) and expanding the hot hydrogen through a supersonic nozzle. First generation NTP systems are designed to have an Isp of approximately 900 s. The high Isp of NTP enables rapid crew transfer to destinations such as Mars, and can also help reduce mission cost, improve logistics (fewer launches), and provide other benefits. However, for NTP systems to be utilized they must be affordable and viable to develop. NASA's Advanced Exploration Systems (AES) NTP project is a technology development project that will help assess the affordability and viability of NTP. Early work has included fabrication of representative graphite composite fuel element segments, coating of representative graphite composite fuel element segments, fabrication of representative cermet fuel element segments, and testing of fuel element segments in the Compact Fuel Element Environmental Tester (CFEET). Near-term activities will include testing approximately 16" fuel element segments in the Nuclear Thermal Rocket Element Environmental Simulator (NTREES), and ongoing research into improving fuel microstructure and coatings. In addition to recapturing fuels technology, affordable development, qualification, and utilization strategies must be devised. Options such as using low-enriched uranium (LEU) instead of highly-enriched uranium (HEU) are being assessed, although that option requires development of a key technology before it can be applied to NTP in the thrust range of interest. Ground test facilities will be required, especially if NTP is to be used in conjunction with high value or crewed missions. There are potential options for either modifying existing facilities or constructing new ground test facilities. At least three potential options exist for reducing (or eliminating) the release of radioactivity into the environment during ground testing. These include fully containing the NTP exhaust during the ground test, scrubbing the exhaust, or utilizing an existing borehole at the Nevada National Security Site (NNSS) to filter the exhaust. Finally, the project is considering the potential for an early flight demonstration of an engine very similar to one that could be used to support human Mars or other ambitious missions. The flight demonstration could be an important step towards the eventual utilization of NTP.

Houts, Michael↗

Proposed Laser-driven, Dielectric Microstructure Few-cm Long Undulator for Attosecond Coherent X-rays

This article presents the concept of an all-dielectric laser-driven undulator for the generation of coherent X-rays. The proposed laser-driven undulator is expected to produce internal deflection forces equivalent to a several-Tesla magnetic field acting on a speed-of-light particle. The key idea for this laser-driven undulator is its ability to provide phase synchronicity between the deflection force and the electron beam for a distance that is much greater than the laser wavelength. The potential advantage of this undulator is illustrated with a possible design example that assumes a small laser accelerator which delivers a 2 GeV, 1 pC, 1 kHz electron bunch train to a 10 cm long, 1/2 mm period laser-driven undulator. Such an undulator could produce coherent X-ray pulses with {approx}10{sup 9} photons of 64 keV energy. The numerical modeling for the expected X-ray pulse shape was performed with GENESIS, which predicts X-ray pulse durations in the few-attosecond range. Possible applications for nonlinear electromagnetic effects from these X-ray pulses are briefly discussed.

36 MATERIALS SCIENCE↗

Spatially Resolved Polarization Switching near a Planar Defect by Design: Mesoscopic Mechanisms at Tilt Grain Boundary in Bismuth Ferrite

The effect of microstructure on ferroelectric domain nucleation in epitaxial bismuth ferrite was probed at a single atomically-defined defect: an artificially fabricated model bicrystal grain boundary (GB). Switching Spectroscopy Piezoresponse Force Microscopy is used to map the variation of local hysteresis loops at the grain boundary and its immediate vicinity. We found the influence of the GB on nucleation to be relatively weak, resulting in a slight shift of the negative nucleation bias to higher (negative) voltages. The mesoscopic mechanisms of grain boundary effect on local polarization switching are studied in detail using phase field modeling, elucidating the complex mechanisms governed by the interplay between ferroelectric and ferroelastic wall energies, depolarization fields, and interface charge. The combination of phase field modeling and SS-PFM allows quantitative analysis of mesoscopic mechanisms for polarization switching, and hence suggests a route for optimizing materials properties through microstructure optimization.

