SEARCH · Search NASA

Results for “phase conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Development of Approaches to Model Excited State Charge and Energy Transfer in Solution

The development of next generation energy conversion and catalytic systems requires fundamental understanding of the interplay between photo-excitation and the resulting proton and electron transfer processes that occur in solution. To address these challenges requires accurate and efficient methods to compute ground and excited states, as well as the ability to treat the dynamics of energy transfer in the presence of solvent fluctuations. Our team is developing accurate and efficient theoretical models for solution phase reactions. These developments provide an improved understanding of photo-initiated excitations, electron transfer, and proton coupled electron transfer processes. Our research team brings together expertise in electron and nuclear dynamics (classical and quantum), electronic structure, and analysis of solvation networks. We are developing and validating techniques for modeling condensed phase charge and energy transfer and to simulate the methods to monitor them using optical and vibrational spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2026

Mechanistic Tuning of Chemical Transformations for Coupling the Geo-mimicry of Acid Gas Storage with Design Strategies to Produce Clean Energy Carriers in Multi-Phase Reaction Environments (MATTER) (Final Report)

The need to diversify approaches to produce essential energy carriers such as H 2 motivate advances in thermodynamically downhill geo-inspired pathways. Currently, more than 80% of hydrogen is produced via steam methane reforming (SMR) followed by water gas shift reaction (WGSR) pathway with the co-production of CO 2 . As an alternative to introducing CO 2 separation strategies downstream such as the use of membranes, solvents, or sorbents, geo-inspired carbon mineralization is harnessed as an alternative crystallization pathway. The thermodynamically downhill carbon mineralization pathways are hypothesized to accelerate H2 conversion while separating CO 2 . The work conducted through this project discusses the mechanisms associated with coupling the water gas shift reaction (WGSR) with carbon mineralization. In addition to harnessing Ca- and Mg-bearing oxides or hydroxides that are known to be reactive for CO 2 capture, the use of earth abundant silicate minerals such as Ca- and Mg-bearing silicates, is also investigated. Key outcomes include approaches to architect Mg-silicate with well-controlled pore size distributions, probing the enhancement in H 2 yield with inherent CO 2 suppression using Ca- and Mg-bearing oxides, hydroxides, and silicates, elucidating the changes in silicate chemistry during carbon mineralization, and exploring direct integration of carbon mineralization with WGSR and the development of separate low temperature pathway for reactive CO 2 capture and mineralization are developed.

08 HYDROGEN↗

DOE OSTI2022

Highly Efficient Layer-by-Layer Processed Quaternary Organic Solar Cells with Improved Charge Transport and Reduced Energy Loss

We report how to improve charge transport properties and reduce energy losses are the two main challenges of organic solar cells (OSCs). Herein, a new device fabrication strategy that combines the layer-by-layer (LBL) method and a quaternary active layer is demonstrated to realize highly efficient photovoltaic performance of the OSCs based on PM6:PM7/Y6:O1-2F. The introduction of the second donor, PM7,forms a cascade energy-level alignment with PM6 that facilitates effective charge transfer. The second acceptor, O1-2F, which is poorly miscible with the donors, helps to reduce the miscibility between the donors and acceptors, and thus delivers a more desirable vertical phase separation of the active layer. Furthermore, the alloy acceptor of O1-2F and Y6 can optimize the horizontal and vertical morphology of the active layer, forming an effective charge separation and continuous charge transport channel. As a result, the PM6:PM7/Y6:O1-2F system shows a distinct increase in charge mobility and a reduced nonradiative lossΔVnrof 0.231 V compared to the PM6/Y6 system, achieving a high-power conversion efficiency of18.23%. The results indicate that the quaternary LBL OSCs are promising for future large-scale and industrial manufacture of the OSCs.

