Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Animal exposure during burn tests

An animal exposure test system has been designed and fabricated for the purpose of collecting physiological and environmental (temperature) data from animal subjects exposed to combustion gases in large scale fire tests. The AETS consists of an open wire mesh, two-compartment cage, one containing an exercise wheel for small rodents, and the other containing one rat instrumented externally for electrocardiogram and respiration. The ECG and respiration sensors are located in a belt placed around the torso of the subject, electrode wires forming an umbilical to a connector in the top of the compartment. A cable extends from the connector to the power supply and signal conditioning electronics. These are connected to a dual-beam oscilloscope for real time monitoring and a magnetic tape recorder having three or more channels. Endpoints observed are bradycardia, cardiac arrhythmias, changes in respiratory pattern, respiratory arrest and cardiac arrest. The ECG record also appears to be a good method of monitoring animal activity as indicated by an increase in EMG noise superimposed on the record during increased activity of the torso musculature. Examples of the recordings are presented and discussed as to their significance regarding toxicity of fire gases.

Gaume, J. G.↗

University of Utah four-channel pulse-to-pulse commutated SUPER-LOKI rocket meteorological parachutesonde (electronics)

The electronics and temperature sensing units of the pulse-to-pulse rocketsonde are described. The sonde is designed for the 2 1/8-inch dart of the SUPER-LOKI meteorological rocket. In flight, the sonde descends by parachute from rocket apogees of about 75 kilometers. As the sonde descends, it transmits air temperature data back to ground radio receiving stations.

Atwood, K. W.↗

Remote sensing of atmospheric temperature profiles with the Nimbus 5 microwave spectrometer

The paper discusses the accuracy of atmospheric vertical temperature profile measurements performed by the Nimbus 5 microwave spectrometer and compares results obtained during the first 6 months of its operation with independent ground-truth measurements (coincident radiosonde measurements). The microwave spectrometer can measure temperature profiles averaged over the instrument weighting function (about 10 km) layers with a root-mean-square accuracy of a few tenths of a degree K for measurement integration times of 16 s. Lower tropospheric temperature data from the spectrometer measurements is used in the numerical weather prediction model of the National Meteorological Center.

Waters, J. W.↗

Thermal inertia mapping

A thermal model of the earth's surface has been developed and used to determine the thermal inertia of a test site in the Mojave Desert, California. The model, which includes meteorological heating terms as well as radiation and conduction heating terms, is used with remotely sensed surface temperature data to determine thermal inertia of materials. The thermal inertia is displayed in image form, and can aid in the differentiation of the various lithologic materials in the test site.

Kahle, A. B.↗

Seasat-A - An ocean observation satellite

Mission details, onboard equipment, and measurements to be taken are described for the Seasat-A global ocean monitoring satellite. The satellite is designed for mapping the global ocean geoid, charting ice fields and leads, precision measurement of sea surface topography, global monitoring of wave height and wave directional spectra, surface winds and wind direction, current patterns, and ocean temperature. Data handling subsystems, a compressed pulse radar altimeter, coherent synthetic aperture imaging radar, microwave wind scatterometer, scanning visible/IR radiometer, scanning multispectral (5 freq) microwave radiometer mounted on the satellite are described briefly.

Williams, F. L.↗

Stratospheric long waves - Comparison of thermal structure in the Northern and Southern Hemispheres

Stratospheric radiance and temperature data obtained in the Northern and Southern Hemispheres during 1971 and 1972 are analyzed in order to compare planetary-wave behavior in both hemispheres. The data sources include the reduced radiance data of the Nimbus 4 selective chopper radiometer, National Meteorological Center gridded data, and Eole constant-level balloon data. Large-amplitude wave oscillations with energy in the period range from 20 to 30 days are observed along with the eastward propagation of planetary wave 2 in the Southern Hemisphere and a strong vertical coherence in wave phase at all levels between 200 mb and the upper stratosphere. The results show that: (1) despite stationary forcing, eastward phase progression occurs for wave 2 in the south as well as during the amplification phase of wave 1 in both hemispheres; (2) the upper stratosphere in midwinter contains regions of apparent barotropic instability, especially in the south; (3) wave number 2 amplitudes grow from very low values in early winter to high values in late winter; (4) the meridional amplitude structure is similar in the upper stratosphere in both hemispheres; and (5) the equatorward extent of waves is directly related to zonal wind speed in the upper stratosphere.

