Search NASA⌕ Search

SEARCH · Search NASA

Results for “rocket”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Coordinated rocket and satellite measurements of an auroral event. I - Satellite observations and analysis

Results of a coordinated auroral experiment involving the Atmosphere Explorer C satellite and a sounding rocket are reported. Auroral primary electron fluxes and neutral gas densities measured by instruments on the satellite are used in a model calculation of the thermospheric manifestation of the aurora. There is encouraging agreement between the calculated and measured electron density, electron temperature, secondary electron flux, and O I emissions at 5577 and 6300 A. A discrepancy between the calculated and the rocket-measured 3914-A emission profile is discussed in terms of experiment geometry and auroral physics. The coordinated measurements are used to infer vertical fluxes of ionization and of electron thermal energy at high altitudes

Rees, M. H.↗

Effects of entrained water and strong turbulence on afterburning within solid rocket motor plumes

During the first few seconds of the space shuttle trajectory, the solid rocket boosters will be in the proximity of the launch pad. Because of the launch pad structures and the surface of the earth, the turbulent mixing experienced by the exhaust gases will be greatly increased over that for the free flight situation. In addition, a system will be present, designed to protect the lifting vehicle from launch structure vibrations, which will inject quantities of liquid water into the hot plume. The effects of these two phenomena on the temperatures, chemical composition, and flow field present in the afterburning solid rocket motor exhaust plumes of the space shuttle were studied. Results are included from both a computational model of the afterburning and supporting measurements from Titan 3 exhaust plumes taken at Kennedy Space Center with infrared scanned radiometers.

Gomberg, R. I.↗

Liquid Rocket Lines, Bellows, Flexible Hoses, and Filters

Fluid-flow components in a liquid propellant rocket engine and the rocket vehicle which it propels are interconnected by lines, bellows, and flexible hoses. Elements involved in the successful design of these components are identified and current technologies pertaining to these elements are reviewed, assessed, and summarized to provide a technology base for a checklist of rules to be followed by project managers in guiding a design or assessing its adequacy. Recommended procedures for satisfying each of the design criteria are included.

Source record↗

Proposal to National Aeronautics and Space Administration for continuation of a grazing incidence imaging telescope for X-ray astronomy using sounding rockets

The construction of a high resolution imaging telescope experiment payload suitable for launch on an Astrobee F sounding rocket was proposed. Also integration, launch, and subsequent data analysis effort were included. The payload utilizes major component subassemblies from the HEAO-B satellite program which were nonflight development units for that program. These were the X ray mirror and high resolution imager brassboard detector. The properties of the mirror and detector were discussed. The availability of these items for a sounding rocket experiment were explored with the HEAO-B project office.

Murray, B.↗

Molded composite pyrogen igniter for rocket motors

A lightweight pyrogen igniter assembly including an elongated molded plastic tube adapted to contain a pyrogen charge was designed for insertion into a rocket motor casing for ignition of the rocket motor charge. A molded plastic closure cap provided for the elongated tube includes an ignition charge for igniting the pyrogen charge and an electrically actuated ignition squib for igniting the ignition charge. The ignition charge is contained within a portion of the closure cap, and it is retained therein by a noncorrosive ignition pellet retainer or screen which is adapted to rest on a shoulder of the elongated tube when the closure cap and tube are assembled together. A circumferentially disposed metal ring is provided along the external circumference of the closure cap and is molded or captured within the plastic cap in the molding process to provide, along with O-ring seals, a leakproof rotary joint.

