Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Fiber Laser Welding–Brazing Characteristics of Dissimilar Metals AZ31B Mg Alloys to Copper with Mg-Based Filler

Fiber laser welding–brazing of 1-mm-thick AZ31B Mg alloys to 1.5-mm-thick copper (T2) with Mg-based filler was performed in a lap configuration. The weld appearance, interfacial microstructure and mechanical properties were investigated with different heat inputs. The results indicated that processing windows for optimizing appropriate welding parameters were relatively narrow in this case. Visually acceptable joints with certain strength were achieved at appropriate welding parameters. The maximum tensile-shear fracture load of laser-welded-brazed Mg/Cu joint could reach 1730 N at the laser power of 1200 W, representing 64.1% joint efficiency relative to AZ31Mg base metal. The eutectic structure (α-Mg + Mg{sub 2}Cu) and Mg-Cu intermetallic compound was observed at the Mg/Cu interface, and Mg-Al-Cu ternary intermetallic compound were identified between intermetallics and eutectic structure at high heat input. All the joints fractured at the Mg-Cu interface. However, the fracture mode was found to differ. For laser power of 1200 W, the surface was characterized by tearing edge, while that with poor joint strength was almost dominated by smooth surface or flat tear pattern.

36 MATERIALS SCIENCE↗

Build orientation, surface roughness, and scan path influence on the microstructure, mechanical properties, and flexural fatigue behavior of Ti–6Al–4V fabricated by electron beam melting

In the present work, microstructure and fatigue behavior of Electron Beam Melted (EBM) Ti–6Al–4V have been systematically studied. Fatigue behavior was investigated using four-point bend tests of rectangular bars with internal features fabricated with different build orientations, scan paths, and surface conditions. Microstructural variations were evaluated by optical microscopy and Vickers micro-hardness indentations, both of which were found to be consistent throughout the build and within ranges reported in the literature. The fatigue performance of the EBM material was comparable to wrought Ti–6Al–4V when the loading direction was parallel to the build direction, but severely limited when loaded perpendicular to the build direction or if surface roughness defects were present. Scanning electron microscopy and interrupted fatigue tests were utilized to characterize fracture surfaces, failure mechanisms, crack initiation, and propagation behavior. Crack initiation sites in the vertically-oriented specimens were identified to be melt-related defects formed by insufficient melting.

36 MATERIALS SCIENCE↗

Surface Reconstructions of Metal Oxides and the Consequences on Catalytic Chemistry

Catalysts are inherently vital in nature, as they respond to the environment by changing their local and extended structures. Surface reconstruction is among such dynamic behaviors of catalysts and greatly affects the physical, chemical, and electronic properties of catalysts and consequently the catalytic performances. Thus, understanding the nature of the catalytic sites of the reconstructed surfaces is essential for establishing the structure–catalysis relations and has attracted much interest in catalysis research. Knowledge of the reconstruction of metal oxides has been quite limited in comparison to that of metal surfaces because the nature of oxide surfaces is generally more complex. However, significant progress has been made in recent years in oxide surfaces thanks to the advances in the ability to synthesize model oxide nanocrystals and to characterize the surface reconstruction behaviors under in situ and operando conditions with advanced spectroscopy and microscopy aided by computational modeling. In this Perspective, such advances in understanding the surface reconstruction behaviors of metal oxide nanoshapes and thin films with well-defined surface structures under as-synthesized, various pretreatment, and reaction environments will be summarized, and the catalytic consequences of these reconstructions will be highlighted. The results from these studies clearly show that the combination of model oxides and in situ/operando investigations is imperative in shaping the fundamental understanding of the dynamic reconstructions of oxide surfaces. Yet, it is still difficult to study the surface reconstructions of oxide catalysts with meaningful temporal and spatial resolution under operating conditions. Future opportunities are discussed on how to address the challenges and eventually help to design more efficient catalysts by taking advantages of the surface reconstructions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic anisotropy in ultrathin Fe films on GaAs, ZnSe, and Ge (001) substrates

