Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONVENTIONAL RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

"Pelled-film" solar cells

Cells are lighter and less expensive than conventional cells. GaAs cells are deposited on GaAs substrate coated with thin etchable layer that allows completed cell film to be peeled away from substrate. At estimated conversion of 18 percent, array of cells delivers about 1 kW of electricity per kilogram of cell material. Blanket of cells delivers energy at power-to-weight ratio about 4 times that of conventional 2-mil (0.5-mm) silicon solar cells. GaAs solar cells have better radiation resistance than silicon cells.

Stirn, R. J.↗

Solving the current element problem over lossy half-space without Sommerfeld integrals

An approach is presented for efficient computation of the vector potentials arising in the problem of a current element radiating over a lossy half-space. The present approach departs from the conventional ones in that it works primarily with the transform domain representations rather than with the Sommerfeld integrals which are the corresponding spatial domain counterparts. The key step in the present method is to approximate the transforms using a suitable approximation which is valid for a wide range of parameters of practical interest. The approximated transforms can be inverted in a closed form for the horizontal component of the vector potentials and can be expressed in a computationally efficient form for the vertical component. Numerical results illustrating the accuracy of the method are presented and some estimates of comparative computational times are also included.

Mittra, R.↗

The hot spot of vegetation canopies

A conventional radiometer is used to identify the hot spot (the peak in reflected radiation in the retrosolar direction) of vegetation. A multiwavelength-band radiometer collected radiances on fully grown dense wheat and maize canopies on several clear sunny days. It is noted that the hot spot is difficult to detect in the near IR wavelengths because the shadows are much darker. In general, the retrosolar brightness is found to be higher for smaller sun polar angles than for larger angles.

Myneni, Ranga B.↗

Bulk Micromachined 6H-SiC High-g Piezoresistive Accelerometer Fabricated and Tested

High-g accelerometers are needed in certain applications, such as in the study and analysis of high-g impact landings and projectiles. Also, these accelerometers must survive the high electromagnetic fields associated with the all-electric vehicle technology needed for aerospace applications. The choice of SiC is largely due to its excellent thermomechanical properties over conventional silicon-based accelerometers, whose material properties inhibit applicability in high electromagnetic radiation and high temperatures (>150 C) unless more complex and sometimes costly packaging schemes are adopted. This work was the outcome of a NASA Glenn Research Center summer internship program, in collaboration with Cornell University and the Munitions Directorate of the U.S. Air Force in Eglin, Florida. It aimed to provide the enabling technology infrastructure (modeling, fabrication, and validation) for the implementation of SiC accelerometers designed specifically for harsh environments.

Okojie, Robert S.↗

Temperature Responses to Spectral Solar Variability on Decadal Time Scales

Two scenarios of spectral solar forcing, namely Spectral Irradiance Monitor (SIM)-based out-of-phase variations and conventional in-phase variations, are input to a time-dependent radiative-convective model (RCM), and to the GISS modelE. Both scenarios and models give maximum temperature responses in the upper stratosphere, decreasing to the surface. Upper stratospheric peak-to-peak responses to out-of-phase forcing are approx.0.6 K and approx.0.9 K in RCM and modelE, approx.5 times larger than responses to in-phase forcing. Stratospheric responses are in-phase with TSI and UV variations, and resemble HALOE observed 11-year temperature variations. For in-phase forcing, ocean mixed layer response lags surface air response by approx.2 years, and is approx.0.06 K compared to approx.0.14 K for atmosphere. For out-of-phase forcing, lags are similar, but surface responses are significantly smaller. For both scenarios, modelE surface responses are less than 0.1 K in the tropics, and display similar patterns over oceanic regions, but complex responses over land.

