Search NASA⌕ Search

SEARCH · Search NASA

Results for “point defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Refractive index change dependence on Ge(1) defects in {gamma}-irradiated Ge-doped silica

We present an experimental study regarding the effects of the {gamma} radiation on silica glass doped with Ge up to 10 000 ppm molar produced by the sol-gel technique. We have determined the irradiation-induced changes in the refractive index ({delta}n) as a function of the oxygen deficiency of the samples, evaluated from the ratio between the germanium lone pair centers (GLPC) and the Ge content. {delta}n at 1500 nm have been estimated using optical-absorption spectra in the range 1.5-6 eV. We have found that {delta}n is independent of Ge differences for GLPC/Ge values <10{sup -4}, while it depends on Ge for larger oxygen deficiencies. In details, the oxygen deficiency can reduce the induced {delta}n of the investigated materials and our studies evidence that the photosensitivity of the GeO{sub 2}-SiO{sub 2} glass is reduced until the GLPC concentration reaches values of 2x10{sup 17}-5x10{sup 17} defects/cm{sup 3}. We have also investigated the induced concentration of paramagnetic point defects [Ge(1), Ge(2), and E'Ge] using the electron-paramagnetic-resonance (EPR) technique. From the comparison of the optical and EPR data we have further found a relation between the induced optical-absorption coefficient at 5.8 eV and Ge(1) defects, a linear correlation between Ge(1) and {delta}n and the absence of a correlation between the other paramagnetic defects and {delta}n. These findings suggest that the {delta}n phenomenology is closely related to the Ge(1) generation mechanisms and this latter is affected by the oxygen defic0011ien.

36 MATERIALS SCIENCE↗

Application of Nomarski DIC and cathodoluminescence (CL) microscopy to building materials

The present study discusses the potential of an integrated application of Nomarski differential interference contrast and cathodoluminescence microscopy for the investigation of building materials such as natural stone, cement, mortar and concrete. Nomarski differential interference contrast microscopy is a modern technique applied in materials sciences to visualize different phases and/or to image the surface relief on the scale of 50 nm. It is based on the principle of beam splitting by a double-crystal prism split, resulting in the superposition of laterally shifted wave fronts. In cathodoluminescence microscopy, the luminescence signal is excited by an electron beam and is generated by different point defects within the material. Therefore, cathodoluminescence is a powerful method to characterize the defect structure of solid materials, to distinguish different phases and to reveal detailed information about their chemical composition. By combining Nomarski differential interference contrast and cathodoluminescence microscopy, textural, crystallographic and chemical information can be obtained from the same sample area in a polished thin section.

36 MATERIALS SCIENCE↗

Carbon related donor bound exciton transitions in ZnO nanowires

Several shallow donor bound exciton photoluminescence (PL) transitions are reported in ZnO nanowires doped with carbon. The emission energies are in the range of 3360.8–3361.9 meV, close to previously reported emission lines due to excitons bound to donor point defects, such as Ga, Al, In, and H. The addition of small amounts of hydrogen during growth results in a strong enhancement of the PL of these carbon related emission lines, yet PL and annealing measurements indicate no appreciable bulk hydrogen. The observation of two electron satellites for these emission lines enables the determination of the donor binding energies. The dependence of exciton localization energy on donor binding energy departs somewhat from the usual linear relationship observed for group III donors, indicating a qualitatively different central cell potential, as one would expect for a complex. Emission lines due to excitons bound to ionized donors associated with these defects are also observed. The dependence of the PL emission intensities on temperature and growth conditions demonstrates that the lines are due to distinct complexes and not merely excited states of each other.