36 MATERIALS SCIENCE↗

Multiscale Modeling of Accident Tolerant Fuels under the NEAMS ATF Program

The U.S. Department of Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has been developing computational analysis tools for nuclear fuel simulation. These codes include BISON and Marmot for investigation of fuel behavior at the continuum and microstructural scales, respectively. In 2014, NEAMS introduced what it calls High Impact Problems (HIPs) into its development plan. These HIPs are intended to make significant advancements in a particular area of nuclear power research in a short period of time (3 years or less). NEAMS has chosen an accident tolerant fuel (ATF) project, which emphasizes utilizing BISON and Marmot to model proposed materials, as its first HIP. Since the events that occurred at the Fukushima-Daiichi nuclear power plant in 2011, the U.S. Department of Energy's Office of Nuclear Energy accelerated research in nuclear fuel concepts with enhanced accident tolerance as part of its Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC). Accident tolerant fuels are expected to perform at least as well as conventional fuel during normal conditions and provide significantly increased response time in the event of an accident. Given the many unknowns associated with proposed ATF concepts, the research and development being undertaken by AFC in this area is a challenge, particularly considering the desire to have a lead test rod or assembly in a commercial plant by 2022. With the AFC as its primary stakeholder, the NEAMS ATF HIP is developing material models (using a multi-scale approach) for multiple candidate materials. Through a variety of analyses employing these models, the ATF HIP is providing insight and support to the AFC as it strives to understand these materials and prioritize further development. Use of computational tools such as BISON and Marmot are a vital component of the AFC's strategy since experimental data will not be available broadly and quickly enough to understand the proposed materials fully by the time the AFC must make further development decisions. This summary reviews the overall approach of the NEAMS ATF HIP. First, we give an overview of the current materials chosen for investigation. We also review the overall multi-scale approach to model development. We briefly review the work underway at multiple national laboratories to develop mechanistic engineering scale models based on lower length scale insight. Note that coordinated work is also underway at multiple universities, but those efforts are not detailed here. The NEAMS ATF HIP is assisting the AFC in assessing two accident tolerant materials, uranium silicide fuel and FeCrAl cladding. A multi-scale material model development approach is being undertaken to formulate the models necessary to investigate the materials over a range of normal and off-normal scenarios. This approach includes molecular dynamics, density functional theory, mesoscale modeling, and engineering scale modeling. Sensitivity studies are underway to understand the most critical scenarios and material model input parameters. The information generated is being given to the AFC for their use in selecting promising ATF concepts. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recent Advances in Analytical Electron Microscopy for Irradiated Materials

