Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Dataset for "Enrichment of phosphates, lead, and mixed soil-organic particles in INPs at the Southern Great Plains site"

Ice nucleating particles (INPs) are rare particles that initiate primary ice formation, a critical step required for subsequent important cloud microphysical processes that ultimately govern cloud phase and cloud radiative properties. Laboratory studies have found that organic-rich dusts, such as those found in soils, are more efficient INPs compared to mineral dust. However, the atmospheric relevance of these organic-rich dusts are not well understood, particularly in regions with significant agricultural activity. The Agricultural Ice nuclei at the Southern Great Plains field campaign (AGINSGP) was conducted in rural Oklahoma to investigate how soil dusts contribute to INP populations in the Great Plains. We present chemical characterization of ambient and ice crystal residual particles from a single day of sampling using single particle mass spectrometry (SPMS) and scanning microscopy. Ambient particle concentrations were primarily carbonaceous or secondary aerosol, while dust particles were enhanced in the residual particles. Dust particles measured during residual sampling contained elevated signals for phosphate ($^{63}$PO$_2^-$ and $^{79}$PO$_3^-$) and lead ($^{208}$Pb$_2^+$). Nitrate was slightly depleted relative to ambient dust, and strong sulfate signals were not seen in the residual particles measured by the miniSPLAT. The residual and ambient particles measured by the miniSPLAT were approximately the same size, though this may be a reflection of the SPMS size-dependent transmission efficiency and not that of physical truth. This study shows that organic-rich soils may be important contributors to the ambient INP population in agricultural regions.

Cornwell, Gavin C↗

Transverse Tunable Magneto-Plasmonic Kerr Effect in Large Area Micro-Patterned Au/Co/Au Structures

By sputtering the sequence of Au/Co/Au layers on ordered microspheres, two-dimensional plasmonic arrays with sufficient angular tunability and enhanced transverse magneto-plasmonic Kerr effect are fabricated. For confirmation of enhanced optical properties, we simulated the fabricated sample using the finite difference time domain method. In order to investigate the effect of rotation speed on the anisotropy of the samples and their magneto-plasmonic responses, these patterned structures are fabricated under dissimilar holder rotation speeds for inner cobalt layer deposition (i.e., Au (10 rpm)/Co (30 rpm)/Au (10 rpm) and Au (10 rpm)/Co (10 rpm)/Au (10 rpm) structures). Our results show that the transverse magneto-plasmonic Kerr effect measurements can provide unique and useful information about the structure and quality of the fabricated samples. In addition, the ability of the samples as a tunable magnetic field sensor has been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, Texture, and Mechanical Properties of Continuously Extruded and Rolled AZ31 Magnesium Alloy Sheets

It is difficult to fabricate magnesium alloy sheets at room temperature due to their hexagonal close-packed structure. In this paper, we proposed a new process that can be used to fabricate AZ31 magnesium alloy sheets with fine-grained microstructure and good mechanical properties. AZ31 magnesium alloy sheets with dimensions of 160 mm × 8 mm were obtained successfully by a continuous extrusion technique. The extruded sheets were then rolled by two different rolling routes, Route 1: the extruded sheet was heated at 350 °C and then rolled without heating of rolls and Route 2: the sheet was rolled without any previous heating by heating rolls at 280 °C. The microstructure and texture evolution as well as mechanical properties of the continuously extruded and rolled sheets were examined experimentally. The magnesium alloy sheets with relatively fine grains of 4.5-8.3 µm were obtained by continuous extrusion followed by rolling processes. The tensile strength of continuously extruded AZ31 Mg alloy sheets can be effectively increased by rolling using heating rolls (Route 2), while the ductility was enhanced by rolling heated sheets (Route 1). The mixed microstructure, consisting of refined DRX grains and deformed grains, contributes to enhancement in tensile strength of the sheet samples rolled by Route 2 due to grain-boundary strengthening and work hardening. Lower temperature and larger rolling reduction are two main factors for improving the tensile strength of AZ31magnesium alloy sheets.

