Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large eddy simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Load response of a floating wind turbine to turbulent atmospheric flow

The two turbulence-generation models [Kaimal Spectrum Exponential Coherence (KSEC) and Mann] specified in the international standard for wind turbine design assume neutral atmospheric conditions and are based on statistical and spectral methods. Mainly due to the lack of physics, the flow fields simulated with these models ultimately differ in their underlying structure, especially in terms of the spatial coherence of longitudinal velocity perturbations. While this may not be critical for smaller wind turbine rotors, it becomes important when rotor sizes increase. Furthermore, it might be especially important in the context of floating technologies as they are more sensitive to large turbulent coherent structures. Previous work found that these differences between KSEC and Mann can propagate to loads predictions and thereby affect the design space of the entire wind turbine system. It is therefore crucial to determine in which ways these two models are underperforming. Up until now, validation of these models had only been done in the vertical direction because it is extremely difficult to obtain atmospheric turbulence measurements separated laterally, and sampled at heights relevant to wind energy. In this work, we address the lack of measurements by using high-fidelity, high-resolution simulation data as a reference. We perform hour-long, large-eddy simulations of turbulent velocity fields that are stability-dependent and contain three-dimensional coherent structures. These flow fields are then used to investigate which stochastic model is a better predictor of loads on a realistic spar-system floating offshore wind turbine, and to quantify how the assumption of neutral stratification propagates to short-term load estimates. Both stochastic turbulence models are found to overpredict fatigue loading in high-wind scenarios (in some cases, by more than 25%) and underpredict it when the wind speed is low (by as much as 20%). The KSEC model matches the high-fidelity flow fields more closely than Mann at high wind speeds, and the opposite is true at low wind speeds. Finally, turbine loading is found to be sensitive to atmospheric stability even when the turbulence intensity remains fairly constant. This sensitivity is most pronounced at low wind speeds, when fatigue load estimates on the spar system can differ by 40%.

17 WIND ENERGY↗

Assessing the Atmospheric Response to Subgrid Surface Heterogeneity in the Single-Column Community Earth System Model, Version 2 (CESM2)

Land-atmosphere interactions are central to the evolution of the atmospheric boundary layer and the subsequent formation of clouds and precipitation. Existing global climate models represent these connections with bulk approximations on coarse spatial scales, but observations suggest that small-scale variations in surface characteristics and co-located turbulent and momentum fluxes can significantly impact the atmosphere. Recent model development efforts have attempted to capture this phenomenon by coupling existing representations of subgrid-scale (SGS) heterogeneity between land and atmosphere models. Such approaches are in their infancy and it is not yet clear if they can produce a realistic atmospheric response to surface heterogeneity. Here, we implement a parameterization to capture the effects of SGS heterogeneity in the Community Earth System Model (CESM2), and compare single-column simulations against high-resolution Weather Research and Forecasting (WRF) large-eddy simulations (LESs), which we use as a proxy for observations. The CESM2 experiments increase the temperature and humidity variances in the lowest atmospheric levels, but the response is weaker than in WRF-LES. In part, this is attributed to an underestimate of surface heterogeneity in the land model due to a lack of SGS meteorology, a separation between deep and shallow convection schemes in the atmosphere, and a lack of explicitly represented mesoscale secondary circulations. These results highlight the complex processes involved in capturing the effects of SGS heterogeneity and suggest the need for parameterizations that communicate their influence not only at the surface but also vertically.

54 ENVIRONMENTAL SCIENCES↗

Terrain-Influenced Winds and Fire-Fire Interactions in Wildland Fire Simulations [Dissertation]