14 SOLAR ENERGY↗

DOE OSTI2023

Ag Alloying in Cu 2– y Ag y Ba(Ge,Sn)Se 4 Films and Photovoltaic Devices

Trigonal Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) has recently gained interest as a potential photovoltaic absorber to target mitigation of antisite defect formation in Cu 2 ZnSn(S,Se) 4 . This study examines partial substitution of Cu by Ag as a potential approach to tune the properties of Ag-incorporated CBGTSe in the following aspects: 1) phase stability and crystal structure as a function of Ag content; 2) film morphology and grain structure; 3) charge carrier properties; 4) band positions; and 5) charge carrier kinetics and recombination. Up to 20% of Cu can be substituted by Ag in CBGTSe, while above 20% a phase mixture appears. Increasing Ag content induces larger average grain size and reduced hole carrier densities. In contrast, photoelectron spectroscopy and photoluminescence measurements reveal negligible impact of Ag substitution on ionization potential (≈5.4 eV) and electron affinity (≈3.7 eV). Also, Ag content offers negligible impact on carrier lifetimes (few ns). Consistent with these fundamental properties, solar cells based on two different Ag/(Ag + Cu) ratios (≈0% and ≈20%) show comparable power conversion efficiencies (≈2.7–2.8%). Finally, these results indicate that CBGTSe films and solar cells may be less sensitive to Ag substitution compared to Cu 2 ZnSn(S,Se) 4 , at least at the current level of absorber and device optimization.

14 SOLAR ENERGY↗

DOE OSTI2023

High-Temperature Air Stability of Electrodeposited Copper Cobalt Oxide and Copper Manganese Oxide Absorber Coatings for Concentrating Solar Power

The solar absorptance of a thermal receiver surface significantly affects the photothermal conversion efficiency of concentrating solar power (CSP) plants. The stability of solar receivers and coatings applied to improve solar absorptance at high temperatures is critical for efficient and long-term operation. This study analyzes the high-temperature air stability of multiscale fractal textured electrodeposited copper manganese oxide and copper cobalt oxide solar receiver coatings over a range of temperatures. The study also investigates the effect of high temperature on phase stability, chemical and morphological evolution, and the optical properties of the two solar absorber materials. A computational model is developed to determine the absorptance of the textured absorbers and is shown to match the experimental measurements closely over a range of heat treatment temperatures from 450 °C to 850 °C and durations up to 100 h. Degradation curves and coating stability maps are developed from the study. Copper manganese oxide and copper cobalt oxide coatings exhibit good thermal stability up to ~815 °C and 630 °C, respectively, with minimal changes in their optical and structural properties with thermal efficiency greater than 90%. Furthermore, the study offers valuable insights into the high-temperature annealing effects on the optical and structural properties of multiscale copper alloyed coatings fabricated by electrodeposition and presents a means of designing the optimal temperature range for maximizing absorber efficiency in practical applications.

14 SOLAR ENERGY↗

DOE OSTI2020

Revealing Reaction Pathways of Collective Substituted Iron Fluoride Electrode for Lithium Ion Batteries

Metal fluorides present a high redox potential among the conversion-type compounds, which make them specially work as cathode materials of lithium ion batteries. To mitigate the notorious cycling instability of conversion-type materials, substitutions of anion and cation have been proposed but the role of foreign elements in reaction pathway is not fully evaluated. In this work, we explored the lithiation pathway of a rutile-Fe 0.9 Co 0.1 OF cathode with multimodal analysis, including ex situ and in situ transmission electron microscopy and synchrotron X-ray techniques. Our work revealed a prolonged intercalation–extrusion–cation disordering process during phase transformations from the rutile phase to rocksalt phase, which microscopically corresponds to topotactic rearrangement of Fe/Co–O/F octahedra. During this process, the diffusion channels of lithium transformed from 3D to 2D while the corner-sharing octahedron changed to edge-sharing octahedron. DFT calculations indicate that the Co and O cosubstitution of the Fe 0.9 Co 0.1 OF cathode can improve its structural stability by stabilizing the thermodynamic semistable phases and reducing the thermodynamic potentials. We anticipate that our study will inspire further explorations on untraditional intercalation systems for secondary battery applications.

25 ENERGY STORAGE↗

DOE OSTI2026

Metal oxide-promoted calcium cuprate catalysts for diol oxidative dehydrocyclization to lactones

