Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Hydrogen storage in LiH: A first principle study

First principles calculations have been performed on the Lithium hydride (LiH) using the full potential linearized augmented plane wave (FP-LAPW) method within the framework of density functional theory. We have extended our calculations for LiH+2H and LiH+6H in NaCl structure. The structural stability of three compounds have been studied. It is found that LiH with 6 added Hydrogen atoms is most stable. The obtained results for LiH are in good agreement with reported experimental data. Electronic structures of three compounds are also studied. Out of three the energy band gap in LiH is ∼3.0 eV and LiH+2H and LiH+6H are metallic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water as a matrix for life

"Follow the water" is the canonical strategy in searching for life in the universe. Conventionally, discussion of this topic is focused on how solvent supports organic chemistry sufficiently rich to seed life. Perhaps more importantly, solvent must promote self-organization of organic matter into functional structures capable of responding to environmental changes. This process is based on non-covalent interactions. They are constantly formed and broken in response to internal and external stimuli. This requires that their strength must be properly tuned. If they were too weak, the system would exhibit undesired, uncontrolled response to natural fluctuations of physical and chemical parameters. If they were too strong kinetics of biological processes would be slow and energetics costly. Non-covalent interactions are strongly mediated by the solvent. Specifically, high dielectric solvents for life are needed for solubility of polar species and flexibility of biological structures stabilized by electrostatic interactions. Water exhibits a remarkable trait that it promotes solvophobic interactions between non-polar species, which are responsible for self-organization phenomena such as the formation of cellular boundary structures, and protein folding and aggregation. Unusual temperature dependence of hydrophobic interactions - they often become stronger as temperature increases - is a consequence of the temperature insensitivity of properties of the liquid water. This contributes to the existence of robust life over a wide temperature range. Water is not the only liquid with favorable properties for supporting life. Other pure liquids or their mixtures that have high dielectric constants and simultaneously support some level of self-organization will be discussed.

Pohorille, Andrew↗

PROPERTIES OF DEFECTS AND IMPLANTS IN Mg+ IMPLANTED SILICON CARBIDE

As a candidate material for fusion reactor designs, silicon carbide (SiC) under high-energy neutron irradiation undergoes atomic displacement damage and transmutation reactions that create magnesium as one of the major metallic products. The presence of Mg and lattice disorder in SiC is expected to affect structural stability and degrade thermo-mechanical properties that could limit SiC lifetime for service. We have initiated a combined experimental and computational study that uses Mg+ ion implantation and multiscale modeling to investigate the structural and chemical effects in Mg implanted SiC and explore possible property degradation mechanisms.

Environmental Molecular Sciences Laboratory↗

Metal-Templated Design of Chemically Switchable Protein Assemblies with High-Affinity Coordination Sites

To mimic a hypothetical pathway for protein evolution, we previously tailored a monomeric protein (cyt cb562) for metal-mediated self-assembly, followed by re-design of the resulting oligomers for enhanced stability and metal-based functions. We show that a single hydrophobic mutation on the cyt cb562 surface drastically alters the outcome of metal-directed oligomerization to yield a new trimeric architecture, (TriCyt1)3. This nascent trimer was redesigned into second and third-generation variants (TriCyt2)3 and (TriCyt3)3 with increased structural stability and preorganization for metal coordination. The three TriCyt variants combined furnish a unique platform to 1) provide tunable coupling between protein quaternary structure and metal coordination, 2) enable the construction of metal/pH-switchable protein oligomerization motifs, and 3) generate a robust metal coordination site that can coordinate all mid-to-late first-row transition-metal ions with high affinity.

Albert Kakkis↗

Core-shell structure of porous silicon with nitrogen-doped carbon layer for lithium-ion batteries

Highlights: • The porous silicon is evenly coated with a nitrogen-doped carbon layer. • The introduction of nitrogen increases the conductivity of electrode. • The preparation process is economical and feasible to large-scale production. - Abstract: In this work, we develop a one-step carbonization method for constructing a core-shell structure of porous silicon with nitrogen-doped carbon layer for lithium-ion batteries. As a result, the porous silicon is evenly coated with a layer of nitrogen-doped carbon. Benefit from the internally stable structure of porous silicon and the support of external carbon layer, the whole electrode shows excellent structural stability. Excitingly, nitrogen-doped carbon layer is successfully obtained, and three different carbon-nitrogen species are identified, which significantly increases the electronic conductivity of composite electrode. Most importantly, the as prepared core-shell structure p-Si/NC composites deliver a stable cycling performance with 720 mA h g{sup −1} after 200 cycles at the current density of 200 mA g{sup −1} and a favorable rate capacity of 550 mA h g{sup −1} at the current density of 2 A g{sup −1}. Additionally, the preparation process in this paper is more economical and feasible to achieve large-scale production.

