Search NASA⌕ Search

SEARCH · Search NASA

Results for “Counting statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Statistical Analyses of Second Indoor Bio-Release Field Evaluation Study at Idaho National Laboratory

In September 2008 a large-scale testing operation (referred to as the INL-2 test) was performed within a two-story building (PBF-632) at the Idaho National Laboratory (INL). The report “Operational Observations on the INL-2 Experiment” defines the seven objectives for this test and discusses the results and conclusions. This is further discussed in the introduction of this report. The INL-2 test consisted of five tests (events) in which a floor (level) of the building was contaminated with the harmless biological warfare agent simulant Bg and samples were taken in most, if not all, of the rooms on the contaminated floor. After the sampling, the building was decontaminated, and the next test performed. Judgmental samples and probabilistic samples were determined and taken during each test. Vacuum, wipe, and swab samples were taken within each room. The purpose of this report is to study an additional four topics that were not within the scope of the original report. These topics are: 1) assess the quantitative assumptions about the data being normally or log-normally distributed; 2) evaluate differences and quantify the sample to sample variability within a room and across the rooms; 3) perform geostatistical types of analyses to study spatial correlations; and 4) quantify the differences observed between surface types and sampling methods for each scenario and study the consistency across the scenarios. The following four paragraphs summarize the results of each of the four additional analyses. All samples after decontamination came back negative. Because of this, it was not appropriate to determine if these clearance samples were normally distributed. As Table 1 shows, the characterization data consists of values between and inclusive of 0 and 100 CFU/cm2 (100 was the value assigned when the number is too numerous to count). The 100 values are generally much bigger than the rest of the data, causing the data to be right skewed. There are also a significant number of zeros. Using QQ plots these data characteristics show a lack of normality from the data after contamination. Normality is improved when looking at log(CFU/cm2). Variance component analysis (VCA) and analysis of variance (ANOVA) were used to estimate the amount of variance due to each source and to determine which sources of variability were statistically significant. In general, the sampling methods interacted with the across event variability and with the across room variability. For this reason, it was decided to do analyses for each sampling method, individually. The between event variability and between room variability were significant for each method, except for the between event variability for the swabs. For both the wipes and vacuums, the within room standard deviation was much larger (26.9 for wipes and 7.086 for vacuums) than the between event standard deviation (6.552 for wipes and 1.348 for vacuums) and the between room standard deviation (6.783 for wipes and 1.040 for vacuums). Swabs between room standard deviation was 0.151, while both the within room and between event standard deviations are less than 0.10 (all measurements in CFU/cm2).

experimental design↗

Clinical Indication for Computed Tomography During Hepatic Arteriography (CTHA) in Addition to Dynamic CT Studies to Identify Hypervascularity of Hepatocellular Carcinoma

PurposeTo identify factors benefiting from computed tomography during hepatic arteriography (CTHA) in addition to dynamic CT studies at the preoperative evaluation of the hypervascularity of hepatocellular carcinoma (HCC).Materials and MethodsWe retrospectively divided 45 patients with HCC, who underwent both dynamic CT (dCT) and CTHA, into two groups based on the number of hypervascular HCCs identified on dCT and CTHA studies. In group A, the number of HCCs identified by dCT and CTHA was the same and additive CTHA had not been indicated. In group B, fewer HCCs were counted on dCT than on CTHA images, indicating that additive CTHA studies had been appropriate. We compared the patient characteristics, the serum alpha-fetoprotein level, and the tumor-liver contrast (TLC) of the main tumor on dCT scans of both groups. To identify factors alerting to the benefit of additional CTHA studies, we performed univariate logistic regression analysis. Statistically significant parameters were subjected to receiver operating characteristic analysis for obtaining the optimal cutoff value indicative of the benefit of CTHA.ResultsUnivariate analysis identified only the TLC of the main tumor on dCT images as a significant factor for the benefit of CTHA images (P < 0.01). At the optimal cutoff value for the TLC of the main tumor on dCT images (15.9 Hounsfield units), the sensitivity and specificity for the benefit of CTHA were 85.0 and 92.0%, respectively.ConclusionEvaluation of the TLC of the main tumor on dCT scans identifies patients in whom additive CTHA studies are beneficial.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

