Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMPLITUDE MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Hypersonic Second-Mode Instability Response to Shaped Roughness

An experimental campaign was conducted on a 7-degree half-angle cone in the NASA Langley Research Center 20-Inch Mach 6 Wind Tunnel to examine the influence of arrays of regularly spaced roughness elements on instability growth and transition. The primary element shape was a pair of elliptical planform ramps that were inclined at equal and opposite angles with respect to the local streamwise direction. The element shapes were designed to induce transient growth disturbances that would lead to sustained azimuthal modulation of the boundary layer flow while limiting the nearfield disturbances to avoid an immediate, i.e., effective tripping of the boundary layer. The bulk of the run matrix consisted of testing different element height sat free stream unit Reynolds numbers ranging from 9.8 to 13.1 million per meter. Other element shapes previously designed for tripping hypersonic boundary layers were also implemented. The model was instrumented with surface mounted Kulite ® and PCB ® pressure transducers and thermocouples. Spectra from the PCBs ® indicated clear suppression of the second-mode instability; however, neither the PCB ® spectra nor the heat transfer data presented strong evidence for delayed turbulent flow. Complementary stability computations likewise demonstrated second-mode reduction, particularly just downstream of the roughness, but also revealed a rise in first mode (streak-instability) amplitudes from the baseline that was likely responsible for the earlier transition observed for taller roughness cases.

Hypersonics↗

Hypersonic Second-Mode Instability Response to Shaped Roughness

An experimental campaign was conducted on a 7-degree half-angle cone in the NASA Langley Research Center 20-Inch Mach 6 Wind Tunnel to examine the influence of arrays of regularly spaced roughness elements on instability growth and transition. The primary element shape was a pair of elliptical planform ramps that were inclined at equal and opposite angles with respect to the local streamwise direction. The element shapes were designed to induce transient growth disturbances that would lead to sustained azimuthal modulation of the boundary layer flow while limiting the nearfield disturbances to avoid an immediate, i.e., effective tripping of the boundary layer. The bulk of the run matrix consisted of testing different element height sat free stream unit Reynolds numbers ranging from 9.8 to 13.1 million per meter. Other element shapes previously designed for tripping hypersonic boundary layers were also implemented. The model was instrumented with surface mounted Kulite ® and PCB ® pressure transducers and thermocouples. Spectra from the PCBs ® indicated clear suppression of the second-mode instability; however, neither the PCB ® spectra nor the heat transfer data presented strong evidence for delayed turbulent flow. Complementary stability computations likewise demonstrated second-mode reduction, particularly just downstream of the roughness, but also revealed a rise in first mode (streak-instability) amplitudes from the baseline that was likely responsible for the earlier transition observed for taller roughness cases.

Hypersonics↗

On a theory of temporal fluctuations in the electrostatic potential structures associated with auroral arcs

A possible mechanism is presented for the generation of large-amplitude temporal fluctuations in the structure of the electron energization region associated with auroral arcs. The mechanism is based on the observation that the auroral arc system resembles a laboratory circuit consisting of the series connection of battery, resistance and a forward biased diode containing collisionless plasma in which large-amplitude relaxation oscillations are sometimes observed to be superimposed on the steady-state current. It is shown that in both the laboratory and auroral systems, in which a localized auroral arc dynamo, the ionosphere and the electron energization region are involved, the oscillations are controlled by the times for ions and electrons to traverse the acceleration region, which also characterize the low- and high-frequency structure of the fluctuating waveform. It is demonstrated that a plausible one-dimensional double-layer model of the auroral arc acceleration region exhibits the dynamic negative resistance necessary for the generation of oscillations by the present mechanism. Finally, consideration is given to two kinds of auroral phenomena which might be associated with the mechanism: the 10-Hz quasi-periodic flickering aurora and 10-Hz modulations in the intensity of electrostatic hydrogen cyclotron waves.

