Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalized Linear Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Determination of the Transition Temperature of a Weak Ferromagnetic Thin Film by Means of an Evolution of the Method Based on the Arrott Plots

The ferromagnetic transition temperature (T{sub c}) of a weak ferromagnetic thin film Cu{sub 0.38}Ni{sub 0.62} has been estimated by using an evolution of the Belov, Goriaga, and Arrott (BGA) model. In fact, the typically used measurements of the zero-field-cooled-field-cooled magnetic moment (m) as a function of temperature (T), the magnetic hysteresis loops (m(H)) as a function of field, and the temperature dependence of the remanent magnetic moment, performed on our sample, did not allow us to individuate precisely the value of T{sub c}, mainly due to the influence of thermal effects and noise on the weak ferromagnetic response of the sample, resulting in a large uncertainty in the estimation of T{sub c}. On the other hand, also the commonly used method of determining the T{sub c} by means of a linear extrapolation of the high-field region of m{sup 2} as a function of the normalized magnetic field (H/m) at different temperatures (Arrott curves), working though for our analyzed material, could not completely fulfill the basic assumptions of the BGA model in general. For these reasons, we have considered the analysis of the derivatives of the Arrott curves, starting from observing that the T{sub c} of the sample corresponds to the temperature where the curvature of the Arrott curves at low fields inverts. In this way, the sensitivity in the determination of the Curie point from the inductive measurements of the magnetic moment is improved while the correct assumptions of the Arrott model are also fully respected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimal control of wave energy converters

Optimal control theory is applied to compute control for a single-degree-of-freedom heave wave energy converter. The goal is to maximize the energy extraction per cycle. Both constrained and unconstrained optimal control problems are presented. Both periodic and non-periodic excitation forces are considered. In contrast to prior work, it is shown that for this non-autonomous system, the optimal control, in general, includes both singular arc and bang-bang modes. Conditions that determine the switching times to/from the singular arc are derived. Simulation results show that the proposed optimal control solution matches the solution obtained using the complex conjugate control. A generic linear dynamic model is used in the simulations. In conclusion, the main advantage of the proposed control is that it finds the optimal control without the need for wave prediction; it only requires the knowledge of the excitation force and its derivatives at the current time.

16 TIDAL AND WAVE POWER↗

A Generalized Mathematical Framework for Thermal Oxidation Kinetics

We present a generalized mathematical model for thermal oxidation and the growth kinetics of oxide films. The model expands long-standing classical models by taking into account the reaction occurring at the interface as well as transport processes in greater detail. The standard Deal-Grove model (the linear-parabolic rate law) relies on the assumption of quasi-static diffusion that results in a linear concentration profile of, for example, oxidant species in the oxide layer. By relaxing this assumption and resolving the entire problem, three regimes can be clearly identified corresponding to different stages of oxidation. Namely, the oxidation starts with the reaction-controlled regime (described by a linear rate law), is followed by a transitional regime (described by a logarithmic or power law depending on the stoichiometry coefficient m), and ends with the well-known diffusion-controlled regime (described by a parabolic rate law). Deal-Grove's theory is shown to be the lower order approximation of the proposed model. Various oxidation rate laws are unified into a single model to describe the entire oxidation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On Lyapunov boundary control of unstable magnetohydrodynamic plasmas

Starting from a simple, marginally stable model considered for Lyapunov based boundary control of flexible mechanical systems, we add a term driving an instability and prove that for an appropriate control condition the system can become Lyapunov stable. A similar approximate extension is found for the general energy principle of linearized magnetohydrodynamics. The implementation of such external instantaneous actions may, however, impose challenging constraints for fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Screening the fifth force in the Horndeski's most general scalar-tensor theories

We study how the Vainshtein mechanism operates in the most general scalar-tensor theories with second-order equations of motion. The field equations of motion, which can be also applicable to most of other screening scenarios proposed in literature, are generally derived in a spherically symmetric space-time with a matter source. In the presence of a field coupling to the Ricci scalar, we clarify conditions under which the Vainshtein mechanism is at work in a weak gravitational background. We also obtain the solutions of the field equation inside a spherically symmetric body and show how they can be connected to exterior solutions that accommodate the Vainshtein mechanism. We apply our general results to a number of concrete models such as the covariant/extended Galileons and the DBI Galileons with Gauss-Bonnet and other terms. In these models the fifth force can be suppressed to be compatible with solar-system constraints, provided that non-linear field kinetic terms coupled to the Einstein tensor do not dominate over other non-linear field self-interactions.

