Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Optical and morphological properties of sol gel derived titanium dioxide films

Titanium oxide (Titania) thin films were synthesized on different substrates via the sol-gel dip-coating method using alkoxide solution. Some selected samples were also prepared with different percentage of Lead (Pb). The influence of Pb addition in precursor sol on the optical properties of titanium dioxide thin films was studied. The optical transmittance in the visible region has increased with increase in weight percentage of lead. The refractive index was slightly decreased with Pb addition. Crystallization of these coatings was achieved through thermal annealing at temperatures above 400 °C. The structural properties and surface morphology of the crystallized coatings were studied by Scanning Electron Microscopy. Increase in average grain size from 250 nm to 350 nm with increase in Pb concentration is observed. Films were appeared to more coarse with increase in Pb addition. An increase in Pb addition resulted increase in average roughness from 12 nm to 25 nm.

36 MATERIALS SCIENCE↗

Optimizing the TiO{sub 2} Content to Obtain the Highest Corrosion Resistance in Ir-Ru-Ta-Based Mixed Metal Oxide Coating in Oxygen Evolution Reaction Application

In this article, the role of TiO{sub 2} on deactivation and corrosion mechanism of a MMO coating was assessed in 1 M Na{sub 2}SO{sub 4} solution. The Ti/40IrO{sub 2} + 30RuO{sub 2} + (30 − x)Ta{sub 2}O{sub 5} + (x)TiO{sub 2} anodes were prepared by thermal decomposition method. Surface morphology and microstructure of the coatings were characterized by scanning electron microscopy, energy-dispersive spectroscopy and grazing incidence x-ray diffraction analysis. The electrochemical properties and corrosion behavior of these coatings were performed by accelerated lifetime test, investigation of active surface area (q*) and electrochemical impedance spectroscopy. The results showed that the uniform dissolution of the active surface layers was the main reason behind the anode deactivation. Furthermore, addition of titanium oxide up to 15% to the above-mentioned composition improved the performance of the anode and increased its working life up to 200 h.

36 MATERIALS SCIENCE↗

Growth from Solution, Structure, and Optical Properties of Single-Crystal para-Quaterphenyl Films

Samples of single-crystal para-quaterphenyl films up to 8 mm long and 50 μm thick have been obtained for the first time by the solvent‒antisolvent growth method. The films have been grown both on the liquid–air interface and in the solution bulk. The morphology, surface quality, and thickness of crystal films have been investigated by the optical, laser confocal, and atomic force microscopies. The structure of the para-quaterphenyl single crystal at room temperature has been refined by X-ray diffraction analysis. The formation and growth mechanisms of crystal films on the liquid–air interface have been discussed. The opticalabsorption and photoluminescence spectra of the solutions and crystal samples have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substrate roughness on c-oriented AlN thin films

(001)-textured AlN thin films as needed for bulk acoustic wave devices exhibit large mechanical stress variations as a function of growth substrate properties. We studied the relationship between stress and the surface morphology of a thermally oxidized silicon substrate that was modified by a thin amorphous silicon layer. A rms roughness of 0.1-1.1 nm of the latter resulted in an increase in mechanical stress in the subsequently sputtered AlN thin film going from -700 to +200 MPa. At the same time, the x-ray rocking curve width of AlN increased from 1.3 deg. to 2.3 deg. The roughness of the Si interlayer was controlled by the Ar sputter pressure. Interestingly, the maximal roughness is obtained at an intermediate pressure. This is explained by an interplay of nucleation and diffusion phenomena governed by the kinetics of impinging atoms and ions. The Si interlayer was essential to avoid cracking of membranes exhibiting mixed Pt and SiO{sub 2} surfaces below the AlN film.

36 MATERIALS SCIENCE↗

InGaN: Direct correlation of nanoscopic morphology features with optical and structural properties

A comprehensive study on the impact of growth modes on the structural and optical properties of thick InGaN layers suitable for photovoltaic application is presented. Samples grown by metalorganic vapour phase epitaxy with different growth rates and thicknesses have been analyzed. The application of slow growth rates result in smooth layers while higher growth rates induce a meandering surface morphology. Using low-temperature cathodoluminescence, a direct correlation of the morphology to local luminescent properties is obtained: the top of meandering structures reveals a spectrally red-shifted emission compared to the emission wavelength expected from the average indium content determined by X-ray diffraction. The origin of this shift is identified and explained by increased indium incorporation on top of the meander due to a spatially localized compositional pulling effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface diffusion driven morphological instability in free-standing nickel nanorod arrays