Silevitch, M. B.↗

Dynamics of the magnetic shearing instability and magnetohydrodynamic turbulence in accretion disks. 1: Vertical magnetic field

Recently, the magnetic shearing instability (MSI) has been proposed as a dynamical mechanism for angular momentum transport in accretion disks (Balbus & Hawley 1991; Hawley & Balbus 1991). In this paper, the nonlinear dynamics of MSI modes in the presence of a vertical magnetic field B(sub 0) is discussed. In particular, the saturation levels of the fluctuating fields, the angular momentum flux, and the energy dissipation mechanism, are examined in detail. It is shown that MSI induces strong magnetohydrodynamic (MHD) turbulence in a range of wavenumbers 1/H is less than K is less than or equal to Omega/V(sub A)(sub 0)), where H is the thickness, Omega is the rotation frequency of the disk, and V(sub A)(sub 0) is the Alfven velocity. Despite the fact that the linear growth rate of MSI is maximal at small-scale (i.e., k is approximately Omega/V(sub A(sub 0)), angular momentum transport due to MSI turbulence is dominated by the magnetic Reynolds stress driven by large-scale modes (k is approximately 1/H). It is shown that the amplitude of low k(sub r) MSI eddies is limited primarily by subscale shear flow instability. Thus, dominant MSI cells are quasi-isotropic. In a stationary state, the effective Shakura-Sunyaev 'alpha' value is predicted to be of order V(sub A)(sub 0)0/C(sub s). In addition, the veritcal magnetic-field-induced MSI cells convert vertical magnetic field B(sub 0) into azimuthal magnetic field B(sub theta) in the disk. The generation of azimuthal magnetic field in turn introduces new physical processes, such as dynamo activity and azimuthal MSI turbulence. We conclude that it is not possible to decouple vertical MSI saturation from azimuthal MSI evolution. Low-frequency MSI cells are shown to co-exist with high-frequency radial buoyancy or internal waves. We show that modulational interaction between waves on these two frequency ranges is usually weak in the case when mean magnetic field is vertical. Thus, MSI and internal wave dynamics must be treated on an equal footing.

Zhang, W.↗

Emergency Multiengine Aircraft System for Lateral Control Using Differential Thrust Control of Wing Engines

Development of an emergency flight control system is disclosed for lateral control using only differential engine thrust modulation of multiengine aircraft is currently underway. The multiengine has at least two engines laterally displaced to the left and right from the axis of the aircraft. In response to a heading angle command psi(sub c) is to be tracked. By continually sensing the heading angle psi of the aircraft and computing a heading error signal psi(sub e) as a function of the difference between the heading angle command psi(sub c) and the sensed heading angle psi, a track control signal is developed with compensation as a function of sensed bank angle phi. Bank angle rate phi, or roll rate p, yaw rate tau, and true velocity produce an aircraft thrust control signal ATC(sub psi(L,R)). The thrust control signal is differentially applied to the left and right engines, with equal amplitude and opposite sign, such that a negative sign is applied to the control signal on the side of the aircraft. A turn is required to reduce the error signal until the heading feedback reduces the error to zero.

Burken, John J.↗

ERS-1 and Seasat scatterometer measurements of ocean winds: Model functions and the directional distribution of short waves