36 MATERIALS SCIENCE↗

Microstructure evolution of gadolinium doped cerium oxide under large thermal gradients

In this report the effects of large thermal gradient annealing on the microstructure of 10 mol% gadolinium doped ceria (GDC) were investigated. GDC powder was prepared by solvent deficient method and sintered at 1650 °C for 10 h to achieve dense ceramics with ~8 μm grain size. The densified GDC samples were subsequently annealed using a 60 W infrared laser at over 2100 °C for 1 h under a thermal gradient equivalent to ~0.3–0.5 °C/μm. The post-annealed samples at 2150 °C for 1 h exhibit grains with average length and width of 37 and 28 μm, respectively. Electron backscattered diffraction (EBSD) analysis revealed that the post-annealed sample at 2150 °C consists of grains oriented close to five principal directions (<4 3 10>, <0 0 1> and <13 1 14> on [0 0 1], and <7 6 20> and <7 2 7> on [0 1 0]) within a tolerance angle of ±10°, whereas the grains of the pre-annealed sample are randomly oriented. Gadolinium diffuses 20–30 μm away from the irradiated surface, with the measured composition of regions deeper than 30 μm, Ce 0.86 Gd 0.14 O 1.93 , is close to that of the pre-annealed sample, Ce 0.87 Gd 0.13 O 1.94 . Enhancement of total conductivity of the post-annealed GDC (1.1 × 10 -3 S cm -1 at 500 °C, and 2.1 × 10 -2 S cm -1 at 700 °C) is observed when compared to the pre-annealed GDC (3.1 × 10 -5 S cm -1 at 500 °C, and 1.7 × 10 -3 S cm -1 at 700 °C), and points to the decrease in the grain boundary (GB) resistivity. This could be attributed to both the change in GB area and grain alignment.

36 MATERIALS SCIENCE↗

Waterless fracturing technologies for unconventional reservoirs-opportunities for liquid nitrogen

During the past two decades, hydraulic fracturing has significantly improved oil and gas production from shale and tight sandstone reservoirs in the United States and elsewhere. Considering formation damage, water consumption, and environmental impacts associated with water-based fracturing fluids, efforts have been devoted to developing waterless fracturing technologies because of their potential to alleviate these issues. Herein, key theories and features of waterless fracturing technologies, including Oil-based and CO 2 energized oil fracturing, explosive and propellant fracturing, gelled LPG and alcohol fracturing, gas fracturing, CO 2 fracturing, and cryogenic fracturing, are reviewed. We then experimentally elaborate on the efficacy of liquid nitrogen in enhancing fracture initiation and propagation in concrete samples, and shale and sandstone reservoir rocks. In our laboratory study, cryogenic fractures generated were qualitatively and quantitatively characterized by pressure decay tests, acoustic measurements, gas fracturing, and CT scans. The capacity and applicability of cryogenic fracturing using liquid nitrogen are demonstrated and examined. Furthermore, by properly formulating the technical procedures for field implementation, cryogenic fracturing using liquid nitrogen could be an advantageous option for fracturing unconventional reservoirs.

03 NATURAL GAS↗

Unusual ferromagnetism in high purity ZnO sintered ceramics

We report our novel result regarding the observation of unusual but clean ferromagnetic (FM) signature at room temperature (RT) in high pure (99.999%) ZnO bulk ceramics processed by slow step sintering schedule (SSSS). All the sintered samples showed ferromagnetic signature at room temperature. However, sample sintered at 850 {sup o}C showed more prominent M-H loop and saturation magnetization with respect to samples sintered at 500 {sup o}C and 1300 {sup o}C. Observation of FM behavior in sintered ceramics may be attributed to the presence of defects like cation (Zn)/anion (O) vacancies and interstitials created during the processing of sample. It is anticipated that SSSS promotes enhanced physical bulk as well as surface densification and at the same time confined the outgassing of free oxygen and Zn from the bulk which are acting as suitable defect sites inside the sintered grains and grain boundary junctions. Our micro-Raman and X-ray photoelectron studies revealed the existence of these defects which are believed to be the origin of the unconventional ferromagnetism (FM) of ZnO bulk ceramic at room temperature.

36 MATERIALS SCIENCE↗

Effect of Mn doping on structural and magnetic susceptibility of C-type rare earth nano oxides Er{sub 2−x}Mn{sub x}O{sub 3}

