Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONJUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Effects of Nozzle Radial Position, Separation Angle, and Gas Flow Partitioning on the Mixing, Eye Area, and Wall Shear Stress in Ladles Fitted with Dual Plugs

Mixing time, slag eye area, and wall shear stress in a ladle fitted with dual plugs have been studied as a function of operating variables, namely, gas flow rate, radial nozzle position, separation angle between nozzles and flow rate partitioning. While the mixing time and slag eye area have been experimentally investigated in a scaled water model (with and without a top slag layer), the shear stress on the vessel wall has been studied computationally via a RANS-based turbulent, three-dimensional coupled Eulerian–Lagrangian (VOF-DPM), multiphase flow model. Experimental and computational results have indicated that the mixing, eye area, and wall shear stress depend on the gas flow rate, i.e., while mixing efficiency increases with the increasing gas flow rate, the slag eye area, and wall shear stress, in contrast, become more pronounced with the increasing gas flow, leading to an undesirable operating regime. The radial nozzle position, separation angle between the nozzles and flow rate partitioning at any given flow rate also influence the ladle process performance, influencing the mixing, eye area, and wall shear stress, albeit to a varied degree. Within the range of operating conditions studied, an expected inverse correspondence between mixing time and shear behavior was observed. Experimental and computational results in conjunction have indicated that the best arrangement of porous plugs or gas injection nozzles for superior ladle process performance is dependent on the gas flow rate and is specific to the desired objective (i.e., decreasing the mixing time, or slag eye area and wall shear stress). Hence, a unique gas injection practice cannot and should not be suggested as the optimum for ladle metallurgy in steelmaking. Nevertheless, if the mixing time is the parameter of primary interest, a nozzle configuration with equal flow partitioning (1:1) between the nozzles and identical nozzle radial positions (0.7R/0.7R, 45 deg) should suffice for both low and high gas flow rates. In contrast, a nonidentical nozzle radial position (0.7R/0.5R, 90 deg) and an unequal gas flow rate per nozzle (1:3) appear preferable if both ladle eye and shear stresses, rather than mixing, are the issues of concern.

36 MATERIALS SCIENCE↗

Influence of Temperature on Reaction Mechanism of Ilmenite Ore Smelting for Titanium Production

The carbothermic smelting reduction process of ilmenite ore at high temperature was investigated by thermodynamic calculations in conjunction with smelting experiments. Based on thermodynamic calculations, conducting the smelting process at a higher temperature was recommended to achieve a larger amount of FeO reduction, i.e., higher Ti-enrichment, as less precipitate and thus large amounts of a liquid slag were predicted. However, even though the reduction of FeO in ilmenite ore at the initial stage seemed to be faster as the temperature increased, no significant difference in the TiO{sub 2} or FeO concentration was observed after the reaction was complete, regardless of the temperature. This was caused by the precipitation of pseudobrookite due to the local depletion of FeO during reaction at higher temperatures, by which further reduction reaction was prohibited. The apparent rate constant increased with increasing temperature and the activation energy of the reduction process was estimated to be 144 kJ/mol, from which it was concluded that the reduction reaction of FeO in ilmenite slag by carbonaceous reductant was generally controlled through the mass transfer in the slag phase. Additionally, the formation of TiC also occurred in the iron bath. At 1923 K (1650 °C), approx. 20 pct more TiC was generated as compared to TiC formation at 1823 K (1550 °C), which also prevented further reduction of Fe at higher temperatures.

36 MATERIALS SCIENCE↗

Validation of the dynamic recrystallization (DRX) mechanism for whisker and hillock growth on thin films

