Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discovery Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

The interactions of atmospheric cosmogenic radionuclides with spacecraft surfaces

The discovery of the cosmogenic radionuclide Be-7 on the front surface (and the front surface only) of the Long Duration Exposure Facility (LDEF) spacecraft has opened opportunities to investigate new phenomena in several disciplines of space science. The experiments performed for this work show that the Be-7 results only if the source of the isotope is the atmosphere through which the spacecraft passed. We should expect that the uptake of beryllium in such circumstances will depend on the chemical form of the Be and the chemical nature of the substrate. It was found that the observed concentration of Be-7 does, in fact, differ between metal surfaces and organic surfaces such as PTFE (teflon). It is noted, however, that: (1) organic surfaces, even PTFE, are etched by the atomic oxygen found under these orbital conditions, and (2) the relative velocity of the species is 8 km(exp -1)s relative to the surface and the interaction chemistry and physics may differ from the norm. The Be-7 is formed by spallation of O and N nuclei under cosmic ray proton bombardment. The principal source region is at altitudes of 12-15 km. While very small quantities are produced above 300 km, the amount measured on the LDEF was 3 to 4 orders of magnitude higher than expected from production at orbital attitude. The most reasonable explanation is that Be-7 is rapidly transported from low altitudes by some unknown mechanism. The process must take place on a time scale similar to the half-life of the isotope (53 days). Many other isotopes are produced by cosmic ray reactions, and some of these are suited to measurement by the extremely sensitive methods of accelerator mass spectrometry. A program was initiated to search for these isotopes and it is hoped that such studies will provide new methods for studying mixing in the upper atmosphere.

Gregory, John C.↗

The Mars Reconnaissance Orbiter Mission: 2018 Status

The Mars Reconnaissance Orbiter (MRO) continues its dual-mode mission of scientific exploration and programmatic support. Now in its 13th year of flight (and its 12th year in its low-altitude, sun-synchronous orbit around Mars), the spacecraft continues in its normal flight mode and its science instruments continue to acquire a treasure trove of data which is being used to study the Martian environment (surface, sub-surface, and atmosphere). To date (July 2018), more than 333 TB of scientific data have been returned to Earth. Building onto the 2017 IAC paper: “The Mars Reconnaissance Orbiter Mission: Continuing a Record of Exploration from Mars Orbit,” [1] this paper provides a 2018 status update on the MRO Mission. A signature event since the 2017 writing is the onset and evolution of a planet-encircling dust event (PEDE), the first such event since 2007. Additional recent science highlights for MRO include the discovery of mid-latitude ice cliffs, polar cap characterization, daily global mapping of the 2018 PEDE dust activity and the atmospheric thermal response, further characterization of the tantalizing recurring slope lineae (RSL), and continued detection of surface changes. Programmatically, UHF relay support for the Mars Science Laboratory (MSL) rover Curiosity and the Mars Exploration Rover (MER) rover Opportunity continues at a pace that provides the engineers and scientists operating those surface vehicles timely information to support their mission planning and science analysis. Most of the landing site characterization requests for the NASA Mars 2020 rover and the ESA ExoMars Rover/Surface Platform (RSP) missions have been completed, with final acquisitions delayed due to the obscuring dust haze from the current PEDE. In parallel, the flight team has faced new engineering challenges as the spacecraft has aged. The team has developed and is implementing actions that are aimed at stretching spacecraft battery life. A new all-stellar capability using the spacecraft’s star trackers now allows for normal spacecraft operations without IMUs. In addition to its current relay duties, MRO will be synchronized to provide critical communications support for the InSight Entry, Descent, and Landing (EDL) event on November 26, 2018, and will be readied to support InSight’s critical commissioning phase with UHF relay support and environmental characterization. A new split-pass relay capability has been developed which will allow MRO to relay with two surface vehicles in “close proximity” on the same overflight, i.e. the InSight lander and the Curiosity rover. Extended for another year of operations by NASA, this paper will highlight recent scientific progress and describe actions that will extend MRO’s life well into the 2020’s as a key element of the Mars Exploration Program.

Zurek, Richard W.↗

Spaceflight Biospecimen and Data Sharing in Support of Science Discovery and Exploration

