Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

A Cryogenic Waveguide Mount for Microstrip Circuit and Material Characterization

A waveguide split-block fixture used in the characterization of thin-film superconducting planar circuitry at millimeter wavelengths is described in detail. The test fixture is realized from a pair of mode converters, which transition from rectangular-waveguide to on-chip microstrip-line signal propagation via a stepped ridge-guide impedance transformer. The observed performance of the W-band package at 4.2K has a maximum in-band transmission ripple of 2dB between 1.53 and 1.89 times the waveguide cutoff frequency. This metrology approach enables the characterization of superconducting microstrip test structures as a function temperature and frequency. The limitations of the method are discussed and representative data for superconducting Nb and NbTiN thin film microstrip resonators on single-crystal Si dielectric substrates are presented.

U-yen, Kongpop↗

A Cryogenic Waveguide Mount for Microstrip Circuit and Material Characterization

A waveguide split-block fixture used in the characterization of thin-film superconducting planar circuitry at millimeter wavelengths is described in detail. The test fixture is realized from a pair of mode converters, which transition from rectangular-waveguide to on-chip microstrip-line signal propagation via a stepped ridge-guide impedance transformer. The observed performance of the W-band package at 4.2K has a maximum in-band transmission ripple of 2dB between 1.53 and 1.89 times the waveguide cutoff frequency. This metrology approach enables the characterization of superconducting microstrip test structures as a function temperature and frequency. The limitations of the method are discussed and representative data for superconducting Nb and NbTiN thin film microstrip resonators on single-crystal Si dielectric substrates are presented.

U-yen, Kongpop↗

Article comprising a semiconducting material

Single crystals of the new semiconducting oxychalcogenide phase were synthesized using a novel crystal growth method. The crystals had low defects and homogeneous composition as characterized by single crystal X-ray diffraction and scanning electron microscopy, respectively. Heat capacity and resistivity measurements were in agreement with the calculated band structure calculations indicating semiconductivity, with a band gap of about 3 eV.

Whalen, Jeffrey↗

Metallic components with enhanced mechanical strength through surface mechanical grinding

A method of strengthening a component made of a metallic material. The method includes subjecting the component to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure on the surface of the component, resulting in increased tensile strength of the component. A method of strengthening a component made of a TWIP steel. The method includes subjecting the component made of TWIP steel to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure containing a surface nanolaminate layer, a shear band layer, and an inner deformation twinned layer, resulting in increased tensile strength of the component. A component made of a TWIP steel containing a gradient structure with a surface nanolaminate layer, a shear band layer, and a deformation twinned layer.

Ding, Jie↗

Metallic components with enhanced mechanical strength through surface mechanical grinding

A method of strengthening a component made of a metallic material. The method includes subjecting the component to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure on the surface of the component, resulting in increased tensile strength of the component. A method of strengthening a component made of a TWIP steel. The method includes subjecting the component made of TWIP steel to a mechanical grinding process incorporating a relative motion between a tool and the component forming a gradient structure containing a surface nanolaminate layer, a shear band layer, and an inner deformation twinned layer, resulting in increased tensile strength of the component. A component made of a TWIP steel containing a gradient structure with a surface nanolaminate layer, a shear band layer, and a deformation twinned layer.

Ding, Jie↗

Ag-doped HfO{sub 2} thin films via sol–gel dip coating method

In this study, undoped and Ag-doped HfO{sub 2} thin films were deposited on glass substrates by means of sol–gel dip coating method. These films were then thermally annealed at 500 °C for 1 h. The structural and optical properties of undoped and Ag-doped HfO{sub 2} thin films were characterized by X-ray diffraction, UV–Vis spectrometry and scanning electron microscope. The results of this analysis were compared and interpreted with the results obtained in literature by various methods of coating with HfO{sub 2}. The X-ray diffraction peaks of the films paired with monoclinic HfO{sub 2} crystalline peaks. The refractive indices of the films decreased with doping Ag, at 500 nm wavelengths. The optical band gap values of Ag-doped HfO{sub 2} thin films increased with doping Ag. The porous structures were observed on the surface films, especially with 5% Ag doping.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the silicon concentration effect on Si-doped anatase TiO{sub 2} by first-principles calculation