We discuss magnetic anisotropy parameters of ferromagnetic body-centered cubic (bcc) Fe films grown by molecular beam epitaxy (MBE) on (001) substrates of face-centered cubic (fcc) GaAs, ZnSe, and Ge. High-quality MBE growth of these metal/semiconductor combinations is made possible by the fortuitous atomic relationship between the bcc Fe and the underlying fcc semiconductor surfaces, resulting in excellent lattice match. Magnetization measurements by superconducting quantum interference device (SQUID) indicate that the Fe films grown on (001) GaAs surfaces are characterized by a very strong uniaxial in-plane anisotropy; those grown on (001) Ge surfaces have a fully cubic anisotropy; and Fe films grown on ZnSe represent an intermediate case between the preceding two combinations. Ferromagnetic resonance measurements carried out on these three systems provide a strikingly clear quantitative picture of the anisotropy parameters, in excellent agreement with the SQUID results. Based on these results, we propose that the observed anisotropy of cubic Fe films grown in this way results from the surface reconstruction of the specific semiconductor substrate on which the Fe film is deposited. These results suggest that, by controlling surface reconstruction of the substrate during the MBE growth, one may be able to engineer the magnetic anisotropy in Fe, and possibly also in other MBE-grown ferromagnetic films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decimeter-Wavelength Polarimetric Radar Imaging of the Icy Moons of Jupiter

Imaging radars with wavelengths in the range of 10 cm to 1 m can deeply penetrate the surface of an icy body, revealing details of the geomorphology, local structure, and electrical properties of the upper layers. Radar studies of icy surfaces on Earth have used the polarization state of backscatter echoes at multiple frequencies to characterize the surface and subsurface properties of glaciers, showing relatively smooth surfaces on the scale of radar wave-lengths, and subsurface scattering from volume scatterers consistent with ice pipes and lenses. These volume scattering effects are evident in enhanced polarization ratios over a limited range of backscatter incidence angles. The Galilean satellites exhibit similarly enhanced polarization ratios and volumetric scattering effects, but the observations are limited in angular resolution, leading to ambiguity in interpreting the scattering mechanisms and their structural implications.

Rosen, P. A.↗

Viscosity of the Mercurian Magma Ocean: Implications of Sulfur-Free and Sulfur-Bearing Magma Oceans for Differentiation and Crustal Petrogenesis

Mercury is believed to have had a magma ocean in its early evolution whose solidification dynamics contributed to the planet’s present day surface composition. The surface is characterized by two main geological provinces; the Northern Smooth Plains (NSP),and the Heavily Cratered Terrain (HCT) and Intercratered Terrian (IcT). These provinces are defined by the differences in morphology, composition, and age. The NSP are located in the northern hemisphere and have low Mg/Si, Ca/Si, and S/Si ratios and high Al/Si ratios, and are compositionally analogous to a magnesian alkali basalt. The HCT/IcT cover the majority of the planet and are older than the NSP, and are characterized by high Mg/Si, Ca/Si, and S/Si ratios and low Al/Si ratios. The dichotomy in surface composition motivates the study into the structure of the mantle as a product of magma ocean solidification. Two important and interrelated parameters that determine the efficiency of crystal fractionation during magma ocean solidification are convection vigor and viscosity of the magma ocean. Crystal suspension in a cooling magma ocean could be efficient or inefficient which suggests two end member possibilities for magma ocean solidification. The first is the formation of a compositionally stratified mantle reflecting a cumulate sequence produced along a fractional liquid line of descent. The second is the formation of a well-mixed, batch crystallized mantle by high viscosity and/or vigorously convecting magma ocean. Determining which of these end members, or where on the spectrum between them is most relevant to Mercury’s magma ocean can be experimentally constrained through high P-T falling-sphere viscometry experiments.

