Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

4D-STEM of Beam-Sensitive Materials

We report that a scanning electron nanobeam diffraction, or 4D-STEM (four-dimensional scanning transmission electron microscopy), is a flexible and powerful approach to elucidate structure from "soft" materials that are challenging to image in the transmission electron microscope because their structure is easily damaged by the electron beam. In a 4D-STEM experiment, a converged electron beam is scanned across the sample, and a pixelated camera records a diffraction pattern at each scan position. This four-dimensional data set can be mined for various analyses, producing maps of local crystal orientation, structural distortions, crystallinity, or different structural classes. Holding the sample at cryogenic temperatures minimizes diffusion of radicals and the resulting damage and disorder caused by the electron beam. The total fluence of incident electrons can easily be controlled during 4D-STEM experiments by careful use of the beam blanker, steering of the localized electron dose, and by minimizing the fluence in the convergent beam thus minimizing beam damage. This technique can be applied to both organic and inorganic materials that are known to be beam-sensitive; they can be highly crystalline, semicrystalline, mixed phase, or amorphous. One common example is the case for many organic materials that have a π-π stacking of polymer chains or rings on the order of 3.4-4.2 Å separation. If these chains or rings are aligned in some regions, they will produce distinct diffraction spots (as would other crystalline spacings in this range), though they may be weak or diffuse for disordered or weakly scattering materials. We can reconstruct the orientation of the π-π stacking, the degree of π-π stacking in the sample, and the domain size of the aligned regions. This Account summarizes illumination conditions and experimental parameters for 4D-STEM experiments with the goal of producing images of structural features for materials that are beam-sensitive. We will discuss experimental parameters including sample cooling, probe size and shape, fluence, and cameras. 4D-STEM has been applied to a variety of materials, not only as an advanced technique for model systems, but as a technique for the beginning microscopist to answer materials science questions. It is noteworthy that the experimental data acquisition does not require an aberration-corrected TEM but can be produced on a variety of instruments with the right attention to experimental parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking fault induced tunnel barrier in platelet graphite nanofiber

A correlation study using image inspection and electrical characterization of platelet graphite nanofiber devices is conducted. Close transmission electron microscopy and diffraction pattern inspection reveal layers with inflection angles appearing in otherwise perfectly stacked graphene platelets, separating nanofibers into two domains. Electrical measurement gives a stability diagram consisting of alternating small-large Coulomb blockade diamonds, suggesting that there are two charging islands coupled together through a tunnel junction. Based on these two findings, we propose that a stacking fault can behave as a tunnel barrier for conducting electrons and is responsible for the observed double-island single electron transistor characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective deposition of a crystalline Si film by a chemical sputtering process in a high pressure hydrogen plasma

The selective deposition of Si films was demonstrated using a chemical sputtering process induced by a high pressure hydrogen plasma at 52.6 kPa (400 Torr). In this chemical sputtering process, the initial deposition rate (R{sub d}) is dependent upon the substrate type. At the initial stage of Si film formation, R{sub d} on glass substrates increased with elapsed time and reached to a constant value. In contrast, R{sub d} on Si substrates remained constant during the deposition. The selective deposition of Si films can be achieved by adjusting the substrate temperature (T{sub sub}) and hydrogen concentration (C{sub H2}) in the process atmosphere. For any given deposition time, it was found that an optimum C{sub H2} exists for a given T{sub sub} to realize the selective deposition of a Si film, and the optimum T{sub sub} value tends to increase with decreasing C{sub H2}. According to electron diffraction patterns obtained from the samples, the selectively prepared Si films showed epitaxial-like growth, although the Si films contained many defects. It was revealed by Raman scattering spectroscopy that some of the defects in the Si films were platelet defects induced by excess hydrogen incorporated during Si film formation. Raman spectrum also suggested that Si related radicals (SiH{sub 2}, SiH, Si) with high reactivity contribute to the Si film formation. Simple model was derived as the guideline for achieving the selective growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Projective imaging of high-energy nuclei via coherent exclusive vector meson production in electron-nucleus collisions

