Search NASA⌕ Search

SEARCH · Search NASA

Results for “INCUBATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

A Coupled Small and Wide-Angle X-Ray Scattering Study of Phase Transformation Mechanisms in U-6Wt Pct Nb

The elevated temperature phase transformation kinetics of U-6wt%Nb in both wrought and cast conditions were investigated using in-situ high energy synchrotron X-ray scattering. The evolution of the phase content, γ-phase composition, and microstructure morphology was determined through the analysis of simultaneously collected wide-angle diffraction and small-angle scattering (SAXS) data. The results of the wide-angle scattering analysis, especially the phase fractions and average composition of the γ-phase, provide model parameters to enable a quantitative analysis using the SAXS data. Greater clarity regarding the kinetics of different precipitation mechanisms, namely the continuous precipitation (CP) of α-U within the γ-phase matrix and the discontinuous (DP) grain boundary precipitation of a lamellar microstructure, consisting of α-U and Nb-rich γ-phase are obtained from the coupled measurement modes. These results indicate that the CP mechanism is responsible for the initial precipitation of α-U at all temperatures considered. Near the nose in the time-temperature-transformation (TTT) diagram at ~798 K, both mechanisms are active during the early stages of phase transformation. However, the DP mechanism has an increasingly long incubation period with decreasing temperature below the TTT nose. In conclusion, the average interlamellar spacing obtained from the SAXS analysis increases with time, providing further evidence of the so-called divergent DP behavior previously observed in U-6wt%Nb alloys.

36 MATERIALS SCIENCE↗

Immobilization of Candida antarctic Lipase B on Functionalized Ionic Liquid Modified MWNTs

Multiwalled carbon nanotubes (MWNTs) were modified by imidazole-based ionic liquids with different alkyl groups. The modified support samples were characterized by scanning transmission electron microscopy, Raman spectra, thermogravimetric analyses, and X-ray photoelectron spectroscopy. The samples were used to immobilize Candida antarctic lipase (CALB) and the influence of alkyl chain length of ionic liquids on enzymatic properties was investigated by the hydrolysis reaction of triacetin. The results revealed that functionalized ionic liquids modification did not destroy the structure of MWNTs. Compared with the immobilized CALB on MWNTs, the immobilized CALB on novel carriers all exhibited higher activity, thermal stability, and reusability. Especially, the activity of MWNTs-IL (8C)-CALB improved 15.23-folds than MWNTs-CALB, meanwhile, after incubation at 70 °C for 20 min, residual enzyme activity of MWNTs-IL (8C)-CALB was 46% of the initial activity, while MWNTs-CALB already lost all activity. Besides, MWNTs-IL (8C)-CALB retained 64.5% of its initial activity after 4 cycles, while MWNTs-CALB retained only 2.12%. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

GPTMS-Modified Bredigite/PHBV Nanofibrous Bone Scaffolds with Enhanced Mechanical and Biological Properties

Bioceramic nanoparticles with high specific surface area often tend to agglomerate in the polymer matrix, which results in undesirable mechanical properties of the composites and poor cell spreading and attachment. In the present work, bredigite (BR) nanoparticles were modified with an organosilane coupling agent, 3-glycidoxypropyltrimethoxysilane (GPTMS), to enhance its dispersibility in the polymer matrix. The polyhydroxybutyrate-co-hydroxyvaletare (PHBV) nanofibrous scaffolds containing either bredigite or GPTMS-modified bredigite (G-BR) nanoparticles were fabricated using electrospinning technique and characterized using scanning electron microscopy, transmission electron microscopy, and tensile strength. Results demonstrated that modification of bredigite was effective in enhancing nanoparticle dispersion in the PHBV matrix. PHBV/G-BR scaffold showed improved mechanical properties compared to PHBV and PHBV/BR, especially at the higher concentration of nanoparticles. In vitro bioactivity assay performed in the simulated body fluid (SBF) indicated that composite PHBV scaffolds were able to induce the formation of apatite deposits after incubation in SBF. From the results of in vitro biological assay, it is concluded that the synergetic effect of BR and GPTMS provided an enhanced hFob cells attachment and proliferation. The developed PHBV/G-BR nanofibrous scaffolds may be considered for application in bone tissue engineering.