36 MATERIALS SCIENCE↗

Effects of carbon on phosphorus diffusion in SiGe:C and the implications on phosphorus diffusion mechanisms

The use of carbon (C) in SiGe base layers is an important approach to control the base layer dopant phosphorus (P) diffusion and thus enhance PNP heterojunction bipolar transistor (HBT) performance. This work quantitatively investigated the carbon impacts on P diffusion in Si₀.₈₂Ge₀.₁₈:C and Si:C under rapid thermal anneal conditions. The carbon molar fraction is up to 0.32%. The results showed that the carbon retardation effect on P diffusion is less effective for Si₀.₈₂Ge₀.₁₈:C than for Si:C. In Si₀.₈₂Ge₀.₁₈:C, there is an optimum carbon content at around 0.05% to 0.1%, beyond which more carbon incorporation does not retard P diffusion any more. This behavior is different from the P diffusion behavior in Si:C and the B in Si:C and low Ge SiGe:C, which can be explained by the decreased interstitial-mediated diffusion fraction f{sub I}{sup P,SiGe} to 95% as Ge content increases to 18%. Empirical models were established to calculate the time-averaged point defect concentrations and effective diffusivities as a function of carbon and was shown to agree with previous studies on boron, phosphorus, arsenic and antimony diffusion with carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology, electrical, and optical properties of heavily doped ZnTe:Cu thin films

We report on a study of the physical properties of ZnTe:Cu films with Cu content up to ∼12 at. % prepared using rf magnetron sputtering. The composition and lateral homogeneities are studied using X-ray photoelectron spectroscopy (XPS). Atomic force microscopy measurements on films deposited at different substrate temperatures (up to 325 °C) yielded activation energy of 12 kJ/mole for the grains growth. The results of XPS and electrical and optical measurements provide evidence for the formation of the ternary zinc copper telluride alloy in films containing Cu concentration above ∼4 at. %. The XPS results suggest that copper is incorporated in the alloy with oxidation state Cu{sup 1+} so that the alloy formula can be written Zn{sub 1−y}Cu{sub y} Te with y = 2−x, where x is a parameter measuring the stoichiometry in the Cu site. The formation of this alloy causes appreciable shift in the binding energies of the XPS peaks besides an IR shift in the energy band gap. Detailed analysis of the optical absorption data revealed the presence of two additional transitions, besides the band gap one, originating from the Γ{sub 8} and Γ{sub 7} (spin-orbit) valence bands to a donor level at ∼0.34 eV below the Γ{sub 6} conduction band. This interpretation yields a value for the valence band splitting energy Δ≅ 0.87 eV independent of copper concentration. On the other hand, the mechanism of formation of the alloy is tentatively explained in terms of a point defect reaction in which substitutional Cu defect Cu{sub Zn} is also created. Assuming that substitutional Cu is the dominant acceptor in the Zn rich alloy as in ZnTe, its formation energy was determined to be 1.7 eV close to the theoretical value (1.41 eV) in ZnTe.

36 MATERIALS SCIENCE↗

Origin of the visible emission of black silicon microstructures

Silicon, the mainstay semiconductor in microelectronics, is considered unsuitable for optoelectronic applications due to its indirect electronic band gap that limits its efficiency as light emitter. Here, we univocally determine at the nanoscale the origin of visible emission in microstructured black silicon by cathodoluminescence spectroscopy and imaging. We demonstrate the formation of amorphous silicon oxide microstructures with a white emission. The white emission is composed by four features peaking at 1.98 eV, 2.24 eV, 2.77 eV, and 3.05 eV. The origin of such emissions is related to SiO{sub x} intrinsic point defects and to the sulfur doping due to the laser processing. Similar results go in the direction of developing optoelectronic devices suitable for silicon-based circuitry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contactless electroreflectance of InGaN layers with indium content <=36%: The surface band bending, band gap bowing, and Stokes shift issues