One of the major goals of modern nuclear experiments is to study the distributions of gluons inside nuclei at high energy. A key measurement is the coherent exclusive vector meson (VM) production in diffractive electron-nucleus collisions, where the gluon spatial distribution inside the nucleus can be obtained through a Fourier transform of the squared nuclear momentum transfer (|t|) distribution. This research aims to overcome the two main obstacles of the |t| measurement: limited precision in measuring |t| arising from the momentum resolution of the outgoing electron and the overwhelming incoherent background. We demonstrate that by measuring the projected |t| distribution along the direction perpendicular to the electron scattering plane, the effect of the outgoing electron’s momentum resolution can be effectively mitigated, and the diffractive pattern is largely restored. Furthermore, we propose to measure the angular distribution of the VM’s decay daughters to statistically remove the incoherent background.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthesis, Structural and Electrical properties of Bi{sub 4}Ti{sub 3}O{sub 12} and Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} Ferroelectric ceramics

Polycrystalline ceramic samples of Bi{sub 4}Ti{sub 3}O{sub 12} and the La-doped Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on the structure of Bi{sub 4}Ti{sub 3}O{sub 12} powders was investigated by X-ray diffraction. A better agreement between the observed and calculated X-Ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non centrosymmetric space group Fmmm. Rietveld analysis revealed that with the partial substitution of La on the Bi site increases the a and b lattice parameters and decreases the c parameter. The activation energies calculated from dc conductivities are 1.033 eV and 2.244 eV which shows that La doping increases the resistivity of the material useful for dielectric devices.

36 MATERIALS SCIENCE↗

Application of transmission electron microscopy for microstructural characterization of perfluoropentacene thin films

The crystalline structure and orientation of perfluoropentacene (C{sub 22}F{sub 14}, PFP) fibers formed upon thin-film deposition onto SiO{sub 2} substrates have been studied by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and x-ray diffraction. The synopsis of TEM micrographs and diffraction patterns enhances the understanding of local crystal orientation on small length scales. The relationship of the PFP fiber morphology with the crystalline arrangement of PFP molecules within single fibers was established using this technique. Radiation damage, which is a critical problem for TEM investigations of organic materials, is described and the sample morphology after TEM investigations is correlated with AFM measurements of samples previously examined by TEM.

36 MATERIALS SCIENCE↗

Comparison of the Wymark CO2 Reservoir with the Midale Beds at the Weyburn CO2 Injection Project

The Devonian carbonates of the Duperow Formation on the western flank of the Williston Basin in southwest Saskatchewan contain natural accumulations of CO{sub 2}, and may have done so for as long as 50 m.y. in the views of some investigations. These carbonate sediments are characterized by a succession of carbonate cycles capped by anhydrite-rich evaporites that are thought to act as seals to fluid migration. The Weyburn CO{sub 2} injection site lies 400 km to the east in a series of Mississippian carbonates that were deposited in a similar depositional environment. That natural CO{sub 2} can be stored long-term within carbonate strata has motivated the investigation of the Duperow rocks as a potential natural analogue to storage of anthropogenic CO{sub 2} that may ultimately provide additional confidence for CO{sub 2} sequestration in carbonate lithologies. For the Duperow strata to represent a legitimate analog for Midale injection and storage, the similarity in lithofacies, whole rock compositions, mineral compositions and porosity with the Midale Beds must be established. Previous workers have demonstrated the similarity of the lithofacies at both sites. Here we compare the whole rock compositions, mineralogy and mineral compositions. The major mineral phases at both locales are calcite, dolomite and anhydrite. In addition, accessory pyrite, fluorite and celestine are also observed. The distribution of porosity in the Midale Vuggy units is virtually identical to that of the Duperow Formation, but the Marly units of the Midale have significantly higher porosity. The Duperow Formation is topped by the Dinesmore evaporite that is particularly rich in anhydrite, and often contains authigenic K-feldspar. The chemistry of dolomite and calcite from the two localities also overlaps. Silicate minerals are in low abundance within the analyzed Duperow samples, < 3 wt% on a normative basis, with quartz the only phase identifiable in x-ray diffraction patterns. The Midale Beds contain significantly higher silica/silicate concentrations, but the silicate minerals observed, K-feldspar and quartz, are unlikely to participate in carbonate mineral precipitation due to the absence of alkaline earths. Hence, physical and solution trapping are likely to be the primary trapping mechanisms at both sites. Given the similarity of mineral constituents, whole rock and mineral chemistry, reactive transport models developed for the Weyburn site should also be applicable to the Duperow lithologies.