Calculation of accurate vector winds from scatterometers requires knowledge of the relationship between backscatter cross-section and the geophysical variable of interest. As the detailed dynamics of wind generation of centimetric waves and radar-sea surface scattering at moderate incidence angles are not well known, empirical scatterometer model functions relating backscatter to winds must be developed. Less well appreciated is the fact that, given an accurate model function and some knowledge of the dominant scattering mechanisms, significant information on the amplitudes and directional distributions of centimetric roughness elements on the sea surface can be inferred. accurate scatterometer model functions can thus be used to investigate wind generation of short waves under realistic conditions. The present investigation involves developing an empirical model function for the C-band (5.3 GHz) ERS-1 scatterometer and comparing Ku-band model functions with the C-band model to infer information on the two-dimensional spectrum of centimetric roughness elements in the ocean. The C-band model function development is based on collocations of global backscatter measurements with operational surface analyses produced by meteorological agencies. Strengths and limitations of the method are discussed, and the resulting model function is validated in part through comparison with the actual distributions of backscatter cross-section triplets. Details of the directional modulation as well as the wind speed sensitivity at C-band are investigated. Analysis of persistent outliers in the data is used to infer the magnitudes of non-wind effects (such as atmospheric stratification, swell, etc.). The ERS-1 C-band instrument and the Seasat Ku-band (14.6 GHz) scatterometer both imaged waves of approximately 3.4 cm wavelength assuming that Bragg scattering is the dominant mechanism. Comparisons of the C-band and Ku-band model functions are used both to test the validity of the postulated Bragg mechanism and to investigate the directional distribution of the imaged waves under a variety of conditions where Bragg scatter is dominant.

Freilich, Michael H.↗

Full-Circle Resolver-to-Linear-Analog Converter

A circuit generates sinusoidal excitation signals for a shaft-angle resolver and, like the arctangent circuit described in the preceding article, generates an analog voltage proportional to the shaft angle. The disadvantages of the circuit described in the preceding article arise from the fact that it must be made from precise analog subcircuits, including a functional block capable of implementing some trigonometric identities; this circuitry tends to be expensive, sensitive to noise, and susceptible to errors caused by temperature-induced drifts and imprecise matching of gains and phases. These disadvantages are overcome by the design of the present circuit. The present circuit (see figure) includes an excitation circuit, which generates signals Ksin(Omega(t)) and Kcos(Omega(t)) [where K is an amplitude, Omega denotes 2(pi)x a carrier frequency (the design value of which is 10 kHz), and t denotes time]. These signals are applied to the excitation terminals of a shaft-angle resolver, causing the resolver to put out signals C sin(Omega(t)-Theta) and C cos(Omega(t)-Theta). The cosine excitation signal and the cosine resolver output signal are processed through inverting comparator circuits, which are configured to function as inverting squarers, to obtain logic-level or square-wave signals .-LL[cos(Omega(t)] and -LL[cos(Omega(t)-Theta)], respectively. These signals are fed as inputs to a block containing digital logic circuits that effectively measure the phase difference (which equals Theta between the two logic-level signals). The output of this block is a pulse-width-modulated signal, PWM(Theta), the time-averaged value of which ranges from 0 to 5 VDC as Theta ranges from .180 to +180deg. PWM(Theta) is fed to a block of amplifying and level-shifting circuitry, which converts the input PWM waveform to an output waveform that switches between precise reference voltage levels of +10 and -10 V. This waveform is processed by a two-pole, low-pass filter, which removes the carrier-frequency component. The final output signal is a DC potential, proportional to Theta that ranges continuously from -10 V at Theta = -180deg to +10 V at Theta = +180deg..

Alhorn, Dean C.↗

Neurovestibular modulation of circadian and homeostatic regulation: vestibulohypothalamic connection?

Chronic exposure to increased force environments (+G) has pronounced effects on the circadian and homeostatic regulation of body temperature (T(b)), ambulatory activity (Act), heart rate, feeding, and adiposity. By using the Brn 3.1 knockout mouse, which lacks vestibular hair cells, we recently described a major role of the vestibular system in mediating some of these adaptive responses. The present study used the C57BL6JEi-het mouse strain (het), which lacks macular otoconia, to elucidate the contribution of specific vestibular receptors. In this study, eight het and eight WT mice were exposed to 2G for 8 weeks by means of chronic centrifugation. In addition, eight het and eight WT mice were maintained as 1G controls in similar conditions. Upon 2G exposure, the WT exhibited a decrease in T(b) and an attenuated T(b) circadian rhythm. Act means and rhythms also were attenuated. Body mass and food intake were significantly lower than the 1G controls. After 8 weeks, percent body fat was significantly lower in the WT mice (P < 0.0001). In contrast, the het mice did not exhibit a decrease in mean T(b) and only a slight decrease in T(b) circadian amplitude. het Act levels were attenuated similarly to the WT mice. Body mass and food intake were only slightly attenuated in the het mice, and percent body fat, after 8 weeks, was not different in the 2G het group. These results link the vestibular macular receptors with specific alterations in homeostatic and circadian regulation.