For decades, NASA and international partners have conducted biological experiments in space to understand effects of spaceflight and address potential hazards. To enable spaceflight back to the Moon, and then to Mars and beyond, it is imperative to further understand basic science and health risks associated with spaceflight, along with developing countermeasures. The sending of experiments and organisms into space is a costly endeavor. To maximize scientific return, sharing with the scientific community both space-flown biospecimens and data from completed experiments is essential. New fundamental, applied, and bioinformatic science insights can be gained from specimen and data sharing efforts. Data reuse enables spaceflight health risk modeling, analyzing adverse outcomes across spaceflight hazards, and deep space autonomous support for the flight medical officer. Space-flown biospecimens not required by mission Principal Investigators are regularly archived and made available for scientific request. The largest biorepository of these samples are found within NASA’s Institutional Scientific Collection at Ames Research Center (ISC-ARC), which stores over 32,000 specimens mostly from Shuttle and International Space Station (ISS) missions, but also some ground-based analog samples. The Ames Life Sciences Data Archive manages the ISC-ARC. Tissues are predominantly from mice and rats, though samples are also available from bacteria and quail. Only a handful of other similar collections exist worldwide. Rodent biospecimens exposed to simulated space radiation at Brookhaven National Laboratory are archived under the purview of NASA HRP Space Radiation Element. Microbial collection and analyses from 20 years of routine environmental monitoring of air, surfaces, and water systems of the ISS were performed to ensure a safe environment for astronauts. Samples from the ISC-ARC, space radiation and microbial collections are searchable and requestable through the NASA Life Sciences Data Archive (LSDA). Decades of planetary protection microbial isolates derived from spacecraft bioburden are archived in JPL’s microbial collection. Rodent biospecimens from spaceflight investigations conducted by the Japan Aerospace Exploration Agency (JAXA) are archived and available at the JAXA Biorepository at Tsukuba Space Center. The Russian Institute of Biomedical Problems also has a collection of animal, microbial, cellular, and fungi available for research from ground analog experiments. Several data repositories exist for scientists to utilize. The LSDA is the primary NASA source of life sciences research data and information. It contains decades of spaceflight and ground-analog research involving human, microbial, cellular, plant, and animal subjects. Data is collected from NASA-funded investigations through the Human Research Program and the Space Biology Program. The NASA Lifetime Surveillance of Astronaut Health collects and grants access to clinical and occupational health monitoring data from astronauts, with a list and description of data collected available for request through the LSDA. NASA GeneLab at ARC collects genomic, transcriptomic, proteomic, and metabolomic data from any species. It is a repository and platform for collaborative open-science bioinformatic approaches. JAXA is establishing an ‘omics-based repository in collaboration with the Tohoku Medical Megabank (ToMMo), called the JAXA-ToMMo Integrated Biobank for Space Life Science. Overall, the sharing of these biospecimen and data resources can assist researchers worldwide in understanding spaceflight effects on biology, along with enabling next generation data science applications for space exploration platforms. Websites: https://lsda.jsc.nasa.gov/ ; https://www.nasa.gov/ames/research/space-biosciences/isc-bsp ; https://www.nasa.gov/ames/research/space-biosciences/alsda

Ryan T. Scott↗

Characterizing and testing a thermally isolating superconducting link for SAFIRE-like missions

The discovery of a new class of ceramic superconductors with transition temperatures above the boiling point of liquid nitrogen has opened the doors for several space applications. One important space application is the fabrication of an electrically conducting and thermally isolating link to replace manganin wires used in connecting IR detectors to data acquisition electronics on remote sensing platforms like SAFIRE and SIRTF. These NASA platforms designed to monitor the earth's atmosphere from space use infrared detectors which operate at liquid helium temperature (4.2K) for optimum performance. The SAFIRE mission employs hybrid dewars which combine both mechanical and cryogenic liquid cooling. The lifetime of such a mission is limited by the heat conducted through sensor array leads that connect the electronics (at approximately 80 K) to the sensors (at approximately 4 K). Currently these remoter sensing systems use manganin wires to connect the IR detectors to the data acquisition electronics. This link between a detector operating at 4 K and electronics operating at 80 K must be made of material that has high electrical conductivity and high thermal resistance. The YBCO superconductor with a transition temperature, Tc, of 93 K can achieve these conflicting requirements. A link with these characteristics will improve the thermal isolation of IR detectors and will increase the lifetime of the cryogen. The fabrication of an electrically conducting and thermally isolating link that replaces the manganin wires is an important application that will improve thermal isolation of IR detectors and will increase the lifetime of the cryogen. The link is made by screen printing superconducting lines on a low thermal conductivity ceramic substrate. Developing, modeling, and testing this high temperature superconducting link is a collaborative effort among NASA-Langley Research Center, Christopher Newport University (CNU), Clemson University and the industrial companies that have joined the Commercialization of Space Program for the purpose of developing and testing this link. CNU's effort in the development of this superconducting link included the following major efforts: (1) Development of a thermal conductivity measurement system for high temperature superconductors and ceramic materials which are potential candidates for use as substrates in this link. (2) Development of a mathematical model for the superconducting link that studies the effect of materials and geometry on the heat load and life time of missions. (3) Characterization of high Tc materials and assemblies made for space applications. Properties studied include humidity effects and aging effects on high Tc materials. This report summarizes the results of the research studies that were completed. Copies of publications detailing these findings are attached to this report.

Selim, Raouf R.↗

The Future of NASA Earth Science in the Commercial Cloud: Challenges and Opportunities