60 APPLIED LIFE SCIENCES↗

Surgical wound fluids from patients treated with intraoperative radiotherapy induce radiobiological response in breast cancer cells

Breast cancer is the most common cancer occurring in women. The standard of breast cancer treatment is based on breast-conserving surgery with administration of adjuvant whole breast radiotherapy. Research shows that in-breast relapse is most likely to occur in the tumour bed, i.e. around the scar. Intraoperative radiotherapy (IORT), in which radiation is delivered to the tumour bed, reduces the risk of local recurrence not only through direct cell killing, but also through modification of local microenvironment. Additionally IORT modifies the composition and biological activity of surgical wound fluid. Since many researchers show that radiation damage is mediated through factors secreted to the environment by irradiated cells, we hypothesized that this radiation-induced bystander effect is partly responsible for the change observed in surgical wound fluids. We collected conditioned medium from irradiated breast cancer cells (CM) and surgical wound fluids from patients who underwent IORT (RT-WF) and from patients after breast-conserving surgery alone (WF). We incubated two breast cancer cell lines (MCF-7 and MDA-MB-468) with WF, RT-WF, CM or WF + CM and measured radiobiological response of cells. We measured the level of double-strand breaks, induction of apoptosis and the changes in expression of genes related to DNA damage repair. We observed that stimulation with RT-WF and with WF + CM-induced double-strand breaks and increased expression of DNA damage repair-related genes, which was not observed after stimulation with WF. These results suggest that IOERT induces secretion of bystander factors mediating the genotoxic effect of ionizing radiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Non-cardiac uptake of technetium-99m pyrophosphate in transthyretin cardiac amyloidosis

Background: Technetium-based bone scintigraphy is rapidly becoming the most common non-invasive imaging tool in the diagnosis of Transthyretin cardiac amyloidosis (ATTR). Skeletal muscle uptake has been described with technetium-99m-3,3-diphosphono-1,2-propanodicarboxylic acid (TcDPD), and may account for masking of bony uptake. We sought to investigate skeletal muscle uptake of technetium-99m-pyrophosphate (TcPYP) in patients with ATTR. Methods and Results: This was a retrospective analysis of 57 patients diagnosed with ATTR who underwent TcPYP scintigraphy. Cardiac uptake was assessed on whole-body planar imaging using a semiquantitative scale (grades 0 to 3) and on single-photon emission computed tomography (SPECT) with CT attenuation correction using total myocardial counts per voxel after a 3-hour incubation. Skeletal muscle (psoas and biceps), vertebral body, LV myocardium, and blood pool mean counts were calculated. In the cohort (age 78 ± 9 years, 77% male, and 30% hereditary ATTR), there was no visualized tracer uptake in skeletal muscle or soft tissue on qualitative SPECT assessment. Total and blood pool-corrected uptake in the muscle groups were significantly less than myocardium and bone (P < 0.001). Blood pool-corrected muscle uptake was not associated with semiquantitative grade 3 vs 2 uptake (psoas P = 0.66, biceps P = 0.13) or presence of hereditary ATTR (psoas P = 0.43, biceps P = 0.69). As bony uptake decreased, there was no corresponding increase in skeletal muscle uptake. Conclusions: In patients with ATTR cardiac amyloidosis, skeletal muscle uptake of TcPYP is minimal when assessed by qualitative and quantitative metrics, and is not significantly different in patients with grade 2 vs 3 semiquantitative uptake. The properties of this tracer may be different than TcDPD with respect to non-cardiac uptake.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Imaging of atherosclerosis, targeting LFA-1 on inflammatory cells with {sup 111}In-DANBIRT