58 GEOSCIENCES↗

Synthesis, characterization and cation adsorption of p-aminobenzoic acid intercalated on calcium phosphate

Graphical abstract: Scanning electron microscopy photographs of calcium phosphate (a) and intercalated with p-aminobenzoic acid (b). Highlights: ► Calcium phosphate was intercalated with p-aminobenzoic acid. ► Guest molecule contains nitrogen and oxygen atoms from amine and carboxylic groups. ► These basic centers are potentially useful for cation coordination in ethanol solution. ► Crystal morphology of compounds is lamellar, it agrees with expected structural characteristics. -- Abstract: Crystalline lamellar calcium phosphate retained 4-aminobenzoic acid inside its cavity without leaching. The intense infrared bands in the 1033 and 1010 cm{sup −1} interval confirmed the presence of the phosphonate groups attached to the inorganic layer, with sharp and intense peaks in X-ray diffraction patterns, which gave basal distances of 712 and 1578 pm for the original and the intercalated compounds, respectively. Solid-state {sup 31}P nuclear magnetic resonance spectra presented only one peak for the phosphate groups attached to the main inorganic polymeric structure near −2.4 ppm. The adsorption isotherms from ethanol gave the maximum adsorption capacities of 6.44 and 3.34 mmol g{sup −1} for nickel and cobalt, respectively, which stability constant and distribution coefficient followed Co > Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete Strain Mapping of Nanosheets of Tantalum Disulfide

Quasi-two-dimensional (quasi-2D) materials hold promise for future electronics because of their unique band structuresthat result in electronic and mechanical properties sensitive to crystal strains in all three dimensions. Quantifying crystal strain is a prerequisite to correlating it with the performance of the device, and calls for high resolution but spatially resolved rapid characterization methods. Here we show that using fly-scan nano X-ray diffraction we can accomplish a tensile strain sensitivity below 0.001% with a spatial resolution of better than 80 nm over a spatial extent of 100 µm on quasi 2D flakes of 1T-TaS2. Coherent diffraction patterns were collected from a ~100 nm thick sheet of 1T-TaS2 by scanning 12keV focused X-ray beam across and rotating the sample. We demonstrate that the strain distribution around micron and sub-micron sized ‘bubbles’ that are present in the sample may be reconstructed from these images. The experiments use state of the art synchrotron instrumentation, and will allow rapid and non-intrusive strain mapping of thin film samples and electronic devices based on quasi 2D materials.

nano X-ray diffraction↗

Nanocoating of particles for optimal doping and universal enhancement of current-carrying ability in ''organic''MgB{sub 2-x}C{sub x} superconductors

The universal approach of liquid mixing has been found to produce 'organic' MgB{sub 2-x}C{sub x} superconductors with structural and supercurrent-carrying properties unattainable by other techniques. We show by transmission electron microscopy combined with energy dispersive spectroscopy that these unique properties are enabled through coating of boron particles with a nanolayer of carbon. The subsequent reaction between carbon-encapsulated boron and magnesium results in enhanced carbon content x in the crystal lattice, as determined by x-ray diffraction pattern analysis. Among various carbon-containing compounds investigated, polycarbosilane has been found to be the optimal dopant for MgB{sub 2} superconductor, producing the largest critical current density due to the formation of wide range of nanodefects with pinning properties within the MgB{sub 2} crystal lattice, as well as due to minimal formation of current-blocking layers around the grains.