Metallic nanostructures are thermodynamically unstable due to the excess of energy of large numbers of surface atoms. Morphological instability, such as Rayleigh breakup, sintering, and coalescence, can be observed at a temperature much lower than the bulk melting point of the metal. We study the morphological and crystalline evolution of well-aligned free-standing nickel nanorod arrays at elevated temperatures up to 600 °C. The as-deposited nickel nanorods are faceted with sharp nanotips, which are deformed at annealing temperatures higher than 400 °C due to strong surface diffusion. A mud-crack like pattern is formed in the samples annealed above 400 °C, leading to the generation of interconnected porous structure. Meanwhile, the X-ray diffraction reveals the recrystallization of nickel nanocrystals when annealed from 300 to 600 °C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photocatalytic degradation of methylene blue on Sn-doped titania nanoparticles synthesized by solution combustion route

Highlights: • Series of Sn-doped titania nanoparticles were prepared by solution combustion synthesis method. • Sn-doped titania nanoparticles were tested for degradation of MB under UV light irradiation. • The maximum Sn doping in the TiO{sub 2} lattice is found to be less than 10%. • The crystallite size decreases with increase in the Sn content. • The doping of Sn into TiO{sub 2} lattice hinders the recombination of electrons and holes thus enhance the photocatalytic activity. - Abstract: Series of tin-doped titania nanoparticles with varying tin content in the range 0–20 mol% have been prepared by solution combustion synthesis route using urea as a fuel. The structure, surface morphology and optical activity of Sn-doped TiO{sub 2} nanoparticles were investigated by various analytical techniques such as powder XRD, SEM, TEM, UV–vis and N{sub 2} adsorption study. The crystalline structures of the various phases were studied by rietveld refinement of the XRD data. The photocatalytic performance of Sn-doped titania nanoparticles were tested for degradation of MB under UV and visible light irradiation. The results reveal that the photocatalytic activity increases with increase in tin content which may be due to decrease in crystallite size with increase in surface area. The doping of Sn into TiO{sub 2} lattice hinders the recombination of electrons and holes thus enhance the quantum efficiency of photocatalytic reaction.

36 MATERIALS SCIENCE↗

Effects of Multiple Laser Peening impacts on Mechanical Properties and Microstructure Evolution of 40CrNiMo Steel

The effects of multiple laser peening impacts on mechanical properties and microstructure of 40CrNiMo steel were investigated. The surface residual stress and microhardness of the samples with different treatments were measured. The surface morphologies, tensile behavior and microstructure of the samples before and after laser peening were compared and analyzed. The experimental results showed that laser peening, especially multiple laser peening impacts has significant effects on the microhardness, residual stress and microstructure of 40CrNiMo steel. The surface roughness and the depth of the pit increased with increasing the impact times. After 3 laser peening impacts, the surface microhardness, compressive residual stress, the strength and ductility were significantly improved. Meanwhile, some microstructures, such as sub-grains, the precipitation of carbide and dislocations were also induced in the surface layer. Additionally, the microscopic strengthening mechanism of multiple laser peening impacts on the mechanical properties of 40CrNiMo steel was analyzed in detail.

36 MATERIALS SCIENCE↗

Highly ordered self-assembled nanoscale periodic faceting in GaAs(631) homoepitaxial growth

We report on the self-assembly of large-order-correlated nanoscale faceting on GaAs(631)A substrates grown by molecular beam epitaxy. The surface morphology of the grown samples as a function of the growth temperature and the As-beam equivalent pressure was studied using atomic force microscopy. A two-dimensional autocorrelation function analysis was performed in order to quantitatively determine the uniformity of the surface corrugation. By optimizing the growth conditions, correlated faceted areas as large as 1.7 Multiplication-Sign 1.7 {mu}m{sup 2} are obtained. The highly ordered surface corrugation discussed here provides useful insights to prepare highly ordered facet planes for the self organized growth of quantum wires.

36 MATERIALS SCIENCE↗

Surface plasmon resonance in nanostructured Ag incorporated ZnS films

Silver incorporated zinc sulfide thin films are prepared by RF magnetron sputtering technique and the influence of silver incorporation on the structural, optical and luminescence properties is analyzed using techniques like grazing incidence X-Ray diffraction (GIXRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), micro-Raman spectroscopy, UV-Vis spectroscopy and laser photoluminescence spectroscopy. XRD analysis presents hexagonal wurtzite structure for the films. A reduction of crystallinity of the films is observed due to Ag incorporation. The Raman spectral analysis confirms the reduction of crystallinity and increase of strain due to the Ag incorporation. AFM analysis reveals a rough surface morphology for the undoped film and Ag incorporation makes the films uniform, dense and smooth. A blue shift of band gap energy with increase in Ag incorporation is observed due to quantum confinement effect. An absorption band (450-650 nm region) due to surface plasmon resonance of the Ag clusters present in the ZnS matrix is observed for the samples with higher Ag incorporation. The complex dielectric constant, loss factor and distribution of volume and surface energy loss of the ZnS thin films are calculated. Laser photoluminescence measurements gives an intense bluish green emission from the ZnS films and a quenching of the PL emission is observed which can be due to the metal plasmonic absorption and non-radiative energy transfer due to Ag incorporation.