NASA produces a large volume and variety of data products that are used every day to support research, decision making, and education. The widespread use of NASA’s Earth Science data is enabled by NASA’s Earth Science Data System (ESDS) program, which oversees the archiving and distribution of these data and invests in the development of new data systems and tools. However, NASA’s current approach to Earth Science data distribution — based on distributed institutional archives with individual on-premises high-performance computing capabilities — faces some significant challenges, including massive increases in data volume from upcoming missions, a greater need for transdisciplinary science that synthesizes many different kinds of observations, and a push to make science more open, inclusive, and accessible. To address these challenges, NASA is aggressively migrating its Earth Science data and related tools and services into the commercial cloud. Migration of data into the commercial cloud can significantly improve NASA’s existing data system capabilities by (1) providing more flexible options for storage and compute (including rapid, as-needed access to state-of-the-art capabilities); (2) by centralizing and standardizing data access, which gives all of NASA’s institutional data centers access to all of each other’s datasets; and (3) by facilitating “analysis-in-place”, whereby users can bring their own computational workflows and tools to the data rather than having to maintain their own copies of NASA datasets. However, migration to the commercial cloud also poses some significant challenges, including (1) managing costs under a “pay-as-you-go” model; (2) incompatibility with existing tools and data formats with object-based storage and network access; (3) vendor lock-in; (4) challenges with data access for workflows that mix on-premise and cloud computing; and (5) standardization for highly diverse data as is present in NASA’s data archive. I conclude with two examples of recent NASA activities showcasing capabilities enabled by the commercial cloud: An interactive analysis and development platform for analyzing airborne imaging spectroscopy data, and a new collection of tools and services for data discovery, analysis, publication, and data-driven storytelling (Visualization, Exploration, and Data Analysis, VEDA).

Alexey N Shiklomanov↗

Viral carcinogenesis: revelation of molecular mechanisms and etiology of human disease

The RNA and DNA tumor viruses have made fundamental contributions to two major areas of cancer research. Viruses were vital, first, to the discovery and analysis of cellular growth control pathways and the synthesis of current concepts of cancer biology and, second, to the recognition of the etiology of some human cancers. Transforming retroviruses carry oncogenes derived from cellular genes that are involved in mitogenic signalling and growth control. DNA tumor viruses encode oncogenes of viral origin that are essential for viral replication and cell transformation; viral oncoproteins complex with cellular proteins to stimulate cell cycle progression and led to the discovery of tumor suppressors. Viral systems support the concept that cancer development occurs by the accumulation of multiple cooperating events. Viruses are now accepted as bona fide etiologic factors of human cancer; these include hepatitis B virus, Epstein-Barr virus, human papillomaviruses, human T-cell leukemia virus type I and hepatitis C virus, plus several candidate human cancer viruses. It is estimated that 15% of all human tumors worldwide are caused by viruses. The infectious nature of viruses distinguishes them from all other cancer-causing factors; tumor viruses establish long-term persistent infections in humans, with cancer an accidental side effect of viral replication strategies. Viruses are usually not complete carcinogens, and the known human cancer viruses display different roles in transformation. Many years may pass between initial infection and tumor appearance and most infected individuals do not develop cancer, although immunocompromised individuals are at elevated risk of viral-associated cancers. Variable factors that influence viral carcinogenesis are reviewed, including possible synergy between viruses and environmental cofactors. The difficulties in establishing an etiologic role for a virus in human cancer are discussed, as well as the different approaches that proved viral links to cancer. Future directions for tumor virus studies are considered.

NASA Program Biomedical Research and Countermeasur↗

An Overview of the Mars Reconnaissance Orbiter (MRO) Science Mission

The Mars Reconnaissance Orbiter (MRO) is the latest addition to the suite of missions on or orbiting Mars as part of the NASA Mars Exploration Program. Launched on 12 August 2005, the orbiter successfully entered Mars orbit on 10 March 2006 and finished aerobraking on 30 August 2006. Now in its near-polar, near-circular, low-altitude (approximately 300 km), 3 p.m. orbit, the spacecraft is operating its payload of six scientific instruments throughout a one-Mars-year Primary Science Phase (PSP) of global mapping, regional survey, and targeted observations. Eight scientific investigations were chosen for MRO, two of which use either the spacecraft accelerometers or tracking of the spacecraft telecom signal to acquire data needed for analysis. Six instruments, including three imaging systems, a visible-near infrared spectrometer, a shallow-probing subsurface radar, and a thermal-infrared profiler, were selected to complement and extend the capabilities of current working spacecraft at Mars. Whether observing the atmosphere, surface, or subsurface, the MRO instruments are designed to achieve significantly higher resolution while maintaining coverage comparable to the current best observations. The requirements to return higher-resolution data, to target routinely from a low-altitude orbit, and to operate a complex suite of instruments were major challenges successfully met in the design and build of the spacecraft, as well as by the mission design. Calibration activities during the seven-month cruise to Mars and limited payload operations during a three-day checkout prior to the start of aerobraking demonstrated, where possible, that the spacecraft and payload still had the functions critical to the science mission. Two critical events, the deployment of the SHARAD radar antenna and the opening of the CRISM telescope cover, were successfully accomplished in September 2006. Normal data collection began 7 November 2006 after solar conjunction. As part of its science mission, MRO will also aid identification and characterization of the most promising sites for future landed missions, both in terms of safety and in terms of the scientific potential for future discovery. Ultimately, MRO data will advance our understanding of how Mars has evolved and by which processes that change occurs, all within a framework of identifying the presence, extent, and role of water in shaping the planet s climate over time.

astronomical instruments↗

HRP's Healthcare Spin-Offs Through Computational Modeling and Simulation Practice Methodologies

