Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The role of buffer layer between TCO and p-layer in improving series resistance and carrier recombination of a-Si:H solar cells

The properties of the window layer and transparent conducting oxide (TCO)/p interface in silicon based thin-film solar cells are important factors in determining the cell efficiency. As the potential barrier got larger at the interface, the transmission of photo-generated holes were impeded and the recombination of photo-generated electrons diffusing back toward the TCO interface were enhanced leading to a deterioration of the fill factor. In this paper different p-layers were studied. It was found that using p-type hydrogenated amorphous silicon oxide (a-SiO{sub x}:H) layer as the window layer along with a 5 nm buffer layer which reduced the barrier at the fluorine doped tin oxide (SnO{sub 2}:F) TCO/p-layer interface, improved the cell efficiency. a-SiO{sub x}:H was used as the buffer layer. With the buffer layer between TCO and p-type a-SiO{sub x}:H, the potential barrier dropped from 0.506 eV to 0.472 eV. This lowered barrier results in increased short circuit current density (J{sub sc}) and fill factor (FF). With the buffer layer, J{sub sc} increased from 11.9 mA/cm{sup 2} to 13.35 mA/cm{sup 2} and FF increased from 73.22% to 74.91%.

36 MATERIALS SCIENCE↗

Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

A key problem in producing mid-infrared optoelectronic and low-power electronic devices in the GaSb material system is the lack of substrates with appropriate surfaces for epitaxial growth. Chemical mechanical polishing (CMP) of GaSb results in surface damage accompanied by tenacious oxides that do not easily desorb. To overcome this, we have developed a process using gas cluster ion beams (GCIB) to remove surface damage and produce engineered surface oxides. In this paper, we present surface modification results on GaSb substrates using O2-, CF4/O2-, and HBr-GCIB processes. X-ray photoelectron spectroscopy of GCIB produced surface layers showed the presence of mixed Ga- and Sb-oxides, with mostly Ga-oxides at the interface, desorbing at temperatures ranging 530°C to 560°C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that GCIB surfaces yielded smooth defect free substrate to epi transitions as compared to CMP surfaces. Furthermore, HBr-GCIB surfaces exhibited neither dislocation layers nor discernable interfaces, indicating complete oxide desorbtion prior to epigrowth on a clean single crystal template. Atomic force microscopy of GCIB epilayers exhibited smooth surfaces with characteristic step-terrace formations comprising monatomic steps and wide terraces. The HBr-GCIB process can be easily adapted to a large scale manufacturing process for epi-ready GaSb.

36 MATERIALS SCIENCE↗

Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

A key problem in producing mid-infrared optoelectronic and low-power electronic devices in the GaSb material system is the lack of substrates with appropriate surfaces for epitaxial growth. Chemical mechanical polishing (CMP) of GaSb results in surface damage accompanied by tenacious oxides that do not easily desorb. To overcome this, we have developed a process using gas cluster ion beams (GCIB) to remove surface damage and produce engineered surface oxides. In this paper, we present surface modification results on GaSb substrates using O2-, CF4/O2-, and HBr-GCIB processes. X-ray photoelectron spectroscopy of GCIB produced surface layers showed the presence of mixed Ga- and Sb-oxides, with mostly Ga-oxides at the interface, desorbing at temperatures ranging 530°C to 560°C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that GCIB surfaces yielded smooth defect free substrate to epi transitions as compared to CMP surfaces. Furthermore, HBr-GCIB surfaces exhibited neither dislocation layers nor discernable interfaces, indicating complete oxide desorbtion prior to epigrowth on a clean single crystal template. Atomic force microscopy of GCIB epilayers exhibited smooth surfaces with characteristic step-terrace formations comprising monatomic steps and wide terraces. The HBr-GCIB process can be easily adapted to a large scale manufacturing process for epi-ready GaSb.