36 MATERIALS SCIENCE↗

Pressure-Induced Phase Transition in Hydrogen-Bonded Supramolecular Structure: Guanidinium Nitrate

In situ Raman scattering and synchrotron X-ray diffraction have been used to investigate the effects of high pressure on the structural stability of guanidinium nitrate (C(NH{sub 2}){sub 3}{sup +} {center_dot} NO{sub 3}{sup -}, GN), a representative two-dimensional supramolecular architecture of hydrogen-bonded rosette network. This study has confirmed a structural phase transition observed by Raman scattering and X-ray diffraction at {approx}1 GPa and identified it as a space group change from C2 to P2{sub 1}. The high-pressure phase remained stable up to 22 GPa. We discussed the pressure-induced changes in N-H stretching vibration in Raman spectra and proposed that this phase transition is due to the rearrangements of the hydrogen-bonding networks.

43 PARTICLE ACCELERATORS↗

Morphology- and lattice stability-dependent performance of nanostructured Li 4 Ti 5 O 12 probed by in situ high-pressure Raman spectroscopy and synchrotron X-ray diffraction

Nanostructured Li 4 Ti 5 O 12 (LTO) as a promising anode material in lithium-ion batteries (LIBs) has shown excellent yet morphology-dependent performance in LIB operations. However, the structural origin that influences the material performance at the microscopic level remains unclear. In this work, using combined in situ Raman spectroscopy and synchrotron X-ray diffraction, we comparatively investigated the structural stability of two nanostructured LTO materials with different morphologies by application of external pressure up to 27 GPa. In particular, nanoflower-like Li 4 Ti 5 O 12 spheres (LTO-1) and Li 4 Ti 5 O 12 nanoparticles (LTO-2) were subjected to high pressures using diamond anvil cells and their structural evolutions were characterized upon compression and decompression. Raman measurements show that both LTO materials undergo pressure-induced structural disorder but with different reversibilities upon decompression. X-ray results further confirmed the Raman measurements, and also allowed the quantitative analysis of pressure dependence of the crystal structures. Structural refinements of the diffraction patterns yield morphology-dependent bulk moduli of the two LTO materials, which reveal critical information about the intrinsic lattice strain and vacancies. These different structural characteristics, when compared with another spinel structure of lithiated titanium dioxide, allow the interpretation of the different performance between LTO-1 and LTO-2 for LIB operations. This study thus contributes to the understanding of the important factors that may influence the electrochemical performance and help with the design of new LTO-based anode materials for LIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing Long-Term Cycling Stability of Single-Crystal Versus Polycrystalline Nickel-Rich NCM in Pouch Cells with 6 mAh cm -2 Electrodes

Lithium-ion batteries based on single-crystal LiNi1-x-yCoxMnyO2 (NCM, 1-x-y ≥ 0.6) cathode materials are gaining increasing attention due to their improved structural stability resulting in superior cycle life compared to batteries based on polycrystalline NCM. However, an in-depth understanding of the less pronounced degradation mechanism of single-crystal NCM is still lacking. Here, a detailed postmortem study is presented, comparing pouch cells with single-crystal versus polycrystalline LiNi 0.60 Co 0.20 Mn 0.20 O 2 (NCM622) cathodes after 1375 dis-/charge cycles against graphite anodes. The thickness of the cation-disordered layer forming in the near-surface region of the cathode particles does not differ significantly between single-crystal and polycrystalline particles, while cracking is pronounced for polycrystalline particles, but practically absent for single-crystal particles. Transition metal dissolution as quantified by time-of-flight mass spectrometry on the surface of the cycled graphite anode is much reduced for single-crystal NCM622. Similarly, CO 2 gas evolution during the first two cycles as quantified by electrochemical mass spectrometry is much reduced for single-crystal NCM622. Benefitting from these advantages, graphite/single-crystal NMC622 pouch cells are demonstrated with a cathode areal capacity of 6 mAh cm -2 with an excellent capacity retention of 83% after 3000 cycles to 4.2 V, emphasizing the potential of single-crystalline NCM622 as cathode material for next-generation lithium-ion batteries.