Spaceflight missions expose astronauts to novel operational and environmental conditions that pose health risks that are currently not well understood, and perhaps unanticipated. Furthermore, given the limited number of humans that have flown in long duration missions and beyond low Earth-orbit, the amount of research and clinical data necessary to predict and mitigate these health and performance risks are limited. Consequently, NASA's Human Research Program (HRP) conducts research and develops advanced methods and tools to predict, assess, and mitigate potential hazards to the health of astronauts. In this light, NASA has explored the possibility of leveraging computational modeling since the 1970s as a means to elucidate the physiologic risks of spaceflight and develop countermeasures. Since that time, substantial progress has been realized in this arena through a number of HRP funded activates such as the Digital Astronaut Project (DAP) and the Integrated Medical Model (IMM). Much of this success can be attributed to HRP's endeavor to establish rigorous verification, validation, and credibility (VV&C) processes that ensure computational models and simulations (M&S) are sufficiently credible to address issues within their intended scope. This presentation summarizes HRP's activities in credibility of modeling and simulation, in particular through its outreach to the community of modeling and simulation practitioners. METHODS: The HRP requires all M&S that can have moderate to high impact on crew health or mission success must be vetted in accordance to NASA Standard for Models and Simulations, NASA-STD-7009 (7009) [5]. As this standard mostly focuses on engineering systems, the IMM and DAP have invested substantial efforts to adapt the processes established in this standard for their application to biological M&S, which is more prevalent in human health and performance (HHP) and space biomedical research and operations [6,7]. These methods have also generated substantial interest by the broader medical community though institutions like the National Institutes of Health (NIH) and the Food and Drug Administration (FDA) to develop similar standards and guidelines applicable to the larger medical operations and research community. DISCUSSION: Similar to NASA, many leading government agencies, health institutions and medical product developers around the world are recognizing the potential of computational M&S to support clinical research and decision making. In this light, substantial investments are being made in computational medicine and notable discoveries are being realized [8]. However, there is a lack of broadly applicable practice guidance for the development and implementation of M&S in clinical care and research in a manner that instills confidence among medical practitioners and biological researchers [9,10]. In this presentation, we will give an overview on how HRP is working with the NIH's Interagency Modeling and Analysis Group (IMAG), the FDA and the American Society of Mechanical Engineers (ASME) to leverage NASA's biomedical VV&C processes to establish a new regulatory standard for Verification and Validation in Computational Modeling of Medical Devices, and Guidelines for Credible Practice of Computational Modeling and Simulation in Healthcare.

Mulugeta, Lealem↗

National Aeronautics and Space Administration. 2003 Strategic Plan

As the 21st century begins to unfold, NASA will focus, with renewed vigor, on the challenges and opportunities before us and on developing the unique capabilities that strengthen America and address our national needs. Our Mission is driven by science, exploration, and discovery, and it will be carried out with a firm commitment to fiscal responsibility. We will study climate change and the natural and human-induced hazards to Earth's ecosystem. We will help to counter the threat of international terrorism by developing technologies that can improve the security and safety of our air transportation system. We will lead the world into a new understanding of our planet, our solar system, and the universe around us, and in so doing, we will begin to understand whether life may have developed elsewhere in the cosmos. This strategic plan lays out our hopes for the future and the important things we seek to accomplish for America. We are privileged to be entrusted with these pursuits and thrilled to be able to carry them out. We invite you to join us on this great adventure. Releasing this strategic plan with our 2004 budget request represents our new commitment to the integration of budget and performance reporting. In this way, we will ensure that strategic priorities are aligned with and influence budget priorities. Our new Integrated Budget and Performance Document, a companion volume to this strategic plan, expands on the goals and objectives presented here and identifies the specific long-term and annual performance measures for which we will be held accountable.

STRATEGIC PLANNING↗

Rodent Habitat on ISS: Advances in Capability for Determining Spaceflight Effects on Mammalian Physiology

Rodent research is a valuable essential tool for advancing biomedical discoveries in life sciences on Earth and in space. The National Research Counsel's Decadal survey (1) emphasized the importance of expanding NASAs life sciences research to perform long duration, rodent experiments on the International Space Station (ISS). To accomplish this objective, new flight hardware, operations, and science capabilities were developed at NASA ARC to support commercial and government-sponsored research. The flight phases of two separate spaceflight missions (Rodent Research-1 and Rodent Research-2) have been completed and new capabilities are in development. The first flight experiments carrying 20 mice were launched on Sept 21, 2014 in an unmanned Dragon Capsule, SpaceX4; Rodent Research-1 was dedicated to achieving both NASA validation and CASIS science objectives, while Rodent Reesearch-2 extended the period on orbit to 60 days. Groundbased control groups (housed in flight hardware or standard cages) were maintained in environmental chambers at Kennedy Space Center. Crewmembers previously trained in animal handling transferred mice from the Transporter into Habitats under simultaneous veterinary supervision by video streaming and were deemed healthy. Health and behavior of all mice on the ISS was monitored by video feed on a daily basis, and post-flight quantitative analyses of behavior were performed. The 10 mice from RR-1 Validation (16wk old, female C57Bl6/J) ambulated freely and actively throughout the Habitat, relying heavily on their forelimbs for locomotion. The first on-orbit dissections of mice were performed successfully, and high quality RNA (RIN values>9) and liver enzyme activities were obtained, validating the quality of sample recovery. Post-flight sample analysis revealed that body weights of FLT animals did not differ from ground controls (GC) housed in the same hardware, or vivarium controls (VIV) housed in standard cages. Organ weights analyzed post-flight showed that there were no differences between FLT and GC groups in adrenal gland and spleen weights, whereas FLT thymus and liver weights exceeded those of GC. Minimal differences between the control groups (GC and VIV) were observed. In addition, Over 3,000 aliquots collected post-flight from the four groups of mice were deposited into the Ames Life Science Data Archives for the Biospecimen Sharing Program and Genelab project. New capabilities recently developed include DEXA scanning, grip strength tests and male mice. In conclusion, new capability for long duration rodent habitation of group-housed rodents was developed and includes in-flight sample collection, thus avoiding the complication of reentry. Results obtained to date reveal the possibility of striking differences between the effects of short duration vs. long duration spaceflight. This Rodent Research system enables achievement of both basic science and translational research objectives to advance human exploration of space.