79 ASTRONOMY AND ASTROPHYSICS↗

Exactly unitary discrete representations of the metaplectic transform for linear-time algorithms

The metaplectic transform (MT), a generalization of the Fourier transform sometimes called the linear canonical transform, is a tool used ubiquitously in modern optics, for example, when calculating the transformations of light beams in paraxial optical systems. The MT is also an essential ingredient of the geometrical-optics modeling of caustics that we recently proposed. In particular, this application relies on the near-identity MT (NIMT); however, the NIMT approximation used so far is not exactly unitary and leads to numerical instability. Here, we develop a discrete MT that is exactly unitary, and approximate it to obtain a discrete NIMT that is also unitary and can be computed in linear time. We prove that the discrete NIMT converges to the discrete MT when iterated, thereby allowing the NIMT to compute MTs that are not necessarily near-identity. Finally, we then demonstrate the new algorithms with a series of examples.

47 OTHER INSTRUMENTATION↗

A simple biofuel surrogate blend for diesel fuel: heptane/iso-butanol mixtures and their droplet burning characteristics

• The burning rates of heptane/iso-butanol mixture droplets varied nonlinearly with composition. • Spherical droplet flames were produced by minimizing convective influences on burning. • Sooting propensities varied with mixture fraction and reduced as heptane was diluted with iso-butanol. • The evolution of droplet diameters was nearly linear throughout burning though the flame standoff ratio was not constant, thus indicating that burning was not quasi-steady. • The relative position of the flame to the droplet generally decreased by diluting heptane with iso-butanol. • A heptane/iso-butanol mixture is a good model surrogate system for a transportation fuel/biofuel blend.

Dalili, Alireza↗

A new method for obtaining model-free viscoelastic material properties from atomic force microscopy experiments using discrete integral transform techniques

Viscoelastic characterization of materials at the micro- and the nanoscale is commonly performed with the aid of force–distance relationships acquired using atomic force microscopy (AFM). The general strategy for existing methods is to fit the observed material behavior to specific viscoelastic models, such as generalized viscoelastic models or power-law rheology models, among others. Here we propose a new method to invert and obtain the viscoelastic properties of a material through the use of the Z-transform, without using a model. We present the rheological viscoelastic relations in their classical derivation and their z-domain correspondence. We illustrate the proposed technique on a model experiment involving a traditional ramp-shaped force–distance AFM curve, demonstrating good agreement between the viscoelastic characteristics extracted from the simulated experiment and the theoretical expectations. We also provide a path for calculating standard viscoelastic responses from the extracted material characteristics. The new technique based on the Z-transform is complementary to previous model-based viscoelastic analyses and can be advantageous with respect to Fourier techniques due to its generality. Additionally, it can handle the unbounded inputs traditionally used to acquire force–distance relationships in AFM, such as ramp functions, in which the cantilever position is displaced linearly with time for a finite period of time.