NASA Discipline Regulatory Physiology↗

Effects of lesions of the caudal cerebellar vermis on cardiovascular regulation in awake cats

The vestibular system is known to participate in cardiovascular regulation during movement and postural alterations. The present study considered whether lesions of two regions of the posterior cerebellar vermis (the nodulus and uvula) that provide inputs to vestibular nucleus regions that affect control of blood pressure would alter cardiovascular responses during changes in posture. Blood pressure and heart rate were monitored in awake cats during nose-up tilts up to 60 degrees in amplitude before and following aspiration lesions of the nodulus or uvula; in most animals, cardiovascular responses were also recorded following the subsequent removal of vestibular inputs. Lesions of the nodulus or uvula did not affect baseline blood pressure or heart rate, although cardiovascular responses during nose-up tilts were altered. Increases in heart rate that typically occurred during 60 degrees nose-up tilt were attenuated in all three animals with lesions affecting both dorsal and ventral portions of the uvula; in contrast, the heart rate responses were augmented in the two animals with lesions mainly confined to the nodulus. Furthermore, following subsequent removal of vestibular inputs, uvulectomized animals, but not those with nodulus lesions, experienced more severe orthostatic hypotension than has previously been reported in cerebellum-intact animals with bilateral labyrinthectomies. These data suggest that the cerebellar nodulus and uvula modulate vestibulo-cardiovascular responses, although the two regions play different roles in cardiovascular regulation.

NASA Discipline Neuroscience↗

Modeling the QBO and SAO Driven by Gravity Waves

Hines' Doppler spread parameterization (DSP) for small scale gravity waves (GW) is applied in a global scale numerical spectral model (NSM) to describe the semi-annual and quasi-biennial oscillations (SAO and QBO) as well as the long term interannual variations that are driven by wave mean flow interactions. This model has been successful in simulating the salient features observed near the equator at altitudes above 20 km, including the QBO extension into the upper mesosphere inferred from UARS measurements. The model has now been extended to describe also the mean zonal and meridional circulations of the upper troposphere and lower stratosphere that affect the equatorial QBO and its global scale extension. This is accomplished in part through tuning of the GW parameterization, and preliminary results lead to the following conclusions: (1) To reproduce the upwelling at equatorial latitudes associated with the Brewer/Dobson circulation that in part is modulated in the model by the vertical component of the Coriolis force, the eddy diffusivity in the lower stratosphere had to be enhanced and the related GW spectrum modified to bring it in closer agreement with the form recommended for the DSP. (2) To compensate for the required increase in the diffusivity, the observed QBO requires a larger GW source that is closer to the middle of the range recommended for the DSP. (3) Through global scale momentum redistribution, the above developments are conducive to extending the QBO and SAO oscillations to higher latitudes. Multi-year interannual oscillations are generated through wave filtering by the solar driven annual oscillation in the zonal circulation. (4) In a 3D version of the model, wave momentum is absorbed and dissipated by tides and planetary waves. Thus, a somewhat larger GW source is required to generate realistic amplitudes for the QBO and SAO.