A first-principles calculation based on the density functional theory (DFT) was used to investigate the energetic and electronic properties of Si-doped anatase TiO{sub 2} with various silicon concentrations. The theoretical calculations showed that with Si-doping the valence band and conduction band of TiO{sub 2} became hybrid ones with large dispersion, which could benefit the mobility of the photo-generated carriers. This result is in agreement with the experimental reports. At lower doping levels, the band gap of Si-doped anatase TiO{sub 2} decreases about 0.2 eV. With the increase of silicon concentration, the band gap increases gradually and larger formation energies are required during the synthesis of Si-doped TiO{sub 2}. - Graphical abstract: The total density of states (TDOS) of Ti{sub 1-x}Si{sub x}O{sub 2} with (a) x=0, (b) x=0.03125, (c) x=0.0625, (d) x=0.09375 and (e) x=0.125. Highlights: > The effect of Si content on the electronic structure in Si-doped anatase TiO{sub 2}. > Large dispersion of DOS in VB and CB benefits the mobility of the carriers. > Low Si-doping level reduces the band gap of Si-doped anatase TiO{sub 2} with 0.2 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced photocatalytic degradation of phenol over Ag3PO4-BiOCl1−xBrx composites

Highlights: • Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites were successfully synthesized and characterized. • The band energy of composites can be tunable by solid-solution strategy. • Appropriate band-gap structure facilitates charge separation property and light absorption. - Abstract: In this paper, a series of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites with adjustable band gap has been fabricated by using a facile two-step synthetic method. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} was evaluated by photocatalytic decomposition of phenol aqueous solution under simulated solar light irradiation. The result shows that Ag{sub 3}PO{sub 4}-BiOCl{sub 0.75}Br{sub 0.25} (1:5) composite possesses the best photocatalytic activity among all the as-prepared samples. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl can be enhanced mainly owing to the strong light absorption ability by loading Ag{sub 3}PO{sub 4} on the surface of BiOCl, while the photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} (x = 0.25, 0.5, 0.75 and 1) composites could be enhanced by restraining the recombination of photo-generated electron-hole pairs. The enhanced solar-light photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites could be ascribed to the adjustable energy band structure, which facilitates the separation of photoinduced carriers. In addition, superoxide radicals (O{sub 2}{sup −}), holes (h{sup +}) and OH are considered to dominate the photocatalytic degration process. Moreover, a possible mechanism of deep understanding on the base of experimental results was proposed.

36 MATERIALS SCIENCE↗

Data-Driven Mapping of the Cesium Cadmium Bromide Phase Space Utilizing a Soft-Chemistry Approach

Soft-chemistry techniques provide a versatile approach to synthesizing inorganic materials under mild conditions, enabling access to compositions and structures that are challenging to achieve through traditional thermodynamically driven solid-state methods. However, these solution-based routes often result in phase competition, requiring precise control over reaction conditions to achieve selective product formation. While one-variable-at-a-time (OVAT) approaches have traditionally been used for phase selection, data-driven strategies are emerging as more efficient methods for navigating complex synthetic spaces. Ternary metal halides, such as cesium cadmium bromides (Cs–Cd–Br), are of growing interest due to their potential in wide and ultrawide band gap applications. Unlike the well-studied cesium lead halide phases, the compositional diversity and solution-based synthesis of ternary Cs–Cd–Br phases remain largely unexplored. This study systematically investigates the synthetic phase space of the Cs–Cd–Br system by constructing a data-driven phase map. Using a common set of precursors and a standardized experimental procedure, we successfully synthesize all four known Cs–Cd–Br phases—CsCdBr 3 , Cs 2 CdBr 4 , Cs 3 CdBr 5 , and Cs 7 Cd 3 Br 13 —each exhibiting distinct structures, morphologies, and optical properties. Our findings highlight the potential of soft-chemistry methods for expanding the library of ternary metal halides and provide key insights into the thermodynamic and kinetic factors governing phase formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thickness-dependent dispersion parameters, energy gap and nonlinear refractive index of ZnSe thin films

Highlights: • Combined experimental and theoretical researches on ZnSe Thin Films. • The film thickness and refractive index were determined using envelope method. • The absorption coefficient and the energy gap were calculated. • Dispersion parameters were determined using Wemple-DiDomenico relation. • The third order susceptibility and nonlinear refractive index were calculated. - Abstract: Zinc selenide (ZnSe) thin films with different thicknesses were evaporated onto glass substrates using the thermal evaporation technique. X-ray diffraction analysis confirmed that both the film and powder have cubic zinc-blende structure. The fundamental optical parameters like absorption coefficient, extinction coefficient and band gap were evaluated in transparent region of transmittance and reflectance spectrum. The optical transition of the films was found to be allowed, where the energy gap increased from 2.576 to 2.702 eV with increasing film thickness. Also, the refractive index value increase with increasing film thickness. The refractive indices evaluated through envelope method were extrapolated by Cauchy dispersion relationship over the whole spectra range. Additionally, the dispersion of refractive index was determined in terms of Wemple-DiDomenico single oscillator model. Third order susceptibility and nonlinear refractive index were determined for different thickness of ZnSe thin films.