Background: {sup 111}In-DOTA-butylamino-NorBIRT (DANBIRT) is a novel radioligand which binds to Leukocyte Function-associated Antigen-1 (LFA-1), expressed on inflammatory cells. This study evaluated {sup 111}In-DANBIRT for the visualization of atherosclerotic plaque inflammation in mice. Methods and Results: ApoE{sup −/−} mice, fed an atherogenic diet up to 20 weeks (n = 10), were imaged by SPECT/CT 3 hours post injection of {sup 111}In-DANBIRT (~ 200 pmol, ~ 40 MBq). Focal spots of {sup 111}In-DANBIRT were visible in the aortic arch of all animals, with an average Target-to-Background Ratio (TBR) of 1.7 ± 0.5. In vivo imaging results were validated by ex vivo SPECT/CT imaging, with a TBR up to 11.5 (range 2.6 to 11.5). Plaques, identified by Oil Red O lipid-staining on excised arteries, co-localized with {sup 111}In-DANBIRT uptake as determined by ex vivo autoradiography. Subsequent histological processing and in vitro autoradiography confirmed {sup 111}In-DANBIRT uptake at plaque areas containing CD68 expressing macrophages and LFA-1 expressing inflammatory cells. Ex vivo incubation of a human carotid endarterectomy specimen with {sup 111}In-DANBIRT (~ 950 nmol, ~ 190 MBq) for 2 hours showed heterogeneous plaque uptake on SPECT/CT, after which immunohistochemical analysis demonstrated co-localization of {sup 111}In-DANBIRT uptake and CD68 and LFA-1 expressing cells. Conclusions: Our results indicate the potential of radiolabeled DANBIRT as a relevant imaging radioligand for non-invasive evaluation of atherosclerotic inflammation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Folic acid-CdTe quantum dot conjugates and their applications for cancer cell targeting

In this study, we report the preparation,luminescence, and targeting properties of folic acid- CdTe quantum dot conjugates. Water-soluble CdTe quantum dots were synthesized and conjugated with folic acid using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide-N-hydroxysuccinimide chemistry. The in-fluence of folic acid on the luminescence properties of CdTe quantum dots was investigated, and no energy transfer between them was observed. To investigate the efficiency of folic acid-CdTe nanoconjugates for tumor targeting, pure CdTe quantum dots and folic acid-coated CdTe quantum dots were incubated with human naso- pharyngeal epidermal carcinoma cell line with positive expressing folic acid receptors (KB cells) and lung cancer cells without expression of folic acid receptors (A549 cells). For the cancer cells with positive folate receptors (KB cells), the uptake for CdTe quantum dots is very low, but for folic acid-CdTe nanoconjugates, the uptake is very high. For the lung cancer cells without folate receptors (A549 cells), the uptake for folic acid- CdTe nanoconjugates is also very low. The results indicate that folic acid is an effective targeting molecule for tumor cells with overexpressed folate receptors.

Suriamoorthy, Preethi↗

Matrix recrystallization for MALDI-MS imaging of maize lipids at high-spatial resolution

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Furthermore, using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a Magnetic Microbead Affinity Selection Screen (MagMASS) Using Mass Spectrometry for Ligands to the Retinoid X Receptor-α

To overcome limiting factors in mass spectrometry-based screening methods such as automation while still facilitating the screening of complex mixtures such as botanical extracts, magnetic microbead affinity selection screening (MagMASS) was developed. The screening process involves immobilization of a target protein on a magnetic microbead using a variety of possible chemistries, incubation with mixtures of molecules containing possible ligands, a washing step that removes non-bound compounds while a magnetic field retains the beads in the microtiter well, and an organic solvent release step followed by LC-MS analysis. Using retinoid X receptor-α (RXRα) as an example, which is a nuclear receptor and target for anti-inflammation therapy as well as cancer treatment and prevention, a MagMASS assay was developed and compared with an existing screening assay, pulsed ultrafiltration (PUF)-MS. Optimization of MagMASS involved evaluation of multiple protein constructs and several magnetic bead immobilization chemistries. The full-length RXRα construct immobilized with amylose beads provided optimum results. Additional enhancements of MagMASS were the application of 96-well plates to enable automation, use of UHPLC instead of HPLC for faster MS analyses, and application of metabolomics software for faster, automated data analysis. Performance of MagMASS was demonstrated using mixtures of synthetic compounds and known ligands spiked into botanical extracts. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Estimating the Efficiency of Phosphopeptide Identification by Tandem Mass Spectrometry