Mayr, H. G.↗

NASA’s Orion Crew Module Seakeeping Simulation and Test Comparisons in Ocean Wave Environments

The NASA Orion Crew Module (CM) post-landing seakeeping and uprighting capabilities are being evaluated across a variety of ocean wave conditions. This paper provides an overview of quarter-scale and full-scale test data and how it compares with the CM seakeeping dynamic simulation results evaluated using Wave Energy Convertor Simulator (WEC-Sim).This includes a discussion of the status of the dynamic modeling effort, correlation of model inputs with the wave field from the test, and a comparison of the results against the physical test data with emphasis on the full-scale results. Analysis in the frequency domain showed similar response characteristics between the model and the test and shows energy peaks corresponding to both the natural response and the forced response due to the wave environment. Time domain comparisons showed that the linear WEC-Sim model under predicted the amplitude of the pitch and roll motion of the test article, with improved matching for smaller, longer crested waves. An attempt was made to correlate the pitch/roll response to incident wave slope to account for a possible delay in the BTA’s response. The results did not show a strong relationship in the response characteristics to incident wave slope, but better correlation was seen by comparing responses in the frequency domain. Evaluation of the simulation’s ability to match test results aided in understanding the current fidelity of the CM model in WEC-Sim and identifying areas for model improvement

Abigail Lockard↗

Recent Changes in Tropospheric Ozone in the Tropics

This paper presents a detailed characterization of tropical tropospheric column ozone variability on time scales varying from a few days to a solar cycle. The study is based on more than 20 years (1979 to the present) of tropospheric column ozone time series derived from the convective cloud differential (CCD) method using total ozone mapping spectrometer (TOMS) data. Results indicate three distinct regions in the tropics with distinctly three different zonal characteristics related to seasonal, interannual and solar variabilities. These three regions are the eastern Pacific, Atlantic, and western Pacific. Tropospheric column ozone in the Atlantic region peaks at about the same time (September-October) from 20 N to 20 S. The amplitude of the annual cycle, however, varies from about 3 to 6 Dobson unit (DU) from north to south of the equator. In comparison, the annual cycle in both the eastern and western Pacific is generally week and the phase varies from peak values in March and April in the northern hemisphere to September and October in the southern hemisphere. The interannual pattern in the three regions are also very different. The Atlantic region indicates a quasi biennial oscillation in the tropospheric column ozone which is out of phase with the stratospheric ozone. This is consistent with the photochemical control of this region caused by high pollution and high concentration of ozone producing precursors. The observed pattern, however, does not seem to be related to the interannual variability in ozone precursors related to biomass burning. Instead, it appears to be a manifestation of the UV modulation of upper tropospheric chemistry on a QBO time scale caused by stratospheric ozone. During El Nino events, there is anomalously low ozone in the eastern Pacific and high values in the western Pacific indicating the effects of convectively driven transport. The observed increase of 10-20 DU in tropospheric column ozone in the Indonesian region in the western Pacific during the recent 1997-1998 El Nino was associated with large-scale forest fires which may have contributed 5-10 DU of the total increase.

Chandra, S.↗

Principal modes of atmospheric circulation anomalies associated with global angular momentum fluctuations

This paper provides a description of the variability of global atmospheric angular momentum (GAM) and its relationship with principal modes of three-dimensional atmospheric circulation anomalies. The data used are 5-day mean global wind fields from the European Centre for Medium-Range Weather Forecasts initialized dataset for 1980-1989. Significant seasonal variation of GAM is observed with maxima in April and November and a minimum during late July. The amplitude of the annual cycle is largest in the upper troposphere and decreases toward the surface. Although the lower tropospheric contribution to the total angular momentum is relatively small, its annual cycle is out of phase with those of the upper atmosphere and GAM. Also identified is a distinct semiannual component, with double peaks appearing in April and November. This signal is most noticeable in the upper troposphere above the 300-mb level. The principal modes of zonal-mean angular momentum and meridional circulation anomalies and their coupled modes are obtained by using empirical orthogonal function analysis and singular value decomposition. It is shown that the leading modes of the angular momentum and meridional circulation are coupled with each other and are responsible for much of the variability in GAM. The coupled modes represent fluctuations of upper-level subtropical zonal flow, which are linked to the modulation of Hadley circulation intensity in both hemispheres. It is found that GAM is highly correlated with the first eigenvector of upper-level streamfunction anomalies, which consists of a superrotational flow in the tropics and subtropics, except over the central Pacific where a 'blocked' flow with two subtropical anticyclonic circulation cells straddling the equator is found. Much of the blocked flow is due to the establishment of dipole anomalies in the velocity potential with centers over the central Pacific and the Maritime Continent on the interannual time scale. On the intraseasonal time scale, GAM fluctuation is dominated by superrotational flow in the tropics, with the blocked flow present to a much lesser extent. The associated velocity potential anomaly has a weak dipole structure with centers over the Indian Ocean and the eastern Pacific. The implications of the above results on the total angular momentum balance of the earth-atmosphere system are also discussed.