36 MATERIALS SCIENCE↗

High-Resolution Inspection of the Space Shuttle External Tank Spray-on-Foam Insulation (SOFI) using Focused Millimeter Waves at D-Band (150 GHz)

Space Shuttle Columbia's catastrophic failure has been attributed to a piece of spray-on-foam insulation (SOFI) that was dislodged from the external tank and struck the leading edge of the left wing. A piece of SOFI was also dislodged in the recent Space Shuttle Discovery's flight. Clearly, there is a great and urgent need to inspect the external tank SOFI and other similar insulating structures (including the acreage heat tile) in a reliable and robust fashion. In the past two years, millimeter wave nondestructive testing methods, using both real and synthetic focusing techniques, have shown great potential for this purpose. Recently obtained real-focused images from several different and complex SOFI panels have demonstrated the utility of these methods as being viable, robust, repeatable, simple, portable and effective. D-band frequency range which covers a frequency spectrum of 110- 170 GHz is well-suited for this purpose given the nature of the foam which causes significant scattering at much higher frequencies. This paper presents the results of using continuous-wave (CW) reflectometry conducted on several typical and complex SOFI panes at 150 GHz.

Kharkovsky, S.↗

First-Principles Investigations of the Temperature Dependence of Electronic Structure and Optical Properties of Rutile TiO 2

To gain additional insight into high-temperature functional material properties for applications in optical gas sensing, the temperature effects on the band gap and optical properties of rutile TiO 2 are investigated using ab initio methods. By analyzing the contributions from electron–phonon interaction and lattice thermal expansion, we show that the electron–phonon interaction is the dominant factor for temperature band-gap renormalization. As the temperature increases, the band gap increases until 300 K and then narrows above 300 K. This behavior results from the acoustic phonons, which widen the band gap, dominate below 300 K, while the optical phonons, which narrow the band gap, dominate above 300 K. Our study suggests that the band gap is narrowed by about 138 meV at 1000 K. We also investigated the temperature effects on the dielectric constants, the refractive index, as well as the extinction coefficient. Both the rate of decrease of the refractive index at 650 and 800 nm as well as the experimentally derived band gap agree with experimentally measured data as the temperature increases. Furthermore, our results and computational methods are of interest for developing high-temperature functional materials with applications toward gas sensing.

36 MATERIALS SCIENCE↗

Ferromagnetism and antiferromagnetism coexistence in SrRu{sub 1-x}Mn{sub x}O{sub 3}: Density functional calculation

We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U. The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism in the low Mn-doped polycrystalline samples. This is in contrast to the appearance of quantum critical point and FM and AFM transitions in the single crystal measurement. Our results show that the discrepancy between different experimental phase diagrams is related to the conditions of sample preparation and also the difference between the degree of magnetic interactions between the Mn and Ru moments. The DOS and the calculated Mn magnetic moment is similar to the magnetic moment of a purely ionic compound with d{sup 3} configuration. The AFM state has band gap of 1.2 eV at the Fermi energy predicting an insulating behavior. -- Graphical abstract: The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism with the formation of a spin glass phase. We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U in the range of both low and high Mn-doping for parallel and antiparallel alignments of Ru and Mn moments. In the low Mn-doped polycrystalline samples with tetragonal structure, the AFM hybridization between Mn and the Ru host lattice strongly favors alignment of the Ru moments, and provides an explanation for retaining of high Curie temperature of SrRuO{sub 3} with Mn substitution. Display Omitted Research highlights: {yields} For the low Mn-doping the AFM coupling between Mn and Ru becomes stable. {yields} Results are consistent with the QCP between FM and AFM transitions in single crystals. {yields} In high Mn-doping, electron correlation is important in predicting the insulating behavior.

36 MATERIALS SCIENCE↗

Low Thermal Gradient Czochralski growth of large CdWO{sub 4} crystals and electronic properties of (010) cleaved surface

The crystal growth of large high-quality inclusion-free CdWO4 crystals, 110 mm in diameter and mass up to 20 kg, has been carried out by the Low Thermal Gradient Czochralski (LTG Cz) technique. The high-purity CdWO{sub 4}(010) surface has been prepared by cleavage and high structural quality of the surface has been verified by RHEED, revealing a system of Kikuchi lines. The chemical state and electronic structure of the surface have been studied using X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES). The total and partial densities of states of the CdWO{sub 4} tungstate were calculated employing the first-principles full potential linearized augmented plane wave (FP-LAPW) method. The results indicate that the principal contributors to the valence band of CdWO{sub 4} are the Cd 4d, W 5d and O 2p states which contribute mainly at the bottom, in the central portion and at the top of the valence band, respectively, with also significant contributions of the mentioned states throughout the whole CdWO{sub 4} valence-band region. With respect to the occupation of the O 2p states, the results of the FP-LAPW calculations are confirmed by comparison on a common energy scale of the XPS valence-band spectrum and the XES band representing the energy distribution of the O 2p states in this compound. Additionally, the FP-LAPW data allow us to conclude that the CdWO{sub 4} tungstate is a non-direct semiconductor. - Highlights: • Large high-quality CdWO{sub 4} crystals, up to 115 mm in diameter and mass up to 20 kg, have been grown. • The high-purity cleaved CdWO{sub 4}(010) surface has been studied by the XPS and XES methods. • The principal contributors to the CdWO{sub 4} valence band are the Cd 4d, W 5d and O 2p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpretation of the photoelectron, ultraviolet, and vacuum ultraviolet photoabsorption spectra of bromobenzene by ab initio configuration interaction and DFT computations