Our study was performed to validate a first-principles model for whisker and hillock formation based on the cyclic dynamic recrystallization (DRX) mechanism in conjunction with long-range diffusion. The test specimens were evaporated Sn films on Si having thicknesses of 0.25 μm, 0.50 μm, 1.0 μm, 2.0 μm, and 4.9 μm. Air annealing was performed at 35°C, 60°C, 100°C, 120°C, or 150°C over a time duration of 9 days. The stresses, anelastic strains, and strain rates in the Sn films were predicted by a computational model based upon the constitutive properties of 95.5Sn-3.9Ag-0.6Cu (wt.%) as a surrogate for pure Sn. The cyclic DRX mechanism and, in particular, whether long whiskers or hillocks were formed, was validated by comparing the empirical data against the three hierarchal requirements: (1) DRX to occur at all: εc = A D o m Z n , (2) DRX to be cyclic: D o < 2D r, and (3) Grain boundary pinning (thin films): h versus d. Continuous DRX took place in the 2.0-μm and 4.9-μm films that resulted in short stubby whiskers. Depleted zones, which resulted solely from a tensile stress-driven diffusion mechanism, confirmed the pervasiveness of long-range diffusion so that it did not control whisker or hillock formation other than a small loss of activity by reduced thermal activation at lower temperatures. Furthermore, a first-principles DRX model paves the way to develop like mitigation strategies against long whisker growth.

36 MATERIALS SCIENCE↗

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Selective laser melting (SLM) process is characterized by large temperature gradients resulting in high levels of residual stress within the additively manufactured metallic structure. SLM-processed Ti6Al4V yields a martensitic microstructure due to the rapid solidification and results in a ductility generally lower than a hot working equivalent. Post-process heat treatments can be applied to SLM components to remove in-built residual stress and improve ductility. Residual stress buildup and the mechanical properties of SLM parts can be controlled by varying the SLM process parameters. This investigation studies the effect of layer thickness on residual stress and mechanical properties of SLM Ti6Al4V parts. This is the first-of-its kind study on the effect of varying power and exposure in conjunction with keeping the energy density constant on residual stress and mechanical properties of SLM Ti6Al4V components. It was found that decreasing power and increasing exposure for the same energy density lowered the residual stress and improved the % elongation of SLM Ti6Al4V parts. Increasing layer thickness resulted in lowering the residual stress at the detriment of mechanical properties. The study is based on detailed experimental analysis along with finite element simulation of the process using ABAQUS to understand the underlying physics of the process.

36 MATERIALS SCIENCE↗

Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy

Grain structure and mechanical properties of 6063 Al alloy subjected to one, two and three passes via combined rolling–ECAP at room temperature were investigated. The yield strength (196 MPa) and tensile strength (242 MPa) after three passes increased by 3.7 times and three times, respectively, relative to the initial annealed alloy (YS: 53 MPa, UTS: 82 MPa). Heat treatment comprising homogenizing annealing (600 °C, 15 min), water quenching from 520 °C and reheating to 100 °C before each pass led to ultrafine grains (600-800 nm) and high yield strength (245 MPa) and tensile strength (277 MPa). The three-pass combined rolling–ECAP process in conjunction with a suitable heat treatment is an effective way to form UFG structure and improved mechanical properties in 6063 Al alloy.

36 MATERIALS SCIENCE↗

Microstructure Evolution and Stress Corrosion Cracking Susceptibility of 12Cr Martensitic Steel Upon Long-Term Service in Power Plants

After 230,000-h long-term service at 550 °C/13.7 MPa, the microstructure of a kind of 12Cr martensitic steel was investigated using scanning electron microscopy, backscattering electron microscope and x-ray diffraction analysis. The results show that the precipitation and coarsening of carbides at grain/lath boundaries are the main cause of microstructure degradation. The static immersion tests and the slow strain rate test coupled with electrochemical impedance spectroscopy were conducted on the served steel in 1.0% NaCl solution, and it turns out that the pitting corrosion resistance and repassivation ability of the steel are significantly reduced as a result of microstructure degradation. The stress corrosion cracking susceptibility of the steel was also studied. Fracture morphology analysis shows that the secondary crack in conjunction with slip lines is a result of the coalescence of micro-cracks nucleated from the pits.

36 MATERIALS SCIENCE↗

Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys

The manufacturing process of multiport extrusion tubes generally includes homogenization, extrusion, roll leveling and heat treatment. In order to investigate the influence of the manufacturing procedures on strength variation of multiport extrusion tubes made of A1100 and A3102 alloys, the tube fabrication experiments and following materials characterization are carried out. The alloys’ stress–strain curves after every processing procedure are measured, and pressure-bearing capacity of the tubes is tested. The tubes’ strength and pressure-bearing capacity reach the peak values after straightening process and drop to the minimum after annealing. The contributions of solid solution hardening, grain boundary hardening and constituent particle strengthening to yield strength are evaluated. It is deduced that cluster hardening is the dominant strengthening mechanism for the as-homogenized and as-extruded samples; the contribution of clusters is second to work hardening after straightening process; slight cold work in conjunction with high-temperature annealing accelerates abnormal grain growth. The loss of strength increment from clusters can be interpreted by the remarkable reduction of high-angle grain boundaries after abnormal grain growth.