Cahalan, Robert F.↗

Conducting Wall Hall Thrusters

A unique configuration of the magnetic field near the wall of Hall thrusters, called Magnetic Shielding, has recently demonstrated the ability to significantly reduce the erosion of the boron nitride (BN) walls and extend the life of Hall thrusters by orders of magnitude. The ability of magnetic shielding to minimize interactions between the plasma and the discharge chamber walls has for the first time enabled the replacement of insulating walls with conducting materials without loss in thruster performance. The boron nitride rings in the 6 kW H6 Hall thruster were replaced with graphite that self-biased to near the anode potential. The thruster efficiency remained over 60% (within two percent of the baseline BN configuration) with a small decrease in thrust and increase in Isp typical of magnetically shielded Hall thrusters. The graphite wall temperatures decreased significantly compared to both shielded and unshielded BN configurations, leading to the potential for higher power operation. Eliminating ceramic walls makes it simpler and less expensive to fabricate a thruster to survive launch loads, and the graphite discharge chamber radiates more efficiently which increases the power capability of the thruster compared to conventional Hall thruster designs.

electric propulsion (EP)↗

Extending XBAER Algorithm to Aerosol and Cloud Condition

The retrieval of cloud optical properties for aerosol contaminated water cloud is challenging because of the complexity of physical processes in such situations. Conventionally, cloud optical data products are typically derived, ignoring the aerosol impacts on radiative transfer in the retrieval process. This is potentially a significant source of error. In this paper, the eXtensible Bremen Aerosol Retrieval (XBAER) algorithm has been optimized for the retrieval of aerosol/cloud properties for the aerosol contaminated cloud (ACC) scenarios. This version of XBAER delivers cloud optical thickness (COT) and cloud effective radius (CER) for ACCs and simultaneously retrieves aerosol optical thickness (AOT). The surface parameterization and aerosol types used in the standard XBAER algorithm have been adapted in this retrieval to account for the ACC conditions. Aerosol types in XBAER for the retrieval of ACC scenarios have been parameterized to comprise weak and strong absorptions. The comparisons of COT, CER, and AOT retrieved using this adapted XBAER algorithm and two new NASA algorithms show good agreements, especially for biomass burning aerosol. The correlation coefficients are >0.9 for AOT, ~0.8 for CER, and ~0.7 for COT. There is also a good agreement for dust plume contaminated cloud scene. The XBAER derived AOT values for dust aerosols are systematically smaller than the NASA retrieval, but both products have the same spatial distribution patterns. The comparison of COT retrieved using the adapted XBAER algorithm and that retrieved from ground-based microwave radiometer (MWR) measurements shows much better agreement for ACC conditions with high AOT.

satellite↗

Experimental Characterization of Additively Manufactured Nickel-Titanium Shape Memory Alloy Heat Pipes

Shape memory alloys (SMA) have been identified for use in spacecraft components as replacement for conventional deployment mechanisms. They may be used in thermal management components such as radiators to create self-deploying radiators. One SMA, NiTi, has also been developed for additive manufacturing processes. Heat pipes are a common way to create highly effective and lightweight spaceflight radiators, and heat pipes can also be made from NiTi and related alloys. The wick is the critical element of a functioning heat pipe, and recent progress over the past years has led to the development of additively manufactured heat pipe wicks in various materials. The combination of these efforts is the focus of this project: creating an additively manufactured, shape memory alloy self-deploying heat pipe radiator. This paper will focus on the experimental characterization of these additively manufactured NiTi heat pipes. The heat pipe coupons were additively manufactured by direct metal laser sintering (DMLS), with an integral liquid cooled condenser. Heat is input to the heat pipe via a thin film heater. Thermocouples were spot welded to the heat pipes to measure temperature at several axial locations. The heat pipes were tested with two working fluids: water and ethanol. Ethanol is not an ideal working fluid for heat pipes but is useful in characterizing them because it wets well to a wide variety of surfaces. Water is in general a superior working fluid for heat pipes, but its contact angle and therefore wicking performance strongly depends on the surface chemistry of the surface it is in contact with. A particular measurement of interest in this test is the evaporator to condenser thermal conductance, which will be compared in the full paper to recently published correlations for additively manufactured heat pipes. Experimental results for two straight geometry and one bellows geometry heat pipe will be presented. The bellows geometry is of interest for condenser of the self-deploying radiator design.