36 MATERIALS SCIENCE↗

Correlation of shape changes of grain surfaces and reversible stress evolution during interruptions of polycrystalline film growth

Short interruptions of the growth of polycrystalline films often lead to stress evolution that is reversed when growth is resumed. Correlated in situ stress measurements and ex situ transmission electron microscopy and atomic force microscopy characterizations of grain boundary surface grooves as a function of the interruption time are reported for films deposited at different temperatures and held for different times before quenching to room temperature. These studies suggest that during film deposition surface grooves at grain boundaries are kinetically constrained to be shallow, while during a growth interruption surface diffusion allows grain boundary grooves to deepen and approach their equilibrium depth. The latter relieves a component of the compressive stress associated with trapped atoms in the grain boundaries. When growth is resumed, the non-equilibrium surface morphology is reestablished and the compressive stress increases to its pre-interruption value.

36 MATERIALS SCIENCE↗

Aqueous phase deposition of dense tin oxide films with nano-structured surfaces

Dense tin oxide films were successfully fabricated in an aqueous solution. The pH of the solutions was controlled to pH 1.3 by addition of HCl. Precise control of solution condition and crystal growth allowed us to obtain dense tin oxide films. Concave–convex surface of fluorine-doped tin oxide (FTO) substrates was entirely-covered with the continuous films. The films were about 65 nm in thickness and had nano-structured surfaces. Morphology of the films was strikingly different from our previous reported nano-sheet assembled structures. The films were not removed from the substrates by strong water flow or air blow to show strong adhesion strength. The aqueous solution process can be applied to surface coating of various materials such as nano/micro-structured surfaces, particles, fibers, polymers, metals or biomaterials. - Graphical abstract: Dense tin oxide films of 65 nm were successfully fabricated in an aqueous solution. They had nano-structured surfaces. Concave-convex substrates were entirely-covered with the continuous films. - Highlights: • Dense tin oxide films of 65 nm were successfully fabricated in an aqueous solution. • They had nano-structured surfaces. • Concave–convex substrates were entirely-covered with the continuous films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of period and amplitude of microwaviness on KH{sub 2}PO{sub 4} crystal's laser damage threshold

The laser induced damage threshold (LIDT) has become a technical bottleneck which restricts the application and development of the inertial confinement fusion. Using single point diamond turning method to process KH{sub 2}PO{sub 4} (KDP) crystals, the periodic microwaviness will be left on the machined surface which has a significant impact on the LIDT. In this paper, after acquiring the frequency information of machined surface of KDP crystals with the power spectral density method, we analyze quantitatively the influence of microwaviness on the LIDT of KDP crystal with the Fourier modal theory. Research results indicate that: the surface morphology of KDP crystal is consisted of the subwaviness with different characteristic spatial frequencies; and the reduced amount of the LIDT of KDP crystal leaded by such subwaviness is different; the experimental results of the LIDT are consistent with the theoretical calculations basically; for the machine tool and the processing technology we used, the leading frequency of microwaviness which caused the LIDT decreasing is between (350 {mu}m){sup -1} and (30 {mu}m){sup -1}, especially between (90 {mu}m){sup -1} and (180 {mu}m){sup -1}.

36 MATERIALS SCIENCE↗

Evaluation of the effect of organic pro-degradant concentration in polypropylene exposed to the natural ageing

The production and consumption of plastics in the last decade has recorded a remarkable increase in the scientific and industrial interest in environmentally degradable polymer (EDPs). Polymers wastes are deposited improperly, such as dumps, landfills, rivers and seas, causing a serious problem by the accumulation in the environment. The abiotic processes, like the photodegradation, are the most efficient occurring in the open environmental, where the polymers undergo degradation from the action of sunlight that result from direct exposure to solar radiation, however depend of the type of chemical ageing, which is the principal component of climatic ageing. The subject of this work is to study the influence of concentration of organic pro-degradant (1, 2 and 3 % w/w) in the polypropylene (PP) exposed in natural ageing. PP samples with and without the additive were processed in plates square form, obtained by thermal compression molding (TCM) using a press at 200°C under 2 tons for 5 min, and then were exposed at natural ageing during 120 days. The presence of organic additive influenced on PP degradability, this fact was assessed by changes in the thermal and morphology properties of the samples after 120 days of natural ageing. Scanning Electronic Microscopy (SEM) results of the morphological surface of the modified PP samples showed greater degradation photochemical oxidative when compared to neat PP, due to increase of rugosity and formation of microvoids. PP samples with different pro-degradant concentration under natural ageing presented a degree of crystallinity, obtained by Differential Scanning Calorimeter (DSC) increases in comparing the neat PP.