Heier, W. C.↗

Joint observations of 4U1223-62 by the SAS-3 satellite and Columbia University proportional counter experiment on NASA rocket 26.054 UH

The pulsating X-ray binary 4U1223-62 and Vela X-1 were observed by Aerobee rocket-borne proportional counters. Valid X-ray events were telemetered and analyzed for possible flaring, quasiperiodic, and periodic pulsations, and for other nonstatistical behavior in the source. Both fast Fourier transform and autocorrelation programs were used. For several hours four days before and after the rocket flight, the SAS-3 satellite scanned the galactic plane in order to identify X-ray sources in the vicinity of 4U1223-62 and their intensities, and to provide positional accuracy of 0.25 for sources with intensity greater than 10% of the target. Observations of the source near the main peak of its pulsating period as defined by SAS-3 are discussed. There is no evidence of a spectral feature although twice as many photons were received as than from Vela X-1.

Novick, R.↗

Aerodynamic roll characteristics of a 0.00548 scale 146-inch solid rocket booster reentry configuration (MSFC Model Number 486) over a portion of the reentry flight regime in the NASA MSF 14-inch trisonic wind tunnel

An experimental investigation was conducted in the MSFC 14 inch TWT to study the roll characteristics of a 0.00548 scale model of the 146 inch shuttle solid rocket booster to obtain more accurate rolling moment data on the solid rocket booster. A sensitive single component roll balance was utilized. Data were obtained for a single nose mounted sting. The angle of attack range consisted of angles from 150 deg to 190 deg; roll angles consisted of angles from 0 deg to 337 1/2 deg in increments of 22 1/2 deg; and Mach numbers were 1.46, 1.96, 2.74 and 2.48.

Ramsey, P. E.↗

Demand-type gas supply system for rocket borne thin-window proportional counters

A simple closed loop control system has been developed to maintain the gas pressure in thin-window proportional counters during rocket flights. This system permits convenient external control of detector pressure and system flushing rate. The control system is activated at launch with the sealing of a reference volume at the existing system pressure. Inflight control to plus or minus 2 torr at a working pressure of 760 torr has been achieved on six rocket flights.

Acton, L. W.↗

Correlation of ground-based and topside photometric observations with auroral electron spectra measurements at rocket altitudes

Data are collected by electron detectors aboard a sounding rocket measuring the primary electron spectrum and the energy flux on the field lines containing auroral light in the E region. These data are compared to calculations based on spectroscopic measurements of the auroral lines 4278, 5577, and 6300 A used in predicting the energy influx and the characteristic energy of an assumed Maxwellian primary electron spectrum for two auroral displays. Data were also collected by photometers sampling the auroral light from the E region magnetically conjugate to the rocket. These data are compared to those of current ionospheric models.

Arnoldy, R. L.↗

Rocket observation of high frequency waves over a strong aurora

High frequency waves in two frequency bands above the electron gyro frequency (1.6 MHz and 2.3 MHz) were observed by radio receivers carried on a sounding rocket as it passed over a strong aurora. Only the line at 2.3 MHz has a large magnetic component. Both 0.4s and 4s periods are present in much of the emissions. Good correlation is seen for a short time between the 2.3 MHz waves and 1.9 keV electrons detected on board the rocket.

Kellogg, P. J.↗

A high-altitude rocket measurement of nitric oxide

The nitric oxide density was measured from 110 to 300 km by a rocket photometer during the day. The small measured peak density, about 6.2 x 10 to the 6th/cu cm at 111 km, can probably be attributed to the period of very low solar magnetic activity preceding the rocket flight. This experiment was coordinated with a similar measurement made by the Ultraviolet Nitric Oxide Experiment aboard the Atmosphere Explorer C satellite; the measurements are in good agreement. The altitude resolution (less than 1 km) and sensitivity (1600 counts/R/s) greatly exceed those of previous measurements. Comparison to a model shows agreement above 200 km but less nitric oxide and more structure below that.