36 MATERIALS SCIENCE↗

Vertical Bridgman growth and characterization of Cd 0.95-x Mn x Zn 0.05 Te (x=0.20, 0.30) single-crystal ingots

Solid-liquid phase transitions in Cd 0.95-x Mn x Zn 0.05 Te alloys with x = 0.20 and 0.30 were investigated by differential thermal analysis (DTA). The heating/cooling rates were 5 and 10 K/min with a melt dwell time of 10, 30 and 60 minutes. Cd 0.95-x Mn x Zn 0.05 Te (x=0.20, 0.30) single-crystal ingots were grown by the vertical Bridgman method guided using the DTA results. Te inclusions (1-20 microns), typical for CdTe and Cd(Zn)Te crystals, were observed in the ingots by infrared transmission microscopy. The measured X-ray diffraction patterns showed that all compositions are found to be in a single phase. Using current-voltage (I-V) measurements, the resistivity of the samples from each ingot was estimated to be about 10 5 Ohm·cm. The optical transmission analysis demonstrated that the band-gap width of the investigated ingots increased from 1.77 to 1.88 eV with the increase of the MnTe content from 20 to 30 mol. %.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Instrumental resolution as a function of scattering angle and wavelength as exemplified for the POWGEN instrument

The method of angular- and wavelength-dispersive (e.g. two-dimensional) Rietveld refinement is a new and emerging tool for the analysis of neutron diffraction data measured at time-of-flight instruments with large area detectors. Following the approach for one-dimensional refinements (using either scattering angle or time of flight), the first step at each beam time cycle is the calibration of the instrument including the determination of instrumental contributions to the peak shape variation to be expected for diffraction patterns measured by the users. The aim of this work is to provide the users with calibration files and – for the later Rietveld refinement of the measured data – with an instrumental resolution file (IRF). This article will elaborate on the necessary steps to generate such an IRF for the angular- and wavelength-dispersive case, exemplified for the POWGEN instrument. A dataset measured on a standard diamond sample is used to extract the profile function in the two-dimensional case. It is found that the variation of reflection width with 2θ and λ can be expressed by the standard equation used for evaluating the instrumental resolution, which yields a substantially more fundamental approach to the parameterization of the instrumental contribution to the peak shape. Geometrical considerations of the POWGEN instrument and sample effects lead to values for Δθ, Δt and ΔL that yield a very good match to the extracted FWHM values. In a final step the refinement results are compared with the one-dimensional, i.e. diffraction-focused, case.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Prominent Study on Surface Properties and Diffusion Coefficient of Urease-Conjugated Magnetite Nanoparticles

Herein, the magnetite nanoparticles (MNs) were prepared by facile solvothermal method and its porous nature was modified using 3-(2-aminoethyl)-3-aminopropyl trimethoxysilane (AEAPS). Magnetite formation, successful amino tagging, and urease conjugation on the surface were confirmed from the presence of certain functional groups in Fourier transform infrared (FT-IR) spectra. Also, nanosize (13.2 nm) and spherical morphology of MNs were evaluated from diffraction patterns and electron micrographs respectively. Lower retentivity and coercivities in magnetization curve revealed the superparamagnetic behavior, and nitrogen adsorption/desorption curves exhibited decrease in its surface porosity. Conductivity measurements showed lower diffusion coefficient (D{sub e} = 1.9 × 10{sup −17} cm{sup 2}/min) and higher diffusion with limited hydrolytic reaction in native urease and improved activity of conjugated urease with higher D{sub e} (12.62 × 10{sup −16} cm{sup 2}/min). Hence, this study revealed that the surface porous nature of MNs can be altered effectively by amino tagging in order to overcome diffusional limitations thereby enhancing enzyme activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoscale oxygen octahedral tilting in 0.90(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-0.05(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-0.05BaTiO{sub 3} lead-free perovskite piezoelectric ceramics

The oxygen octahedral tilted domains in 0.90(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-0.5(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-0.5BaTiO{sub 3} lead-free perovskite piezoelectric ceramic have been studied by transmission electron microscopy (TEM). Selected-area electron diffraction patterns shows the (1/2)ooo and (1/2)ooe reflections, indicating the presence of antiphase (a{sup -}a{sup -}a{sup -}) and in-phase (a{sup o}a{sup o}c{sup +}) octahedral tilting, respectively. The morphology and distributions of these tilted domains are shown in the centered dark-field images. Further, the Bragg-filtered high-resolution TEM image reveals that the size of the in-phase tilted domains varies from 1 to 8 nm across. The ceramic contains the mixture of nontilted and variants of the antiphase and in-phase tilted domains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of cooling rate on the precipitation behavior in Ti–Nb–Mo microalloyed steels during continuous cooling and relationship to strength