Additive manufacturing↗

Nondestructive Evaluation of Nuclear-Grade Graphite

Nondestructive Evaluation of Nuclear Grade Graphite Dennis C. Kunerth and Timothy R. McJunkin Idaho National Laboratory Idaho Falls, ID, 83415 This paper discusses the nondestructive evaluation of nuclear grade graphite performed at the Idaho National Laboratory. Graphite is a composite material highly dependent on the base material and manufacturing methods. As a result, material variations are expected within individual billets as well billet to billet and lot to lot. Several methods of evaluating the material have been explored. Particular technologies each provide a subset of information about the material. This paper focuses on techniques that are applicable to in-service inspection of nuclear energy plant components. Eddy current examination of the available surfaces provides information on potential near surface structural defects and although limited, ultrasonics can be utilized in conventional volumetric inspection. Material condition (e.g. micro-cracking and porosity induced by radiation and stress) can be derived from backscatter or acousto-ultrasound (AU) methods. Novel approaches utilizing phased array ultrasonics have been attempted to expand the abilities of AU techniques. By combining variable placement of apertures, angle and depth of focus, the techniques provide the potential to obtain parameters at various depths in the material. Initial results of the study and possible procedures for application of the techniques are discussed.

36 MATERIALS SCIENCE↗

Organic-semiconducting hybrid solar cell

The embodiment of this invention lies on experimental evidence of photoconductivity activity of a hybrid solar cell, organic/chalcogenide. The device is made of thin layers of conductive indium-tin-oxide (ITO) on glass with a 100 nm layer of chalcogenide molybdenum di-sulfide (MoS 2 ) and a thin layer of about ˜50 nm of complex organic compound assembled at room temperature. The device was tested to conventional electrical transport measurements in the regime of −1V to 1V under electromagnetic radiation simulator at 100 mW/cm 2 . Results indicate solar conversion efficiency of 2.48% and current density of 6.35 mA/cm 2 .

14 SOLAR ENERGY↗

Dissipation of radiation energy in concentrated solid-solution alloys: Unique defect properties and microstructural evolution

The effort to develop metallic alloys with increased structural strength and improved radiation performance has focused on the incorporation of either solute elements or microstructural inhomogeneities to mitigate damage. The recent discovery and development of single-phase concentrated solid-solution alloys (SP-CSAs) has prompted fundamental questions that challenge established theories and models currently applicable to conventional alloys. Here, the current understanding of electronic and atomic effects, defect evolution, and microstructure progression suggests that radiation energy dissipates in SP-CSAs at different interaction strengths via energy carriers (electrons, phonons, and magnons). Modification of electronic- and atomic-level heterogeneities and tailoring of atomic transport processes can be realized through tuning of the chemical complexity of SP-CSAs by the selection of appropriate elements and their concentrations. Fundamental understanding of controlling energy dissipation via site-to-site chemical complexity reveals new design principles for predictive discovery and guided synthesis of new alloys with targeted functionalities, including radiation tolerance.

36 MATERIALS SCIENCE↗

Rapid inactivation of Penicillium digitatum spores using high-density nonequilibrium atmospheric pressure plasma

A promising, environmentally safe method for inactivating fungal spores of Penicillium digitatum, a difficult-to-inactivate food spoilage microorganism, was developed using a high-density nonequilibrium atmospheric pressure plasma (NEAPP). The NEAPP employing Ar gas had a high electron density on the order of 10{sup 15} cm{sup -3}. The spores were successfully and rapidly inactivated using the NEAPP, with a decimal reduction time in spores (D value) of 1.7 min. The contributions of ozone and UV radiation on the inactivation of the spores were evaluated and concluded to be not dominant, which was fundamentally different from the conventional sterilizations.