36 MATERIALS SCIENCE↗

Thermal stability and tribological properties of CrZr-Si-N films synthesized by closed field unbalanced magnetron sputtering

In this work, CrZr-Si-N films with various Si contents ({<=}6.4 at. %) were synthesized by closed field unbalanced magnetron sputtering with vertical magnetron sources. The characteristics such as hardness, surface morphology, and friction coefficient of the films as a function of the Si content after annealing up to 500 degree sign C in air were evaluated. Results revealed that the as-deposited films showed very similar characteristics irrespective of the Si content. However, after annealing at 500 degree sign C, the film characteristics showed a strong dependency upon the Si content. After annealing at 500 degree sign C, the hardness of the Cr{sub 39.4}Zr{sub 12.3}N{sub 48.3} film decreased significantly to approximately 24 GPa and the surface roughness value increased approximately 3.5 times more than that of the as-deposited film. The Cr{sub 34.6}Zr{sub 10.6}-Si{sub 6.4}-N{sub 48.4} film, however, was observed to have a hardness of approximately 30 GPa, which is close to that of the as-deposited film, 32 GPa. In addition, as the wear test temperature increased from room temperature to 500 degree sign C, the average friction coefficient of the Cr{sub 39.4}Zr{sub 12.3}N{sub 48.3} film increased significantly from approximately 0.23 to 0.81, but the average friction coefficient of the Cr{sub 34.6}Zr{sub 10.6}-Si{sub 6.4}-N{sub 48.4} film was not changed extensively, measuring approximately 0.43. These results could be attributed to the improvement of the thermal stability by adding Si into the Cr-Zr-N films.

36 MATERIALS SCIENCE↗

Sodium Dodecyl Sulfate–Mediated Graphene Sensor for Electrochemical Detection of the Antibiotic Drug: Ciprofloxacin

The present study involves detecting and determining CIP by a new electrochemical sensor based on graphene (Gr) in the presence of sodium dodecyl sulfate (SDS) employing voltammetric techniques. Surface morphology studies of the sensing material were analyzed using a scanning electron microscope (SEM) and atomic force microscope (AFM). In the electroanalysis of CIP at the developed electrode, an enhanced anodic peak response was recorded, suggesting the electro-oxidation of CIP at the electrode surface. Furthermore, we evaluated the impact of the electrolytic solution, scan rate, accumulation time, and concentration variation on the electrochemical behavior of CIP. The possible electrode mechanism was proposed based on the acquired experimental information. A concentration variation study was performed using differential pulse voltammetry (DPV) in the lower concentration range, and the fabricated electrode achieved a detection limit of 2.9 × 10 -8 M. The proposed sensor detected CIP in pharmaceutical and biological samples. The findings displayed good recovery, with 93.8% for tablet analysis and 93.3% to 98.7% for urine analysis. The stability of a developed electrode was tested by inter- and intraday analysis.

36 MATERIALS SCIENCE↗

Isolated nano-tendril bundles on tungsten surfaces exposed to radiofrequency helium plasma

The DIONISOS experiment is used to study the impact of RF helium (He) plasma on the surface morphology of tungsten (W). Modulation of incident He ion energy with a span on the order of 50 eV and below the sputtering threshold at a frequency of 13.56 MHz results in nano-tendril bundles (NTBs) and free-standing W whiskers on the surface at 1020 K. The NTBs are distributed intra-granularly with coverage of less than 10% while reaching up to 30 microns normal to the surface for He ion fluence of 5.8 x 10^25 m^-2 and a flux density of 1.0 x 10^22 m^-2 s^-1. Analysis of the NTB interior and sub-surface structure is provided through focused ion beam cross section.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scanning Transmission X-ray Microscopy: Applications in Atmospheric Aerosol Research

Scanning transmission x-ray microscopy (STXM) combines x-ray microscopy and near edge x-ray absorption fine structure spectroscopy (NEXAFS). This combination provides spatially resolved bonding and oxidation state information. While there are reviews relevant to STXM/NEXAFS applications in other environmental fields (and magnetic materials) this chapter focuses on atmospheric aerosols. It provides an introduction to this technique in a manner approachable to non-experts. It begins with relevant background information on synchrotron radiation sources and a description of NEXAFS spectroscopy. The bulk of the chapter provides a survey of STXM/NEXAFS aerosol studies and is organized according to the type of aerosol investigated. The purpose is to illustrate the current range and recent growth of scientific investigations employing STXM-NEXAFS to probe atmospheric aerosol morphology, surface coatings, mixing states, and atmospheric processing.

47 OTHER INSTRUMENTATION↗