Contactless electroreflectance (CER) supported by photoluminescence (PL) has been applied to study (i) the surface band bending, (ii) the band gap bowing, and (iii) the Stokes shift for InGaN layers grown by molecular beam epitaxy with 0.14<=In<=0.36. The type of surface band bending has been investigated on the basis of the shape of CER resonance. It has been found that the surface band bending changes from n-type for layers with low indium content (In<27%) to flatband (or weak p-type band) for layers with Inapprox35%. The band gap bowing has been determined to be 1.4+-0.2 and 2.1+-0.3 eV for CER data with and without strain corrections, respectively. From this analysis it has been concluded that the reliable value of the bowing parameter for unstrained InGaN should be between 1.4 and 2.1 eV. Comparing CER with PL data it has been found that the Stokes shift rises from 20 to 120 meV when the indium concentration increased from 14% to 36%. In addition, it has been observed that the intensity of PL from InGaN layers decreased exponentially with the increase in the indium content. The last two findings are attributed to an easier formation of native point defects and stronger indium segregation in InGaN alloys with higher indium concentrations.

36 MATERIALS SCIENCE↗

Electrical and photoelectric characteristics of structures based on InSe and GaSe layered semiconductors irradiated with 12.5-MeV electrons

The effect of irradiation with 12.5-MeV electrons on the electrical and photoelectric parameters of layered photoconverters based on p-InSe-n-InSe and p-GaSe-n-InSe structures is studied. The observed variations in the current-voltage characteristics, photoresponse spectra, open-circuit voltage, and short-circuit current are caused by the formation of point defects. The absence of pronounced changes in the characteristics of the homojunctions and heterojunctions even after irradiation at the highest dose makes it possible to recommend these junctions for use in the fabrication of radiation-resistant photodetectors.

36 MATERIALS SCIENCE↗

Undoped High-Resistance GaN Buffer Layer for AlGaN/GaN High-Electron-Mobility Transistors

It is shown that intentionally undoped high-resistance GaN buffer layers in AlGaN/GaN heterostructures with high electron mobility for transistors can be formed by ammonia molecular beam epitaxy. The GaN growth conditions have been optimized using calculations of the background impurity and point defect concentrations at different ratios of the gallium and ammonia fluxes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new set-up for in-situ probing of radiation effects in materials and electronic devices

The micro-probe facility installed at the Van de Graff accelerator at CTN/IST permits simultaneous measurements of Rutherford Backscattering Spectrometry (RBS), Particle Induced X-ray Emission (PIXE) and Iono-Luminescence (IL). Here we present a recent up-grade of the measurement chamber allowing improved optical sensitivity in IL measurements and opening the possibility to perform simultaneously electrical measurements. Combinations of all these characterization techniques make this setup a powerful tool to characterize and modify different materials with spatial resolution. In particular, it can be used to study radiation effects in different materials and electronic devices in-situ. IL is a luminescence technique that uses the ion beam as the excitation source. Compared with other luminescence techniques with spatial resolution like Cathodoluminescence, this technique has the advantage to probe deeper regions of the sample, several microns below the surface. The same ion beam used to produce luminescence, can create a high density of defects, in a controllable way and the new set-up allows monitoring optical and electrical properties in realtime. In this work we combine IL with I-V curve measurements to assess the response of Ga{sub 2}O{sub 3} and GaN to proton irradiation. Ga{sub 2}O{sub 3} and GaN are emerging materials for applications in high power electronics and are considered for radiation resistant electronics. We will present a systematic study of the changes in IL and conductivity in Ga{sub 2}O{sub 3} and GaN samples with the energy of the ion beam and with the time of exposure. In particular, it was observed that during the irradiation some luminescence bands related with intrinsic point defects decrease while other new bands appear. Simulations using the SRIM code were used to determine the depth profiles of ionization and displacement events, helping to correlate the optical and electrical response of the materials with certain radiation effects. These studies show the potentialities of measuring simultaneously IL and electrical conductivity and how these two characterization techniques can work as a sensitive tool to detect and quantify radiation effects. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Effect of Irradiation with Si{sup +} Ions on Resistive Switching in Memristive Structures Based on Yttria-Stabilized Zirconia