Here, this work investigates structure-function relationships in electronically tunable, redox-active, basic Cu-Ca mixed metal oxide catalysts for oxidative dehydrocyclization of liquid diols to lactones. Compositional screening identified Ni 2+ and Zn 2+ as effective promoters that increase the surface Cu 2+ population by ∼1.7× and Cu-normalized activity for liquid 1,4-butanediol conversion to γ-butyrolactone by ∼3–4×. In situ Raman spectroscopy, in situ X-ray absorption spectroscopy (XAS), in situ diffuse-reflectance Fourier transform infrared spectroscopy (DRIFTS), ex situ X-ray diffraction (XRD), and H 2 -temperature-programmed reduction (H 2 -TPR) show that Ni 2+ or Zn 2+ incorporation promotes the formation of Ca 0.82 Cu 1.00 O 2 nanoparticles under mild calcination conditions. This cuprate phase features stronger and shorter Cu–O bonds (1.90 Å) than inactive bulk CuO (1.95 Å) and square-planar Cu 2+ O 4 sites with enhanced d z2 electrophilicity, strengthening alkoxy adsorption. Pyridine-DRIFTS confirms the purely basic nature of the catalyst surface, while methanol-DRIFTS indicates Cu 2+ surface enrichment with Ni or Zn promotion, where Cu–O(Ca)–Cu sites can exist as amorphous domains or a truncation layer on crystalline nanoparticles.

09 BIOMASS FUELS↗

DOE OSTI2022

Matlab implementation of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures

This paper presents the MatLab implementation details of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures. This includes the parameterization of the modeling equations, and the initialization of the simulation based on experimental conditions. More importantly, it provides details on how the differential equations governing mass balances in both gas and liquid phases are integrated together to simulate the system dynamics over time. The semi-structured kinetic model for methanotroph-photoautotroph coculture is validated using a wide range of experimental conditions. The model: Accurate predicts both the coculture growth in liquid phase and the gas composition changes in head space over time; Explicitly models the exchange of in situ produced O 2 and CO 2 within the coculture; Considers the self-shading effect on the growth of photoautotroph.

42 ENGINEERING↗

DOE OSTI2021

Engineering block co-polymer anion exchange membrane domains for highly efficient electrode-decoupled redox flow batteries

We report, anion exchange membranes (AEMs) with high permselectivity, chemical stability and mechanical robustness are a key enabling technology for a variety of electrochemical energy conversion and storage systems such as fuel cells, redox flow batteries and water electrolyzers. Herein we examine well understood chemically stable triblock co-polymer AEMs derived by the chloromethylation (CM-) and subsequent trimethylamine (TMA) functionalization of polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) block co-polymers. We show using small angle X-ray scattering (SAXS) that the introduction of a hydrophobic reinforcement matrix disrupts phase segregation and decreases ionic domain sizes in these AEM separators. The reinforcement matrix simultaneously causes the ultimate tensile strength (UTS) of the reinforced separator to increase by almost 600% compared to the unreinforced form, while maintaining comparable elasticity (ca. 500% elongation at break). Such reinforced r-SEBS30-TMA separators enable electrode-decoupled redox flow batteries (ED-RFBs) with significantly improved lifetimes by decreasing per cycle capacity fade from 0.5% to <0.05%. This 10× improvement in operando permselectivity opens the door to ED-RFBs employing inexpensive elemental actives achieving decades-long usable lifespans.

25 ENERGY STORAGE↗

DOE OSTI2020

Ultrafast dynamics of 2-thiouracil investigated by time-resolved Auger spectroscopy

In this paper, we present time-resolved ultraviolet-pump x-ray probe Auger spectra of 2-thiouracil. An ultraviolet induced shift towards higher kinetic energies is observed in the sulfur 2p Auger decay. The difference Auger spectra of pumped and unpumped molecules exhibit ultrafast dynamics in the shift amplitude, in which three phases can be recognized. In the first 100 fs, a shift towards higher kinetic energies is observed, followed by a 400 fs shift back to lower kinetic energies and a 1 ps shift again to higher kinetic energies. We use a simple Coulomb-model, aided by quantum chemical calculations of potential energy states, to deduce a C-S bond expansion within the first 100 fs. The bond elongation triggers internal conversion from the photoexcited S 2 to the S 1 state. Based on timescales, the subsequent dynamics can be interpreted in terms of S 1 nuclear relaxation and S 1 -triplet internal conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Quantum Langevin theory for two coupled phase-conjugated electromagnetic waves