Mass spectrometry has played a significant role in the identification of unknown phosphoproteins and sites of phosphorylation in biological samples. Analyses of protein phosphorylation, particularly large scale phosphoproteomic experiments, have recently been enhanced by efficient enrichment, fast and accurate instrumentation, and better software, but challenges remain because of the low stoichiometry of phosphorylation and poor phosphopeptide ionization efficiency and fragmentation due to neutral loss. Phosphoproteomics has become an important dimension in systems biology studies, and it is essential to have efficient analytical tools to cover a broad range of signaling events. To evaluate current mass spectrometric performance, we present here a novel method to estimate the efficiency of phosphopeptide identification by tandem mass spectrometry. Phosphopeptides were directly isolated from whole plant cell extracts, dephosphorylated, and then incubated with one of three purified kinases—casein kinase II, mitogen-activated protein kinase 6, and SNF-related protein kinase 2.6—along with {sup 16}O{sub 4}- and {sup 18}O{sub 4}-ATP separately for in vitro kinase reactions. Phosphopeptides were enriched and analyzed by LC-MS. The phosphopeptide identification rate was estimated by comparing phosphopeptides identified by tandem mass spectrometry with phosphopeptide pairs generated by stable isotope labeled kinase reactions. Overall, we found that current high speed and high accuracy mass spectrometers can only identify 20%–40% of total phosphopeptides primarily due to relatively poor fragmentation, additional modifications, and low abundance, highlighting the urgent need for continuous efforts to improve phosphopeptide identification efficiency. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An Electrospray Ionization Mass Spectrometry Study on the “In Vacuo” Hetero-Oligomers Formed by the Antimicrobial Peptides, Surfactin and Gramicidin S

It was previously observed that the lipopeptide surfactants in surfactin (Srf) have an antagonistic action towards the highly potent antimicrobial cyclodecapeptide, gramicidin S (GS). This study reports on some of the molecular aspects of the antagonism as investigated through complementary electrospray ionization mass spectrometry techniques. We were able to detect stable 1:1 and 2:1 hetero-oligomers in a mixture of surfactin and gramicidin S. The noncovalent interaction between GS and Srf, with the proposed equilibrium: GS~Srf↔GS+Srf correlated to apparent K{sub d} values of 6–9 μM in gas-phase and 1 μM in aqueous solution. The apparent K{sub d} values decreased with a longer incubation time and indicated a slow oligomerization equilibrium. Furthermore, the low μM K{sub d}{sup app} values of GS~Srf↔GS+Srf fell within the biological concentration range and related to the 2- to 3-fold increase in [GS] needed for bacterial growth inhibition in the presence of Srf. Competition studies indicated that neither Na{sup +} nor Ca{sup 2+} had a major effect on the stability of preformed heterodimers and that GS in fact out-competed Ca{sup 2+} and Na{sup +} from Srf. Traveling wave ion mobility mass spectrometry revealed near symmetrical peaks of the heterodimers correlating to a compact dimer conformation that depend on specific interactions. Collision-induced dissociation studies indicated that the peptide interaction is most probably between one Orn residue in GS and the Asp residue, but not the Glu residue in Srf. We propose that flanking hydrophobic residues in both peptides stabilize the antagonistic and inactive peptide hetero-oligomers and shield the specific polar interactions in an aqueous environment. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reductive catalytic fractionation of cotton stalks: catalytic strategy for tuning the selectivity of phenolic monomers