Kang, In-Sik↗

Solid Rocket Motor Combustion Instability Modeling in COMSOL Multiphysics

Combustion instability modeling of Solid Rocket Motors (SRM) remains a topic of active research. Many rockets display violent fluctuations in pressure, velocity, and temperature originating from the complex interactions between the combustion process, acoustics, and steady-state gas dynamics. Recent advances in defining the energy transport of disturbances within steady flow-fields have been applied by combustion stability modelers to improve the analysis framework. Employing this more accurate global energy balance requires a higher fidelity model of the SRM flow-field and acoustic mode shapes. The current industry standard analysis tool utilizes a one dimensional analysis of the time dependent fluid dynamics along with a quasi-three dimensional propellant grain regression model to determine the SRM ballistics. The code then couples with another application that calculates the eigenvalues of the one dimensional homogenous wave equation. The mean flow parameters and acoustic normal modes are coupled to evaluate the stability theory developed and popularized by Culick. The assumption of a linear, non-dissipative wave in a quiescent fluid remains valid while acoustic amplitudes are small and local gas velocities stay below Mach 0.2. The current study employs the COMSOL Multiphysics finite element framework to model the steady flow-field parameters and acoustic normal modes of a generic SRM. This work builds upon previous efforts to verify the use of the acoustic velocity potential equation (AVPE) laid out by Campos. The acoustic velocity potential (psi) describing the acoustic wave motion in the presence of an inhomogeneous steady high-speed flow is defined by, del squared psi - (lambda/c) squared psi - M x [M x del((del)(psi))] - 2((lambda)(M)/c + M x del(M) x (del)(psi) - 2(lambda)(psi)[M x del(1/c)] = 0. with M as the Mach vector, c as the speed of sound, and λ as the complex eigenvalue. The study requires one way coupling of the CFD High Mach Number Flow (HMNF) and mathematics module. The HMNF module evaluates the gas flow inside of a SRM using St. Robert's law to model the solid propellant burn rate, slip boundary conditions, and the supersonic outflow condition. Results from the HMNF model are verified by comparing the pertinent ballistics parameters with the industry standard code outputs (i.e. pressure drop, axial velocity, exit velocity). These results are then used by the coefficient form of the mathematics module to determine the complex eigenvalues of the AVPE. The mathematics model is truncated at the nozzle sonic line, where a zero flux boundary condition is self-satisfying. The remaining boundaries are modeled with a zero flux boundary condition, assuming zero acoustic absorption on all surfaces. The one way coupled analysis is perform four times utilizing geometries determined through traditional SRM modeling procedures. The results of the steady-state CFD and AVPE analyses are used to calculate the linear acoustic growth rate as is defined by Flandro and Jacob. In order to verify the process implemented within COMSOL we first employ the Culick theory and compare the results with the industry standard. After the process is verified, the Flandro/Jacob energy balance theory is employed and results displayed.

