Search NASA⌕ Search

SEARCH · Search NASA

Results for “value analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Evaluation of microbial release probabilities

Work undertaken to improve the estimation of the probability of release of microorganisms from unmanned Martian landing spacecraft is summarized. An analytical model is described for the development of numerical values for release parameters and release mechanisms applicable to flight missions are defined. Laboratory test data are used to evolve parameter values for use by flight projects in estimating numerical values for release probabilities. The analysis treats microbial burden located on spacecraft surfaces, between mated surfaces, and encapsulated within materials.

Source record↗
NASA NTRS1971

Optimization of conical hydrostatic bearing for minimum friction.

Equations for the flow rate, load capacity, and friction torque for a conical hydrostatic bearing were developed. These equations were solved by a digital computer program to determine bearing configurations for minimum friction torque. Design curves are presented that show optimal bearing dimensions for minimum friction torque as a function of dimensionless flow rate for a range of dimensionless load capacity. Results are shown for both laminar and turbulent flow conditions. The results indicate that hydrostatic pocket friction is a significant portion of the total friction torque. However, the bearing dimensions for a minimum friction design are affected very little by inclusion of pocket friction in the analysis. For laminar flow the values of the outer-land radius ratio X3 and outer bearing radius ratio X4 did not change significantly with increasing friction factor. For turbulent flow, the outer bearing radius ratio X4 did not change with increasing friction factor; therefore the value determined for X4 in the laminar flow case is valid for all turbulent flows.

Nypan, L. J.↗
NASA NTRS1972

Photodetachment of electrons from phosphide ion - The electron affinity of PH2.

Measurement of the relative cross section for photodetachment of electrons from PH2(-) in the wavelength region 725 to 1020 nm (1.71 to 1.22 eV). An ion cyclotron resonance spectrometer was used to generate, trap, and detect the negative ions, and two light sources were employed to study photodetachment: a 1000-W xenon arc lamp with a grating monochromator and a continuously tunable laser. A single sharp threshold in the cross-section curve was observed, and a detailed analysis yielded an electron affinity value of 1.25 plus or minus 0.03 eV.

Smyth, K. C.↗
NASA NTRS1972

Thermal performance of 625-kg/cu m elastomeric ablative materials on spherically blunted 0.44-radian cones

Spherically blunted 0.44-radian (25 deg) half-angle conical models coated with elastomeric ablative materials were tested in supersonic arc-heated wind tunnels to evaluate performance of the ablators over a range of conditions typical of lifting entry. Four test conditions were combinations of stagnation point-heat transfer rates of 2.3 and 4.5 MW/m2 and stagnation pressures of 20 and 2kN/m2. Afterbody values of heat transfer rate and pressure were 0.05 to 0.20 of stagnation point values. Stagnation enthalpy varied from 4.4 to 25 MJ/kg (1900 to 11000 Btu/lbm) and free-stream Mach number was in a range from 3.5 to 4. Ablative materials retained the spherical nose shape throughout tests at the lower heat transfer level, but receded, assuming a flattened nose shape, during tests at the high heat transfer level. The residue layer that formed on the conical after-body was weak, friable, and extensively cracked. The reference ablative material, which contained phenolic microspheres, generally retained the conical shape on the model afterbody. However, a modified ablator, in which phenolic microspheres were replaced with silica microspheres, deformed and separated from the undegraded material, and thereby produced a very uneven surface. Substrate temperatures and ablator recession were in good agreement with values computed by a numerical analysis.

Champman, A. J.↗
NASA NTRS1974

Determination of critical nondimensional parameters in aircraft dynamic response to random input

The critical parameters of subsonic jet aircraft response in a random atmospheric environment are determined. Equations of motion are presented for semirigid aircraft with a flexible primary airfoil. However, the analysis is easily extendable to include additional appendage flexibility. The analysis establishes the mechanical admittance values for pitching, plunging, and the first mode effects from wing elastic bending and torsion. Nondimensional parameters are established which allow the representation of all subsonic jet transport aircraft with one nondimensional model. The critical parameters for random forcing are found to be aircraft relative mass, reduced natural and forcing frequencies, and Mach number. Turbulence scale lengths are found to be directly related to the critical values of reduced forcing frequency. Results are given for subsonic craft traveling at constant altitude. Specific values of admittance functions are tabulated at Mach numbers of 0.2, 0.5, and 0.7. The relative mass range covers all aircraft currently in operation.

