Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock wave experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Generation of high-intensity ultrasound through shock propagation in liquid jets

We investigated the generation and propagation of ultrasonic pressure waves produced by focused x-ray free-electron laser pulses in 14 to 30 μm diameter liquid water microjets. The pressure waves formed through reflections, at the surface of the microjets, of the initial shock launched in the liquid by the x-ray pulse. These waves developed a characteristic geometric pattern which is related to, but different from, the shock structures of supersonic gas jets. Fully developed waves had initial peak pressures ranging from less than –24 MPa to approximately 100 MPa, which exceed the compressive and tensile strengths of many materials, and correspond to extreme sound intensities on the order of 1 GW/m 2 and sound pressure levels above 270 dB (re: 1 μ Pa). The amplitudes and intensities were limited by the wave destroying its own propagation medium though cavitation, and therefore these ultrasonic waves in jets are one of the most intense propagating sounds that can be generated in liquid water. The pressure of the initial shock decayed exponentially, more rapidly in thinner jets, and the decay length was proportional to the jet diameter within the accuracy of measurements. Extrapolating our results to thinner jets, we find that the pressure waves may damage protein crystals carried by liquid jets in x-ray laser crystallography experiments conducted at megahertz repetition rates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock-tube study of carbon monoxide dissociation kinetics

Carbon monoxide dissociation-rate data were obtained over the temperature range 5600-12,000 K. The experiments were conducted with undiluted CO to emphasize rate constants applicable to molecular gas systems. Data were obtained as time-resolved pressure measurements on the end wall of a shock tube and, in some cases, as emission histories of the C2 Swan system (0-0 band) behind incident shock waves. Results confirm the presence of C2 as an intermediate species in CO decomposition.

Hanson, R. K.↗

N2O and CO production by electric discharge - Atmospheric implications

Enhanced levels of N2O and CO were measured in tropospheric air samples exposed to a 17,500-J laboratory discharge. These enhanced levels correspond to an N2O production rate of about 4 trillion molecules/J and a CO production rate of about 10 to the 14th molecules/J. The CO measurements suggest that the primary region of chemical production in the discharge is the shocked air surrounding the lightning channel, as opposed to the slower-cooling inner core. Additional experiments in a simulated Venus atmosphere (CO2 - 95%, N2 - 5%, at one atmosphere) indicate an enhancement of CO from less than 0.1 ppm prior to the laboratory discharge to more than 2000 ppm after the discharge. Comparison with theoretical calculations appears to confirm the ability of a shock-wave/thermochemical model to predict the rate of production of trace species by an electrical discharge.

Levine, J. S.↗

Gyrophase-bunched Electrons: Cluster Observations and Simulations

The interaction of the solar wind with the Earth's bow shock is responsible for a number of phenomena both upstream and downstream. One of the least understood and studied of these is the generation of gyrophase-bunched electrons. We will describe initial work searching for and analyzing such events in (Plasma Electron And Current Experiment (PEACE) data from CLUSTER. Plasma simulations will complement the data analysis. Recent analyses suggest that gyrophase-bunched electrons are present rather frequently in the upstream region, due either to energization in the reflection off the shock front or, more likely, to phase trapping in locally produced whistler wave fields.

Gurgiolo, C.↗

The Effects of Material-Filled Voids on Detonation Wave Shape in Rubberized RDX Explosives

The sensitivity of explosives is affected by inhomogeneities within the material. This is evident in the increased shock sensitivity of explosives with slightly lower densities resulting from an increased number of hotspots. The influence of hotspots on explosive initiation has been well studied; however, few studies have been conducted on the effect of intermediate-sized voids (0.1–10 mm) on a propagating detonation wave. Cylindrical voids filled with air have been studied for diameters ranging from 0.3 mm to 0.8 mm for both 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) and 1,3,5-trinitro-1,3,5-triazinane (RDX)-based rubberized explosives. Continuing the investigation into single cylindrical voids, this study examined the effects of 0.5 mm diameter voids filled with different inert cylindrical metals on the detonation wave shape for an RDX-based rubberized explosive. The metals selected for experiments were 1066 aluminum, brass, copper, and tungsten. The propagation of the detonation wave was captured using a digital streak camera. Experimental results showed that the extent of detonation wave shaping was closely tied to the density differential between the bulk explosive and metal insert. Forty-four different filler materials, including non-metals, were simulated using a hydrodynamic code to further analyze material inclusion effects. The main factors hypothesized to be of interest were bulk sound speed, shock impedance, and filler material density. We found that the local detonation delay could be correlated fairly well to a ratio of bulk sound speed and density. Understanding the influence of material inclusions on detonation performance and wave shape allows for tailoring of detonations.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