Fischbach, S. R.↗

The Impact of Stellar Variability on the Detection of Transiting Earth-like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute approx.10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from less than 1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

transit surveys↗

The Impact of Stellar Variability on the Detection of Transiting Earth-Like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute ~10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from <1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

exoplanets↗

Radiation-Hard SpaceWire/Gigabit Ethernet-Compatible Transponder

A radiation-hard transponder was developed utilizing submicron/nanotechnology from IBM. The device consumes low power and has a low fabrication cost. This device utilizes a Plug-and-Play concept, and can be integrated into intra-satellite networks, supporting SpaceWire and Gigabit Ethernet I/O. A space-qualified, 100-pin package also was developed, allowing space-qualified (class K) transponders to be delivered within a six-month time frame. The novel, optical, radiation-tolerant transponder was implemented as a standalone board, containing the transponder ASIC (application specific integrated circuit) and optical module, with an FPGA (field-programmable gate array) friendly parallel interface. It features improved radiation tolerance; high-data-rate, low-power consumption; and advanced functionality. The transponder utilizes a patented current mode logic library of radiation-hardened-by-architecture cells. The transponder was developed, fabricated, and radhard tested up to 1 MRad. It was fabricated using 90-nm CMOS (complementary metal oxide semiconductor) 9 SF process from IBM, and incorporates full BIT circuitry, allowing a loop back test. The low-speed parallel LVCMOS (lowvoltage complementary metal oxide semiconductor) bus is compatible with Actel FPGA. The output LVDS (low-voltage differential signaling) interface operates up to 1.5 Gb/s. Built-in CDR (clock-data recovery) circuitry provides robust synchronization and incorporates two alarm signals such as synch loss and signal loss. The ultra-linear peak detector scheme allows on-line control of the amplitude of the input signal. Power consumption is less than 300 mW. The developed transponder with a 1.25 Gb/s serial data rate incorporates a 10-to-1 serializer with an internal clock multiplication unit and a 10-1 deserializer with internal clock and data recovery block, which can operate with 8B10B encoded signals. Three loop-back test modes are provided to facilitate the built-in-test functionality. The design is based on a proprietary library of differential current switching logic cells implemented in the standard 90-nm CMOS 9SF technology from IBM. The proprietary low-power LVDS physical interface is fully compatible with the SpaceWire standard, and can be directly connected to the SFP MSA (small form factor pluggable Multiple Source Agreement) optical transponder. The low-speed parallel interfaces are fully compatible with the standard 1.8 V CMOS input/output devices. The utilized proprietary annular CMOS layout structures provide TID tolerance above 1.2 MRad. The complete chip consumes less than 150 mW of power from a single 1.8-V positive supply source.

Katzman, Vladimir↗

Electromagnetic Radiation in the Plasma Environment Around the Shuttle

As part of the SAMPIE (The Solar Array Module Plasma Interaction Experiment) program, the Langmuir probe (LP) was employed to measure plasma characteristics during the flight STS-62. The whole set of data could be divided into two parts: (1) low frequency sweeps to determine voltage-current characteristics and to find electron temperature and number density; (2) high frequency turbulence (HFT dwells) data caused by electromagnetic noise around the shuttle. The broadband noise was observed at frequencies 250-20,000 Hz. Measurements were performed in ram conditions; thus, it seems reasonable to believe that the influence of spacecraft operations on plasma parameters was minimized. The average spectrum of fluctuations is in agreement with theoretical predictions. According to purposes of SAMPIE, the samples of solar cells were placed in the cargo bay of the shuttle, and high negative bias voltages were applied to them to initiate arcing between these cells and surrounding plasma. The arcing onset was registered by special counters, and data were obtained that included the amplitudes of current, duration of each arc, and the number of arcs per one experiment. The LP data were analyzed for two different situations: with arcing and without arcing. Electrostatic noise spectra for both situations and theoretical explanation of the observed features are presented in this report.

Vayner, Boris V.↗