36 MATERIALS SCIENCE↗

ON THE GRAVITATIONAL STABILITY OF GRAVITO-TURBULENT ACCRETION DISKS

Low mass, self-gravitating accretion disks admit quasi-steady, “gravito-turbulent” states in which cooling balances turbulent viscous heating. However, numerical simulations show that gravito-turbulence cannot be sustained beyond dynamical timescales when the cooling rate or corresponding turbulent viscosity is too large. The result is disk fragmentation. We motivate and quantify an interpretation of disk fragmentation as the inability to maintain gravito-turbulence due to formal secondary instabilities driven by: (1) cooling, which reduces pressure support; and/or (2) viscosity, which reduces rotational support. We analyze the axisymmetric gravitational stability of viscous, non-adiabatic accretion disks with internal heating, external irradiation, and cooling in the shearing box approximation. We consider parameterized cooling functions in 2D and 3D disks, as well as radiative diffusion in 3D. We show that generally there is no critical cooling rate/viscosity below which the disk is formally stable, although interesting limits appear for unstable modes with lengthscales on the order of the disk thickness. We apply this new linear theory to protoplanetary disks subject to gravito-turbulence modeled as an effective viscosity, and cooling regulated by dust opacity. We find that viscosity renders the disk beyond ∼60 au dynamically unstable on radial lengthscales a few times the local disk thickness. This is coincident with the empirical condition for disk fragmentation based on a maximum sustainable stress. We suggest turbulent stresses can play an active role in realistic disk fragmentation by removing rotational stabilization against self-gravity, and that the observed transition in behavior from gravito-turbulent to fragmenting may reflect instability of the gravito-turbulent state itself.

79 ASTRONOMY AND ASTROPHYSICS↗

Anomalous Distributions of Primary Cosmic Rays as Evidence for Time-dependent Particle Acceleration in Supernova Remnants

Recent precise measurements of cosmic-ray (CR) spectra show that the energy distribution of protons is softer than those of heavier nuclei, and there are spectral hardenings for all nuclear compositions above ∼200 GV. Models proposed for these anomalies generally assume steady-state solutions of the particle acceleration process. We show that if the diffusion coefficient has a weak dependence on the particle rigidity near shock fronts of supernova remnants (SNRs), time-dependent solutions of the linear diffusive shock acceleration at two stages of SNR evolution can naturally account for these anomalies. The high-energy component of CRs is dominated by acceleration in the free expansion and adiabatic phases with enriched heavy elements and a high shock speed. The low-energy component may be attributed to acceleration by slow shocks propagating in dense molecular clouds with low metallicity in the radiative phase. Instead of a single power-law distribution, the spectra of time-dependent solutions soften gradually with the increase of energy, which may be responsible for the “knee” of CRs.

79 ASTRONOMY AND ASTROPHYSICS↗

A Lyapunov-Based Generalized Dc-Side Controller Design for PV-Connected Systems: Preprint

The objective of this paper is to realize a universal dc-side controller for photovoltaic (PV) systems where the control is agnostic to the downstream converter configuration. To achieve this, the downstream power converter and its controls are manipulated into an effective power control loop that is then cast into a generalized multi-loop design framework. On the dc side, a nonlinear small-signal model of the PV input is realized exclusively in terms of PV datasheet parameters (i.e., open-circuit voltage, short-circuit current, and maximum power point). Finally, a linear controller is used to modulate the dc-side PV system with the generic downstream power controller. A Lyapunov candidate is proposed to analyze the stability of the interconnected system and provide a streamlined approach for the controller design. The proposed design is validated on a 1-kVA experimental setup that interfaces a PV module to the grid.

dc-dc control↗

Modeling Systematic Discrepancies in Nuclear-Data Measurements with Machine Learning

Nuclear data and their associated co-variances are constantly being reevaluated as techniques improve and as new experimental data, as well as nuclearmodel developments, emerge. A standard technique used to evaluate mean values in nuclear data, and their associated covariances, is the generalized linear least squares (GLLS) method. Aligning with recent efforts to incorporate measurement features into nuclear data evaluation, we augment GLLS by including a linear term which attempts to predict potential systematic discrepancies in experimental data as related to the measurement features. Due to the general nature of this augmentation, we are able to apply this evaluation to three key observables: neutroninduced fission cross sections, the average prompt neutron multiplicity, and the prompt-fission neutron spectrum of ²³⁹Pu.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Applicability of 1D site response analysis to shallow sedimentary basins: A critical evaluation through physics-based 3D ground motion simulations