36 MATERIALS SCIENCE↗

Electronic band structure trends of perovskite halides: Beyond Pb and Sn to Ge and Si

The trends in electronic band structure are investigated in the cubic ABX 3 halide perovskites fo rA=Cs;B=Pb,Sn, Ge, Si; andX=I, Br, Cl. The gaps are found to decrease from Pb to Sn and from Ge to Si, but increase from Sn to Ge. The trend is explained in terms of the atomic levels of the group-IV element and the atomic sizes which changes the amount of hybridization with X-p and hence the valence bandwidth. Along the same series spin-orbit coupling also decreases and this tends to increase the gap because of the smaller splitting of the conduction band minimum. Both effects compensate each other to a certain degree. The trend with halogens is to reduce the gap from Cl to I, i.e., with decreasing electronegativity. The part of the tolerance factor in avoiding octahedron rotations and octahedron edge sharing is discussed. The Ge containing compounds have tolerance factor t>1 and hence do not show the series of octahedral rotation distortions and the existence of edge-sharing octahedral phases known for Pb and Sn-based compounds, but rather a rhombohedral distortion. CsGeI 3 is found to have a suitable gap for photovoltaics both in its cubic (high-temperature) and rhombohedral (low-temperature) phases. The structural stability of the materials in the different phases is also discussed. We find the rhombohedral phase to have lower total energy and slightly larger gaps but to present a less significant distortion of the bandstructure than the edge-sharing octahedral phases, such as the yellow phase in CsSnI3. The corresponding silicon based compounds have not yet been synthesized and therefore our estimates are less certain but indicate a small gap for cubic CsSiI 3 and CsSiBr 3 of about 0.2±0.2 eV and 0.8±0.6 eV for CsSiCl 3 . The intrinsic stability of the Si compounds is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transitions in delafossite CuLaO{sub 2} at high pressures

Structural stability of a transparent conducting oxide CuLaO{sub 2} at high pressures is investigated using in-situ Raman spectroscopy, electrical resistance, and x-ray diffraction techniques. The present Raman investigations indicate a sequence of structural phase transitions at 1.8 GPa and 7 GPa. The compound remains in the first high pressure phase when pressure is released. Electrical resistance measurements carried out at high pressures confirm the second phase transition. These observations are further supported by powder x-ray diffraction at high pressures which also showed that a-axis is more compressible than c-axis in this compound. Fitting the pressure dependence of unit cell volume to 3{sup rd} order Birch-Murnaghan equation of state, zero pressure bulk modulus of CuLaO{sub 2} is determined to be 154(25) GPa. The vibrational properties in the ambient delafossite phase of CuLaO{sub 2} are investigated using ab-initio calculations of phonon frequencies to complement the Raman spectroscopic measurements. Temperature dependence of the Raman modes of CuLaO{sub 2} is investigated to estimate the anharmonicity of Raman modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

i -Wave Symmetry Altermagnetism and Anomalous Hall Conductivity in Monolayer FeCl 3

In this work, the FeCl 3 monolayer is proposed to host a rare and exotic i -wave symmetry altermagnetism. Using first-principles calculations, we performed a detailed investigation of the structural stability and electronic, magnetic, and spintronic properties of monolayer FeCl 3 . Our results suggest the system is semiconducting in nature and exhibits i-wave symmetry nonrelativistic spin splitting (NRSS), originating from its hexagonal crystal structure with roto-inversion symmetries and anisotropic crystal field. The momentum-resolved spin-splitting further supports the presence of spin-dependent topological features. Further, the monolayer exhibits sizable conventional spin-Hall and anomalous Hall conductivities, highlighting its promise as a versatile platform for next-generation flexo-spintronic applications.