60 APPLIED LIFE SCIENCES↗

Polarization-dependent thin-film wire-grid reflectarray for terahertz waves

A thin-film polarization-dependent reflectarray based on patterned metallic wire grids is realized at 1 THz. Unlike conventional reflectarrays with resonant elements and a solid metal ground, parallel narrow metal strips with uniform spacing are employed in this design to construct both the radiation elements and the ground plane. For each radiation element, a certain number of thin strips with an identical length are grouped to effectively form a patch resonator with equivalent performance. The ground plane is made of continuous metallic strips, similar to conventional wire-grid polarizers. The structure can deflect incident waves with the polarization parallel to the strips into a designed direction and transmit the orthogonal polarization component. Measured radiation patterns show reasonable deflection efficiency and high polarization discrimination. Utilizing this flexible device approach, similar reflectarray designs can be realized for conformal mounting onto surfaces of cylindrical or spherical devices for terahertz imaging and communications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical evaluation of multichannel radiative transitions originating from {sup 4}G{sub 5/2} level of Sm{sup 3+} in heavy-metal-gallate glasses

Conventional visible and novel infrared (IR) emissions of Sm{sup 3+} in heavy-metal-gallate glasses (Li{sub 2}O-K{sub 2}O-BaO-PbO-Bi{sub 2}O{sub 3}-Ga{sub 2}O{sub 3}, LKBPBG for short) with low phonon energy have been observed. Judd-Ofelt parameters {Omega}{sub 2} (3.00x10{sup -20} cm{sup 2}), {Omega}{sub 4} (5.19x10{sup -20} cm{sup 2}), and {Omega}{sub 6} (1.69x10{sup -20} cm{sup 2}) indicate a higher asymmetry and stronger covalent environment in the optical glasses. For the visible fluorescence bands peaked at 564, 601, 648, and 710 nm, the maximum stimulated emission cross-sections ({sigma}{sub e}) were derived to be 1.35x10{sup -22}, 9.21x10{sup -22}, 9.58x10{sup -22}, and 3.91x10{sup -22} cm{sup 2}, respectively, the values are larger than those in phosphate, oxyfluoroborate, tellurite, and calibo glasses obviously. The observed 1185 nm IR emission lies in the low-loss window of telecommunication system, and the maximum value of {sigma}{sub e} for this band was obtained to be 6.09x10{sup -23} cm{sup 2}. The characterization of multichannel radiative transitions of Sm{sup 3+} in LKBPBG glasses is beneficial in exposing its potential applications in visible and IR optoelectronic devices.

36 MATERIALS SCIENCE↗

Design of an optically controlled Ka-band GaAs MMIC phased-array antenna

Phased array antennas long were investigated to support the agile, multibeam radiating apertures with rapid reconfigurability needs of radar and communications. With the development of the Monolithic Microwave Integrated Circuit (MMIC), phased array antennas having the stated characteristics are becoming realizable. However, at K-band frequencies (20 to 40 GHz) and higher, the problem of controlling the MMICs using conventional techniques either severely limits the array size or becomes insurmountable due to the close spacing of the radiating elements necessary to achieve the desired antenna performance. Investigations were made that indicate using fiber optics as a transmission line for control information for the MMICs provides a potential solution. By adding an optical interface circuit to pre-existing MMIC designs, it is possible to take advantage of the small size, lightweight, mechanical flexibility and RFI/EMI resistant characteristics of fiber optics to distribute MMIC control signals. The architecture, circuit development, testing and integration of optically controlled K-band MMIC phased array antennas are described.