36 MATERIALS SCIENCE↗

The General Isothermal Oxidation Behavior of Cu-8Cr-4Nb

Oxidation kinetics of Cu-8Cr-4Nb was investigated by TGA (thermogravimetric) exposures between 500 and 900-C (at 25-50 C intervals) and the oxide scale morphologies examined by microscopy and micro-analysis. Because Cu-8Cr-4Nb is comprised of fine Cr2Nb precipitates in a Cu matrix, the results were interpreted by comparison with the behavior of copper (OFHC) and 'NARloy-Z' (a rival candidate material for thrust cell liner applications in advanced rocket engines) under the same conditions. While NARloy-Z and Cu exhibited identical oxidation behavior, Cu-8Cr-4Nb differed markedly in several respects: below approx. 700 C its oxidation rates were significantly lower than those of Cu; At higher temperatures its oxidation rates fell into two categories: an initial rate exceeding that of Cu, and a terminal rate comparable to that of Cu. Differences in oxide morphologies paralleled the kinetic differences at higher temperature: While NARloy-Z and Cu produced a uniform oxide scale of Cu2O inner layer and CuO outer layer, the inner (Cu2O) layer on Cu-8Cr-4Nb was stratified, with a highly porous/spongy inner stratum (responsible for the fast initial kinetics) and a dense/blocky outer stratum (corresponding to the slow terminal kinetics). Single and spinel oxides of Nb and Cr were found at the interface between the oxide scale and Cu-8Cr-4Nb substrate and it appears that these oxides were responsible for its suppressed oxidation rates at the intermediate temperatures. No difference was found between Cu-8Cr-4Nb oxidation in air and in oxygen at 1.0 atm.

Thomas-Ogbuji, L. U.↗

Interface engineering for a rational design of poison-free bimetallic CO oxidation catalysts

We use density functional theory calculations of Pt@Cu core@shell nanoparticles (NPs) to design bifunctional poison-free CO oxidation catalysts. By calculating the adsorption chemistry under CO oxidation conditions, we find that the Pt@Cu NPs will be active for CO oxidation with resistance to CO-poisoning. The CO oxidation pathway at the Pt–Cu interface is determined on the Pt NP covered with a full- and partial-shell of Cu. The exposed portion of the Pt core preferentially binds CO and the Cu shell binds O2, supplying oxygen for the reaction. The Pt–Cu interface provides CO-oxidation sites that are not poisoned by either CO or O2. Additional computational screening shows that this separation of reactant binding sites is possible for several other core@shell NPs. Our results indicate that the metal–metal interface within a single NP can be optimized for design of bifunctional catalytic systems with improved performance.

Shin, Kihyun↗

Torque magnetometry of an amorphous-alumina/strontium-titanate interface

Here, we report torque magnetometry measurements of an oxide heterostructure consisting of an amorphous Al 2 O 3 thin film grown on a crystalline SrTiO 3 substrate (α -AO/STO) by atomic layer deposition. We find a torque response that resembles previous studies of crystalline LaAlO 3 /SrTiO 3 (LAO/STO) heterointerfaces, consistent with strongly anisotropic magnetic ordering in the plane of the interface. Unlike crystalline LAO, amorphous Al 2 O 3 is nonpolar, indicating that planar magnetism at an oxide interface is possible without the strong internal electric fields generated within the polarization catastrophe model. We discuss our results in the context of current theoretical efforts to explain magnetism in crystalline LAO/STO.

36 MATERIALS SCIENCE↗

Changes in Reactivity as Chemistry Becomes Confined to an Interface. The Case of Free Radical Oxidation of C 30 H 62 Alkane by OH

Here, we examine in a simple organic aerosol the transition between heterogeneous chemistry under well-mixed conditions to chemistry under interfacial confinement. A single reaction mechanism, shown to reproduce observed OH oxidation chemistry for liquid and semisolid C 30 H 62 , is used in reaction-diffusion simulations to explore reactivity over a broad viscosity range. The results show that when internal mixing of the aerosol is fast and the particle interface is enriched in C-H groups, ketone and alcohol products, formed via peroxy radical disproportionation, predominate. As viscosity increases the reactions become confined to a shell at the gas-aerosol interface. The confinement is accompanied by emergence of acyloxy reaction pathways that are particularly active when the shell is 1 nm or less. We quantify this trend using a reaction-diffusion index, allowing the parts of the mechanism that control reactivity as viscosity increases to be identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive ZnO/Ti/ZnO interfaces studied by hard x-ray photoelectron spectroscopy

The chemistry and intermixing at buried interfaces in sputter deposited ZnO/Ti/ZnO thin layers were studied by hard x-ray photoelectron spectroscopy. The long mean free path of the photoelectrons allowed for detailed studies of the oxidation state, band bending effects, and intrinsic doping of the buried interfaces. Oxidation of the Ti layer was observed when ZnO was deposited on top. When Ti is deposited onto ZnO, Zn Auger peaks acquire a metallic character indicating a strong reduction of ZnO at the interface. Annealing of the stack at 200 °C results in further reduction of ZnO and oxidation of Ti. Above 300 °C, oxygen transport from the bulk of the ZnO layer takes place, leading to re-oxidation of ZnO at the interface and further oxidation of Ti layer. Heating above 500 °C leads to an intermixing of the layers and the formation of a Zn{sub x}TiO{sub y} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and Oxidation of a MAX Phase/Superalloy Hybrid Interface