SYSTEMATIC AND STOCHASTIC VARIATIONS IN PULSAR DISPERSION MEASURES

We analyze deterministic and random temporal variations in the dispersion measure (DM) from the full three-dimensional velocities of pulsars with respect to the solar system, combined with electron-density variations over a wide range of length scales. Previous treatments have largely ignored pulsars’ changing distances while favoring interpretations involving changes in sky position from transverse motion. Linear trends in pulsar DMs observed over 5–10 year timescales may signify sizable DM gradients in the interstellar medium (ISM) sampled by the changing direction of the line of sight to the pulsar. We show that motions parallel to the line of sight can also account for linear trends, for the apparent excess of DM variance over that extrapolated from scintillation measurements, and for the apparent non-Kolmogorov scalings of DM structure functions inferred in some cases. Pulsar motions through atomic gas may produce bow-shock ionized gas that also contributes to DM variations. We discuss the possible causes of periodic or quasi-periodic changes in DM, including seasonal changes in the ionosphere, annual variations of the solar elongation angle, structure in the heliosphere and ISM boundary, and substructure in the ISM. We assess the solar cycle’s role on the amplitude of ionospheric and solar wind variations. Interstellar refraction can produce cyclic timing variations from the error in transforming arrival times to the solar system barycenter. We apply our methods to DM time series and DM gradient measurements in the literature and assess their consistency with a Kolmogorov medium. Finally, we discuss the implications of DM modeling in precision pulsar timing experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

FORMATION OF BLACK HOLE AND ACCRETION DISK IN A MASSIVE HIGH-ENTROPY STELLAR CORE COLLAPSE

We present the first numerical result of fully general relativistic axisymmetric simulations for the collapse of a rotating high-entropy stellar core to a black hole and an accretion disk. The simulations are performed taking into account the relevant microphysics. We adopt as initial conditions a spherical core with constant electron fraction (Y{sub e} = 0.5) and entropy per baryon s = 8 k{sub B} , and angular velocity is superimposed. In the early phase, the core collapses in a homologous manner. Then it experiences a weak bounce due to the gas pressure of free nucleons. Because the bounce is weak, the core eventually collapses to a black hole. Subsequent evolution depends on initial angular velocity. When the rotation is not fast, a geometrically thin (but optically thick) accretion disk is formed, and shock waves are formed in the inner part of the disk. For the moderately rotating case, the thin accretion disk eventually expands to become a geometrically thick torus after sufficient accumulation of the thermal energy is generated at the shocks. Furthermore, convection occurs inside the torus. Neutrino luminosities vary violently with time because of the convective motion. For the rapidly rotating case, by contrast, a geometrically thick torus is formed soon after the black hole formation, and the convective activity is weak due to the presence of an epicyclic mode.

79 ASTRONOMY AND ASTROPHYSICS↗

Some tunnel-wall effects on transonic flutter

Significant effects of wind-tunnel walls were observed on the transonic flutter boundaries of wall-mounted models during two flutter model research studies. In these studies, flutter experiments with cantilevered SST-type wing models were conducted in three different wind tunnels. The experimental results are compared to flutter boundaries calculated for the models in free air. The results indicate that transonic flutter boundaries can be affected by tunnel-wall interference, tunnel resonances, and shock-wave reflections, and that flutter model data accuracy is a function of model/tunnel size and tunnel wall porosity. However, models within the recommended size limits should give accurate results in transonic tunnels with normal ventilation. A flutter trend analysis for a two-dimensional wing-demonstrating tunnel wall and resonance effects on flutter are also presented.

Ruhlin, C. L.↗

First results from the Giotto magnetometer experiment during the P/Grigg-Skjellerup encounter

The Giotto magnetic field experiment has provided the first magnetic field data on the interaction between the solar wind and a low gas production comet, P/Grigg-Skjellerup. Waves produced by ion pick-up instabilities have been observed throughout the interaction region with particularly simple waveforms at large distances and a rich phenomenology. A bow shock has been observed outbound only, whereas inbound a change in the character of the wave fields occurred without a jump in the magnetic field vector. The inbound and outbound crossings of the bow wave and shock at 19,900 km and 25,400 km from the nucleus, respectively, imply a neutral gas production rate of (6.7 +/- 1.6) x 10 exp 27/sec. A magnetic field cavity of the comet was not crossed. The pile-up region of 2500 km width along the trajectory showed a magnetic field peak of 88.7 nT.