Kunath, Richard R.↗

Design of an optically controlled Ka-band GaAs MMIC phased-array antenna

Phased array antennas long were investigated to support the agile, multibeam radiating apertures with rapid reconfigurability needs of radar and communications. With the development of the Monolithic Microwave Integrated Circuit (MMIC), phased array antennas having the stated characteristics are becoming realizable. However, at K-band frequencies (20 to 40 GHz) and higher, the problem of controlling the MMICs using conventional techniques either severely limits the array size or becomes insurmountable due to the close spacing of the radiating elements necessary to achieve the desired antenna performance. Investigations were made that indicate using fiber optics as a transmission line for control information for the MMICs provides a potential solution. By adding an optical interface circuit to pre-existing MMIC designs, it is possible to take advantage of the small size, lightweight, mechanical flexibility and RFI/EMI resistant characteristics of fiber optics to distribute MMIC control signals. The architecture, circuit development, testing and integration of optically controlled K-band MMIC phased array antennas are described.

Kunath, Richard R.↗

Outcomes and Prognostic Variables in Adenoid Cystic Carcinoma of the Head and Neck: A Recent Experience

Purpose: To analyze the recent experience of patients with adenoid cystic carcinoma treated with radiation therapy at Memorial Sloan-Kettering Cancer Center. Methods and Materials: From 1990 to 2004, a total of 59 patients with a diagnosis of primary adenoid cystic carcinoma of the head and neck received radiation therapy at our institution. The subsite distribution was oral cavity, 28% (n = 17); paranasal sinuses, 22% (n = 13); parotid, 14% (n = 8); submandibular, 14% (n = 8); oropharynx, 10% (n = 6); sublingual, 3% (n = 2); nasopharynx, 3% (n = 2); and other, 5% (n = 3). T Stage distribution was T1, 34% (n = 20); T2, 19% (n = 11); T3, 14% (n = 8); and T4, 34% (n = 20). Twenty-nine percent of patients (n = 17) were treated with intensity-modulated radiation therapy; 25% (n =15), with three-dimensional conformal therapy, and the remainder, with conventional techniques. Ninety percent (n = 53) of patients received treatment including the base of skull. Results: Median follow-up for surviving patients was 5.9 years. Five-year and 10-year rates of local control and distant metastases-free survival were 91%/81% and 81%/49%, respectively. Five-year and 10-year rates of disease-free and overall survival were 76%/40% and 87%/65%, respectively. On univariate analysis, stage T4 (p = 0.004) and gross/clinical nerve involvement (p = 0.002) were associated with decreased progression free survival, whereas stage T4 and lymph node involvement were associated with decreased overall survival (p = 0.046 and p < 0.001, respectively). Conclusions: Radiation therapy in combination with surgery produces excellent rates of local control, although distant metastases account for a high proportion of failures. Routine treatment to the base of skull reduces the significance of histologic perineural invasion, but major nerve involvement remains an adverse prognostic factor.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantifying and Modelling the Effect of Cloud Shadows on the Surface Irradiance at Tropical and Midlatitude Forests

Cloud shadows lead to alternating light and dark periods at the surface, with the most abrupt changes occurring in the presence of low-level forced cumulus clouds. We examine multiyear irradiance time series observed at a research tower in a midlatitude mixed deciduous forest (Harvard Forest, Massachusetts, USA: 42.53°N, 72.17°W) and one made at a similar tower in a tropical rain forest (Tapajós National Forest, Pará, Brazil: 2.86°S, 54.96°W). Here, we link the durations of these periods statistically to conventional meteorological reports of sky type and cloud height at the two forests and present a method to synthesize the surface irradiance time series from sky-type information. Four classes of events describing distinct sequential irradiance changes at the transition from cloud shadow and direct sunlight are identified: sharp-to-sharp, slow-to-slow, sharp-to-slow, and slow-to-sharp. Lognormal and the Weibull statistical distributions distinguish among cloudy-sky types. Observers’ qualitative reports of ‘scattered’ and ‘broken’ clouds are quantitatively distinguished by a threshold value of the ratio of mean clear to cloudy period durations. Generated synthetic time series based on these statistics adequately simulate the temporal “radiative forcing” linked to sky type. Our results offer a quantitative way to connect the conventional meteorological sky type to the time series of irradiance experienced at the surface.

54 ENVIRONMENTAL SCIENCES↗