36 MATERIALS SCIENCE↗

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present paper, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to develop significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. Finally, the experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Functional Genomics of Serotonin Receptor 2A (HTR2A) : Interaction of Polymorphism, Methylation, Expression and Disease Association

Serotonergic neurotransmission plays a key role in the pathophysiology of neuropsychiatric illnesses. The functional significance of a promoter polymorphism, -1438G/A (rs6311), in one of the major genes of this system (serotonin receptor 2A, HTR2A) remains poorly understood in the context of epigenetic factors, transcription factors and endocrine influences. We used functional and structural equation modeling (SEM) approaches to assess the contributions of the polymorphism (rs6311), DNA methylation and clinical variables to HTR2A expression in chronic fatigue syndrome (CFS) subjects from a population-based study. HTR2A was up-regulated in CFS through allele-specific expression modulated by transcription factors at critical sites in its promoter: an E47 binding site at position -1,438, (created by the A-allele of rs6311 polymorphism), a glucocorticoid receptor (GR) binding site encompassing a CpG at position -1,420, and Sp1 binding at CpG methylation site -1,224. Methylation at -1,420 was strongly correlated with methylation at -1,439, a CpG site that is dependent upon the G-allele of rs6311 at position -1,438. SEM revealed a strong negative interaction between E47 and GR binding (in conjunction with cortisol level) on HTR2A expression. This study suggests that the promoter polymorphism (rs6311) can affect both transcription factor binding and promoter methylation, and this along with an individual’s stress response can impact the rate of HTR2A transcription in a genotype and methylation-dependent manner. This study can serve as an example for deciphering the molecular determinants of transcriptional regulation of major genes of medical importance by integrating functional genomics and SEM approaches. Confirmation in an independent study population is required.

59 BASIC BIOLOGICAL SCIENCES↗

Do Yield and Quality of Big Bluestem and Switchgrass Feedstock Decline over Winter?

Switchgrass (Panicum virgatum L.) and big bluestem (Andropogon gerdardii Vitman) are potential perennial bioenergy feedstocks. Feedstock storage limitations, labor constraints for harvest, and environmental benefits provided by perennials are rationales for developing localized perennial feedstock as an alternative or in conjunction with annual feedstocks (i.e., crop residues). Little information is available on yield, mineral, and thermochemical properties of native species as related to harvest time. The study’s objectives were to compare the feedstock quantity and quality between grasses harvested in the fall or the following spring. It was hypothesized that biomass yield may decline, but translocation and/or leaching of minerals from the feedstock would improve feedstock quality. Feedstock yield did not differ by crop, harvest time, or their interactions. Both grasses averaged 6.0 Mg ha-1 (fall) and 5.4 Mg ha-1 (spring) with similar high heating value (17.7 MJ kg-1). The K/(Ca + Mg) ratio, used as a quality indicator declined to below a 0.5 threshold, but energy yield (Megajoule per kilogram) decreased 13% by delaying harvest until spring. Only once during the four study-years were conditions ideal for early spring harvest, in contrast during another spring, very muddy conditions resulted in excessive soil contamination. Early spring harvest may be hampered by late snow, lodging, and muddy conditions that may delay or prevent harvest, and result in soil contamination of the feedstock. However, reducing slagging/fouling potential and the mass of mineral nutrients removed from the field without a dramatic loss in biomass or caloric content are reasons to delay harvest until spring.