We provide a general macroscopic phenomenological formula of quantum Langevin equations for two coupled phase-conjugated electromagnetic fields with linear loss (gain) and complex nonlinear coupling coefficient. The macroscopic phenomenological formula is obtained from the coupling matrix to preserve the field commutation relations and correlations, which does not require knowing the microscopic details of light-matter interaction and internal atomic structures. To validate this phenomenological formula, we take spontaneous four-wave mixing in a double-Λ four-level atomic system as an example to numerically confirm that our macroscopic phenomenological result is consistent with that obtained from the microscopic Heisenberg-Langevin theory. We find that a complex-valued nonlinear coupling coefficient can lead to noises even without linear gain or loss. Lastly, we apply the quantum Langevin equations to study the effects of linear gain and loss, complex phase mismatching, as well as complex nonlinear coupling coefficient in entangled photon pair (biphoton) generation, particularly to their temporal quantum correlations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Lightweight Materials - Carbon Fiber and Polymer Composites, Integrated Computational Materials Engineering (ICME) Predictive Tools Development for Low-Cost Carbon Fiber for Lightweight Vehicles (University of Virginia) (Final Report)

This project aimed to develop low-cost alternative precursors and processing techniques through the implementation of an integrated computational materials engineering (ICME) framework to evaluate precursor conversion kinetics. Once established, this framework was then used to down-select precursors for laboratory- and pilot-scale production to validate resulting carbon fiber (CF) material properties and process cost-savings. The two most promising approaches to reduce the cost of CFs were to (1) use new low-cost precursors and (2) reduce the energy requirements of CF processing. These approaches were investigated over the course of three phases of work, spanning 3.5 years. This report describes the overall project objectives, approach, and the key accomplishments in each phase.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Molecular Functionalization of Semiconductor Surfaces

The presence of molecules on semiconductor surfaces can have a profound impact on their properties and applications in solar energy conversion. In this chapter we discuss the methods used to effect functionalization of semiconductor surfaces with molecular dipoles and catalysts. A major focus is the energetic impacts such molecules have to the fields at the semiconductor|contact interface. These field modulations are strongly dependent on the nature of the surface-bound molecule including its dipole moment and orientation as well as the distance of the dipole from the semiconductor surface. The contacting phase also has a strong impact on the energetics, since ions in the liquid electrolytes relevant to inorganic photochemistry partially screen dipolar effects at the surface. In addition to detailed description of these fundamentals, we present the history of this field as well as state-of-the-art chemistries that leverage the preceding decades of knowledge to impart the molecular interfacial layer with dynamic properties such as light absorption and catalysis. The challenges of establishing stable molecular attachment schemes at semiconductor|electrolyte interfaces are interwoven throughout the chapter. We conclude with a prognosis and future outlook that we hope will be a useful guide to those interested in developing the next generation of molecular chemistries at photoelectrode interfaces.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,I↗

DOE OSTI2020

Reactions during conversion of simplified low-activity waste glass feeds

The mechanisms that affect the incorporation of 99Tc, a volatile radioactive component of concern, into glass melt during vitrification of low-activity waste (LAW) are being investigated to develop the method to increase the retention of 99Tc in glass waste form. Previous studies with simulated LAW glass feeds (slurry mixture of liquid waste and chemical/mineral additives) demonstrated that the early stage feed-to-glass conversion reactions below 800°C are critical for the Re (used as a nonradioactive surrogate of 99Tc) retention in glass. To examine the effect of feed composition on the feed-to-glass conversion reactions, simplified systems containing major LAW components (NaNO3 and NaOH) and representative additive components (SiO2 and H3BO3) were designed and tested. The ratio of H3BO3 to NaNO3 was varied in three-component system without NaOH and that of NaOH to NaNO3 was varied in the four-component system at a fixed H3BO3 to NaNO3 ratio. As a first step of testing with simplified feeds, this study applied thermal analyses and phase characterization of the reacting feeds, which were performed without the addition of Re, to investigate the evolution of salt phases during slurry drying process and upon heating of dried feeds.

Jin, Tongan↗

DOE OSTI2021

Free Energies of Proton-Coupled Electron Transfer Reagents and Their Applications