Mouser, M. D.↗

Development of Robotic Multisensor Inspection System for Used Nuclear Fuel Canisters

Dry storage of used nuclear fuel is an integral part of the fuel cycle and methods to inspect the canisters that confine the used fuel rods are being established. The challenges for inspection systems include geometric constraints, elevated temperature, and radiation. A novel robotic inspection system focusing on stress corrosion cracking capable of in-situ surface composition characterization and crack detection is under development. The delivery system, laser induced breakdown spectroscopy for surface composition, and ultrasonic guided waves for crack detection are summarized herein. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantitative Infrared-to-Terahertz Nanospectroscopy of Semiconductors

Semiconductor technology now employs few-nanometer features, necessitating tools probing electronic properties on the same length scale. While the concentration of free charge carriers is routinely measured, the scattering rate remains challenging to access at the nanoscale. Here, we present ultrabroadband (5–50 THz) synchrotron infrared nanospectroscopy as a quantitative metrology tool for semiconductors. This technique can determine both the charge carrier concentration and scattering rate with percent-level accuracy, and it is inherently capable of ∼10 nm spatial resolution. We study silicon with different doping levels and confirm the method’s accuracy by statistical analysis and comparison with established far-field infrared spectroscopy. Near-field measurements systematically reveal charge-carrier concentrations ∼30% lower than far-field values, consistent with increased surface sensitivity and surface depletion. Our work establishes synchrotron infrared nanospectroscopy as a precise tool for quantitative nanoscale semiconductor characterization and paves the way toward all-optical characterization of surface depletion effects.

36 MATERIALS SCIENCE↗

Electronic States of Nanosystems Based on Cadmium Sulfide in the Zinc-Blende Form

The electronic structure of nanosystems based on cadmium sulfide in the zinc-blende form (zb-CdS) is investigated using the method of density functional theory with the application of pseudopotentials. It is shown that this approach makes it possible to adequately describe the electronic states of this material. It is found that the (100)-zb-CdS surface is characterized by a metal-like electronic-state density, while the (110)-zb-CdS surface corresponds to the band gap at the Fermi level and nanofilms with this orientation can be used as a material for semiconductor devices. Epitaxial layered (110)-zb-CdS–Si nanosystems also manifest semiconductor properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding of catalysis on early transition metal oxide-based catalysts through exploration of surface structure and chemistry during catalysis using in-situ approaches

Two main categories of heterogeneous catalysts are metal and metal oxide which catalyze 80% chemical reactions at solid-gas and solid-liquid interfaces. Metal oxide catalysts are much more complicated than metal catalysts. The reason is that the cations of the metal atoms could exhibit a few different oxidation states on surface of the same catalyst particle such as Co 3 O 4 or change of their oxidation states under different reactive environments. For a metal catalyst, there is only one oxidation state typically. In addition, surface of a metal oxide can be terminated with multiple surface functionalities including O atoms with different binding configurations and OH group. For metal, only metal atoms are exposed typically. Obviously, the complication of surface chemistry and structure of a metal oxide makes studies of surface of an oxide catalyst very challenging. Due to the complication of surface of a meal oxide, the electronic and geometric structures of surface of a metal oxide and the exposed species have received enormous attention since oxide catalysts catalyze at least 1/3 chemical reactions in chemical and energy industries. Understanding of catalytic reactions on early transition metal oxide-based catalysts is fundamentally intriguing and of great practical interest in energy- and environment-related catalysis. Exploration of surface chemistry of oxide-based catalysts at molecular level during catalysis has remained challenging though it is critical in deeply understanding catalysis on oxide-based catalysts and developing oxide-based catalysts with high activity and selectivity. Thus, the overall objective of this project is to explore surface chemistry and structure of early transition metal oxide-based catalysts through in-situ characterization of surface of catalysts, measurements of catalytic performances, and then build an intrinsic correlation of surface chemistry and structure with their catalytic performances in a few important catalytic reactions, and essentially fundamentally understand catalytic mechanism. Furthermore, this correlation will guide the design of catalysts with high activity and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Materials and Surfaces for Lunar Regolith Adherence Characterization (RAC) Payload Samples