Graphical abstract: Display Omitted Highlights: ► Er{sub 2−x}Mn{sub x}·O{sub 3} (0.0 ≤ x ≤ 0.20) prepared by sol–gel method. ► The change in lattice parameter is not linear with x due to the change in crystallite size with doping. ► Anomalous concentration dependence is found in magnetic susceptibility. ► The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x. ► Superexchange interactions between Er ions depending on the amount of Mn or Er in different sites. -- Abstract: The manganese doped rare earth oxides Er{sub 2−x}Mn{sub x} O{sub 3} (0.0 ≤ x ≤ 0.20) were synthesized by a sol–gel process and analyzed by X-ray diffraction using Rietveld refinement methods. A single phase solid solution is formed up to x = 0.15 while for x ≥ 0.2 a manganese oxide phase appears in the diffraction pattern. Preferential cationic distribution between the non-equivalent sites 8b and 24d of space group Ia3{sup ¯} is found for all samples but to a different extent. The octahedral volume and average bond length of Er{sub 1}-O for 8b site decrease while both octahedral volume and bond length of Er{sub 2}-O for 24d site increase. Magnetization measurements were done in the temperature range 5–300 K. The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x, except for sample x = 0.05 where the magnetization is enhanced. The Curie-Weiss paramagnetic temperatures indicate antiferromagnetic interaction.

36 MATERIALS SCIENCE↗

Ultra-low field 13 C MRI of hyperpolarized pyruvate

Medicine is evolving beyond therapy largely predicated on anatomical information and towards incorporating patient-specific molecular biomarkers of disease for more accurate diagnosis and effective treatment. The complementary combination of hyperpolarization by spin-lock induced crossing signal amplification by reversible exchange (SLIC SABRE) and low field magnetic resonance imaging (MRI) can enable accessible metabolic imaging to advance personalized medicine. Hyperpolarized 13 C-enriched pyruvate has demonstrated promise for imaging metabolism in cancer, heart disease and neurodegenerative disorders; however, broader clinical adoption awaits validated clinical indications, and is further constrained by the cost and limited availability of current hyperpolarization technology. Parahydrogen-based polarization techniques, paired with low-cost high-performance MRI at millitesla fields, offer a means of broadening the reach of metabolic imaging. Here we show results demonstrating in situ hyperpolarization of pyruvate at 6.5 mT by SLIC SABRE, followed by immediate readout without field cycling or sample shuttling. We achieve 13 C signal enhancements several million times above thermal equilibrium at 6.5 mT, corresponding to polarization levels of approximately 3%. Leveraging this enhancement, we perform 13 C MRI and acquire NMR spectra with resolution sufficient to distinguish chemical shifts between pyruvate isotopomers. These results show a viable pathway towards accessible metabolic imaging with hyperpolarized 13 C MRI at ultra-low field.

Medical and clinical diagnostics↗

Reversible oxygen intercalation in hexagonal Y 0.7 Tb 0.3 MnO 3+δ : toward oxygen production by temperature-swing absorption in air

The oxygen storage capacity, structure and thermodynamic stability were studied for hexagonal Y 0.7 Tb 0.3 MnO 3+δ in oxygen and air to assess its applicability for oxygen separation from air by a temperature-swing adsorption process. We show that large amounts of oxygen excess can be reversibly incorporated into and extracted from small particle-size samples of Y 0.7 Tb 0.3 MnO 3+δ prepared by sol–gel synthesis for fixed oxygen partial pressures. The hyperstoichiometric material, with δ ≥ 0.45 prepared in oxygen or high-pressure oxygen atmospheres, assumes a new hexagonal structure with interstitial oxygen defects near the nominally five coordinated Mn site as determined by neutron diffraction and supported by scanning and transmission electron microscopy. Thermogravimetric measurements demonstrate reversible intercalation of oxygen in a pure O 2 atmosphere at around 300 °C, but more importantly, also in air over a remarkably narrow temperature range of ~20 °C, albeit producing smaller oxygen amounts δ ≤ 0.25. Comparison of samples' properties obtained by the sol–gel and solid-state synthesis methods confirms enhanced oxygen storage capacity and oxygen exchange kinetics for the small particle-size samples which exhibit larger specific surface areas. Sequential temperature-swing absorption and long-term annealing experiments demonstrate the high practical potential of Y 0.7 Tb 0.3 MnO 3 compounds for the industrial production of oxygen enriched gases by utilization of waste heat at 250–350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Cr/Zn Substitutions on Dielectric Properties of CaCu{sub 3}Ti{sub 4}O{sub 12}(CCTO) Ceramics