Here, we present an update and revision to our 2010 review on the topic of proton- coupled electron transfer (PCET) reagent thermochemistry. Over the past decade, the data and thermochemical formalisms presented in that review have been of value to multiple fields. Concurrently, there have been advances in the thermochemical cycles and experimental methods used to measure these values. This Review (i) summarizes those advancements, (ii) corrects systematic errors in our prior review that shifted many of the absolute values in the tabulated data, (iii) provides updated tables of thermochemical values, and (iv) discusses new conclusions and opportunities from the assembled data and associated techniques. We advocate for updated thermochemical cycles that provide greater clarity and reduce experimental barriers to the calculation and measurement of Gibbs free energies for the conversion of X to XHn in PCET reactions. In particular, we demonstrate the utility and generality of reporting potentials of hydrogenation, E°(V vs H 2 ), in almost any solvent and how these values are connected to more widely reported bond dissociation free energies (BDFEs). The tabulated data demonstrate that E°(V vs H 2 ) and BDFEs are generally insensitive to the nature of the solvent and, in some cases, even to the phase (gas versus solution). This Review also presents introductions to several emerging fields in PCET thermochemistry to give readers windows into the diversity of research being performed. Some of the next frontiers in this rapidly growing field are coordination-induced bond weakening, PCET in novel solvent environments, and reactions at material interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Electro-chemo-mechanically Driven Ni Exsolution from (Pr,Ce,Ni)O 2−δ : Controlled Nucleation Density and Enhanced Electrode Kinetics

In situ exsolution of metal nanoparticles is a promising strategy to prepare electrocatalysts with enhanced activity and resistance to agglomeration for efficient chemical transformations and energy conversion. Achieving a high nucleation density of nanoparticles under mild conditions and understanding how to tailor the process is important for performance of these electrodes in electrochemical cells. In this work, we demonstrate facile exsolution of Ni nanoparticles using fluorite-structured (Pr,Ce)O 2−δ as the support oxide, driven by electrochemical potential and aided by the metastability of Ni in the solid solution (elastic driving force). We prepare single-phase oriented thin films of (Pr,Ce,Ni)O 2−δ (NPCO) on (Zr,Y)O 2−δ (YSZ) substrates by pulsed laser deposition. With the aid of a high-throughput electrochemical cell that provides a lateral gradient in Nernst voltage, we apply in situ near-ambient pressure synchrotron X-ray photoelectron spectroscopy and ex situ atomic force microscopy to investigate the impact of electrochemical potential on Ni nucleation density. We find that metallic Ni can be successfully exsolved at 550 °C upon cathodic biasing in 20 mTorr O 2 , and its nucleation density increases with increasing electrochemical driving force/decreasing oxygen chemical potential. We further evaluate the electrochemical performance under highly reducing (fuel electrode) conditions by electrochemical impedance spectroscopy. With the exsolved Ni nanoparticles, the surface exchange coefficient of the NPCO is found to be ∼4× higher than for PCO without exsolution. This work confirms mixed conducting fluorites as beneficial host lattices for facile transition-metal exsolution and suggests the possibility for constructing an all ceria-based electrochemical cell with PCO serving as both the cathode and the anode.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Coaxial Nanowire Electrodes Enable Exceptional Fuel Cell Durability

Polymer-electrolyte-membrane fuel cells (PEMFCs) hold great promise for applications in clean energy conversion, but cost and durability continue to limit commercialization. This work presents a new class of catalyst/electrode architecture that does not rely on Pt particles or carbon supports, eliminating the primary degradation mechanisms in conventional electrodes, and thereby enabling transformative durability improvements. The coaxial nanowire electrode (CANE) architecture consists of an array of vertically aligned nanowires, each comprising an ionomer core encapsulated by a nanoscale Pt film. This unique design eliminates the triple-phase boundary and replaces it with two double-phase boundaries, increasing Pt utilization. It also eliminates the need for carbon support and ionomer binder, enabling improved durability and faster mass transport. Fuel cell membrane electrode assemblies based on CANEs demonstrate extraordinary durability in accelerated stress tests (ASTs), with only 2% and 5% loss in performance after 5000 support AST cycles and 30000 catalysts AST cycles, respectively. The high-power density and extremely high durability provided by CANEs can enable a paradigm shift from random electrodes based on unstable platinum nanoparticles dispersed on carbon to ordered electrodes based on durable Pt nanofilms, facilitating rapid deployment of fuel cells in transportation and other clean energy applications.

25 ENERGY STORAGE↗

DOE OSTI2023

Two-colour dissipative solitons and breathers in microresonator second-harmonic generation

Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissipative two-colour bright-bright and dark-dark solitons in a quasi-phase-matched microresonator pumped for the second-harmonic generation in the near-infrared spectral range. We also found the breather states associated with the pulse front motion and collisions. The soliton regime is found to be typical in slightly phase-mismatched resonators, while the phase-matched ones reveal broader but incoherent spectra and higher-order harmonic generation. Soliton and breather effects reported here exist for the negative tilt of the resonance line, which is possible only via the dominant contribution of second-order nonlinearity.

42 ENGINEERING↗