Leovy, C. B.↗

Silica heat shield sizing

The sensitivity of silica heat shield requirements to gap width, tile edge radius, and heat transfer distribution within tile gaps was investigated. A two-dimensional thermal model was modified and used to determine the effect of two dimensional heat transfer distributions at high temperature reusable surface insulation edges on shuttle thermal protection system (TPS) requirements. The sensitivity of TPS requirements to coating thickness, emissivity, substructure thickness, and changes in gap heating for several locations on shuttle was also studied. An inverse solution technique was applied to temperature data obtained in the Ames 20 MW turbulent duct in order to examine the effect of tile edge radius on TPS requirements. The derived heating values were then used to predict TPS requirements. Results show that increasing tile radius reduces TPS requirements.

Ebbesmeyer, L. H.↗

ATS-6 mm-wave propagation experiment

Attenuation on a Space-to-Earth path was measured at 20 GHz for a ground terminal at approximately 1 km elevation in an arid (16 cm annual precipitation) region of eastern Washington state. Precipitation intensity and radiometric sky temperature at 20 GHz were also measured. Attenuation greater than 1 dB was observed only in the presence of wet snow on antenna surfaces. Ten thousand (10,000) hours of radiometric sky temperature data recorded over an 18-month period indicated atmospheric attenuation of 5 to 7 dB during two instances of rain intensity of approximately 1 inch per hour.

Davis, C. C.↗

Hybrid temperature-monitoring circuit

Hybrid circuit developed for use in hand-held vital signs monitor converts resistance of thermistor probe to 3 1/2 digit BCD (binary-coded-decimal) temperature readout. If used alone circuit can form 'stand alone' temperature monitor or can transmit temperature data via telemetry to data acquisition systems.

Rinard, G. A.↗

Monitoring changes in upper ocean heat storage from satellites

A one-dimensional model of the upper ocean mixed-layer was developed to determine how the parameters which can be measured from satellites affect the development of the layer. The results show that the form of the dissipation term is important in achieving cyclic annual states, that the layer deepending rate depends on the averaging period for the surface heat flux and wind stress, that wind direction, as well as magnitude, can affect the deepening rate and that horizontal advective effects cannot simply be superimposed on the model results. An algorithm is given which uses satellite derived wind stress and sea surface temperature data to predict real time changes in upper ocean heat storage during the cooling seasons.

Miller, J. R.↗

Boron/aluminum skins for the DC-10 aft pylon

Three boron/aluminum aft pylon 'boat tail' skins were designed, fabricated, and installed on three DC-10 aircraft for a five-year flight service demonstration test. Inspection and tests of the skins will establish the ability of the composite to withstand long-time flight service exposures to high temperatures, sonic fatigue, and flutter. The results of a preliminary testing program yielded room and elevated temperature data on the tension, compression, in-plane shear, interlaminar shear, bolt bearing, and tension fatigue properties of the oriented eleven-ply boron/aluminum laminates, and this information, together with a stress analysis, was used to obtain Federal Aviation Administration approval. Present state-of-the-art technology was used in the fabrication of the skins, and these were installed on the existing titanium substructure with the same number and size mechanical fasteners as are used for the present titanium skins.

Elliott, S. Y.↗

Variable-temperature cryogenic trap for the separation of gas mixtures

The paper describes a continuous variable-temperature U-shaped cold trap which can both purify vacuum-line combustion products for subsequent stable isotopic analysis and isolate the methane and ethane constituents of natural gases. The canister containing the trap is submerged in liquid nitrogen, and, as the gas cools, the gas mixture components condense sequentially according to their relative vapor pressures. After the about 12 min required for the bottom of the trap to reach the liquid-nitrogen temperature, passage of electric current through the resistance wire wrapped around the tubing covering the U-trap permits distillation of successive gas components at optimal temperatures. Data on the separation achieved for two mixtures, the first being typical vacuum-line combustion products of geochemical samples such as rocks and the second being natural gas, are presented, and the thermal behavior and power consumption are reported.