09 BIOMASS FUELS↗

Investigating the Interaction Between Circulating Tumor Cells and Local Hydrodynamics via Experiment and Simulations

Introduction: The biological and mechanical properties of circulating tumor cells (CTCs) in combination with the hemodynamics affect the preference of metastatic sites in the vasculature. Despite the extensive literature on the effects of biological properties on cell adhesion, the effects of hydrodynamic forces on primary attachment remains an active area of research. Here, using simulations in conjunction with experimentation, we provide new insight into the interplay of CTCs dynamics and local hydrodynamics. Methods: A flow experiment of CTC attachment was performed within a bioprinted, double branching endothelialized vessel. Simulations of fluid flow and CTC transport in the reconstructed and idealized bifurcated vessel were respectively performed by HARVEY, our in-house massively parallel computational fluid dynamics solver. HARVEY is based on the lattice Boltzmann and finite element methods to model the fluid and cells dynamics. The immersed boundary method is employed for resolving the fluid–structure interaction. Results: CTC attachment was quantified experimentally at all regions of the complex vessel. The results demonstrate a clear preference for CTCs to attach at the branch points. To elucidate the effect of the vessel topology on the location of attachment, a fluid-only simulation was performed assessing the differences in the hydrodynamics along the vessel. CTC transport in idealized bifurcated vessels was subsequently studied to examine the effects of cell deformability on the local hydrodynamics patterns and, thus, the preference of attachment sites. Conclusions: The current work provides evidence on the correlation of the hydrodynamics forces arising from the vessel topology and CTC properties on the attachment regions.

60 APPLIED LIFE SCIENCES↗

Theoretical investigations of electrical transport properties in CoSb3 skutterudites under hydrostatic loadings

We report that CoSb 3 -based skutterudites have been a benchmark mid-temperature thermoelectric material under intensive experimental and theoretical studies for decades. Doping and filling, to the first order, alter the crystal lattice constant of CoSb 3 in the context of “chemical pressure.” In this work, we employed ab initio density functional theory in conjunction with semiclassical Boltzmann transport theory to investigate the mechanical properties and especially how hydrostatic loadings, i.e., “physical pressure,” impact the electronic band structure, Seebeck coefficient, and power factor of pristine CoSb 3 . It is found that hydrostatic pressure enlarges the band gap, suppresses the density of states (DOS) near the valence band edge, and fosters the band convergence between the valley bands and the conduction band minimum (CBM). By contrast, hydrostatic tensile reduces the band gap, increases the DOS near the valence band edge, and diminishes the valley bands near the CBM. Therefore, applying hydrostatic pressure provides an alternative avenue for achieving band convergence to improve thermoelectric properties of N-type CoSb 3 , which is further supported by our carrier concentration studies. Lastly, these results provide valuable insight into the further improvement of thermoelectric performance of CoSb 3 -based skutterudites via a synergy of physical and chemical pressures.

36 MATERIALS SCIENCE↗

How Constant Momentum Acceleration Decouples Energy and Space Focusing in Distance-of-Flight and Time-of-Flight Mass Spectrometries

Time-of-flight (TOF) and distance-of-flight (DOF) mass spectrometers require means for focusing ions at the detector(s) because of initial dispersions of position and energy at the time of their acceleration. Time-of-flight mass spectrometers ordinarily employ constant energy acceleration (CEA), which creates a space-focus plane at which the initial spatial dispersion is corrected. In contrast, constant-momentum acceleration (CMA), in conjunction with an ion mirror, provides focus of the initial energy dispersion at the energy focus time for ions of all m/z at their respective positions along the flight path. With CEA, the initial energy dispersion is not simultaneously correctable as its effect on ion velocity is convoluted with that of the spatial dispersion. The initial spatial dispersion with CMA remains unchanged throughout the field-free region of the flight path, so spatial dispersion can be reduced before acceleration. Improved focus is possible when each dispersion can be addressed independently. With minor modification, a TOF mass spectrometer can be operated in CMA mode by treating the TOF detector as though it were a single element in the array of detectors that would be used in a DOF mass spectrometer. Significant improvement in mass resolution is thereby achieved, albeit over a narrow range of m/z values. In this paper, experimental and theoretical results are presented that illustrate the energy-focusing capabilities of both DOF and TOF mass spectrometry.