Bone Loss↗

Cytoplasm-to-myonucleus ratios following microgravity

The cytoplasmic volume-to-myonucleus ratio in the tibialis anterior and gastrocnemius muscles of juvenile rats after 5.4 days of microgravity was studied. Three groups of rats (n = 8 each) were used. The experimental group (space rats) was flown aboard the space shuttle Discovery (NASA, STS-48), while two ground-based groups, one hindlimb suspended (suspended rats), one non-suspended (control), served as controls. Single fibre analysis revealed a significant decrease in cross-sectional area (microns2) in the gastrocnemius for both the space and the suspended rats; in the tibialis anterior only the suspended rats showed a significant decrease. Myonuclei counts (myonuclei per mm) in both the tibialis anterior and gastrocnemius were significantly increased in the space rats but not in the suspended rats. The mean myonuclear volume (individual nuclei: microns3) in tibialis anterior fibres from the space rats, and in gastrocnemius fibres from both the space and the suspended rats, was significantly lower than that in the respective control group. Estimation of the total myonuclear volume (microns3 per.mm), however, revealed no significant differences between the three groups in either the tibialis anterior or gastrocnemius. The described changes in the cross-sectional area and myonuclei numbers resulted in significant decreases in the cytoplasmic volume-to-myonucleus ratio (microns3 x 10(3)) in both muscles and for both space and suspended rats (tibialis anterior; 15.6 +/- 0.6 (space), 17.2 +/- 1.0 (suspended), 20.8 +/- 0.9 (control): gastrocnemius; 13.4 +/- 0.4 (space) and 14.9 +/- 1.1 (suspended) versus 18.1 +/- 1.1 (control)). These results indicate that even short periods of unweighting due to microgravity or limb suspension result in changes in skeletal muscle fibres which lead to significant decreases in the cytoplasmic volume-to-myonucleus ratio.

NASA Discipline Cell Biology↗

Jet Propulsion Laboratory: Annual Report 2008

Nothing is more exciting than when science mines the far end of our knowledge for the new and the unexpected. In 2008, the world was taken by surprise when JPL astronomers announced the discovery of organic compounds on a planet orbiting another star. We were equally excited to learn from the Spitzer Space Telescope that many, if not most, sun-like stars have rocky planets roughly similar to Earth. Together these are very intriguing clues in our quest to learn if there is life elsewhere in the universe, which certainly has to be one of the most profound mysteries of our age.There are times when, dealing with unknowns, we are reminded to be humble. Very impressive progress is being made by the team developing our next flagship mission, Mars Science Laboratory. Ther conclusion, however, is that it would not be safe to try to fly during the Mars launch window in 2009, and reset for the next opportunity in 2011. We are lucky to have valuable assets that support us as we venture into the unknown. One is the global Deep Space Network, which functions both as our communication gateway to our spacecraft across the solar system as well as a research tool itself in conducting radar astronomy. Our successes depend on our entire team, administrators and business specialists as much as technical people. There are those who help share our missions with the public, finding imaginative venues such as sending out dispatches on the Internet's Twitter.com during the Phoenix mission. We also benefit greatly from the intellectual infusion that comes from our unique identity as a division of the California Institute of Technology and a member of the NASA family.

National Aeronautics and Space Administration (NAS↗

Developing Concepts of Operations Using Multi-Step Tool Techniques With Large Language Models