altermagnetism↗

Regulating Cation Interactions for Zero–Strain and High–Voltage P2–type Na 2/3 Li 1/6 Co 1/6 Mn 2/3 O 2 Layered Oxide Cathodes of Sodium–Ion Batteries

Deep sodium extraction/insertion of sodium cathodes usually causes undesired Jahn–Teller distortion and phase transition, both of which will reduce structural stability and lead to poor long-cycle reliability. Here we report a zero-strain P2- Na 2/3 Li1/6Co 1/6 Mn 2/3 O 2 cathode, in which the lithium/cobalt substitution contributes to reinforcing the host structure by reducing the Mn 3+ /Mn 4+ redox, mitigating the Jahn–Teller distortion, and minimizing the lattice change. 94.5 % of Na + in the unit structure can be reversibly cycled with a charge cut-off voltage of 4.5 V (vs. Na + /Na). Impressively, a solid-solution reaction without phase transitions is realized upon deep sodium (de)intercalation, which poses a minimal volume deviation of 0.53 %. Finally, it attains a high discharge capacity of 178 mAh g –1 , a high energy density of 534 Wh kg –1 , and excellent capacity retention of 95.8 % at 1 C after 250 cycles.

25 ENERGY STORAGE↗

Comparative Pore Structure and Dynamics for Bacterial Microcompartment Shell Protein Assemblies in Sheets or Shells

Bacterial microcompartments (BMCs) are protein-bound organelles found in some bacteria that encapsulate enzymes for enhanced catalytic activity. These compartments spatially sequester enzymes within semipermeable shell proteins, analogous to many membrane-bound organelles. The shell proteins assemble into multimeric tiles; hexamers, trimers, and pentamers, and these tiles self-assemble into larger assemblies with icosahedral symmetry. While icosahedral shells are the predominant form in vivo , the tiles can also form nanoscale cylinders or sheets. The individual multimeric tiles feature central pores that are key to regulating transport across the protein shell. Our primary interest is to quantify pore shape changes in response to alternative component morphologies at the nanoscale. We used molecular modeling tools to develop atomically detailed models for both planar sheets of tiles and curved structures representative of the complete shells found in vivo . Subsequently, these models were animated using classical molecular dynamics simulations. From the resulting trajectories, we analyzed the overall structural stability, water accessibility to individual residues, water residence time, and pore geometry for the hexameric and trimeric protein tiles from the Haliangium ochraceu m model BMC shell. These exhaustive analyses suggest no substantial variation in pore structure or solvent accessibility between the flat and curved shell geometries. We additionally compare our analysis to hydroxyl radical footprinting data to serve as a check against our simulation results, highlighting specific residues where water molecules are bound for a long time. Although with little variation in morphology or water interaction, we propose that the planar and capsular morphology can be used interchangeably when studying permeability through BMC pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Distortion Induced by Manganese Activation in a Lithium-Rich Layered Cathode

The search for batteries with high energy density has highlighted lithium-rich manganese-based layered oxides due to their exceptionally high capacity. Although it is clear that both cationic and anionic redox are present in the charge compensation mechanism, the microstructural evolution of the Li 2 MnO 3 -like phase during anionic redox and its role in battery performance and structural stability are still not fully understood. Here, we systematically probe microstructural evolution using spatially resolved synchrotron X-ray measurements and reveal an underlying interaction between the Li 2 MnO 3 -like domains and bulk rhombohedral structure. Mn ion activation and a previously unobserved structural distortion are discovered at high voltages, and can be related to structural strain present in the Li 2 MnO 3 -like phase upon substantial lithium ion extraction. Moreover, we elucidate a correlation between this structural distortion and irreversible phase transitions by thermally perturbing delithiated samples. These insights highlight a pathway toward achieving high capacity cathode materials required for future commercial applications.