One-dimensional site response analysis (1D SRA) remains the standard practice in considering the effect of local soil deposits and predicting site-specific ground motions, although its range of applicability to realistic seismic wavefields is still in question. In this 1D approach, horizontal and vertical ground shaking are assumed to be induced by vertically propagating shear and compressional waves, respectively. A recent study based on analytical two-dimensional (2D) plane waves and simple point source earthquake simulations has shown two mechanistic limitations in this 1D modelling technique for general inclined seismic waves, that is, systematic over-prediction of the vertical motion and wave trapping in the 1D soil column. In this article, we evaluate in detail the applicability of this 1D modelling approach to realistic three-dimensional (3D) simulated seismic wavefields in shallow sedimentary basins. Linear-viscoelastic 1D SRA predictions using two types of input motions that are commonly used in practice—rock outcrop and in-column motions, are compared with the reference true site response results from 3D earthquake simulations in terms of various measures in the frequency and time domain. It is shown that the horizontal motion in the 3D seismic wavefield exhibits dominant shear wave propagation phenomenon, while the vertical motion is a combined effect of compressional and shear waves and can be over-predicted by the 1D approach when the incident seismic waves are inclined. Direct evidence of the wave refraction process that leads to the vertical motion over-prediction is provided. 1D SRA with in-column inputs can yield motions that have significantly longer duration compared to the true 3D site response solution due to trapped waves, casting in doubt the frequent need for increased soil damping in existing site studies to compensate for wave attenuation due to scattering alone. Sensitivity investigation on the increase of soil profile damping by a multiplier D mul shows D mul values compatible with those found in the literature for both horizontal and vertical motions. It is shown that the level of D mul optimized for a best match of the spectral acceleration is dependent on the characteristic of the input motion and a larger D mul is typically required for the vertical component. In contrast, 1D SRA with outcrop motions predicts motions with shorter significant duration due to its inability to capture the basin-edge generated surface waves. A suite of ground motion simulations was performed to assess the sensitivity of the observations to the basin geologic structure including the velocity gradient, rock-basin impedance contrast and basin depth. The analysis results show that the accuracy of the simplified 1D procedure is dependent on the wavefield composition of both the input motions and the true 3D site response solution. While the horizontal motions in shallow sedimentary basins can, to the first order, be reasonably captured by the simplified 1D approach, 1D SRA for the vertical component is in general not reliable and contributions from inclined shear waves should be accounted for in site-specific evaluation of the vertical design ground motion.

1D assumption↗

Universal time scalings of sensitivity in Markovian quantum metrology

Assuming Markovian time evolution of a quantum sensing system, we study the general characterization of the optimal sensitivity scalings with time, under most general quantum control protocols. We allow the estimated parameter to influence both the Hamiltonian as well as the dissipative part of the quantum master equation and focus on the asymptotic-time along with the short-time sensitivity scalings. We find that via simple algebraic conditions (in terms of the Hamiltonian, the jump operators as well as their parameter derivatives), one can characterize the four classes of metrological models that represent: quadratic-linear, quadratic-quadratic, linear-linear, and linear-quadratic time scalings. We also investigate the relevant time scales on which the transition between the two regimes appears. Additionally, we provide universal numerical methods to obtain quantitative bounds on sensitivity that are the tightest that exist in the literature. Simplicity and universality of our results make it suitable for diverse applications in quantum metrology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constraint energy minimizing generalized multiscale finite element method for multi-continuum Richards equations

In fluid flow simulation, the multi-continuum model is a useful strategy. When the heterogeneity and contrast of coefficients are high, the system becomes multiscale, and some kinds of reduced order methods are demanded. Combining these techniques with nonlinearity, we will consider in this paper a dual-continuum model which is generalized as a multi-continuum model for a coupled system of nonlinear Richards equations as unsaturated flows, in complex heterogeneous fractured porous media; and we will solve it by a novel multiscale approach utilizing the constraint energy minimizing generalized multiscale finite element method (CEM-GMsFEM). In particular, such a nonlinear system will be discretized in time and then linearized by Picard iteration (whose global convergence is proved theoretically). Subsequently, we tackle the resulting linearized equations by the CEM-GMsFEM and obtain proper offline multiscale basis functions to span the multiscale space (which contains the pressure solution). More specifically, we first introduce two new sources of samples, and the GMsFEM is used over each coarse block to build local auxiliary multiscale basis functions via solving local spectral problems, that are crucial for detecting high-contrast channels. Second, per oversampled coarse region, local multiscale basis functions are created through the CEM as constrainedly minimizing an energy functional. Various numerical tests for our approach reveal that the error converges with the coarse-grid size and that only few oversampling layers as well as basis functions are needed.