Corrosion resistant, strain tolerant MAX phase coatings are of interest for turbine applications. Thin Cr2AlC MAX phase wafers were vacuum diffusion bonded to an advanced turbine disk alloy, LSHR, at 1100 C. The interface, examined by optical and scanning electron microscopy, revealed a primary diffusion zone consisting of ~ 10 micrometers of beta-Ni(Co)Al, decorated with various NiCoCrAl, MC and M3B2 precipitates. On the Cr2AlC side, an additional ~40 micrometers Al-depletion zone of Cr7C3 formed in an interconnected network with the beta-Ni(Co)Al. Oxidation of an exposed edge at 800 C for 100 h produced a fine-grained lenticular alumina scale over Cr2AlC and beta-Ni(Co)Al, with coarser chromia granules over the Cr7C3 regions. Subsequent growth of the diffusion layers was only ~ 5 micrometers in total. A residual stress of ~ 500 MPa was estimated for the MAX phase layer, but no interfacial damage was observed. Subsequent tests for 1000 h reveal similar results.

heat resistant alloys↗

Structural Evolution of a Ni Alloy Surface During High-Temperature Oxidation

We show that considerable structural transformations occur at a Ni alloy surface during the transient stages of high-temperature oxidation. This was demonstrated by exposing the alloy to high-temperature CO 2 for short times at both atmospheric and supercritical pressures. A protective Cr-rich oxide layer formed after only 5 min at 700 °C and persisted for longer exposures up to 500 h. Voids formed and grew over time by the condensation of metal vacancies generated during oxidation, while the alloy surface recrystallized after sufficient oxidation had occurred. The oxygen potential established at the oxide/alloy interface led to oxidation along the newly formed grain boundaries as well as adjacent to and inside of the voids. Al, the most stable oxide-former and present at low concentration in the alloy, was preferentially oxidized in these regions. Furthermore, the results provide an improved understanding of the internal oxidation of Al and its role in enhancing scale adhesion for this class of Ni alloys.

20 FOSSIL-FUELED POWER PLANTS↗

Novel concept of functional oxide coatings providing enhanced oxidation resistance to Ni-based superalloys

Graphical abstract: - Highlights: • New concept for providing extended oxidation resistance to Ni-based superalloys. • Oxygen-defective nanostructured oxide coatings reduce the oxygen partial pressure at the substrate interface. • Pre-oxidation of the substrate during annealing with the formation of alpha-alumina. • Growth of CeAlO{sub 3} perovskite enhancing the adherence of the ceria top coat. • Microstructural stability of the coating system with no SRZ formation upon exposure. - Abstract: Aluminide-coated Ni-based superalloys are prone to microstructural instabilities during long-term exposure at high temperature with the growth of a secondary reaction zone (SRZ) detrimental from a mechanical viewpoint. This has been since overcome by the use of thermodynamically stable coatings (γ-Ni/γ′-Ni{sub 3}Al). However, additions of Pt and Hf are required to provide the formation of an exclusive α-Al{sub 2}O{sub 3} scale and improved oxidation resistance in cyclic and isothermal regimes. The present work proposes a new coating system that relies on the use of a superficial nanostructured functional oxide providing the establishment of a stable alumina while avoiding SRZ formation. Tailored oxygen-defective and multi-cracked coatings were designed for 2nd generation Ni-based superalloys and generated by electrosynthesis using a water-based solution. Cyclic oxidation tests were carried out at 1100 °C in air and the oxidation properties and the microstructural stability of the coating system were demonstrated.

36 MATERIALS SCIENCE↗

TaN interface properties and electric field cycling effects on ferroelectric Si-doped HfO{sub 2} thin films

Ferroelectric HfO{sub 2}-based thin films, which can exhibit ferroelectric properties down to sub-10 nm thicknesses, are a promising candidate for emerging high density memory technologies. As the ferroelectric thickness continues to shrink, the electrode-ferroelectric interface properties play an increasingly important role. We investigate the TaN interface properties on 10 nm thick Si-doped HfO{sub 2} thin films fabricated in a TaN metal-ferroelectric-metal stack which exhibit highly asymmetric ferroelectric characteristics. To understand the asymmetric behavior of the ferroelectric characteristics of the Si-doped HfO{sub 2} thin films, the chemical interface properties of sputtered TaN bottom and top electrodes are probed with x-ray photoelectron spectroscopy. Ta-O bonds at the bottom electrode interface and a significant presence of Hf-N bonds at both electrode interfaces are identified. It is shown that the chemical heterogeneity of the bottom and top electrode interfaces gives rise to an internal electric field, which causes the as-grown ferroelectric domains to preferentially polarize to screen positively charged oxygen vacancies aggregated at the oxidized bottom electrode interface. Electric field cycling is shown to reduce the internal electric field with a concomitant increase in remanent polarization and decrease in relative permittivity. Through an analysis of pulsed transient switching currents, back-switching is observed in Si-doped HfO{sub 2} thin films with pinched hysteresis loops and is shown to be influenced by the internal electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Smoothed particle hydrodynamics modeling and analysis of oxide reduction process for uranium oxides