The National Aeronautics and Space Administration (NASA) Air Mobility Pathfinders (AMP) project is developing and evaluating concepts of operations (ConOps) for safe, secure, and scalable Urban Air Mobility (UAM) operations. The AMP project’s Operational Concepts, Architecture, and Requirements Integration (OCARI) Team is using a Model Based System Engineering (MBSE) approach for integration, interoperability, and traceability of Advanced Air Mobility (AAM) ecosystems centered around urban air taxi services. The team’s goal is to define structures and behaviors needed for system feasibility, readiness, and interoperability, establish a UAM knowledge base, and trace and validate assumptions and requirements relevant to AAM. NASA Langley Research Center (LaRC) is spearheading an innovative digital engineering approach to integrate, communicate, and facilitate the research of multi-modal transportation systems. The Knowledge-based Digital Platform (KbDP) is a concept being developed that ties the workflows of Project Managers (PM), Principal Investigators (PI), and System Engineers together across organizational boundaries. It does so through the management of an information database defined by mathematical, data science, and system engineering principles. Machine Learning (ML) algorithms play a key role in this concept by extracting meaningful knowledge from relational and graph databases, document repositories, and system artifacts, which the human user leverages to greatly improve the efficiency and effectiveness of their research. Recent advancements in the field of Large Language Models (LLMs), specifically models trained for tool use, such as Command-R , now allow for the reliable implementation of single-step and multi-step tool-centric systems. These techniques provide the LLM with a set of tools, in our case Python functions, that can be called on to answer a much wider range of questions compared to LLMs implemented using a traditional single-source or Retrieval Augmented Generation (RAG) approach. Through this method, the LLM can pull information from multiple data sources, such as relational or graph databases, document repositories, application programming interfaces (APIs), and SysML artifacts depending on the user’s question. The LLM can also output the information in a variety of different formats, using output generation tools, such as CSV, UML, or SysML artifacts. Additionally, tools can be assigned roles and can work together to provide answers to queries in an “agent” like approach, similar to that implemented by Microsoft’s AutoGen framework where different agents can converse with each other to accomplish tasks. Previously, our team developed a chatbot system with “agent like” functionality in the form of different “modes” the user could select from a user interface (UI), this architecture can be seen on the left in figure 1. Three different modes were implemented, the first mode allowed the LLM to utilize the structures and algorithms within a graph database to trace UAM requirements. The second mode gave the LLM access to a vector search capable of providing relevant information from thousands of document pages related to UAM ConOps and requirements. The third mode served as a general assistant where users could enter open-ended questions and custom prompts to utilize the LLM for different use-cases. This system improved the process surrounding generating and analyzing information related to UAM requirements, however, the implementation provided a clunky user experience. Users were required to know what mode to select within the UI in advance before entering their question to the selected tool. Moreover, the different tools were isolated from each other, they lacked bidirectional links that would allow for tools to collaborate to generate better responses. Our team is working on a new architecture, seen on the right in the below figure, with the goal to address many of the UX shortcomings of our original system while improving the accuracy and depth of responses from the LLM. This new system will automatically select the appropriate tool to use based off the user’s question. Each tool will be capable of calling on any of the other tools available to the LLM, resulting in a collaborative pipeline where tools can pass data between other tools until enough data is received to generate an answer to the user’s question. Using a locally deployed, open-source, LLM, the NASA OCARI team, in collaboration with Collins Aerospace, will implement a prototype application that will bridge knowledge across multiple sources to assist System Engineers (SEs) with requirements discovery and tracing, research question and use case identification, and assumption validation. Such a system will also allow SEs to more easily, and intuitively, explore the AAM ecosystem, ultimately improving the efficiency and effectiveness of the SE's research and decision-making processes surrounding ConOps development and validation. In this session, our team will provide a video demonstration of our new prototype architecture in action. We will also present an overview of our prototype system architecture and talk about its advantages over traditional LLM deployments along with how those advantages can provide additional value to the field of System Engineering.

systems engineering↗

The I4 Online Query Tool for Earth Observations Data

The NASA Earth Observation System Data and Information System (EOSDIS) delivers an average of 22 terabytes per day of data collected by orbital and airborne sensor systems to end users through an integrated online search environment (the Reverb/ECHO system). Earth observations data collected by sensors on the International Space Station (ISS) are not currently included in the EOSDIS system, and are only accessible through various individual online locations. This increases the effort required by end users to query multiple datasets, and limits the opportunity for data discovery and innovations in analysis. The Earth Science and Remote Sensing Unit of the Exploration Integration and Science Directorate at NASA Johnson Space Center has collaborated with the School of Earth and Space Exploration at Arizona State University (ASU) to develop the ISS Instrument Integration Implementation (I4) data query tool to provide end users a clean, simple online interface for querying both current and historical ISS Earth Observations data. The I4 interface is based on the Lunaserv and Lunaserv Global Explorer (LGE) open-source software packages developed at ASU for query of lunar datasets. In order to avoid mirroring existing databases - and the need to continually sync/update those mirrors - our design philosophy is for the I4 tool to be a pure query engine only. Once an end user identifies a specific scene or scenes of interest, I4 transparently takes the user to the appropriate online location to download the data. The tool consists of two public-facing web interfaces. The Map Tool provides a graphic geobrowser environment where the end user can navigate to an area of interest and select single or multiple datasets to query. The Map Tool displays active image footprints for the selected datasets (Figure 1). Selecting a footprint will open a pop-up window that includes a browse image and a link to available image metadata, along with a link to the online location to order or download the actual data. Search results are either delivered in the form of browse images linked to the appropriate online database, similar to the Map Tool, or they may be transferred within the I4 environment for display as footprints in the Map Tool. Datasets searchable through I4 (http://eol.jsc.nasa.gov/I4_tool) currently include: Crew Earth Observations (CEO) cataloged and uncataloged handheld astronaut photography; Sally Ride EarthKAM; Hyperspectral Imager for the Coastal Ocean (HICO); and the ISS SERVIR Environmental Research and Visualization System (ISERV). The ISS is a unique platform in that it will have multiple users over its lifetime, and that no single remote sensing system has a permanent internal or external berth. The open source I4 tool is designed to enable straightforward addition of new datasets as they become available such as ISS-RapidSCAT, Cloud Aerosol Transport System (CATS), and the High Definition Earth Viewing (HDEV) system. Data from other sensor systems, such as those operated by the ISS International Partners or under the auspices of the US National Laboratory program, can also be added to I4 provided sufficient access to enable searching of data or metadata is available. Commercial providers of remotely sensed data from the ISS may be particularly interested in I4 as an additional means of directing potential customers and clients to their products.