97 MATHEMATICS AND COMPUTING↗

Multi-level optimization with the koopman operator for data-driven, domain-aware, and dynamic system security

Cyber-Physical Systems (CPSs) like the power grid are critically important but also increasingly vulnerable; ensuring reliable system operation in the face of disruptions is becoming more and more challenging. Multi-Level Optimization (MLO) is a powerful way to model adversarial interactions, which naturally makes it applicable to studying CPS security. However, MLO typically does not address underlying system dynamics, and incorporating nonlinear dynamics is generally infeasible. In this paper, we show how to combine MLO with the Koopman Operator (KO) to remedy this. The KO maps nonlinear dynamics to a lifted space in which those dynamics are linear, thus making it ideal for use with MLO. Moreover, the structure of the KO also provides convenient ways to incorporate domain knowledge into the data-driven process of learning the KO representation of a given system. Here we then demonstrate the use of MLO-KO on a small example problem taken from the power grid domain, discuss the scalability and computational cost of MLO-KO, and identify future research directions for this work.

42 ENGINEERING↗

Reheating, multifield inflation and the fate of the primordial observables

We study the effects of perturbative reheating on the evolution of the curvature perturbation ζ, in two-field inflation models. We use numerical methods to explore the sensitivity of f{sub NL}, n{sub ζ} and r to the reheating process, and present simple qualitative arguments to explain our results. In general, if a large non-Gaussian signal exists at the start of reheating, it will remain non-zero at the end of reheating. Unless all isocurvature modes have completely decayed before the start of reheating, we find that the non-linearity parameter, f{sub NL}, can be sensitive to the reheating timescale, and that this dependence is most appreciable for 'runaway' inflationary potentials that only have a minimum in one direction. For potentials with a minimum in both directions, f{sub NL} can also be sensitive to reheating if a mild hierarchy exists between the decay rates of each field. Within the class of models studied, we find that the spectral index n{sub ζ}, is fairly insensitive to large changes in the field decay rates, indicating that n{sub ζ} is a more robust inflationary observable, unlike the non-linearity parameter f{sub NL}. Our results imply that the statistics of ζ, especially f{sub NL}, can only be reliably used to discriminate between models of two-field inflation if the physics of reheating are properly accounted for.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimal Power Flow of Radial Networks and Its Variations: A Sequential Convex Optimization Approach

This paper proposes a sequential convex optimization method to solve broader classes of optimal power flow (OPF) problems over radial networks. The non-convex branch power flow equation is decomposed as a second-order cone inequality and a non-convex constraint involving the difference of two convex functions. Provided with an initial solution offered by an inexact second-order cone programming relaxation model, this approach solves a sequence of convexified penalization problems, where concave terms are approximated by linear functions and updated in each iteration. It could recover a feasible power flow solution, which usually appears to be very close, if not equal, to the global optimal one. Two variations of the OPF problem, in which non-cost related objectives are optimized subject to power flow constraints and the convex relaxation is generally inexact, are elaborated in detail. One is the maximum loadability problem, which is formulated as a special OPF problem that seeks the maximal distance to the boundary of power flow insolvability. The proposed method is shown to outperform commercial nonlinear solvers in terms of robustness and efficiency. The other is the bi-objective OPF problem. A non-parametric scalarization model is suggested, and is further reformulated as an extended OPF problem by convexifying the objective function. It provides a single trade-off solution without any subjective preference. The proposed computation framework also helps retrieve the Pareto front of the bi-objective OPF via the e-constraint method or the normal boundary intersection method. This paper also discusses extensions for OPF problems over meshed networks based on the semidefinite programming relaxation method.

bi-objective optimization↗