Analytical electron microscopy (AEM) in the scanning transmission electron microscope (STEM) has long been a staple of post-irradiation examination (PIE) and materials development campaigns. Recently, new advances in both STEM hardware and post-processing data-analysis software, along with ancillary advances such as in focused ion beam (FIB) sample preparation, has led to exciting advances in the quantity and quality of data that can be obtained. This talk will summarize recent experiments performed at Oak Ridge National Laboratory (ORNL), especially work on neutron-irradiated materials and fuels taking advantage of a newly-installed latest-generation AEM tool in the ORNL irradiated materials laboratories. ORNL installed a new FEI Talos F200X microscope, a 200 keV, high-brightness Schottky emission AEM system optimized for high-speed, high-efficiency X-ray mapping experiments. The F200X features the FEI 'SuperX' four-sector silicon drift detector (SDD) X-ray detector, which provides 0.9 sr solid angle of collection. By combining the high-brightness electron source, latest-generation electron optics, and fast computers and pulse processors, X-ray mapping speed is increased by a factor of 50-100 x compared to the previous-generation instruments. In addition to improvements in hardware, data mining via multivariate statistical analysis (MVSA) allows for maximum insight to the data obtained from the new hardware. MVSA data mining of the X-ray maps allows, for instance, unbiased computational identification of the phases present, and discovery of small phases or precipitates not expected by the human analyst. This talk will present examples of experiments performed using the most modern AEM tools and software. Silicon carbide is a major candidate for next-generation nuclear applications. Nano-infiltration by transient eutectic (NITE) SiC requires low sintering temperatures. X-ray mapping of the NITE structure find pockets of different oxides, such as Zr-Y-oxide, Y-Al-oxide, and yttria. MVSA data mining finds the regions where different oxides are present and indicates that Y additions preferentially wet grain boundaries, where Zr additions are preferentially concentrated at grain triple points. SiC coatings from AGR-I experiment TRISO particles were found to contain significant quantities of fission products (e.g., Pd) as well as actinides (U, Pu). MVSA data mining found complex precipitates and grain boundary films of the fission products and actinides deep (∼several microns) into the SiC layer. Advanced AEM methods, combined with MVSA data mining, makes possible both rapid and detailed PIE. Ferritic alloys, such as accident-tolerant FeCrAl grades, benefit greatly from advanced AEM examination. Neutron-irradiated FeCrAl precipitates the detrimental Cr-rich α' phase. Because the SuperX SDD system has four detectors, it is possible to obtain high X-ray count rates even on a highly tilted specimen, as might be needed to obtain STEM images of dislocation loops. Results on neutron-irradiated FeCrAl indicates that α' size and number density can be obtained by AEM, and MVSA results determine that minor elements (such as Si) has complex radiation-induced segregation behavior at grain boundaries. We have also developed and validated computer models of the AEM experiment, allowing different microstructures' X-ray map results to be simulated for different STEM instruments. This allows X-ray mapping to be more quantitative, such as by estimating what size nanoclusters in an oxide-dispersion strengthened steel would be visible or invisible in STEM. In summary, new advanced AEM technology provides a major leap forward in experiments possible in PIE of irradiated materials. (authors)

36 MATERIALS SCIENCE↗

MARMOT Modeling of Microstructure-Dependent Thermal Conductivity in Nuclear Fuels

Uranium dioxide (UO{sub 2}) is the primary nuclear fuel in light water reactors. The thermal conductivity of UO{sub 2} is an important fuel performance metric as it affects nuclear energy conversion efficiency and safety. Unfortunately UO{sub 2} has a very low thermal conductivity, even in the single crystal form. In reactor environment, the radiation-induced defects, fission products, and complex microstructural evolution degrade the thermal conductivity of UO{sub 2} significantly. These defects and microstructures in UO{sub 2} fuels include point defects, gas bubbles, metallic precipitates, etc.. In the rim region of a fuel pellet, high burnup structure also forms which contains many nanograins and thus high density of grain boundaries. Therefore, understanding how different irradiation-induced microstructures affect the thermal conductivity in nuclear fuels is important for predicting the overall thermal transport properties in nuclear fuels. In this work, the unit effect of each microstructure on the thermal conductivity of UO{sub 2} is evaluated, using grain boundary as an example. The obtained unit mechanism can be used as input for the multiplier model that describes the combined effect of various microstructures. In this work we use phase field simulations coupled with heat conduction calculations to study the co-evolution of grain size and thermal conductivity. The simulation data are used to calibrate an analytical model. Based on the sufficient statistics from simulations, we conclude that the analytical model can well predict the grain-size-dependent thermal conductivity over a wide range of grain sizes if the input parameters are calibrated. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-Throughput Ion Irradiation and Microstructural Characterization of Multi-Principal-Element Alloys

Multi-principal-element alloys (MPEAs) have garnered interest in the nuclear community for their apparent resistance to microstructural damage under irradiation. While both experimentation and simulation have demonstrated reduced hardening and void swelling in MPEAs, the relationship between composition and irradiation response is still poorly understood since a rich experimental database for MPEAs does not yet exist. In this work, to accelerate the generation of experimental irradiation-response data for MPEAs, high-throughput synthesis, irradiation, and characterization techniques have been employed. Specifically, additive manufacturing has been used to produce arrays of various MPEAs (1-cm2 coupons), which have been subsequently irradiated using 4-MeV Ni2+ ions to a peak damage of 200 dpa at 500 °C. Hardening and void swelling have been assessed using nanoindentation and trenching via plasma focused ion beam (PFIB), respectively. Trends in the experimental data relating hardening and void swelling behavior to composition have been analyzed using different machine learning approaches.