As the quest for long term lunar exploration and habitation comes closer to reality, widespread efforts are ongoing to effectively mitigate lunar dust surface contamination and infiltration. This dust is hazardous to humans and tends to adhere tenaciously to all exposed surfaces, causing performance issues and ultimately failure. While several active and passive technologies have been developed to address this challenge, assessing the performance of these technologies in the actual lunar environment is extremely important. The regolith adherence characterization (RAC) experiment payload provides an important opportunity for this evaluation. The RAC payload is designed by Alpha Space for the National Aeronautics and Space Administration (NASA)and scheduled to be flown to the moon in 2023 on the Firefly Aerospace Blue Ghost lander. As there were a limited number of slots available for materials to be chosen for this mission, it was critical to make an informed selection. Two polymers, a carbon fiber reinforced composite and a metal alloy were chosen to be a diverse selection of structural materials from NASA Langley Research Center. Each material was topographically modified using laser ablation patterning. This article briefly describes the selection and testing procedure and some of the results obtained for the passive dust mitigating materials and surfaces selected for this lunar surface experiment.

Lunar Dust↗

Impacts of the Additive Manufacturing Process on the Roughness of Engine Scale Vanes and Cooling Channels

Abstract By leveraging the additive manufacturing (AM) platform, development time and costs for turbine component testing can be reduced relative to traditional investment casting. Surface roughness is a key characteristic of the additive manufacturing process that can impact flow, heat transfer, and mechanical integrity of printed components. There are multiple design and build considerations that result in variability in surface roughness, especially when additively fabricating complicated three-dimensional vanes and internal cooling passages. This study characterizes the surface roughness of internal cooling passages, vanes, and flat external surface samples made using additive manufacturing, specifically the direct metal laser sintering process. The samples were manufactured with various wall thicknesses, layer thicknesses, build locations, build directions, and on different AM machines. A combination of computed tomography scanning and optical profilometry was used to evaluate surface roughness levels. The data indicate that the dominant factors in roughness for a given layer thickness are a function of wall thickness, build location, and build direction.

Engineering↗

Surface measuring technique

Measurement of the surface contour of a large electrostatically formed concave reflector using a modified Foucault or knife edge test is described. The curve of the actual electrostatically formed reflector surface is compared to a curve representing a reference sphere. Measurements of surface slope and deviation are calculated every 15 cm along the reflector's horizontal and vertical diameters. Characterization of surface roughness on a small scale compared to the laser spot size at the reflector are obtained from the increased laser spot size at a distant projection screen.

Spiers, R. B., Jr.↗

An investigation of the degradation of Fluorinated Ethylene Propylene (FEP) copolymer thermal blanketing materials aboard LDEF in the laboratory

Samples of fluorinated ethylene propylene copolymer thermal blanketing material, recovered from the Long Duration Exposure Facility (LDEF), were investigated to determine the nature and the extent of degradation due to exposure to the low-Earth-orbit environment. Samples recovered from the ram-facing direction of LDEF, which received vacuum-ultraviolet (VUV) radiation and atomic-oxygen impingement, and samples from the trailing edge, which received almost exclusively VUV exposure, were investigated by scanning electron microscopy and atomic force microscopy. The most significant result of this investigation was found on samples that received only VUV exposure. These samples possessed a hard, embrittled surface layer that was absent from the atomic-oxygen exposed sample and from unexposed control samples. This surface layer is believed to be responsible for the 'synergistic' effect between VUV and atomic oxygen. Overall, the investigation revealed dramatically different morphologies for the two samples. The sample receiving both atomic-oxygen and VUV exposure was deeply eroded and had a characteristic 'rolling' surface morphology, while the sample that received only VUV exposure showed mild erosion and a surface morphology characterized by sharp high-frequency peaks. The morphologies observed in the LDEF samples, including the embrittled surface layer, were successfully duplicated in the laboratory.