X-ray cluster constraints on non-Gaussianity

We report constraints on primordial non-Gaussianity from the abundance of X-ray detected clusters. Our analytic prescription for adding non-Gaussianity to the cluster mass function takes into account moments beyond the skewness, and we demonstrate that those moments should not be ignored in most analyses of cluster data. We constrain the amplitude of the skewness for two scenarios that have different overall levels of non-Gaussianity, characterized by how amplitudes of higher cumulants scale with the skewness. We find that current data can constrain these one-parameter non-Gaussian models at a useful level, but are not sensitive to adding further details of the corresponding inflation scenarios. Combining cluster data with Cosmic Microwave Background constraints on the cosmology and power spectrum amplitude, we find the dimensionless skewness to be 10{sup 3}M{sub 3} = −1{sub −28}{sup +24} for one of our scaling scenarios, and 10{sup 3}M{sub 3} = −4±7 for the other. These are the first constraints on non-Gaussianity from Large Scale Structure that can be usefully applied to any model of primordial non-Gaussianity. The former constraint, when applied to the standard local ansatz (where the n-th cumulant scales as M{sub n}∝M{sub 3}{sup n−2}), corresponds to f{sub NL}{sup local} = −3{sub −91}{sup +78}. When applied to a model with a local-shape bispectrum but higher cumulants that scale as M{sub n}∝M{sub 3}{sup n/3} (the second scaling scenario), the amplitude of the local-shape bispectrum is constrained to be f{sub NL}{sup local*} = −14{sub −21}{sup +22}. For this second scaling (which occurs in various well-motivated models of inflation), we also obtain strong constraints on the equilateral and orthogonal shapes of the bispectrum, f{sub NL}{sup equil} = −52{sub −79}{sup +85} and f{sub NL}{sup orth} = 63{sub −104}{sup +97}. This sensitivity implies that cluster counts could be used to distinguish qualitatively different models for the primordial fluctuations that have identical bispectra.

79 ASTRONOMY AND ASTROPHYSICS↗

SWIFT-BAT HARD X-RAY SKY MONITORING UNVEILS THE ORBITAL PERIOD OF THE HMXB IGR J18219–1347

IGR J18219–1347 is a hard X-ray source discovered by INTEGRAL in 2010. We have analyzed the X-ray emission of this source exploiting the Burst Alert Telescope (BAT) survey data up to 2012 March and the X-Ray Telescope (XRT) data that include also an observing campaign performed in early 2012. The source is detected at a significance level of ∼13 standard deviations in the 88 month BAT survey data, and shows a strong variability along the survey monitoring, going from high intensity to quiescent states. A timing analysis on the BAT data revealed an intensity modulation with a period of P {sub 0} = 72.44 ± 0.3 days. The significance of this modulation is about seven standard deviations in Gaussian statistics. We interpret it as the orbital period of the binary system. The light curve folded at P {sub 0} shows a sharp peak covering ∼30% of the period, superimposed to a flat level roughly consistent with zero. In the soft X-rays the source is detected only in 5 out of 12 XRT observations, with the highest recorded count rate corresponding to a phase close to the BAT folded light-curve peak. The long orbital period and the evidence that the source emits only during a small fraction of the orbit suggests that the IGR J18219–1347 binary system hosts a Be star. The broadband XRT+BAT spectrum is well modeled with a flat absorbed power law with a high-energy exponential cutoff at ∼11 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cosmological constraints from Sunyaev-Zeldovich cluster counts: An approach to account for missing redshifts

The accumulation of redshifts provides a significant observational bottleneck when using galaxy cluster surveys to constrain cosmological parameters. We propose a simple method to allow the use of samples where there is a fraction of the redshifts that are not known. The simplest assumption is that the missing redshifts are randomly extracted from the catalog, but the method also allows one to take into account known selection effects in the accumulation of redshifts. We quantify the reduction in statistical precision of cosmological parameter constraints as a function of the fraction of missing redshifts for simulated surveys, and also investigate the impact of making an incorrect assumption for the distribution of missing redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Photon counting processor for laser velocimetry

In some of the more difficult applications of laser Doppler velocimetry such as in combustion research, transonic flow, transverse wind, and others, the optical signals are too small for classical detection methods. This paper summarizes the theory, experimental prototype hardware, and test results for a new type of high-speed photon-correlation signal processor which is being developed for weak laser velocimeter signals and other photon-resolved signals. The new system may also be considered to be a statistical digital frequency discriminator. It uses full multiplication with 10-nsec delay time and has the potential for extension to the measurement of the velocity correlations and spectra.