Des Marais, D. J.↗

Discharge forecasts in mountain basins based on satellite snow cover mapping

The author has identified the following significant results. A snow runoff model developed for European mountain basins was used with LANDSAT imagery and air temperature data to simulate runoff in the Rocky Mountains under conditions of large elevation range and moderate cloud cover (cloud cover of 40% or less during LANDSAT passes 70% of the time during a snowmelt season). Favorable results were obtained for basins with area not exceeding serval hundred square kilometers and with a significant component of subsurface runoff.

Martinec, J.↗

Microwave remote sensing of soil moisture content over bare and vegetated fields

The author has identified the following significant results. Ground truth of soil moisture content, and ambient air and soil temperatures were acquired concurrently with measurements of soil moisture in bare fields and fields covered with grass, corn, and soybeans obtained with 1.4 GHz and 5 GHz radiometers mounted on a truck. The biomass of the vegetation was sampled about once a week. The measured brightness temperatures over the bare fields were compared with those of radiative transfer model calculations using as inputs the acquired soil moisture and temperatures data with appropriate values of dielectric constants for soil-water mixtures. A good agreement was found between the calculated and measured results over 10 deg to 70 deg incident angles. The presence of vegetation reduced the sensitivity of soil moisture sensing. At 1.4 GHz the sensitivity reduction ranged from about 20% for 10 cm tall grassland cover to over 50 to 60% for the dense soybean field. At 5 GHz corresponding reduction in sensitivity ranged from approximately 70% to approximately 90%.

Wang, J. R.↗

Temporal variations in regional models of the Sargasso Sea from GEOS-3 altimetry

The paper considers temporal variations in regional models of the Sargasso sea from GEOS-3 telemetry. The methods of regional models and the analysis of overlapping passes are utilized, and short-wave maxima and minima in the regional surface models are examined for correlations with surface and remote sensed infrared temperature data supplemented with subsurface expendable bathythermograph data (XBT). The analysis of overlapping passes provide a better picture of instanteneous sea surface height (SSH) variability through wavelengths greater than 30 km. Correlation studies with cyclonic and anticyclonic ocean eddies from infrared imagery and XBT data indicate satisfactory agreement with equivalent SSH features 98% of the time if the time varying factors are allowed for.

Mather, R. S.↗

Synthesis of peptides from amino acids and ATP with lysine-rich proteinoid

The paper examines the synthesis of peptides from aminoacids and ATP with a lysine-rich protenoid. The latter in aqueous solution catalyzes the formation of peptides from free amino acids and ATP; this catalytic activity is not found in acidic protenoids, even though the latter contain a basic aminoacid. The pH optimum for the synthesis is about 11, but it is appreciable below 8 and above 13. Temperature data indicate an optimum at 20 C or above, with little increase in rate up to 60 C. Pyrophosphate can be used instead of ATP, but the yields are lower. The ATP-aided syntheses of peptides in aqueous solution occur with several types of proteinous aminoacids.

Nakashima, T.↗

Principal normal curvature of surfaces

Certain principal normal curvatures of differential geometry were developed for use in curvature matrices associated with the asymptotic solution of electromagnetic diffraction problems. The effort is directed toward microwave antenna simulations and high speed digital computer analysis of radiometric instruments used to obtain soil moisture, sea state, salinity and temperature data. It is shown that the methods used to develop the principal normal curvatures for paraboloid, hyperboloid, ellipsoid, sphere, and cone can be applied to other radiometer geometries such as the parabolic torus, even though the surface parameterizations are different. It is concluded that deployable offset geometries, distorted by rotational forces and solar loads may be analyzed by similar means given a suitable surface description.

Schmidt, R. F.↗