Stiegman, A. E.↗

The Martian Surface Boundary Layer

The acquisition of meteorological data from the surface of Mars by the two Viking Landers and Mars Pathfinder make it possible to estimate atmospheric boundary layer parameters and surface properties at three different locations on the planet. Because the Martian atmosphere is so thin the majority of the solar radiance is converted to heat at the surface. The difference between surface and atmospheric temperature can also constraint surface albedo, thermal inertia, and infrared emissivity. The Mars Pathfinder Atmospheric Structure Instrument/Meteorological package (ASI/MET) was the most capable weather monitoring system ever sent to the surface of another planet to date. One of the prime objectives of the ASI/MET package is to characterize the surface boundary layer parameters, particularly the heat and momentum fluxes, scaling temperature and friction velocity, and estimate surface roughness. Other important boundary layer parameters, such as Richardson Number, Monin-Obukhov length, analysis of turbulence characteristics of wind and temperature, and atmospheric stability class can also be determined from these measurements.

Wilson, G. R.↗

Characterizing the System Impulse Response Function from Photon-Counting LiDAR Data

NASA's Multiple Altimeter Beam Experimental LiDAR (MABEL) is an aircraft-based photon-counting laser altimeter designed as a simulator to test measurement techniques and algorithms for Advanced Topographic Laser Altimeter System (ATLAS), the sole instrument on NASA's Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission. By measuring the time of flight, pointing angle, and absolute position for individual photons, ICESat-2 provides detailed elevation measurements of earth's surface. Calculating accurate and precise elevations requires an understanding of how photons interact with surfaces, and characterization of the photon distribution after returning from surfaces. Neither MABEL nor ATLAS records the transmitted laser pulse shape, relying instead on aggregating several pulses worth of photons, often using histograms, to characterize the pulse shape. In this paper, we assess the limitations of using histograms and propose a more robust method to describe MABEL's system impulse-response function using an exponentially modified Gaussian distribution. We also provide standard error estimates for the arithmetic mean and standard deviation calculations, and for exponentially modified Gaussian parameters using a Monte Carlo sensitivity analysis. We apply this method to photon returns from a sea ice lead and from a dry salt lake bed as case studies for estimating the standard error associated with sample size for the arithmetic mean and standard deviation, and for the exponentially modified Gaussian parameters. We use these standard errors to calculate the minimum number of photons required to find both Gaussian and exponentially modified Gaussian distribution parameters within 3 cm of their parent population values.

photoncounting↗

Effect of surface nanostructuring on corrosion behavior of Ti–6Al–4V alloy

Surface nanostructure was induced in Ti–6Al–4V alloy by ultrasonic shot peening (USSP) for different durations, from 15 s to 30 min, and the modified surface was characterized by optical, scanning, atomic force and transmission electron microscopy. Nano size grains were observed to form on surface of the USSPed samples and surface roughness was increased with duration of USSP. Polarization study was carried out in Ringer's solution to examine the effect of surface nanostructuring on corrosion resistance of this alloy. Electrochemical corrosion was carried out for all the USSPed specimens as well as the non-USSPed sample in Ringer's solution. Surface morphology of the corroded samples was examined by SEM. In general, corrosion resistance was improved by USSP up to the duration of 15 min and there was maximum improvement in the specimen USSPed for 1 min. However, corrosion resistance was drastically reduced due to USSP for long duration of 30 min. - Highlights: •Nanostructure was induced by USSP on alloy Ti–6Al–4V of about 28 nm. •Grain refinement was confirmed by XRD and TEM. •USSP is an effective technique for the improvement in corrosion resistance. •Nanostructured surface promotes formation of protective surface layer of TiO{sub 2}.

36 MATERIALS SCIENCE↗