Search NASA⌕ Search

SEARCH · Search NASA

Results for “physical samples”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Geomechanical properties of the Meletta sandstone - the high-temperature heat storage reservoir rock of DeepStor

The DeepStor project aims at storing excess heat at temperatures up to 140 °C in the depleted Leopoldshafen oil field at a depth of about 1300 m. In order to gain knowledge on the target horizons, the different layers of the Meletta sandstone, samples cored in a block retrieved in a quarry near Nussloch where the Meletta sandstone outcrops were studied. Several petrophysical properties were investigated including mineralogy, porosity, permeability, thermal conductivity, P- and S-wave velocities and quality factor. A mechanical study focused on compressive strength under uniaxial and triaxial stress conditions, tensile strength, critical pressure and stress-dependence of physical properties. Our results show that the Meletta sandstone is heterogeneous, anisotropic, mechanically weak, stress-sensitive and prone to water weakening. Petrophysical measurements on few Meletta sandstone cores retrieved in boreholes at about 1250 m depth showed that the outcrop samples are significantly less cohesive and weaker. Therefore, one should consider the Nussloch outcrop as a good reservoir analog only with great caution. Several models were applied to account for our experimental results on anisotropy, mechanical behavior and stress-dependence of the outcrop samples. Our study provides a valuable data set which can feed numerical models to simulate the behavior of the host formation during heat exchange operations in the DeepStor project.

Geomechanics↗
DOE OSTI2021

Orbital Hall effect as an alternative to valley Hall effect in gapped graphene

Gapped graphene has been proposed to be a good platform to observe the valley Hall effect, a transport phenomenon involving the flow of electrons that are characterized by different valley indices. In the present work, we show that this phenomenon is better described as an instance of the orbital Hall effect (OHE), where the ambiguous “valley” indices are replaced by a physical quantity, the orbital magnetic moment, which can be defined uniformly over the entire Brillouin zone. This description removes the arbitrariness in the choice of arbitrary cutoff for the valley-restricted integrals in the valley Hall conductivity, as the conductivity in the OHE is now defined as the Brillouin zone integral of a new quantity, called the orbital Berry curvature. Finally, this reformulation in terms of OHE provides a direct explanation to the accumulated opposite orbital moments at the edges of the sample, observed in previous Kerr rotation measurements.

2-dimensional systems↗
DOE OSTI2024

Rapid dissolution without elemental fractionation by laser driven hydrothermal processing

Traditional dissolution of geologic samples often requires a significant time investment. Here, we present an alternative method for the dissolution of geologic materials using laser-driven hydrothermal processing (LDHP). LDHP uses laser energy directed onto a submerged sample, which increases the temperature and pressure at the liquid–sample interface and drives the hydrothermal dissolution coupled with photomechanical spallation, an ablative process. This uses focused 527 nm laser energy at 40 W average power, 1 kHz pulse repetition rate, and 115 ns pulse duration. Importantly, when LDHP is performed on basalt geostandards (BCR-2 and BHVO-2) using the conditions outlined, we show that LDHP does not produce significant elemental fractionation and, thus, can be considered an alternative processing method to traditional mechanical crushing and acid digestion. Additionally, it is possible using LDHP to utilize the spatially confined beam to target and selectively isolate individual phases in a rock, potentially alleviating the need for mechanical separation of inclusions that are difficult to physically isolate. Furthermore, using this outlined method of LDHP, we demonstrate full dissolution of 120 mg of obsidian in 85 minu, meaning that LDHP is a potentially very useful method when sample processing is time sensitive.

58 GEOSCIENCES↗
DOE OSTI2024

Transformational faulting in Mn 2 GeO 4 from olivine to wadsleyite structure: Implications for physical mechanism of deep-focus earthquakes