Mayo, W. T., Jr.↗

Composite-dimensional topological codes with boundaries and defects

We introduce new algorithms and provide example constructions of stabilizer models for the gapped boundaries, domain walls, and 0D defects of Abelian composite-dimensional twisted quantum doubles. Using the physically intuitive concept of condensation, our algorithm explicitly describes how to construct the boundary and domain-wall stabilizers starting from the bulk model. This extends the utility of Pauli stabilizer models in describing nontranslationally invariant topological orders with gapped boundaries. To highlight this utility, we provide a series of examples, including a new family of quantum error-correcting codes where the double of ℤ4 is coupled to instances of the double semion (DS) phase. We discuss the codes' utility in the burgeoning area of quantum error correction with an emphasis on the interplay between deconfined anyons, logical operators, error rates, and decoding. We also augment our construction, built using algorithmic tools to describe the properties of explicit stabilizer layouts at the microscopic lattice level, with dimensional counting arguments and macroscopic-level constructions building on pants decompositions. The latter outlines how such codes' representation and design can be automated. Our results are validated by a series of error-correcting threshold calculations comparing our codes' performance with that of standard surface codes. To do so, we introduce a composite-dimensional belief-propagation decoder with ordered statistics that utilizes combination sweeps. Going beyond our worked-out examples, we expect our explicit step-by-step algorithms to pave the path for higher-dimensional codes to be discovered and implemented in near-future architectures that take advantage of various hardware platforms.

Mousa, Mohamad [Purdue University]↗

The Multiplatform Precipitation Feature (MPF) Database: Synthesizing Satellite and Ground-Based Precipitation and Lightning Datasets for Convective Studies

NASA’s Lightning Imaging Sensor (LIS) and the Global Precipitation Measurement (GPM) mission have contributed a wealth of data toward global lightning and precipitation studies, respectively. Combining lightning and precipitation datasets leverages their unique insights into deep convective processes that inform about characteristics of convection and its intensity. Recent efforts to synthesize the LIS and GPM datasets prepare the opportunity for unprecedented large-scale, value-added multiplatform analyses of convection. This data synthesis proof-of-concept study elaborates on the creation of a database of reflectivity-based multiplatform precipitation features (MPFs) that capture a combination of information extracted from spatiotemporally coincident lightning and precipitation data within individual storm features. The space-based GPM Dual-frequency Precipitation Radar (DPR) provides a record of precipitation data, while the GPM Validation Network (VN) additionally incorporates ground-based polarimetric Doppler radar data to provide microphysical and kinematic context to DPR data. The LIS instrument onboard the International Space Station has contributed lightning observations since 2017. MPFs encapsulating information from these datasets are created from isolated regions of filtered, smoothed DPR reflectivity data to which ellipses are fit. Each MPF includes feature location, size, and eccentricity information as well as summary reflectivity characteristics. They also include summaries of precipitation microphysics and derived three-dimensional wind available from ground-based radar data. LIS data provides standard lightning characteristics such as flash count and density to each MPF as well as other informative metrics such as flash area and radiance. Each MPF file includes information about the original data from which the MPF and its characteristics were determined, allowing end-user reconstruction of the ellipse and deeper “level I” analysis of captured data. This database of VN-LIS MPFs enables broad statistical analysis of the relationships between the microphysical, kinematic, and electrical properties of convection. Preliminary results from a demonstration of the database will be described as well as ongoing efforts and avenues for future work.

Lightning↗

Laboratory studies on surface sampling of Bacillus anthracis contamination: summary, gaps, and recommendations

This article summarizes previous laboratory studies to characterize the performance of methods for collecting, storing/transporting, processing, and analyzing samples from surfaces contaminated by Bacillus anthracis or related surrogates. The focus is on plate culture and count estimates of surface contamination for swab, wipe, and vacuum samples of porous and nonporous surfaces. Summaries of the previous studies and their results were assessed to identify gaps in information needed as inputs to calculate key parameters critical to risk management in biothreat incidents. One key parameter is the number of samples needed to make characterization or clearance decisions with specified statistical confidence. Other key parameters include the ability to calculate, following contamination incidents, the 1) estimates of Bacillus anthracis contamination, as well as the bias and uncertainties in the estimates, and 2) confidence in characterization and clearance decisions for contaminated or decontaminated buildings. Gaps in knowledge and understanding identified during the summary of the studies are discussed. Recommendations are given for future evaluations of data from existing studies and possible new studies.

anthrax↗

Laboratory Studies on Surface Sampling of Bacillus anthracis Contamination: Summary, Gaps, and Recommendations