Hillard, S. E.↗
NASA NTRS1974

Small V/STOL aircraft analysis, volume 1

A study has been made of the economic viability of advanced V/STOL aircraft concepts in performing general aviation missions. A survey of general aviation aircraft users, operators, and manufacturers indicated that personnel transport missions formulated around business executive needs, commuter air service, and offshore oil supply are the leading potential areas of application using VTOL aircraft. Advanced VTOL concepts potentially available in the late 1970 time period were evaluated as alternatives to privately owned contemporary aircraft and commercial airline service in satisfying these personnel transport needs. Economic analysis incorporating the traveler's value of time as the principle figure of merit were used to identify the relative merits of alternative VTOL air transportation concepts.

Smith, K. R., Jr.↗
NASA NTRS1975

Monitoring physical and chemical parameters of Delaware Bay waters with an ERTS-1 data collection platform

The author has identified the following significant results. Results of the analysis of data collected during the summer of 1974 demonstrate that the ERTS Data Collection Platform (DCP) is quite responsive to changing water parameters and that this information can be successfully transmitted under all weather conditions. The monitoring of on-site probe outputs reveals a rapid response to changing water temperature, salinity, and turbidity conditions on incoming tides as the tidal salt wedge passes the probe location. The changes in water properties were corroborated by simultaneously sampling the water for subsequent laboratory analysis. Fluctuations observed in the values of salinity, conductivity, temperature and water depth over short time intervals were extremely small. Due to the nature of the probe, 10% to 20% fluctuations were observed in the turbidity values. The use of the average of the values observed during an overpass provided acceptable results. Good quality data was obtained from the satellite on each overpass regardless of weather conditions. Continued use of the DCP will help provide an indication of the accuracy of the probes and transmission system during long term use.

Klemas, V.↗
NASA NTRS1975

Mariner 10 mission analysis - Application of a black art

A major accomplishment of the mission analysis performed for Mariner 10 was the selection of a trajectory which optimized science return from the mission. The analysis utilized simple, unweighted 'science value functions' which allowed the relative values of each candidate trajectory, for each of the seven science experiments, to be calculated. A total relative value for each trajectory was determined by a simple averaging process and sensitivities were revealed by multiplying individual values. This showed a clear scientific preference for launching in early November and was used to support deferral of the launch from early October to November 3, 1973.

Shirley, D. L.↗
NASA NTRS1975

Theoretical and experimental study of flow through turbine cascades with coolant flow injection

An analytical study is presented which deals with the change in the outlet flow conditions from a turbine blade row due to coolant air injection through slots. The analysis applies to small secondary to primary mass flow ratios, taking into consideration the change in boundary layer development resulting from injection. The effects of injection location, injection flow angle and injected air momentum flux are investigated. The results of the present analysis are compared with the values obtained using the mixing theory method and experimental data from cold flow tests in a turbine cascade tunnel.

Tabakoff, W.↗
NASA NTRS1977

Optical constants of ammonium sulfate in the infrared

The infrared spectral reflectance at near normal incidence has been measured for 3.2 M, 2.4 M, and 1.6 M solutions of ammonium sulfate, an aerosol abundant in the stratosphere and also present in the troposphere. Kramers-Kronig analysis was used to determine values of the refractive and absorption indices from the measured spectral reflectance. A synthetic spectrum of crystalline ammonium sulfate was obtained by extrapolation of the absorption index obtained for the solution to the absorber number densities of the NH4 and SO4 ions characteristic of the crystal.

Downing, H. D.↗
NASA NTRS1977

SAS-2 high-energy gamma-ray observations of the Vela pulsar. II

Analysis of additional data from SAS-2 experiment and improvements in the orbit-attitude data and analysis procedures have produced revised values for the flux from the Vela gamma-ray source. The pulsar phase plot shows two peaks, neither of which is in phase with the single radio pulse.