Dennis, Elise↗

Spatial Ion Peak Compression and its Utility in Ion Mobility Spectrometry

A novel concept for ion spatial peak compression is described, and discussed primarily in the context of ion mobility spectrometry (IMS). Using theoretical and numerical methods, the effects of using non-constant (e.g., linearly varying) electric fields on ion distributions (e.g., an ion mobility peak) is evaluated both in the physical and temporal domains. The application of linearly decreasing electric field in conjunction with conventional drift field arrangements is shown to lead to a reduction in IMS physical peak width. When multiple ion packets in a selected mobility window are simultaneously subjected to such fields, there is ion packet compression, i.e., a reduction in peak widths of all species. This peak compression occurs with a modest reduction of resolution, but which can be quickly recovered as ions drift in a constant field after the compression event. Compression also yields a significant increase in peak intensities. In addition, approaches for peak compression in traveling wave IMS are also discussed. Ion mobility peak compression can be particularly useful for mitigating diffusion driven peak spreading over very long path length separations (e.g., in cyclic multi-pass arrangements), and for achieving higher S/N and IMS resolution over a selected mobility range.

Environmental Molecular Sciences Laboratory↗

Co-adsorption of O{sub 2} and C{sub 2}H{sub 4} on a Free Gold Dimer Probed via Infrared Photodissociation Spectroscopy

Infrared multiple photon dissociation (IR-MPD) spectroscopy in conjunction with density functional theory (DFT) calculations has been employed to study the activation of molecular oxygen and ethylene co-adsorbed on a free gold dimer cation Au{sub 2}{sup +}. Both studied complexes, Au{sub 2}O{sub 2}(C{sub 2}H{sub 4}){sup +} and Au{sub 2}O{sub 2}(C{sub 2}H{sub 4}){sub 2}{sup +}, show distinct features of both intact O{sub 2} and ethylene co-adsorbed on the cluster. However, the ethylene C=C double bond is activated, increasing in length by up to 0.07 Å compared with the free molecule, and the red shift of the O–O vibration frequency increases with the number of adsorbed ethylene molecules, indicating a small but increasing activation of the O–O bond. The small O{sub 2} activation and the rather weak interaction between O{sub 2} and C{sub 2}H{sub 4} are also reflected in the calculated electronic structure of the co-adsorption complexes which shows only a small occupation of the empty anti-bonding O{sub 2} 2π{sup *}{sub 2p} orbital as well as the localization of most of the Kohn–Sham orbitals on O{sub 2} and C{sub 2}H{sub 4}, respectively, with only limited mixing between O{sub 2} and C{sub 2}H{sub 4} orbitals. The results are compared with theoretical studies on neutral Au{sub x}O{sub 2}(C{sub 2}H{sub 4}) (x = 3, 5, 7, 9) complexes. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Numerical simulations of chaotic and complex spatiotemporal patterns in fractional reaction–diffusion systems

The generalized fractional reaction–diffusion equations which exist in the form of noninteger order partial differential equations have now found wide application for illustrating important and useful physical phenomena, such as subdiffusive and superdiffusive scenarios. The space fractional derivatives are defined in the Riesz sense on the intervals 0 < α < 1 and 1 < α ≤ 2. We propose robust numerical techniques, such as a spectral representation of the fractional Laplacian operator in conjunction with the exponential time differencing method, and present the equivalent relationship between the Riesz fractional derivative and fractional Laplacian operator. We apply these techniques to numerically solve a range of chaotic processes, such as the Chua’s equations, Rössler system, Lorenz and Lorenz-type systems. Simulation results revealed various complex and spatiotemporal chaos, spiral chaos, intermittent chaos and spots patterns in two-dimensional space fractional reaction–diffusion problems.

97 MATHEMATICS AND COMPUTING↗

Modeling the diffusion of heat energy within composites of homogeneous materials using the uncertainty principle

The goal of this paper is to develop a highly accurate and efficient numerical method for the solution of a time-dependent partial differential equation with a piecewise constant coefficient, on a finite interval with periodic boundary conditions. The resulting algorithm can be used, for example, to model the diffusion of heat energy in one space dimension, in the case where the spatial domain represents a medium consisting of two homogeneous materials. The resulting model has, to our knowledge, not yet been solved in closed form through analytical methods, and is difficult to solve using existing numerical methods, thus suggesting an alternative approach. The approach presented in this paper is to represent the solution as a linear combination of wave functions that change frequencies at the interfaces between different materials. It is demonstrated through numerical experiments that using the Uncertainty Principle to construct a basis of such functions, in conjunction with a spectral method, a mathematical model for heat diffusion through different materials can be solved much more efficiently than with conventional time-stepping methods.

97 MATHEMATICS AND COMPUTING↗