Stefanov, William L.↗

High-Frequency Excitation of a Plane Wake

In the early 1990's, Glezer and his co-workers at Georgia Tech made a startling discovery. They found that forcing at frequencies too high to directly affect the production scales led to a dramatic alteration in the development of a turbulent shear layer. An experimental study of this phenomenon is presented in Wiltse and Glezer. They used piezoelectric actuators located near the jet exit plane to force the shear layers of a square low-speed jet. The actuators were driven at a high frequency in the Kolmogorov inertial subrange, much higher than the frequencies associated with the large-scale motion (where the turbulent energy is produced and located) but much lower than those associated with the Kolmogorov scale (where the turbulent energy is dissipated). Measurements of the shear-layer turbulence showed that direct excitation of small-scale motion by high-frequency forcing led to an increase in the turbulent dissipation of more than an order of magnitude in the initial region of the shear layer! The turbulent dissipation gradually decreased with downstream distance but remained above the corresponding level for the unforced flow at all locations examined. The high-frequency forcing increased the turbulent kinetic energy in the initial region near the actuators, but the kinetic energy decreased quite rapidly with downstream distance, dropping to levels that were a small fraction of the level for the unforced case. Perhaps most importantly from the present standpoint, the high-frequency forcing significantly decreased the energy in the large-scale motion, increasingly so with downstream distance. Wiltse and Glezer interpreted this behavior as an enhanced transfer of energy from the large scales to the small scales. The initial work by Wiltse and Glezer has expanded into other applications. To explore the potential of high-frequency forcing for active acoustic suppression, in 1998 the first author proposed a set of experiments involving an edge tone shear layer and an open cavity flow. This work was funded by the US Air Force Research Laboratory, and the experiments were developed and executed at Boeing by Raman and Kibens. These experiments involved high-frequency forcing applied to low-speed flows using wedge piezo actuators and powered resonance tubes. The system is simple, open loop, compact, potentially requires little power, and is easily integrated. Dramatic results, such as reductions of 20 dB in spectral peaks and 5-8 dB in overall levels across the entire acoustic spectrum, were obtained in some cases. Sample results are presented. Following this success in low-speed flows, an international cooperative program continuing this work involved transonic experiments in a mid-size facility in the United Kingdom. Similar reductions in noise level were obtained in these transonic experiments. Discussion of this work is given in Raman et at. and Stanek, Raman, Kibens, and Ross. Other experiments at Georgia Tech have shown significant potential of high-frequency forcing in controlling reaction rates in chemically reacting flows.

Cain, Alan B.↗

Shoot growth in aseptically cultivated daylily and haplopappus plantlets after a 5-day spaceflight

Plantlets of daylily (Hemerocallis cv. Autumn Blaze) regenerated from cell suspensions, and 4 clonal populations of Haplopappus gracilis were aseptically cultivated aboard the Shuttle "Discovery" during a 5-day mission within NASA's Plant Growth Unit (PGU) apparatus. Daylily was selected as a representative herbaceous perennial monocotyledon and the haplopappus clones represented an annual dicotyledon. The latter included 4 strains with different physiological and morphological characteristics: two aseptic seedling clones (each generated from a single seedling) and two tissue culture-derived lines. Mean daily growth rates for the primary shoots of all plantlets averaged 4.13 mm day-1 (SD = 2.20) for the flight experiment and 4.68 mm day-1 (SD = 2.59) for the ground control. Comparable growth rates calculated by summing both the primary and secondary shoots for all plantlets were 5.94 mm day-1 (SD = 2.89) for the flight experiment and 6.38 mm day-1 (SD = 3.71) for the control. Statistically significant differences existed between: (1) flight vs control primary shoot growth (the controls growing more than plantlets subjected to spaceflight conditions), (2) the different populations (the daylily gaining more shoot material than any of the haplopappus populations and the haplopappus seedling clones outperforming the tissue culture-derived haplopappus lines), and (3) the individual Plant Growth Chambers contained within the PGU. The data suggest that some spaceflight-associated factor(s) increased the tendency for primary shoot apices to degrade or senesce, resulting in the release of apical dominance and permitting the emergence of axillary branches, which subsequently partially compensated for the reduced primary axis growth. In addition to spaceflight-associated factors, the physiologically diverse nature of the experimental material as well as environmental heterogeneities within the culture apparatus contributed to the variation in growth results. The findings could explain some discrepancies reported from various plant culture experiments conducted in space.