Effects of Zn and Cr substitutions on dielectric properties of CaCu{sub 3-x}Zn{sub x}Ti{sub 4-y}Cr{sub y}O{sub 12} ceramics are reported. Dielectric measurements at room temperature for un-substituted CaCu{sub 3-x}Zn{sub x}Ti{sub 4-y}Cr{sub y}O{sub 12}(x = 0, y = 0) between 10{sup 2}-10{sup 6} Hz showed dielectric constant of 2.7x10{sup 4} at 10{sup 2} Hz. Substitution of Zn for Cu in CaCu{sub 3-x}Zn{sub xTi{sub 4{sub -{sub yCr{sub yO{sub 1{sub 2}}}}}}}(y = 0, x = 0.10, 0.50)caused dielectric constant to drop with increasing x. Cr substitution at Ti-site in CaCu{sub 3-x}Zn{sub xTi{sub 4{sub -{sub yCr{sub yO{sub 1{sub 2}}}}}}}(x = 0, x = 0,) also caused decrease in dielectric constant. However, at x = 0.50, the dielectric constant at low frequency was enhanced compared to the un-substituted sample. Our results indicate that Cu and Ti sites play an important role in the formation of Internal Barrier Layer Capacitance (IBLC) in CCTO.

36 MATERIALS SCIENCE↗

Anisotropy induced large exchange bias behavior in ball milled Ni-Co-Mn-Sb alloys

We report the effect of decrease in the grain size on the structural, magnetic and exchange bias (EB) behavior in ball milled Ni{sub 50-x}Co{sub x}Mn{sub 38}Sb{sub 12} (x=0 and 5) Heusler alloys. The existence of a wide range of grain sizes in the ball milled samples results in dramatic changes in the structural and magnetic properties. For x=0, a large EB field of 3.2 kOe is observed in the ball milled sample, compared to a value of 245 Oe of the bulk sample. This increase is attributed to the enhanced exchange coupling between the soft and hard magnetic particles.

36 MATERIALS SCIENCE↗

The origin of 0.78 eV line of the dislocation related luminescence in silicon

In this paper, the 0.78 eV line of the dislocation related luminescence in the electron-irradiated silicon has been investigated. It is found that the 0.78 eV line only exists in float zone silicon samples, and its intensity could be largely enhanced by high temperature and long time annealing while no 0.78 eV line was found in Czochralski silicon. The activation energy of 0.78 eV line in floating-zone silicon is {approx}13 meV, indicating a different nature from that of D1/D2 lines which can be ascribed to specific reconstructed dislocations which could be easily affected by point defects and temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of isothermal hot pressing-doping treatment on the electrical and mechanical properties of bulk Bi-Sr-Ca-Cu-O

The influences of (isothermal hot pressing-doping) treatment on the microstructure, electrical and mechanical properties of Bi{sub 2}Sr{sub 3-x}Ca{sub x}Cu{sub 2}O{sub 8+δ} (BSCCO), x ranging from 0.0 to 2 are assessed. BSCCO pellets were prepared by isothermal hot pressing (IHP) technique. The experimental works in this study consists of dc electrical resistivity measurements for electrical and superconducting properties, microhardness tests for mechanical characteristics, powder x-ray diffraction (XRD) for phase analyses (phase ratio), differential thermal analysis (DTA) for melting behaviour and scanning electron microscopy (SEM) for microstructure investigations. The results indicated that the Ca{sup 2+} doping and isothermal hot pressing increased significantly the superconducting transition temperature (T{sup o}{sub c}), which promotes the formation of high-Tc phase. Additionally, Vickers microhardness (VHN), Young's modulus, fracture toughness, brittleness index and elastic stiffness coefficient were also improved. Moreover, IHP-Doping improved the microstructure and the density of the BSCCO studied samples. Microhardness was found to be load dependent. Otherwise, we evaluated the load independent hardness, Young's modulus, fracture toughness and brittleness index of BSCCO samples. The possible reasons for the observed enhancement in electrical and mechanical properties due to (i) the homogeneity of grain region distribution (ii) the enhancement of superconducting phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large enhanced dielectric permittivity in polyaniline passivated core-shell nano magnetic iron oxide by plasma polymerization

Commercial samples of Magnetite with size ranging from 25–30 nm were coated with polyaniline by using radio frequency plasma polymerization to achieve a core shell structure of magnetic nanoparticle (core)–Polyaniline (shell). High resolution transmission electron microscopy images confirm the core shell architecture of polyaniline coated iron oxide. The dielectric properties of the material were studied before and after plasma treatment. The polymer coated magnetite particles exhibited a large dielectric permittivity with respect to uncoated samples. The dielectric behavior was modeled using a Maxwell–Wagner capacitor model. A plausible mechanism for the enhancement of dielectric permittivity is proposed.