We have studied the resistive switching in memristive structures based on 40-nm-thick yttria-stabilized zirconia (YSZ) films exposed to 6-keV Si{sup +} ion irradiation to a total dose of 5.4 × 10{sup 15} cm{sup –2}. It is established that the ion irradiation leads to increased stability of the parameters of resistive switching in YSZ based memristive structures. This effect is related to the fact that the diameter of conducting filaments in irradiated structures is limited by lateral dimensions of the region of atomic displacement cascades (i.e., the region occupied by point defects produced by bombarding ions). The oxidation of ion-modified filaments during resistive switching proceeds more effectively and leads to increasing resistance in the high-resistance state of memristive structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the optical properties of GaAs with δ-Si doping grown by molecular-beam epitaxy at low temperatures

Molecular-beam epitaxy is used for the preparation of structures based on “low-temperature” grown GaAs with introduced d-Si doping. Specific features in the photon-energy range of 1.28–1.48 eV are observed in the photoluminescence spectrum after structures annealing at temperatures of 520 and 580°C; these features are related to the formation of point defects and their complexes. The “pump–probe” light transmission measurements reveal that the characteristic lifetimes of nonequilibrium carriers in the fabricated structures amount to T{sup c} ≈ 1.2–1.5 ps.

36 MATERIALS SCIENCE↗

Effect of implanted species on thermal evolution of ion-induced defects in ZnO

Implanted atoms can affect the evolution of ion-induced defects in radiation hard materials exhibiting a high dynamic annealing and these processes are poorly understood. Here, we study the thermal evolution of structural defects in wurtzite ZnO samples implanted at room temperature with a wide range of ion species (from {sup 11}B to {sup 209}Bi) to ion doses up to 2 × 10{sup 16} cm{sup −2}. The structural disorder was characterized by a combination of Rutherford backscattering spectrometry, nuclear reaction analysis, and transmission electron microscopy, while secondary ion mass spectrometry was used to monitor the behavior of both the implanted elements and residual impurities, such as Li. The results show that the damage formation and its thermal evolution strongly depend on the ion species. In particular, for F implanted samples, a strong out-diffusion of the implanted ions results in an efficient crystal recovery already at 600 °C, while co-implantation with B (via BF{sub 2}) ions suppresses both the F out-diffusion and the lattice recovery at such low temperatures. The damage produced by heavy ions (such as Cd, Au, and Bi) exhibits a two-stage annealing behavior where efficient removal of point defects and small defect clusters occurs at temperatures ∼500 °C, while the second stage is characterized by a gradual and partial annealing of extended defects. These defects can persist even after treatment at 900 °C. In contrast, the defects produced by light and medium mass ions (O, B, and Zn) exhibit a more gradual annealing with increasing temperature without distinct stages. In addition, effects of the implanted species may lead to a nontrivial defect evolution during the annealing, with N, Ag, and Er as prime examples. In general, the obtained results are interpreted in terms of formation of different dopant-defect complexes and their thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable photoluminescence of self-assembled GeSi quantum dots by B{sup +} implantation and rapid thermal annealing

The layered GeSi quantum dots (QDs) are grown on (001) Si substrate by molecular beam epitaxy. The photoluminescence (PL) peak of the as-grown GeSi quantum dots has obvious blue shift and enhancement after processed by ion implantation and rapid thermal annealing. It is indicated that the blue shift is originated from the interdiffusion of Ge and Si at the interface between QDs and the surrounding matrix. The dependence of PL intensity on the excitation power shows that there are the nonradiative centers of shallow local energy levels from the point defects caused by the ion implantation, but not removed by the rapid thermal annealing. The tunable blue shift of the PL position from the 1300 nm to 1500 nm region may have significant application value in the optical communication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural creep, fatigue and creep-fatigue modeling of Nickel-based superalloy Inconel 617 at high temperature - 18506