Neubauer, F. M.↗

Fermi, Wind, and SOHO Observations of Sustained Gamma-Ray Emission from the Sun

We report on the linear relationship between the durations of two types of electromagnetic emissions associated with shocks driven by coronal mass ejections: sustained gamma-ray emission (SGRE) and interplanetary type II radio bursts. The relationship implies that shocks accelerate approximately 10 kiloelectronvolts electrons (for type II bursts) and more than 300 megaelectronvolts protons (for SGRE) roughly over the same duration. The SGRE events are from the Large Area Telescope (LAT) on board the Fermi satellite, while the type II bursts are from the Radio and Plasma Wave Experiment (WAVES) on board the Wind spacecraft. Here we consider five SGRE events that were not included in a previous study of events with longer duration (more than 5 hours). The five events are selected by relaxing the minimum duration to 3 hours. We found that some SGRE events had a tail that seems to last until the end of the associated type II burst. We pay special attention to the 2011 June 2 SGRE event that did not have a large solar energetic particle event at Earth or at the STEREO spacecraft that was well connected to the eruption. We suggest that the preceding CME (Coronal Mass Ejection) acted as a magnetic barrier that mirrored protons back to Sun.

Gopalswamy, N.↗

Simulation and analysis of the 3D double shock-induced recompression of spall using a hybrid PAGOSA with FLIP+MPM

In this work, an innovative hybrid algorithm PAGOSA with FLIP + MPM is first presented by coupling PAGOSA with the particle FLIP + MPM, and applied to systematically exploring the 3D recompression of spall induced by double-shock waves in ductile materials as the few existing studies are currently limited to the pure longitudinal recompression of spall, and ignore the 3D effects. This algorithm solves the difficulties the grid-based methods encounter when applied to capturing the fracture in material. We first validate the capabilities of PAGOSA with FLIP + MPM to predict different fracture/fragmentation cases by solving two benchmark problems and comparing with the analytical solutions or the experiment results. The convergences and the infinity-norm errors are also investigated. Subsequently, the 3D effects are demonstrated by simulating the spallation in material using PAGOSA with FLIP + MPM and comparing with those in the longitudinal cases. Additionally, some factors that affect the spallation with 3D effects are also discussed. Finally, the recompressions of spall in material with/without 3D effects are systematically simulated and analyzed. The recompression of spall driven by a high explosive is also simulated to show the ability of PAGOSA with FLIP + MPM to handle this kind of problem. The conditions that can lead to a recompression of spall are explored. Also, numerical results show that PAGOSA with FLIP + MPM can accurately predict different fracture cases, that the 3D effects play an important role in fracture/fragmentation, and the recompression of spall is very sensitive to the occurrence conditions, shows great differences when considering 3D effects in real applications. Moreover, the present hybrid method can be easily extended to other grid-based techniques employed for fracture in materials.

3D effects↗

Shock wave perturbation decay in granular materials

A technique in which the evolution of a perturbation in a shock wave front is monitored as it travels through a sample is applied to granular materials. Although the approach was originally conceived as a way to measure the viscosity of the sample, here it is utilized as a means to probe the deviatoric strength of the material. Initial results for a tungsten carbide powder are presented that demonstrate the approach is viable. Simulations of the experiments using continuum and mesoscale modeling approaches are used to better understand the experiments. The best agreement with the limited experimental data is obtained for the mesoscale model, which has previously been shown to give good agreement with planar impact results. The continuum simulations indicate that the decay of the perturbation is controlled by material strength but is insensitive to the compaction response. Other sensitivities are assessed using the two modeling approaches. The simulations indicate that the configuration used in the preliminary experiments suffers from certain artifacts and should be modified to remove them. As a result, the limitations of the current instrumentation are discussed, and possible approaches to improve it are suggested.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A point-particle-based hydride shell-shedding model for ejecta particle transport in reactive environments

A shock wave passing over a rough or perturbed metal surface will induce a limiting case of Richtmyer–Meshkov instability and will cause small particles to eject from the surface and transport into the surrounding medium. These particles are known as ejecta and can be either solid or liquid in nature. Recent experiments have shown that liquid cerium ejecta clouds exhibit unexpected non-monotonic acceleration behaviors as well as temperature plateaus after a brief temperature rise if they are transporting in a chemically reactive, hydrogen-based medium while they act as expected in an inert medium. This work details a point-particle model developed for reactive cerium ejecta transport, which attempts to account for these new physics through the behavior of a developing solid hydride shell, which is believed to form as a product of the reaction. The overall model incorporates the effects of the reaction on the particle properties as well as the effects of potential shedding of the shell into sub-micrometer scale flakes and potential phase change of the hydride if the ejecta particles reach the melt point of the hydride layer. The model is tested by performing simulations of the original motivating experiments and comparing quantities, such as ejected mass, velocimetry, and temperature profiles, against the experimental data. While the model is able to capture many general features of the observed anomalies, some inaccuracies still exist. These point to both missing physics in the model (such as a deuterium adsorption mechanism on the hydride layer) as well as a lack of knowledge of certain material properties (such as the strength of cerium hydride to determine dynamic fracture thicknesses) needed to fully reduce the uncertainties in the model by up to an order of magnitude and perform a true attempt at model validation.