High-pressure and temperature deformation experiments interfaced with acoustic emission (AE) monitoring have been conducted to study transformational faulting in Mn 2 GeO 4 olivine, which transforms to the β phase, isostructural to wadsleyite. Metastable Mn 2 GeO 4 olivine exhibits a marked embrittlement behavior at temperatures between 800 and 1100 K, emitting numerous AEs. At each temperature, brittle deformation is characterized by a two-stage process: (1) a “preparation” stage with numerous diffusedly located low-magnitude AEs and large b values (>2), and (2) a failure stage where larger-magnitude AEs form a planar distribution with b values about 1. Microstructure analysis reveals extensive kink band development in olivine grains in the recovered samples. Kink band boundaries (KBBs), with a typical thickness of ∼100 nm, are filled with a nanometric β-Mn 2 GeO 4 “gouge”. A dense array of secondary shear localizations is often present within the kink bands, suggesting significant shear deformation therein. The combined observations suggest that faulting in metastable Mn 2 GeO 4 olivine is a self-similar process, from grain-scale to the sample-scale. Both observed embrittlement behavior and the microstructure of metastable Mn 2 GeO 4 olivine are essentially identical to those in Mg 2 GeO 4 olivine we have reported previously, indicating that the physical mechanism of faulting in metastable olivine is insensitive to the specific crystallographic structure of the high-pressure phase. The low b values (about 1) observed in the faulting process in our experiments are similar to those of deep focus earthquakes in cold subduction zones. Our observed mechanism explains deep focus seismicity in cold metastable mantle wedges, provided that the self-similarity assumption holds to geological scales.

58 GEOSCIENCES↗
DOE OSTI2024

Magnetometry in a diamond anvil cell using nitrogen vacancy centers in a nanodiamond ensemble

The emerging field of optical magnetometry utilizing negative-charged nitrogen vacancy (NV – ) centers provides a highly sensitive lab bench technique for spatially resolved physical property measurements. Their implementation in high pressure diamond anvil cell (DAC) environments will become common as other techniques are often limited due to the spatial constraints of the sample chamber. Apparatus and techniques are described here permitting for more general use of magnetic field measurements inside a DAC using continuous wave optical detected magnetic resonance in NV – centers in a layer of nanodiamonds. A microstrip antenna delivers a uniform microwave field to the DAC and is compatible with simple metal gaskets, and the sensor layer of deposited nanodiamonds allows for simple determination of the magnetic field magnitude for B in the 1–100 G range. The ferromagnetic transition in iron at 18 GPa is measured with the apparatus, along with its hysteretic response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Unified bulk semiclassical theory for intrinsic thermal transport and magnetization currents

In this work, we reveal the unexpected role of the material inhomogeneity in unifying the formulation of intrinsic thermal and thermoelectric transport as well as magnetization currents. The smooth inhomogeneity leads to the position dependent local band dispersion and phase-space Berry curvature, enabling a general and rapid access to transport and magnetization currents displaying the momentum-space Berry curvature physics. Our theory does not invoke the boundary current, the thermodynamic approach to magnetization or any mechanical counterpart of statistical forces. By introducing a fictitious inhomogeneity, it applies to homogeneous samples as well, promoting the inhomogeneity to be a basic trick in semiclassical transport theories. Such a trick works regardless of the driving force of transport, e.g., temperature gradient, in contrast to the trick of fictitious gravitational field in quantum transport theories. We thus include more general mechanical driving forces and establish the Mott relation between the resulting transport thermal and electric currents, whereas this relation for these two currents was previously only known when an electric field is the driving force.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Improving the Accuracy of Atomistic Simulations of the Electrochemical Interface

Atomistic simulation of the electrochemical double layer is an ambitious undertaking, requiring quantum mechanical description of electrons, phase space sampling of liquid electrolytes, and equilibration of electrolytes over nanosecond time scales. All models of electrochemistry make different trade-offs in the approximation of electrons and atomic configurations, from the extremes of classical molecular dynamics of a complete interface with point-charge atoms to correlated electronic structure methods of a single electrode configuration with no dynamics or electrolyte. Here, we review the spectrum of simulation techniques suitable for electrochemistry, focusing on the key approximations and accuracy considerations for each technique. Additionally, we discuss promising approaches, such as enhanced sampling techniques for atomic configurations and computationally efficient beyond density functional theory (DFT) electronic methods, that will push electrochemical simulations beyond the present frontier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic Signatures of MQ-Resins in Silicone Elastomers