A common kinetic feature for oxide reduction chemical/electrochemical processes is oxygen transport via a porous metallic layer, which has been considered as a rate-determining step for reducing uranium oxides to metallic uranium. Accounting this kinetic behavior must involve the resolution of the moving reactive interface between shrinking oxide and expanding metal phases. This study presents a numerical model using smoothed particles hydrodynamics (SPH) to effectively deal with the evolution of the shrinking core reaction interface and oxygen transport via mass transfer of lithium oxide (Li 2 O) species in multiple mass transfer domains. We successfully validated the proposed model against a theoretical derivation for the oxide reduction process handling a shrinking oxide core with molten salt and metal ash medium on a simple planar geometry. Armed with successful validation results, the model examined a realistic reactant geometry to extend the arguments beyond the one-dimensional analyses, allowing the proposed model to apply to general application scenarios with multi-dimensional geometry. Here, this study demonstrated that the proposed model could simulate and evaluate an arbitrary reaction basket design without iterative experimental trials, which is prohibitive for a scaled high-temperature molten salt study in an inert environment. The construct potentially provides not only deep insights on multiphysics behaviors governing the process dynamics but also a robust framework for evaluating and screening candidate basket designs in the most cost-effective manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reduction of native oxides on InAs by atomic layer deposited Al{sub 2}O{sub 3} and HfO{sub 2}

Thin high-{kappa} oxide films on InAs, formed by atomic layer deposition, are the key to achieve high-speed metal-oxide-semiconductor devices. We have studied the native oxide and the interface between InAs and 2 nm thick Al{sub 2}O{sub 3} or HfO{sub 2} layers using synchrotron x-ray photoemission spectroscopy. Both films lead to a strong oxide reduction, obtaining less than 10% of the native As-oxides and between 10% and 50% of the native In-oxides, depending on the deposition temperature. The ratio of native In- to As-oxides is determined to be 2:1. The exact composition and the influence of different oxidation states and suboxides is discussed in detail.

36 MATERIALS SCIENCE↗

Beyond Coherent Oxide Heterostructures: Atomic-Scale Structure of Misfit Dislocations

Nanoscale design of complex oxide heterostructures and thin films is imperative as they have significant promise in novel technological applications. A coherent interface is formed in oxide heterostructures with small mismatches, and the lattice mismatch is completely compensated by elastic strain. In semi-coherent oxide heterostructures, when an epitaxial layer is grown on the substrate above the critical thickness of the film, misfit dislocations are formed to mitigate the strain between the two materials with dissimilar lattice constants. Key properties of semi-coherent oxide heterostructures are influenced or even controlled by the presence of misfit dislocations. Thus, it is critical to understand the atomic-scale structure of semi-coherent oxide heterostructures, specifically the structure of misfit dislocations that are ubiquitous at such heterointerfaces. Numerous state-of-the-art experiments have reported emergent phenomena at semi-coherent oxide heterostructures, wherein misfit dislocations play a crucial role. Yet, their atomic-scale and nanoscale structure is not always discernable from experiments. Because of large system sizes, computational studies dedicated to examining misfit dislocations in semi-coherent oxide heterostructures are still in their infancy. This review aims to summarize the recent advancements and challenges involved in computational studies elucidating the atomic-scale structure of misfit dislocations in semi-coherent oxide heterostructures and motivate future computational efforts.

74 ATOMIC AND MOLECULAR PHYSICS↗

Challenges in the study of Fe/MgO/Fe interfaces using 3D atom probe

Detailed interface studies were conducted on two Fe/MgO/Fe systems having different thicknesses of MgO layers, using a laser assisted 3D atom probe. In conjunction with a detailed 3D reconstruction, the system exhibited an additional oxide formation at the interface between MgO and Fe of the multilayer structure. This oxide formation was found to be independent of the laser wavelength, laser fluence and the thickness of the intermediate layers. Furthermore, by using numerical simulations of field evaporation of two layers having two different evaporation fields, we discuss the possible oxidation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