This report summarizes previous laboratory studies to characterize the performance of methods for collecting, storing/transporting, processing, and analyzing samples from surfaces contaminated by Bacillus anthracis or related surrogates. The focus is on plate culture and count estimates of surface contamination for swab, wipe, and vacuum samples of porous and nonporous surfaces. Summaries of the previous studies and their results were assessed to identify gaps in information needed as inputs to calculate key parameters critical to risk management in biothreat incidents. One key parameter is the number of samples needed to make characterization or clearance decisions with specified statistical confidence. Other key parameters include the ability to calculate, following contamination incidents, the (1) estimates of Bacillus anthracis contamination, as well as the bias and uncertainties in the estimates, and (2) confidence in characterization and clearance decisions for contaminated or decontaminated buildings. Gaps in knowledge and understanding identified during the summary of the studies are discussed and recommendations are given for future studies.

59 BASIC BIOLOGICAL SCIENCES↗

Big-Data-Driven Geo-Spatiotemporal Correlation Analysis between Precursor Pollen and Influenza and its Implication to Novel Coronavirus Outbreak

Although studies of many respiratory viruses and pollens are often framed by both seasonal and health related perspectives, pollen has yet to be extensively examined as an important covariate to seasonal respiratory viruses (SRVs) in any context, including a causal one. This study contributes to those goals through an investigation of SRVs and pollen counts at selected regions across the Western Hemisphere. Two complementary decadal-scaled geospatial profiles were developed. One laterally spanned the US and was anchored by detailed pollen information for Albuquerque, New Mexico. The other straddled the equator to include Fortaleza, Brazil. We found that the geospatial and climatological patterns of pollen advancement and decline across the US every year presented a statistically significant correlation to the subsequent emergence and decline of SRVs. Other significant covariates included winds, temperatures, and atmospheric moisture. Our study indicates that areas of the US with lower geostrophic wind baselines are typically areas of persistently higher and earlier influenza like illness (ILI) cases. In addition to that continental- scaled contrast, many sites indicated seasonal highs of geostrophic winds and ILI which were closely aligned. These observations suggest extensive scale-dependent connectivity of viruses to geostrophic circulation. Pollen emergence and its own scale-dependent circulation may contribute to the geospatial and seasonal patterns of ILI. We explore some uncertainties associated with this investigation, and consider the possibility that in a temperate climate, following a Spring pollen emergence, a resulting increase in pollen triggered human Immunoglobulin E (IgE) antibodies may suppress ILIs for several months.

59 BASIC BIOLOGICAL SCIENCES↗

Optimal Matched Filter in the Low-number Count Poisson Noise Regime and Implications for X-Ray Source Detection

Detection of templates (e.g., sources) embedded in low-number count Poisson noise is a common problem in astrophysics. Examples include source detection in X-ray images, γ-rays, UV, neutrinos, and search for clusters of galaxies and stellar streams. However, the solutions in the X-ray-related literature are sub-optimal in some cases by considerable factors. Using the lemma of Neyman–Pearson, we derive the optimal statistics for template detection in the presence of Poisson noise. We demonstrate that, for known template shape (e.g., point sources), this method provides higher completeness, for a fixed false-alarm probability value, compared with filtering the image with the point-spread function (PSF). In turn, we find that filtering by the PSF is better than filtering the image using the Mexican-hat wavelet (used by wavdetect). For some background levels, our method improves the sensitivity of source detection by more than a factor of two over the popular Mexican-hat wavelet filtering. This filtering technique can also be used for fast PSF photometry and flare detection; it is efficient and straightforward to implement. We provide an implementation in MATLAB. The development of a complete code that works on real data, including the complexities of background subtraction and PSF variations, is deferred for future publication.

79 ASTRONOMY AND ASTROPHYSICS↗

The Importance of Secondary Halos for Strong Lensing in Massive Galaxy Clusters across Redshift