Polysiloxane elastomers have a large application space due to their versatile cross-linking chemistry and highly tunable physical and mechanical properties. One approach for improving the mechanical integrity of commercial polysiloxane “silicone” elastomers while maintaining their optical transparency is the addition of small, silicone-resin molecules to the network. However, both the poly(dimethylsiloxane) (PDMS) network and the silicone-resin particles have an amorphous structure and complex chemistry, which makes the characterization of their structural properties and segmental network dynamics difficult. Here, we report the synthesis and characterization of a series of model silicone networks modified with a specific class of silicone-resin known as MQ-resin using Raman and advanced nuclear magnetic resonance (NMR) spectroscopy methods. Raman spectroscopy was successfully used to quantify the contribution of the MQ-resin to the network, to determine the type of MQ-resin present in the network, and to investigate the completeness of the network cross-linking reaction. Furthermore, solid-state and 1H double-quantum (DQ) NMR spectroscopies were used not only as a detection method for the MQ-resins but also to quantify changes in the segmental dynamics of the network as a function of MQ-resin concentration. The combination of Raman and NMR spectroscopies describes a series of samples where the MQ-resin particles and PDMS chains maintain their independent segmental dynamics up to high concentrations of MQ-resins (40–50% MQ), where the physical properties of the resin dominate the physical properties of the overall network. The results from our spectroscopic analyses are consistent with the results from macroscopic characterization techniques such as solvent uptake and mechanical testing. The spectroscopic insights into the structure–property relationships of PDMS-MQ composites presented in this study are a valuable tool not only for the synthesis and reverse engineering of future generations of commercial silicone elastomers but also for understanding the mechanisms of aging and degradation over the material lifetime.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The very forward CASTOR calorimeter of the CMS experiment

The physics motivation, detector design, triggers, calibration, alignment, simulation, and overall performance of the very forward CASTOR calorimeter of the CMS experiment are reviewed. The CASTOR Cherenkov sampling calorimeter is located very close to the LHC beam line, at a radial distance of about 1 cm from the beam pipe, and at 14.4 m from the CMS interaction point, covering the pseudorapidity range of $-$6.6 $\lt\eta\lt$ $-$5.2. It was designed to withstand high ambient radiation and strong magnetic fields. The performance of the detector in measurements of forward energy density, jets, and processes characterized by rapidity gaps, is reviewed using data collected in proton and nuclear collisions at the LHC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Strong interlayer coupling and long-lived interlayer excitons in two-dimensional perovskite derivatives and transition metal dichalcogenides van der Waals heterostructures

Two-dimensional (2D) van der Waals (vdW) heterostructures offer new platforms for exploring novel physics and diverse applications ranging from electronics and photonics to optoelectronics at the nanoscale. The studies to date have largely focused on transition-metal dichalcogenides (TMDCs) based samples prepared by mechanical exfoliation method, therefore it is of signi ficant interests to study high-quality vdW heterostructures using novel materials prepared by a versatile method. Here, we report a two-step vapor phase growth process for the creation of high-quality vdW heterostructures based on perovskites and TMDCs, such as 2D Cs 3 Bi 2 I 9 /MoSe 2 , with a large lattice mismatch. Supported by experimental and theoretical investigations, we discover that the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure possesses hybrid band alignments consisting of type -I and type-II heterojunctions because of the existence of defect energy levels in Cs 3 Bi 2 I 9 . More importantly, we demonstrate that the type-II heterojunction in the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure not only shows a higher interlayer exciton density, but also exhibits a longer interlayer exciton lifetime than traditional 2D TMDCs based type-II heterostructures. We attribute this phenomenon to the reduced overlap of electron and hole wavefunctions caused by the large lattice mismatch. Finally, our work demonstrates that it is possible to directly grow high-quality vdW heterostructures based on entirely different materials which provide promising platforms for exploring novel physics and cutting-edge applications, such as optoelectronics, valleytronics, and high-temperature super fluidity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Aerosol Particle Mixing State and Composition at AMF3 (Interim Field Campaign Report)

The campaign is designed to support deployment of aerosol sampling equipment at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s third ARM Mobile Facility (AMF3) to enable both singe-particle and bulk characterization of the aerosol particles at the field site in Bankhead National Forest, northern Alabama. We are proposing to do this work as part of our proposal “Generalizing aerosol mixing state: synthesis from observations and connection to models,” which has the pre-proposal tracking number PRE-0000035878. The full proposal has Dr. Rachel O’Brien as the Principal Investigator (PI) and Dr. Andy Ault and Dr. Nicole Riemer as Co-PIs. We sought to deploy instruments in winter 2025 and summer 2025 to obtain samples in different seasons, but were delayed by AMF3 set-up and availability of students and PIs. We just completed our first deployment this summer (2025) and we are interested in obtaining samples during this upcoming fall and winter to see the seasonal trends in aerosol mixing state at the site. This will provide a comparison of the impact of biogenic emissions on the mixing state and the chemical composition of the aerosol particles. Overall, the proposed study will provide key information regarding the mixing state of aerosol particles at AMF3 with direct ties to impacts of the particles on cloud formation and light scattering/absorption. From our deployment that ended las week we have some visible observations from our samples. We are observing a regular amount of black carbon on stage 6 of our Micro-Orifice Uniform Deposit Impactor (MOUDI) and we have also observed some short, large increases in aerosol loading. We hope to continue observations of these two features to determine the sources/aging for the black carbon and the physical mixing state as well as the sources for the short (a few minutes) increases in the aerosol loading and determine if the source for these is dust or sea salt or another source. We are also interested in comparing the black carbon we see here to samples collected during the agriculture burns in January/February and in comparing the larger particles to bioaerosols in the spring. To obtain these comparisons, we will need to collect more samples in the other seasons. Finally, we have some size-resolved particle collectors that can be deployed at the same time as the tethered balloon launches. We have discussed with Swarup China about trying to get the timing to work in August and we are interested in coordinating again later, if possible. This will give us ground-level and vertical aerosol mixing state sample sets that will be very exciting to analyze.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