97 MATHEMATICS AND COMPUTING↗

Refractive index of lithium fluoride at high dynamic stresses

Alkali halides are prototypical ionic solids whose refractive index is a fundamental property related to their lattice structure and ionic polarizability. In particular, lithium fluoride (LiF) has the largest band gap of any known transparent material and maintains transparency at high pressures, making it well suited for use as an optical window in dynamic compression experiments. While empirical fits to the measured density dependence of the refractive index have been provided, a model that is valid over the entire pressure range of experiments and based on a polarization-based theoretical description is lacking. We present a refractive index model for dynamically compressed LiF based on the Lorentz-Lorenz equation, where the molecular polarizability is determined using a single oscillator model with a strain polarizability parameter Λ=0.73. Here, we show that our modeling approach provides an excellent match to the LiF refractive index data for both shock and ramp compression experiments to 900 GPa (density compression greater than threefold). Additionally, updated fits are provided to determine the refractive index correction for LiF windows used in dynamic compression experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser-heated thruster

The development of computer codes for the thrust chamber of a rocket of which the propellant gas is heated by a CW laser beam was investigated. The following results are presented: (1) simplified models of laser heated thrusters for approximate parametric studies and performance mapping; (3) computer programs for thrust chamber design; and (3) shock tube experiment to measure absorption coefficients. Two thrust chamber design programs are outlined: (1) for seeded hydrogen, with both low temperature and high temperature seeds, which absorbs the laser radiation continuously, starting at the inlet gas temperature; and (2) for hydrogen seeded with cesium, in which a laser supported combustion wave stands near the gas inlet, and heats the gas up to a temperature at which the gas can absorb the laser energy.

Kemp, N. H.↗

Hybrid particle-in-cell simulations of electromagnetic coupling and waves from streaming burst debris

Various systems can be modeled as a point-like explosion of ionized debris into a magnetized, collisionless background plasma-including astrophysical examples, active experiments in space, and laser-driven laboratory experiments. Debris streaming from the explosion parallel to the magnetic field may drive multiple resonant and non-resonant ion-ion beam instabilities, some of which can efficiently couple the debris energy to the background and may even support the formation of shocks. We present a large-scale hybrid (kinetic ions + fluid electrons) particle-in-cell simulation, extending hundreds of ion inertial lengths from a 3D explosion, that resolves these instabilities. We show that the character of these instabilities differs notably from the 1D equivalent by the presence of unique transverse structure. Additional 2D simulations explore how the debris beam length, width, density, and speed affect debris-background coupling, with implications for the generation of quasi-parallel shocks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The laser shock station in the dynamic compression sector. I

The Laser Shock Station in the Dynamic Compression Sector [Advanced Photon Source (APS), Argonne National Laboratory] links a laser-driven shock compression platform with high energy x-ray pulses from the APS to achieve in-situ, time-resolved x-ray measurements (diffraction and imaging) in materials subjected to well-characterized, high stress, short duration planar shock waves. Additionally, the combination of this station and the other DCS experimental stations provides a unique and versatile experimental facility to study condensed state phenomena by undertaking real-time, multi-scale measurements in materials subjected to a wide range of shock amplitudes (to above ~350 GPa) and time-durations (~10 ns to 1 μs). The Laser Shock Station uses a 100 joule, 5-17 ns, 351 nm frequency tripled Nd:glass laser with programmable pulse shaping and focal profile smoothing for maximum precision. The laser is capable of a shot every 30 minutes. The interaction chamber contains multiple ports for simultaneous diagnostics, a sample holder that allows sequential exposure for 14 samples without breaking vacuum, the capability to vary the angle between the x-ray beam and laser beam by 135°, and the ability to translate to select one of two types of x-ray beams. X-ray data can be taken with a temporal resolution of ~90 psec. Highly reproducible, planar shocks can be propagated in samples to undertake precise and well-characterized experiments. In a series of ten shots, the absolute variation in the time the shock breaks out at the back of the sample is less than 500ps and the variation in peak particle velocity at the sample/window interface is 4.3%. Lastly, this paper describes the entire DCS Laser Shock Station, including sample fabrication and diagnostics, as well as representative experimental results from shock compressed tantalum to demonstrate the excellent quality of x-ray diffraction data in solid tantalum and to establish the stress for tantalum melting.

47 OTHER INSTRUMENTATION↗