Inconel 617 is a solution strengthened nickel-based alloy which has been considered as one of the leading structural material for the intermediate heat exchangers (IHX) in very high temperature reactor (VHTR). In order to gain understanding of the creep and fatigue deformation mechanisms and their interactions in alloy 617 operating in the VHTR environment, a computational model that operates at the microstructural scale has been developed for creep, fatigue and creep-fatigue modeling of alloy 617. This model is based on an isothermal, large deformation crystal plasticity finite element (CPFE) formulation and idealizes the deformation in the crystal lattice as collective glide and climb of dislocations. A recently developed glide resistance evolution equation by the authors that can capture the intermediate softening observed in both fatigue and creep-fatigue cycles of Inconel 617 at high temperature is adopted for the dislocation glide formulation. Dislocation climb is incorporated to account for the interactions between dislocations and local point defects at high temperature. The CP equations are solved incrementally as the constitutive relationship in the context of FE analysis on fully resolved microstructure reconstructed from experiment data. Model parameters are calibrated and verified using experimental tests. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Atomistic Simulations of Displacement Cascades in Fused Silica: It is Compared with Different Concentration of H in the Bulk

Amorphous Silica is one of candidate materials for both final focusing optics of lasers for NIF and future inertial fusion reactors and diagnostics of the Safety and Control Systems of the ITER machine as well as DEMO magnetic fusion reactors. In operation, these materials will be exposed to high neutron irradiation fluxes and it can result in point defect and vary the optical absorption, that is, degradation of the optical properties. In this paper we present molecular dynamic simulation of displacement cascade due to energetic recoils in amorphous silica without hydrogen atoms and with 1% of hydrogen atoms trying to identify defects formation. We have made a statistics of the different kind of defects at different energy of primary knock-on atoms (PKA). The range of studied PKA energies are from 400 eV to 3.5 keV and it is made to both component of this material Silicon and Oxygen. (authors)

36 MATERIALS SCIENCE↗

A Rate Theory Model of Radiation-Induced Swelling in an Austenitic Stainless Steel

Many rate theory models of cavity (void) swelling have been published over the past 50 years, all having the same, or similar, structures. A rigorous validation of the models has not been possible because of the dearth of information concerning the microstructures that correspond with the swelling data. Whereas the lack of microstructure information is still an issue for historical swelling data, in the past 10–20 years data have been published on the evolution of the microstructure (point defect yields from collision cascades, cavity number densities, and dislocation densities/yield strengths) allowing certain gaps in information to be filled when considering historic swelling data. With reasonable estimates of key microstructure parameters, a standard rate theory model can be applied, and the model parameter space explored, in connection with historical swelling data. By using published data on: (i) yield strength as a function of dose and temperature (to establish an empirical expression for dislocation density evolution); (ii) cavity number densities as a function of temperature; and (iii) freely migrating defect (FMD) production as a function of primary knock-on atom (PKA) spectrum, the necessary parameter and microstructure inputs that were previously unknown can be used in model development. This paper describes a rate-theory model for void swelling of 316 stainless steel irradiated in the EBR-2 reactor as a function of irradiation temperature and neutron dose.

36 MATERIALS SCIENCE↗

Effect of annealing on the nonequilibrium carrier lifetime in GaAs grown at low temperatures

GaAs samples grown by molecular-beam epitaxy at low (230 Degree-Sign C) temperatures are investigated. One of the samples is subjected to aftergrowth annealing at 600 Degree-Sign C. Using an unconventional pump-probe scheme for measuring the dynamic variation in the light refractive index, the nonequilibrium charge-carrier lifetime (275 {+-} 30 fs before annealing) is determined. Such a short carrier lifetime in the unannealed material is due to the high concentration of point defects, mainly As{sub Ga} antisite defects. According to X-ray diffraction and steady-state optical absorption data, the As{sub Ga} concentration in the samples is 3 Multiplication-Sign 10{sup 19} cm{sup -3}, which corresponds to an arsenic excess of 0.26 at %. Upon annealing at 600 Degree-Sign C, the superstoichiometric As defects self-organize and form As nanoinclusions in the GaAs crystal matrix. It is shown that in this case the nonequilibrium charge-carrier lifetime increases to 452 {+-} 5 fs. This lifetime is apparently ensured by the capture of non-equilibrium charge carriers at metal As nanoinclusions.

36 MATERIALS SCIENCE↗