In this study we elucidate carbide precipitation at varied cooling rates in Ti–Nb–Mo microalloyed steels during continuous cooling. The study suggests that increasing the cooling rate prevents precipitate formation in the ferrite phase during continuous cooling after finish rolling at 850 °C. At a lower cooling rate of 0.5 °C/s, the microhardness of ferrite grains exhibited maxima because of high volume fraction of fine carbides. A high density of nanoscale carbides with similar precipitation characteristics, including interphase precipitates, was observed at cooling rates of 0.5 and 1 °C/s, but the carbides were marginally larger and the spacing between them was increased with cooling rate. Additionally, carbide precipitation at a high cooling rate was associated with strain-induced precipitation. Through the analysis of selection area electron diffraction patterns and high-resolution transmission electron microscopy, lattice imaging, the fine spherical-shaped carbides of size ~ 6–10 nm were identified as MC-type carbides of the type (Ti,Nb,Mo)C and NbC. - Highlights: • We model three cooling rates which have indicated different precipitation behaviors. • We find two types of precipitates including NbC and (Ti,Nb,Mo)C based on HRTEM study. • Increasing cooling rate will decrease volume fraction and size of the precipitates. • There is no absence of interphase precipitation when the cooling rate increases to 5 °C/s.

36 MATERIALS SCIENCE↗

Moessbauer spectroscopy studies of carbon-encapsulated magnetic nanoparticles obtained by different routes

Carbon-encapsulated magnetic nanoparticles (CEMNPs) are nanomaterials with a core-shell structure. Their intrinsic properties result both from the unique nature of the encapsulated magnetic phases and the high chemical stability of the external carbon shells. CEMNPs may find many prospective applications, e.g., in magnetic data storage, catalysis, xerography, magnetic resonance imaging, and in biomedical applications. Herein, we present detailed structural studies of such nanostructures by Moessbauer spectroscopy, x-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy. CEMNPs have been obtained by three different techniques: carbon arc, combustion synthesis, and radio frequency thermal plasma. The evaluation of the phase composition of the products was strongly limited due to the broadening and overlapping of the lines in XRD diffraction patterns. The presence of the semicrystalline phases, which could not been identified by XRD, was established by Moessbauer spectroscopy. Furthermore, the magnetic core phase composition was evaluated quantitatively. The products were purified before structural analyses to remove the nonencapsulated particles. The purification caused significant changes in the mass and the saturation magnetization. The Moessbauer spectra of the purified products were compared with the literature data concerning the as-produced CEMNPs.

36 MATERIALS SCIENCE↗

Structural analysis, optical and dielectric function of [Ba{sub 0.9}Ca{sub 0.1}](Ti{sub 0.9}Zr{sub 0.1})O{sub 3} nanocrystals

This work presents the identification of inter-band transitions in the imaginary part of the dielectric function (ε{sub 2}) derived from the Kramers–Kronig analysis for [Ba{sub 0.9}Ca{sub 0.1}](Ti{sub 0.9}Zr{sub 0.1})O{sub 3} (BCZT) nanocrystals synthesized by the modified Pechini method. The analysis started with the chemical identification of the atoms that conform BCZT in the valence loss energy region of a high energy-resolution of electron energy loss spectroscopy. The indirect band energy (E{sub g}) was determined in the dielectric response function. This result is in agreement with the UV-Vis technique, and it obtained an optical band gap of 3.16 eV. The surface and volume plasmon peaks were observed at 13.1 eV and 26.2 eV, respectively. The X-ray diffraction pattern and the Rietveld refinement data of powders heat treated at 700 °C for 1 h suggest a tetragonal structure with a space group (P4 mm) with the average crystal size of 35 nm. The average particle size was determined by transmission electron microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