Pretreatment of lignocellulosic biomass is a primary step to delink lignin from the lignin-carbohydrate complex for bioethanol production and other value-added products. Presently, these processes yield lignin (technical) with significant structural changes compared to native lignin and make it difficult to valorize. Reductive catalytic fractionation (RCF) is an advanced pretreatment process to valorize native lignin to selective phenolic monomers before capitalizing on carbohydrates. Herein, cotton stalks (CS) were pretreated with ethanol: water mixture catalyzed by bimetallic, Ru-Ni/HY (RNY) and Ru-Fe/HY (RFY), and trimetallic, Ru-Fe-Ni/HY (RFNY), catalysts using the endogenously produced H 2 . The favorable catalytic properties of the RFNY catalyst, including high reducibility, acidity, metal dispersion, the synergistic effect of all the metals, and appropriate pore and particle size resulted in the highest catalytic activity. Maximum 92% delignification efficiency was achieved with 91% holocellulose retention. The extracted lignin after depolymerization in the same step produced a 19 wt.% yield of phenolic monomers. Increasing the duration of the reaction from 2 to 6 h increased the selectivity to saturated alkyl chain phenolics (1 to 16 wt.%) at the expense of hemicellulose (50 to 9%). The fate of carbohydrates left behind after the RCF (CS-RCF) process was analyzed through enzymatic saccharification and compared with raw CS and acid-pretreated CS. In conclusion, CS-RCF yielded maximum glucose yield (45 g/L) within an incubation period of 72 h.

09 BIOMASS FUELS↗

Carbon mineralization and carbon dioxide emission from organic matter added soil under different temperature regimes

Purpose: Information on carbon dioxide (CO2) emission from different organic sources and their temperature sensitivity to decomposition is scarce in Bangladesh. Therefore, this study quantified the rates of CO2 emission and carbon (C) degradation constants from different organic material mixed soils at variable temperatures in two laboratory experiments. Methods: The first experiment was conducted at room temperature for 26 weeks to study CO2 emission and C mineralization using vermicompost, chicken manure, cow dung, rice straw, and rice husk biochar. Weekly CO2 emission was measured by alkali absorption followed by acid titration. The second experiment comprised two factors, viz. four organic materials (vermicompost, chicken manure, cow dung, and rice straw) and six temperature regimes (25, 30, 35, 40, 45, and 50 °C). Organic materials at 2.5 g C kg-1 soil were mixed in both experiments. Results: CO2 emission reached the peak at 5th weeks of incubation and then decreased with irregular fashion until 21st week. The C emission loss followed in the order of chicken manure > rice straw > vermicompost > cow dung > rice husk biochar, and C degradation constants indicated the slower decomposition of rice husk biochar compared to cow dung, vermicompost, chicken manure, and rice straw. Temperature positively enhanced the mineralization of organic materials in the order of 50 > 45 > 40 > 35 > 30 > 25 °C, which contributed to higher availability of soil phosphorus. Conclusions: High temperature increased mineralization of tested organic materials. Because of slower decomposition rice husk biochar, cow dung and vermicompost application can be considered as climate-smart soil management practices that might help in reducing CO2 emission from soil.

Hossain, Md. Babu (ORCID:0000000223536823)↗

Kinetics of Failure in an Elastic Peridynamic Material

The dynamic behavior of an elastic peridynamic material with a nonconvex bond potential is studied. In spite of the material’s inherently unstable nature, initial value problems can be solved using essentially the same techniques as with conventional materials, both analytically and numerically. In a suitably constructed material model, small perturbations grow exponentially over time until the material fails. Additionally, the time for this growth is computed explicitly for a stretching bar that passes from the stable to the unstable phase of the material model. This time to failure represents an incubation time for the nucleation of a crack. The finiteness of the failure time in effect creates a rate dependence in the failure properties of the material. Thus, the unstable nature of the elastic material leads to a rate effect even though it does not contain any terms that explicitly include a strain rate dependence.