short duration↗

Jet Propulsion Laboratory: Annual Report 2007

Many milestones are celebrated in the business of space exploration, but one of them that arrived this year has particular meaning for us. Half a century ago, on January 31, 1958, the Jet Propulsion Laboratory was responsible for creating America's first satellite, Explorer 1, and joined with the Army to launch it into orbit. That makes 2007 the 50th year we have been sending robotic craft from Earth to explore space. No other event before or since has had such a profound effect on JPL's basic identity, setting it on the path to become the world's leader in robotic solar system exploration. It is not lost on historians that Explorer 1, besides being America's first satellite, was also the first spacecraft from any country to deliver scientific results in its case, the discovery of the Van Allen Radiation Belts that surround Earth. Science, of course, has been the prime motivator for all the dozens of missions that we have lofted into space in the half-century since then. JPL has sent spacecraft to every planet in the solar system from Mercury to Neptune, some of them very sophisticated machines. But in one way or another, they all owe their heritage to the 31-pound bullet-shaped probe JPL shot into space in 1958. Although we have ranged far and wide across the solar system, we have a very strong contingent of satellites and instruments dedicated, like Explorer, to the environment of our home planet. JPL missions have been providing much of the data to establish the facts of global warming - most especially, the melting of ice sheets in Greenland and Antarctica. During the past year, JPL and our parent organization, the California Institute of Technology, have created a task force to focus the special capabilities of the Laboratory and campus on ways to better understand the physics of global change. While Earth is a chaotic and dynamic system capable of large natural variations, evidence is mounting that human activities are playing an increasingly important role. A central piece of this effort is a search for novel energy sources to replace fossil fuels, the combustion of which adds carbon dioxide to our atmosphere. All of this is supported by our worldwide Deep Space Network, which provides the communication link between spacecraft and the ground. In addition, missions are infused with technologies developed by researchers working on projects for non-NASA sponsors as well as on pure research.

Jet Propulsion Laboratory (JPL)↗

Rapid Biochemical Analysis on the International Space Station (ISS): Preparing for Human Exploration of the Moon and Mars

The Lab-on-a-Chip Application Development - Portable Test System, known as LOCAD-PTS, was launched to the International Space Station (ISS) aboard Space Shuttle Discovery (STS-116) on December 9th,2006. Since that time, it has remained onboard ISS and has been operated by the crew on 10 separate occasions LOCAD-PTS is a handheld device for rapid biochemical analysis; it consists of a spectrophotometer, a series of interchangeable cartridges, a pipette and several clean/sterilized swabbing kits to obtain samples from ISS surfaces. Sampling, quantitative analysis and data retrieval is performed onboard, therefore reducing the need to return samples to Earth. Less than 20 minutes are required from sampling to data, significantly faster than existing culture-based methods on ISS, which require 3-5 days. Different cartridges are available for the detection of different target molecules (simply by changing the formulation within each cartridge), thereby maximizing the benefit and applications addressed by a single instrument. Initial tests on ISS have focused on the detection of the bact.erial macromolecule endotoxin, a component of bacterial cell walls. LOCAD-PTS detects endotoxin with a cartridge that contains a formulation known as Limulus Amebocyte Lysate (LAL) assay. LAL is derived from blood of the horseshoe crab, Limulus polyphemus, and detects enodotoxin with an enzyme cascade that triggers generation Of a yellow colored dye, p-nitroanaline. The more p-nitroanaline product, the more endotoxin is in the original sample. To enable quantitative analysis, the absorbance of this color is measured by LOCAD-PTS through a 395 nm filter and compared with an internal calibration curve, to provide a reading on the LED display that ranges from 0.05 Endotoxin Units (EU)/ml to 5 EU/ml. Several surface sites were analyzed within ISS between March 2007 and February 2008, including multiple locations in the US Laboratory Destiny, Node 1 Unity, AMock, and Service Module Zvezda. The goals of this initial study were to i) test the cleanliness of reagents/supplies on orbit, ii) test the crew's ability to collect and process a sample in microgravity without contamination, iii) demonstrate nominal function of the LOCAD-PTS, and iv) provide a general survey of endotoxin within the ISS. The surface sites varied greatly in terms of their frequency-of-use and material texture/composition; from relatively smooth aluminum, to fabric, to the room temperature vulcanizing (RTV) rubber of a Extravehicular Mobility Unit (EMU) spacesuit. Results showed that: i) the swabbing kits and reagents remained clean on orbit, ii) the crew could collect and process a sample without contamination, and iii) the LOCAD-PTS functioned nominally in > 99% of the 55 tests completed. We will present detailed results of the survey of endotoxin on ISS surfaces. These results and technology are important in the near-term - by providing an extra tool in the toolbox for ISS microbial monitoring. They are also important in the longer term as valuable preparation for human exploration of the Moon and Mars. One of the proposed science goals for the human exploration of Mars will be to detect and characterize any indigenous biological molecules that may exist on the Martian surface. To achieve that goal, the crew must have the technology available onboard to differentiate indigenous biology from any terrestrial biological material brought to Mars by the spacecraft and crew (termed 'forward contamination'). The LAL assay is already one of the official methods used by NASA's planetary protection program to certify cleanliness of interplanetary robotic spacecraft prior to launch; and therefore endotoxin is a good marker of forward contamination (as well as other microbial molecules detectable with LOCAD-PTS e.g. box-1, 3-glucan and lipoteichoic acid). Furthermore, the distribution and abundance of these molecules on the ISS provides a good indicator of what to expect on the Crew Exploratioehicle Orion, the lunar lander Antares, and future crewed spacecraft destined for Mars. In addition, technology such as LOCAD-PTS has been proposed to help evaluate forward contamination during lunar surface operations by the crew, as preparation for the human exploration of Mars.

Maule, J.↗