Thompson, D. J.↗
NASA NTRS1978

Infrared band intensities of saturated hydrocarbons

Kramers-Kronig analysis is applied to measured values of spectral reflectance at near-normal incidence to determine the real and the imaginary parts of the complex index of refraction for methane, ethane, propane, n-butane, n-hexane, n-heptane, and n-decane in the liquid state. The results indicate that the strengths of the characteristic bands as measured by the integral of the imaginary part are roughly constant for all the liquid alkanes except for methane. The intensity of the CH valence vibration bands in the spectra of the alkanes except methane is directly proportional to the number of CH groups per unit volume. The relations for the intensity of the bands due to CH2 and CH3 deformations are examined. Characteristic band intensities of the type established for NH4(+) and SO4(2-) groups in solutions and crystals cannot be extended to the more closely coupled CH2 and CH3 groups in alkane molecules.

Pinkley, L. W.↗
NASA NTRS1979

Design of high efficiency HLE solar cells for space and terrestrial applications

A first-order analysis of HLE cells is presented for both beginning-of-life and end-of-life conditions. Based on this analysis and on experimentally observed values for material parameters. Design approaches for both space and terrestrial cells are presented. The approaches result in specification of doping levels, junction depths, and surface conditions. The proposed structures are projected to have both high V sub OC and high J sub SC.

Neugroschel, A.↗
NASA NTRS1979

Study of the post-flare loops on 29 July 1973. II - Physical parameters in the X-ray loops

We use the filter ratio method of analysis to determine spatially resolved values of plasma parameters in the X-ray emitting post-flare loop system which developed on 29 and 30 July 1973. We find that the loops were hotter and had higher plasma pressure at their tops than near their footpoints. The loop tops were at nearly the same temperature at different places 3 hr after the flare maximum and were also at nearly this same temperature 3 and 8 hr later. Variations in brightness transverse to the loops were due to variations in emission measure. We show by consideration of radiative losses alone that energy must have been added to the hottest part of the flare, at the tops of the loops, late in the decay phase of the flare.

Petrasso, R. D.↗
NASA NTRS1980

An investigation of the motion of small particles as related to the formulation of zero gravity experiments

The nature of Brownian motion and historical theoretical investigations of the phenomemon are reviewed. The feasibility of using a laser anemometer to perform small particle experiments in an orbiting space laboratory was investigated using latex particles suspended in water in a plastic container. The optical equipment and the particle Doppler analysis processor are described. The values of the standard deviation obtained for the latex particle motion experiment were significantly large compared to corresponding velocity, therefore, their accuracy was suspect and no attempt was made to draw meaningful conclusions from the results.

Sastry, V. S.↗
NASA NTRS1980

Pioneer Saturn celestial mechanics experiment

The paper investigates a continuous round-trip radio link at S band (2.2 GHz) that was maintained during the Pioneer Saturn encounter between stations of the Deep Space Network and the spacecraft. From an analysis of the Doppler shift in the radio carrier frequency, a number of gravitational effects on the trajectory were determined. Gravitational moments for Saturn were found from a preliminary analysis, as well as mass values for the Saturn satellites Rhea, Iapetus, and Titan. It was determined that the densities of all three satellites are low and consistent with the compositions of ices. Theoretical calculations for the Saturn interior are described which use the latest observational data, including Pioneer Saturn and state-of-the-art physics for the internal composition.

Anderson, J. D.↗
NASA NTRS1980

A nonreflecting outflow boundary condition for subsonic Navier-Stokes calculations

A nonreflecting boundary condition is presented for the numerical solution of the time-dependent compressible Navier-Stokes equations when these equations are used to obtain a steady state. This boundary condition is shown to be effective in reducing reflections at a subsonic outflow boundary. Numerical calculations using a model problem were made to compare this boundary condition with other outflow boundary conditions. The nonreflecting boundary condition contains a parameter whose optimal value is estimated using the analysis of a simplified set of equations.

Rudy, D. H.↗