36 MATERIALS SCIENCE↗

Waste Chemistry Envelope for the Determination of Pitting Corrosion Susceptibility - 19554

Liquid radioactive wastes at the Hanford and Savannah River sites are stored in large underground carbon steel tanks. The high-level wastes are processed in several of the tanks and then transferred by piping to other site facilities for further processing before they are stabilized in a vitrified or grout waste form. Based on waste removal and processing schedules, many of the tanks, will be required to be in service for times exceeding the initial intended life (i.e., greater than 60 years). Until the waste is removed from storage, transferred, and processed, the materials and structures of the tanks must maintain a confinement function by providing a barrier to the environment and by maintaining acceptable structural stability during design basis events, which include loadings from both normal service and abnormal (e.g., earthquake) conditions. Administrative programs are in place to mitigate potential corrosion mechanisms and thereby maintain the structural and leak integrity functions of these waste tanks throughout their intended service life. Waste chemistry and temperature control are the means by which corrosion degradation of the waste tanks is minimized. Chemistry controls are based on in-situ coupon tests, waste tank experience, and laboratory testing. These requirements comprise the technical standards for corrosion control. The standards are utilized then as guidelines for operational procedures. The present waste chemistry controls for the Hanford DSTs were established in the 1980's in response to tank failures caused by stress corrosion cracking (SCC) at the DOE Savannah River Site (SRS). Portions of the SRS chemistry limits, which were developed at the Savannah River National Laboratory (SRNL) were coupled with corrosion testing results from Pacific Northwest National Laboratories (PNNL) and adopted for corrosion control of the double-shell tank (DST) waste at the Hanford Site. Since that time, the temperatures of the waste in the DSTs have decreased to less than 50 deg. C in most cases as the radioactive material has decayed. As a consequence, new chemistry controls were formulated for SCC in 2010. This testing however, did not address that potential for pitting in the supernatant and at the liquid-air interface. Indeed, initial tests indicated that the inhibitor requirements for SCC would be insufficient for the prevention of pitting. In addition to lower waste temperatures, future retrieval and process changes may impact the DST waste chemistry. Initial projections suggest that the waste chemistry of the DSTs may shift to a broader range of pH and higher aggressive anion concentrations (e.g., chloride, sulfate, etc.) than the wastes that are presently stored. Additionally, processes within the vitrification facility may result in streams that are returned to the tank farm for evaporation. These streams may also contain high concentrations of aggressive species. SRNL investigated the propensity for pitting of the carbon steel waste tanks at current and projected DST waste chemistries. A statistically designed series of tests provided a pitting factor that relates the ratio of the inhibitor species to the aggressive species and the probability of observing pitting. An acceptable pitting factor was determined and was utilized for the development of a new chemistry envelope. The new chemistry envelope was compared to the envelope that was established for SCC and was determined to be bounding. Validation of the new chemistry envelope was performed via model simulations and comparison with historical experimental results and approaches to establishing chemistry envelopes. The new chemistry envelope will eventually be part of an overall assessment of the condition of the tanks and any changes made to the overall structural integrity program for the Hanford DSTs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

On the densification of cubic ZrO{sub 2} nanocondensates by capillarity force and turbostratic C–Si–H multiple shell

A turbostratic C–Si–H lamellar phase with 0.35–0.39 nm interspacing and ZrO{sub 2} condensates having cubic (c), tetragonal and monoclinic structures stabilized by increasing particle size were synthesized by pulsed laser ablation on Zr plate in TEOS and characterized by X-ray/electron diffraction and optical spectroscopy. The c-ZrO{sub 2} phase ca. 10% denser than the ambient lattice was stabilized as 3–10 nm sized cubo-octahedral nanoparticles but as abnormal large-sized (up to 30 nm) ones when encapsulated by the C{sub 1−x}Si{sub x}:H multiple shell with defective graphite-like structure units to exert an effective compressive stress. The potential application of such core–shell nanostructure with enhanced binding of Zr and O ions and implication for natural dynamic occurrence of the C{sub 1−x}Si{sub x}:H phase are addressed. - Graphical abstract: Lattice image of a typical cubic-ZrO{sub 2} particle densified by the turbostratic Si{sub x}C{sub 1−x}:H shell. Highlights: ► Turbostratic C–Si–H lamellar phase and ZrO{sub 2} condensates were synthesized by PLA. ► The c-ZrO{sub 2} phase ca. 10% denser than the ambient lattice was stabilized as 3–10 nm. ► The c-ZrO{sub 2} particles up to 30 nm were densified when encapsulated by the C{sub 1−x}Si{sub x}:H multiple shell. ► Tight ion binding of the c-ZrO{sub 2} due to capillarity force and turbostratic shell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