GW-PINN: A deep learning algorithm for solving groundwater flow equations

Machine learning methods provide new perspective for more convenient and efficient prediction of groundwater flow. In this study, a deep learning method “GW-PINN” without labeled data for solving groundwater flow equations with wells was proposed. GW-PINN takes the physics inform neural network (PINN) as the backbone and uses either the hard or soft constraint in the loss function for training. A locally refined sampling strategy (LRS) is adopted to generate the consistent spatial sampling points for problems with strong hydraulic head change, and then combined with an appropriate temporal sampling scheme to obtain the final spatial-temporal sampling points. A snowball-style two-stage training strategy by dividing the temporal domain into two subdomains is designed to decrease the sampling points. Five cases were designed to test the training performance of GW-PINN under different sampling strategies and two constraints. The predicted results of GW-PINN were compared with MODFLOW and the analytical solution. The results demonstrate that GW-PINN possesses strong ability in capturing the hydraulic head change for both confined and un-confined aquifers. The hard constraint owns more robust learning ability than the soft constraint. The LRS strategy can generate more accurate results with much fewer sampling points than traditional sampling strategies, and the snowball-style two-stage training strategy is significantly efficient for problems with the drastic change of hydraulic head. Additionally, the application of GW-PINN as a surrogate model for parameterized groundwater flow equations is illustrated. This study provides an option tool for efficient groundwater flow simulation, especially for those with local refinements are needed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An investigation of the long-range and local structure of sub-stoichiometric zirconium carbide sintered at different temperatures

ZrC 1-x (sub-stoichiometric zirconium carbide), a group IV transition metal carbide, is being considered for various high temperature applications. Departure from stoichiometry changes the thermo-physical response of the material. Reported thermo-physical properties exhibit, in some cases, a degree of scatter with one likely contributor to this being the uncertainty in the C/Zr ratio of the samples produced. Conventional, methods for assigning C/Zr to samples are determined either by nominal stochiometric ratios or combustion carbon analysis. In this study, a range of stoichiometries of hot-pressed ZrC 1-x were examined by SEM, XRD, Raman spectroscopy and static 13 C NMR spectroscopy and used as a basis to correct the C/Zr. Graphite, amorphous, and ZrC 1-x carbon signatures are observed in the 13 C NMR spectra of samples and are determined to vary in intensity with sintering temperature and stoichiometry. In this study a method is outlined to quantify the stoichiometry of ZrC 1-x and free carbon phases, providing an improvement over the sole use and reliance of widely adopted bulk carbon combustion analysis. We report significantly lower C/Zr values determined by 13 C NMR analysis compared with carbon analyser and nominal methods. Furthermore, the location of carbon disassociated from the ZrC 1-x structure is analysed using SEM and Raman spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pore-scale observations of natural hydrate-bearing sediments via pressure core sub-coring and micro-CT scanning

Abstract Both intra-pore hydrate morphology and inter-pore hydrate distribution influence the physical properties of hydrate-bearing sediments, yet there has been no pore-scale observations of hydrate habit under pressure in preserved pressure core samples so far. We present for the first time a pore-scale micro-CT study of natural hydrate-bearing cores that were acquired from Green Canyon Block 955 in UT-GOM2-1 Expedition and preserved within hydrate pressure–temperature stability conditions throughout sub-sampling and imaging processes. Measured hydrate saturation in the sub-samples, taken from units expected to have in-situ saturation of 80% or more, ranges from 3 ± 1% to 56 ± 11% as interpreted from micro-CT images. Pore-scale observations of gas hydrate in the sub-samples suggest that hydrate in silty sediments at the Gulf of Mexico is pore-invasive rather than particle displacive, and hydrate particles in these natural water-saturated samples are pore-filling with no evidence of grain-coating. Hydrate can form a connected 3D network and provide mechanical support for the sediments even without cementation. The technical breakthrough to directly visualize particle-level hydrate pore habits in natural sediments reported here sheds light on future investigations of pressure- and temperature-sensitive processes including hydrate-bearing sediments, dissolved gases, and other biochemical processes in the deep-sea environment.