36 MATERIALS SCIENCE↗

Rendering graphene supports hydrophilic with non-covalent aromatic functionalization for transmission electron microscopy

Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated samples for transmission electron microscopy (TEM), either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of thin amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled, high electrical carrier mobility. However, the hydrophobic properties of graphene have prevented its routine application in Cryo-TEM. This Letter reports a method for rendering graphene TEM supports hydrophilic—a convenient approach maintaining graphene's structural and electrical properties based on non-covalent, aromatic functionalization.

36 MATERIALS SCIENCE↗

Zn precipitation and Li depletion in Zn implanted ZnO

Ion implantation of Zn substituting elements in ZnO has been shown to result in a dramatic Li depletion of several microns in hydrothermally grown ZnO. This has been ascribed to a burst of mobile Zn interstials. In this study, we seek to understand the reason behind this interstitial mediated transient enhanced diffusion in Li-containing ZnO samples after Zn implantation. ZnO wafers were implanted with Zn to two doses, 5 × 10{sup 15} cm{sup −2} and 1 × 10{sup 17} cm{sup −2}. Secondary ion mass spectrometry was carried out to profile the Li depletion depth for different annealing temperatures between 600 and 800 °C. The 800 °C annealing had the most significant Li depletion of close to 60 μm. Transmission electron microscopy (TEM) was carried out in selected samples to identify the reason behind the Li depletion. In particular, TEM investigations of samples annealed at 750 °C show significant Zn precipitation just below the depth of the projected range of the implanted ions. We propose that the Zn precipitation is indicative of Zn supersaturation. Both the Li depletion and Zn precipitation are competing synchronous processes aimed at reducing the excess Zn interstitials.

36 MATERIALS SCIENCE↗

Rippled metamaterials with scale-dependent tailorable elasticity

Thermally induced ripples are intrinsic features of nanometer-thick films, atomically thin materials, and cell membranes, significantly affecting their elastic properties. Despite decades of theoretical studies on the mechanics of suspended thermalized sheets, controversy still exists over the impact of these ripples, with conflicting predictions about whether elasticity is scale-dependent or scale-independent. Experimental progress has been hindered so far by the inability to have a platform capable of fully isolating and characterizing the effects of ripples. This knowledge gap limits the fundamental understanding of thin materials and their practical applications. Here, we show that thermal-like static ripples shape thin films into a class of metamaterials with scale-dependent, customizable elasticity. Utilizing a scalable semiconductor manufacturing process, we engineered nanometer-thick films with precisely controlled frozen random ripples, resembling snapshots of thermally fluctuating membranes. Resonant frequency measurements of rippled cantilevers reveal that random ripples effectively renormalize and enhance the average bending rigidity and sample-to-sample variations in a scale-dependent manner, consistent with recent theoretical estimations. The predictive power of the theoretical model, combined with the scalability of the fabrication process, was further exploited to create kirigami architectures with tailored bending rigidity and mechanical metamaterials with delayed buckling instability.

Applied Physical Sciences↗

DETAILED ABUNDANCES OF TWO VERY METAL-POOR STARS IN DWARF GALAXIES

The most metal-poor stars in dwarf spheroidal galaxies (dSphs) can show the nucleosynthetic patterns of one or a few supernovae (SNe). These SNe could have zero metallicity, making metal-poor dSph stars the closest surviving links to Population III stars. Metal-poor dSph stars also help to reveal the formation mechanism of the Milky Way (MW) halo. We present the detailed abundances from Keck/HIRES spectroscopy for two very metal-poor stars in two MW dSphs. One star, in the Sculptor dSph, has [Fe I/H] = -2.40. The other star, in the Ursa Minor dSph, has [Fe I/H] = -3.16. Both stars fall in the previously discovered low-metallicity, high-[{alpha}/Fe] plateau. Most abundance ratios of very metal-poor stars in these two dSphs are largely consistent with very metal-poor halo stars. However, the abundances of Na and some r-process elements lie at the lower end of the envelope defined by inner halo stars of similar metallicity. We propose that the metallicity dependence of SN yields is the cause. The earliest SNe in low-mass dSphs have less gas to pollute than the earliest SNe in massive halo progenitors. As a result, dSph stars at -3 < [Fe/H] < -2 sample SNe with [Fe/H] << -3, whereas halo stars in the same metallicity range sample SNe with [Fe/H] {approx} -3. Consequently, enhancements in [Na/Fe] and [r/Fe] were deferred to higher metallicity in dSphs than in the progenitors of the inner halo.

79 ASTRONOMY AND ASTROPHYSICS↗