Cosmological cluster-scale strong gravitational lensing probes the mass distribution of the dense cores of massive dark matter halos and the structures along the line of sight from background sources to the observer. It is frequently assumed that the primary lens mass dominates the lensing, with the contribution of secondary masses along the line of sight being neglected. Secondary mass structures may, however, affect both the detectability of strong lensing in a given survey and modify the properties of the lensing that is detected. This paper focuses on the former. Herein we utilize a large cosmological N-body simulation and a multiple lens plane (and many-source plane) ray-tracing technique to quantify the influence of line-of-sight structures on the detectability of cluster-scale strong lensing in a cluster sample with a mass limit that encompasses current cluster catalogs from the South Pole Telescope. We extract both primary and secondary halos from the “Outer Rim” simulation and consider two strong lensing realizations—one with only the primary halos included, and the other with the full mass light cone for each primary halo, including all secondary halos down to a mass limit more than an order of magnitude smaller than the smallest primary halos considered. In both cases, we use the same source information extracted from the Hubble Ultra Deep Field, and create realistic lensed images consistent with moderately deep ground-based imaging; the statistics of the observed strong lensing are extracted from these simulated images. The results demonstrate that down to the mass limit considered the total number of lenses is boosted by ~13%–21% when considering the complete multi-halo light cone; the enhancement is insensitive to different length-to-width cuts applied to the lensed arcs. The increment in strong lens counts peaks at lens redshifts of $z$ ~ 0.6 with no significant effect at $z$ < 0.3. The strongest trends are observed relative to the primary halo mass, with no significant effect in the most massive quintile of the halo sample, but increasingly boosting the observed lens counts toward small primary halo masses, with an enhancement greater than 50% in the least massive quintile of the halo masses considered.

59 BASIC BIOLOGICAL SCIENCES↗

The evolution of weak radio galaxies at radio and optical wavelengths

The statistical properties of radio sources are reviewed. The linear sizes of gE radio galaxies increase mildly with radio power, and decrease drastically with redshift. Combined with the redshift distribution, this causes angular sizes to decrease continuously towards fainter fluxes. Nonetheless, the fraction of large sources is not negligible at any flux level, requiring a revision of the resolution correction to the source counts. The 1.4 GHz counts are now well established (within 5 percent) from 10,575 sources in 24 different surveys. This makes it possible to study fied-to-field anisotropies. None are found in the wide area surveys for S(1.4) greater than 10 mJy, and only marginal anisotropies in some small-area surveys. These are compared to the redshift distribution and the angular correlation function of radio sources.

Windhorst, Rogier↗

Solid-state Image Sensor with Focal-plane Digital Photon-counting Pixel Array

A solid-state focal-plane imaging system comprises an NxN array of high gain. low-noise unit cells. each unit cell being connected to a different one of photovoltaic detector diodes, one for each unit cell, interspersed in the array for ultra low level image detection and a plurality of digital counters coupled to the outputs of the unit cell by a multiplexer(either a separate counter for each unit cell or a row of N of counters time shared with N rows of digital counters). Each unit cell includes two self-biasing cascode amplifiers in cascade for a high charge-to-voltage conversion gain (greater than 1mV/e(-)) and an electronic switch to reset input capacitance to a reference potential in order to be able to discriminate detection of an incident photon by the photoelectron (e(-))generated in the detector diode at the input of the first cascode amplifier in order to count incident photons individually in a digital counter connected to the output of the second cascade amplifier. Reseting the input capacitance and initiating self-biasing of the amplifiers occurs every clock cycle of an integratng period to enable ultralow light level image detection by the may of photovoltaic detector diodes under such ultralow light level conditions that the photon flux will statistically provide only a single photon at a time incident on anyone detector diode during any clock cycle.

Fossum, Eric R.↗

Simulation tool for optical design of PET detector modules including scintillator material and sensor array

The appearance of single photon avalanche diodes (SPADs) in the field of PET detector modules made it necessary to apply more complex optical design methods to refine the performance of such assemblies. We developed a combined simulation tool that is capable to model complex detector structures including scintillation material, light guide, light collection optics and sensor, correctly taking into account the statistical behavior of emission of scintillation light and its absorbance in SPADs. As a validation we compared simulation results obtained by our software and another optical design program. Calculations were performed for a simple PET detector arrangement used for testing purposes. According to the results, deviation of center of gravity coordinates between the two simulations is 0.0195 mm, the average ratio of total counts 1.0052. We investigated the error resulting from finite sampling in wavelength space and we found that 20 nm pitch is sufficient for the simulation in case of the given spectral dependencies. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimum Receiver Structure for PPM Signals with Avalanche Photodiode Statistics

The maximum likelihood decision statistic for detection of pulse-position modulated signals with an avalanche photodiode is derived, using the more accurate Webb density rather than Poisson or Gaussian approximations for the distribution of avalanche photodiode output electrons. It is shown that for Webb-distributed output electtrons, the maximum likelihood rule is to choose the PPM word corresponding to the slot with the maximum electron count.

avalanche photodiode PPM Gaussian Poisson↗