58 GEOSCIENCES↗
DOE OSTI2024

Promise of Future Searches for Cosmic Topology

The shortest distance around the Universe through us is unlikely to be much larger than the horizon diameter if microwave background anomalies are due to cosmic topology. We show that observational constraints from the lack of matched temperature circles in the microwave background leave many possibilities for such topologies. We evaluate the detectability of microwave background multipole correlations for sample cases. Searches for topology signatures in observational data over the large space of possible topologies pose a formidable computational challenge. Published by the American Physical Society 2024

Physics↗
DOE OSTI2024

Evidence of h b ( 2 P ) → ϒ ( 1 S ) η Decay and Search for h b ( 1 P , 2 P ) → ϒ ( 1 S ) π 0 with the Belle Detector

We report the first evidence for the h b ( 2 P ) → ϒ ( 1 S ) η transition with a significance of 3.5 standard deviations. The decay branching fraction is measured to be B [ h b ( 2 P ) → ϒ ( 1 S ) η ] = ( 7.1 − 3.2 + 3.7 ± 0.8 ) × 10 − 3 , which is noticeably smaller than expected. We also set upper limits on π 0 transitions of B [ h b ( 2 P ) → ϒ ( 1 S ) π 0 ] < 1.8 × 10 − 3 , and B [ h b ( 1 P ) → ϒ ( 1 S ) π 0 ] < 1.8 × 10 − 3 , at the 90% confidence level. These results are obtained with a 131.4 fb − 1 data sample collected near the ϒ ( 5 S ) resonance with the Belle detector at the KEKB asymmetric-energy e + e − collider. Published by the American Physical Society 2024

Kovalenko, E. (ORCID:0000000180841931)↗
DOE OSTI2020

Joint Estimation of Topology and Injection Statistics in Distribution Grids with Missing Nodes

Optimal operation of distribution grid resources relies on accurate estimation of its state and topology. Practical estimation of such quantities is complicated by the limited presence of real-time meters. This article discusses a theoretical framework to jointly estimate the operational topology and statistics of injections in radial distribution grids under limited availability of nodal voltage measurements. In particular, we show that our proposed algorithms are able to provably learn the exact grid topology and injection statistics at all unobserved nodes as long as they are not adjacent. The algorithm design is based on novel ordered trends in voltage magnitude fluctuations at node groups, that are independently of interest for radial physical flow networks. The complexity of the designed algorithms is theoretically analyzed and their performance is validated using both linearized and nonlinear ac power flow samples in test distribution grids.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Single‐parent expression drives dynamic gene expression complementation in maize hybrids

SUMMARY Single‐parent expression (SPE) is defined as gene expression in only one of the two parents. SPE can arise from differential expression between parental alleles, termed non‐presence/absence (non‐PAV) SPE, or from the physical absence of a gene in one parent, termed PAV SPE. We used transcriptome data of diverse Zea mays (maize) inbreds and hybrids, including 401 samples from five different tissues, to test for differences between these types of SPE genes. Although commonly observed, SPE is highly genotype and tissue specific. A positive correlation was observed between the genetic distance of the two inbred parents and the number of SPE genes identified. Regulatory analysis showed that PAV SPE and non‐PAV SPE genes are mainly regulated by cis effects, with a small fraction under trans regulation. Polymorphic transposable element insertions in promoter sequences contributed to the high level of cis regulation for PAV SPE and non‐PAV SPE genes. PAV SPE genes were more frequently expressed in hybrids than non‐PAV SPE genes. The expression of parentally silent alleles in hybrids of non‐PAV SPE genes was relatively rare but occurred in most hybrids. Non‐PAV SPE genes with expression of the silent allele in hybrids are more likely to exhibit above high parent expression level than hybrids that do not express the silent allele, leading to non‐additive expression. This study provides a comprehensive understanding of the nature of non‐PAV SPE and PAV SPE genes and their roles in gene expression complementation in maize hybrids.

Li, Zhi↗