New photoelectron, ultraviolet (UV), and vacuum UV (VUV) spectra have been obtained for bromobenzene by synchrotron study with higher sensitivity and resolution than previous work. This, together with use of ab initio calculations with both configuration interaction and time dependent density functional theoretical methods, has led to major advances in interpretation. The VUV spectrum has led to identification of a considerable number of Rydberg states for the first time. The Franck-Condon (FC) analyses including both hot and cold bands lead to identification of the vibrational structure of both ionic and electronically excited states including two Rydberg states. The UV onset has been interpreted in some detail, and an interpretation based on the superposition of FC and Herzberg-Teller contributions has been performed. In a similar way, the 6 eV absorption band which is poorly resolved is analysed in terms of the presence of two ππ* states of {sup 1}A{sub 1} (higher oscillator strength) and {sup 1}B{sub 2} (lower oscillator strength) symmetries, respectively. The detailed analysis of the vibrational structure of the 2{sup 2}B{sub 1} ionic state is particularly challenging, and the best interpretation is based on equation-of-motion-coupled cluster with singles and doubles computations. A number of equilibrium structures of the ionic and singlet excited states show that the molecular structure is less subject to variation than corresponding studies for iodobenzene. The equilibrium structures of the 3b{sub 1}3s and 6b{sub 2}3s (valence shell numbering) Rydberg states have been obtained and compared with the corresponding ionic limit structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Edge Dislocations Induce Improved Photocatalytic Efficiency of Colored TiO2

Titanium oxide is the most widely used material for photocatalytic applications due to its low cost and environmental friendliness. One of the grand challenges to improve its energy conversion efficiency is to utilize more visible light while inhibiting the recombination of photo-generated electrons and holes. We use a one-step hydro-solvothermal method to obtain colored ultra-fine nanowires of rutile and nanoparticles of anatase with edge dislocations, which induced broadened visible solar absorption (400-900 nm) and improved photocatalytic efficiency up to 1.8 times that of rutile or anatase without defects. Enhanced photocatalytic activity of these structures is demonstrated by photodegrading methylene blue measurements under simulated solar light irradiation. Results show the existence of Ti3+, induced by edge dislocations, and subsequent electronic band structure-property relationships. This work highlights a strategy for generating sufficient desired defects in TiO2 nanostructures, leading to broadened visible solar absorption and improved photocatalytic efficiency under visible light irradiation.

Ren, Peng↗

Electronic and vibrational properties of bulk Cr 2 Ge 2 Te 6 from first-principles calculations

Here we use density functional theory based ab initio calculations to investigate the structural, vibrational, magnetic, and electronic properties of the layered ferromagnet Cr 2 Ge 2 Te 6 (CGT) that has attracted attention for potential spintronic applications. We optimize the structure for a fixed c/a ratio. Our results are in excellent agreement with experimental data on structure, phonons, and electronic properties. The use of van der Waals interactions and relativistic spin-orbit coupling yields accurate lattice constants and interlayer distances. Simultaneously, the adopted theoretical methods lead to a rigorous description of the vibrational normal modes, as well as the valence bands, that are in excellent agreement with Raman spectroscopy and angle-resolved photoemission spectroscopy spectra, respectively. The magnetic moment is slightly overestimated, and the magnetic anisotropy has the correct sign but is greater in magnitude than that in experiment. We find that inclusion of the on-site Coulomb repulsion on Cr−3d orbitals worsens agreement with experiment, in contrast to previous studies. Our results provide a path toward ab initio analysis of magnetic heterostructures based on CGT.

36 MATERIALS SCIENCE↗

Half-Heusler topological insulators: A first-principles study with the Tran-Blaha modified Becke-Johnson density functional

We systematically investigate the topological band structures of half-Heusler compounds using first- principles calculations. The modified Becke-Johnson exchange potential together with local-density approxi- mation for the correlation potential MBJLDA has been used here to obtain accurate band inversion strength and band order. Our results show that a large number of half-Heusler compounds are candidates for three- dimensional topological insulators. The difference between band structures obtained using the LDA and MB- JLDA potential is also discussed.

36 MATERIALS SCIENCE↗