Thomas, R. J.↗

Standard Molded Composite Rocket Pyrogen Igniter - A progress report

The pyrogen igniter has the function to furnish a controlled, high temperature, high pressure gas to ignite solid propellant surfaces in a rocket motor. Present pyrogens consist of numerous inert components. The Standard Molded Pyrogen Igniter (SMPI) consists of three basic parts, a cap with several integrally molded features, an ignition pellet retainer plate, and a tube with additional integrally molded features. A description is presented of an investigation which indicates that the SMPI concept is a viable approach to the design and manufacture of pyrogen igniters for solid propellant rocket motors. For some applications, combining the structural and thermal properties of molded composites can result in the manufacture of lighter assemblies at considerable cost reduction. It is demonstrated that high strength, thin walled tubes with high length to diameter ratios can be fabricated from reinforced plastic molding compound using the displacement compression process.

Lucy, M. H.↗

An investigation of the side force that is sometimes observed in rocket start-up

The occurrence of a large but momentary side force during the start-up of rocket motors employing convergent-divergent nozzles has been noted occasionally. Asymmetric flow separation within the divergent section of the nozzle is proposed as the principal source of this lateral force. A method for estimating this force and its concomitant lateral impulse is outlined, and results obtained by applying the method to Scout vehicle first-, second-, and third-stage rocket motor start-ups are presented and compared with similar estimates that other researchers obtained by a different method.

Bowyer, J. M., Jr.↗

Auroral radar and rocket double-probe observations of the electric field across the Harang discontinuity

The region of plasma flow and electric field reversal in the late evening auroral oval was observed simultaneously by auroral radar and by rocket. A strong, 30-50 mV/m, northward electric field was measured in the southern part of the observing region and a strong southward field in the northern part. In the middle, rocket measurements showed a weak field that rotated from north, through east, to south. In this region, no radar auroral irregularities were observed when the electric field was less than approximately 20 mV/m.

Cahill, L. J., Jr.↗

Otrag rocket experiments in Africa

West German rocket manufacturers are testing their products in Zaire. Hundreds of pipes (12 m x 80 cm) are bundled together inside the test missiles, which are fired into Zaire's prairie. The reactions of neighboring nations, as well as leading countries of the world, are presented concerning the rocket tests.

Source record↗

Rocket observations of electron-density irregularities in the equatorial ionosphere below 200 km

Nike Apache rockets carring instrumentation to measure electron density and its fine structure in the equatorial ionosphere were launched from Chilca, Peru in May and June 1975. The fine structure experiment and the data reduction system are described. Results obtained from this system are presented and compared with those obtained by VHF radar and from other rocket studies. A description of the equatorial ionosphere and its features is also presented.

Klaus, D. E.↗

Laser rocket system analysis

The laser rocket systems investigated in this study were for orbital transportation using space-based, ground-based and airborne laser transmitters. The propulsion unit of these systems utilizes a continuous wave (CW) laser beam focused into a thrust chamber which initiates a plasma in the hydrogen propellant, thus heating the propellant and providing thrust through a suitably designed nozzle and expansion skirt. The specific impulse is limited only by the ability to adequately cool the thruster and the amount of laser energy entering the engine. The results of the study showed that, with advanced technology, laser rocket systems with either a space- or ground-based laser transmitter could reduce the national budget allocated to space transportation by 10 to 345 billion dollars over a 10-year life cycle when compared to advanced chemical propulsion systems (LO2-LH2) of equal capability. The variation in savings depends upon the projected mission model.

Jones, W. S.↗

A rocket-borne pulse-height analyzer for energetic particle measurements

The pulse-height analyzer basically resembles a time-sharing multiplexing data-acquisition system which acquires analog data (from energetic particle spectrometers) and converts them into digital code. The PHA simultaneously acquires pulse-height information from the analog signals of the four input channels and sequentially multiplexes the digitized data to a microprocessor. The PHA together with the microprocessor form an on-board real-time data-manipulation system. The system processes data obtained during the rocket flight and reduces the amount of data to be sent back to the ground station. Consequently the data-reduction process for the rocket experiments is speeded up. By using a time-sharing technique, the throughput rate of the microprocessor is increased. Moreover, data from several particle spectrometers are manipulated to share one information channel; consequently, the TM capacity is increased.

Leung, W.↗