36 MATERIALS SCIENCE↗

Enzyme interactions on lignocellulosic biomass structure

This chapter shows that, although well studied over the years, the cellulose enzymatic hydrolysis process has still many obstacles to be overcome or minimized. High enzyme loading and relatively long incubation periods are generally required for effective cellulose saccharification to be achieved. These limitations make the process unattractive from an economic perspective. Most studies show that the conversion rate of cellulose hydrolysis decreases over reaction time due to several factors that may inhibit, deactivate, or slow the work of enzymes. Some of these factors are inhibition by the product generated; inhibition/deactivation of enzymes by by-products generated during pretreatment (PT); limitation of mass transfer; shear stress by high stirring; air–liquid interfacial area; and unproductive adsorption on lignin or other compounds present in the biomass. The interaction between cellulases and the lignin present in these biomasses has a major negative impact on the process, with the source of the raw material and the type of PT used having a strong influence on it. Finally, the use of nonenzymatic proteins seems to be the best way to mitigate this problem.

20 FOSSIL-FUELED POWER PLANTS↗

Rapid preparation of nanodiscs for biophysical studies

Nanodiscs, which are disc-shaped entities that contain a central lipid bilayer encased by an annulus of amphipathic helices, have emerged as a leading native-like membrane mimic. The current approach for the formation of nanodiscs involves the creation of a mixed-micellar solution containing membrane scaffold protein, lipid, and detergent followed by a time consuming process (3–12 h) of dialysis and/or incubation with sorptive beads to remove the detergent molecules from the sample. In contrast, the methodology described herein provides a facile and rapid procedure for the preparation of nanodiscs in a matter of minutes (<15 min) using Sephadex® G-25 resin to remove the detergent from the sample. A panoply of biophysical techniques including analytical ultracentrifugation, dynamic light scattering, gel filtration chromatography, circular dichroism spectroscopy, and cryogenic electron microscopy were employed to unequivocally confirm that aggregates formed by this method are indeed nanodiscs. We believe that this method will be attractive for time-sensitive and high-throughput experiments.

59 BASIC BIOLOGICAL SCIENCES↗

Radiation instability of equal channel angular extruded T91 at ultra-high damage levels

Although several studies have shown that nano-grained alloys have higher radiation resistance than coarse-grained variants, with dense grain boundary structures acting as defect sinks to remove damage, the present study shows the failure of severe deformation to suppress void swelling in T91 alloy at ultra-high damage levels. Fe self-ion irradiation up to 1000 peak dpa produced significantly more swelling in extruded T91 than conventional T91 at 475 °C. Dramatic radiation-enhanced grain growth was observed in the extruded T91, manifested in two rapid grain growth stages. One stage occurs at a relatively low damage level, and the other at a higher damage level beyond 750 peak dpa. The second rapid growth stage is correlated with void swelling and starts at the end of the swelling incubation period. The study suggests that the defect sink properties of the growing grain boundaries under a coarsening process are different from that of stable boundary configurations. When void swelling becomes significant and voids act as a biased sink for vacancies, the growing grain boundaries act as a biased sink for interstitials, leading to rapid growth at higher damage levels.

36 MATERIALS SCIENCE↗

Oxide nucleation via threshold-driven volume instability in Ni oxidation

Oxide nucleation dictates the onset of metal oxidation, yet the atomistic pathways bridging initial oxygen adsorption to bulk phase transformation remain elusive. Here, we utilize in-situ atomic-resolution imaging to directly capture the nucleation of nickel oxide, revealing a threshold-driven, cooperative transformation of Ni into NiO. Our observations identify a distinct incubation period during which oxygen progressively accumulates in subsurface layers. Once a critical concentration and penetration depth are reached, a collective lattice reconfiguration is triggered, abruptly converting multiple Ni layers into NiO. Atomistic simulations corroborate this mechanism, identifying a cooperative lattice instability induced by subsurface oxygen saturation. These results establish subsurface oxygen incorporation as the missing mechanistic link between surface adsorption and three-dimensional oxide formation, providing an atomistic framework to understand and control reactive phase transformations in materials synthesis, catalysis, and degradation.

36 MATERIALS SCIENCE↗