36 MATERIALS SCIENCE↗

Multi analysis of the effect of grain size on the dynamic behavior of microalloyed steels

This study presents some aspects of multiscale analysis and modeling of variously structured materials behavior in quasi-static and dynamic loading conditions. The investigation was performed for two different materials of common application: high strength microalloyed steel (HSLA, X65), and as a reference more ductile material, Ti-IF steel. The MaxStrain technique and one pass hot rolling processes were used to produce ultrafine-grained and coarse-grained materials. The efficiency and inhomogeneity of microstructure refinement were examined because of their important role in work hardening and the initiation and growth of fracture under tensile stresses. It is shown that the combination of microstructures characterized by their different features contributes to the dynamic behavior and final properties of the product. In particular, the role of solute segregation at grain boundaries as well as precipitation of carbonitrides in coarse and ultrafine-grained structures is assessed. The predicted mechanical response of ultrafine-grained structures, using modified KHL model is in reasonable agreement with the experiments. This is a result of proper representation of the role of dislocation structure and the grain boundary and their multiscale effects included in this model.

36 MATERIALS SCIENCE↗

Statistics of high purity nickel microstructure from high energy x-ray diffraction microscopy.

We have measured and reconstructed via forward modeling a small volume of microstructure of high purity, well annealed nickel using high energy xray diffraction microscopy (HEDM). Statistical distributions characterizing grain orientations, intra-granular misorientations, and nearest neighbor grain misorientations are extracted. Results are consistent with recent electron backscatter diffraction measurements. Peaks in the grain neighbor misorientation angle distribution at 60 degrees (S3) and 39 degrees (S9) have resolution limited widths of {approx}0:14 degree FWHM. The analysis demonstrates that HEDM can recover grain and grain boundary statistics comparable to OIM volume measurements; more extensive data sets will lead to full, five parameter grain boundary character distributions. Due to its non-destructive nature, HEDM can then watch, both statistically and through tracking of individual grains and boundaries, the evolution of such distributions with processing of the sample.

36 MATERIALS SCIENCE↗

Helium causing disappearance of a/2<111> dislocation loops in binary Fe-Cr ferritic alloys

In this work, single and dual-beam self-ion irradiations were performed at 500°C on ultra-high purity Fe14%Cr alloy to ~0.33 displacements-per-atom (dpa), and 0 or 3030 atomic-parts-per-million (appm) helium/dpa, respectively. Using transmission electron microscopy, we reveal that helium can drastically modify the dislocation loop Burgers vector in Fe-Cr alloys. Helium co-implantation caused complete disappearance of a/2<111> type dislocation loops, and the microstructure consisted of only a<100> loops. Conversely, a/2<111> type loops were predominant without He co-implantation. The total loop density remained largely unaffected. The results strikingly contrast literature asserting that helium stabilizes a/2<111> type loops in bcc Fe alloys, based on low temperature irradiations. Collectively analyzing the results with literature suggest that the small positive interaction between helium and self-interstitial atoms (SIA) in Fe predicted by atomistic simulations maybe insufficient to holistically explain the dislocation loop microstructure development in presence of helium. Helium-SIA positive binding inadvertently implies elevated a/2<111> loop fraction and higher loop densities that the present results contradict. Helium induced high cavity density causing a preferential loss of highly glissile <111> clusters, leaving the matrix saturated with <100> type clusters is proposed as a potential mechanism. Further, the in-situ irradiations combined with Burgers vector analysis strengthened the evidence of Cr-induced dislocation loop mobility reduction that appears to stabilize the a/2<111> type loops and causes higher loop densities in Fe-Cr alloys.

36 MATERIALS SCIENCE↗