Ensemble-based approaches to prescribed fire planning cannot be supported by computational fluid dynamics based models like FIRETEC and the Wildland-Urban Interface Fire Dynamics Simulator (WFDS) because they are too computationally expensive and cannot leverage large eddy simulation approaches like CAWFE and WRF-SFIRE because they have too coarse of resolution. QUIC-Fire was developed to fill this gap but it cannot currently address complex terrain, that is typical for instance in the Western United States. This dissertation describes a variety of improvements made to QUIC-Fire and its various incorporated algorithms in an effort to make it a viable tool in simulating wildland and prescribed fires on terrain. The modifications made to QUIC-Fire are described in three chapters. The first chapter describes the extension of the diagnostic wind model QUIC-URB, the wind engine of QUIC-Fire, to a terrain-following coordinate system. The terraininfluenced winds it generates are analyzed and compared. In particular, this chapter presents the mathematical derivation of the wind solver leading to a linear system of equations that are solved through the successive over-relaxation method. The model is validated against a standard test used in previous works (the Askervein Hill) and against a new dataset from measurements in the Socorro Mountains, New Mexico. The terrain-following implementation captures the correct phenomenology for the isolated Askervein Hill, with a wind speed up at the top of the hill. The model agrees well with measurements on the upwind side of the peak, but overestimates speed-up on the downwind side of the hill. This is due to the inability of the model to generate flow separation and wake-eddy dynamics. On a common laptop, the divergence-free wind field is obtained in 6 s, making the solver appealing for coupled fire-atmosphere simulations. The Socorro Mountain is highly complex, with many cliff faces, peaks, and valleys. Although the model captures the magnitude and direction of inlet and outlet areas of the domain, it performs rather poorly in the valley region and in the regions near the steep cliffs. Hence, the model shows good agreement with data in areas of open sloped terrain but lacks in areas where flow separation and thermally driven effects may be present (neither effect is addressed in this work). In the second chapter the implementation of the terrain-following version of QUIC-URB into QUIC-Fire, and the necessary changes needed to include terrain are described. No changes to the underlying fire spread algorithm are made other than what is required to correctly account for the inclusion of terrain. Previously published FIRETEC results that use five different topographies that share the same centerline profile are compared to simulation results from the modified QUIC-Fire that use the same topographies and fuels. QUIC-Fire results show overall similar behaviors in terms of how the topographies affect fire shapes and trends in spread rates. Due to the terrain-following version of QUIC-URB being unable to generate flow separations at the crest of hills, fire spread rates in these regions across all topographies are over-predicted when compared to FIRETEC. Lateral fire growth shows similar trends with FIRETEC between topographies but does not capture the increase in spread due to a diagonal interface between grassland and forested fuel region of the domain. These results suggest that there are three algorithms within QUIC-Fire that could use improvement: how flame tilt angle is accounted for, the incorporation of non-local drag effects, and the inclusion of the wake-eddy parameterizations that are used in QUIC-URB. Lastly, the third chapter describes a modification to the initial guess used for the calculation of the QUIC-URB mass-conserved wind solution during fire simulations. The modification is aimed at improving fire-fire interactions in QUIC-Fire simulations. The modification consists of using the solution from the previous timestep as the starting point for the calculation of the solution for the next timestep. Fire-fire interactions is greatly improved by the change but a new source of error is introduced. Due to how plumes are modelled in QUIC-Fire the new solution contains errors where gaps in the plume structure are present. However, these errors are mostly limited to the upper atmosphere, where they do not affect fire behavior at the surface, and their magnitude isn’t significant enough to discount the amount of new fire phenomenology now captured in QUIC-Fire with the change.

58 GEOSCIENCES↗

LES ARM Symbiotic Simulation and Observation (LASSO) Implementation Strategy

This document illustrates the design of the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) workflow to provide a routine, high-resolution modeling capability to augment the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s high-density observations. LASSO will create a powerful new capability for furthering ARM’s mission to advance understanding of cloud, radiation, aerosol, and land-surface processes. The combined observational and modeling elements will enable a new level of scientific inquiry by connecting processes and context to observations and providing needed statistics for details that cannot be measured. The result will be improved process understanding that facilitates concomitant improvements in climate model parameterizations. The initial LASSO implementation will be for ARM’s Southern Great Plains site in Oklahoma and will focus on shallow convection, which is poorly simulated by climate models due in part to clouds’ typically small spatial scale compared to model grid spacing, and because the convection involves complicated interactions of microphysical and boundary layer processes.

Gustafson Jr., WI↗

On the simulation of shock-driven material mixing in high-Re flows (u)

Implicit large eddy simulation proposes to effectively rely on the use of subgrid modeling and filtering provided implicitly by physics capturing numerics. Extensive work has demonstrated that predictive simulations of turbulent velocity fields are possible using a class of high resolution, non-oscillatory finite-volume (NFV) numerical algorithms. Truncation terms associated with NFV methods implicitly provide subgrid models capable of emulating the physical dynamics of the unresolved turbulent velocity fluctuations by themselves. The extension of the approach to the substantially more difficult problem of under-resolved material mixing by an under-resolved velocity field has not yet been investigated numerically, nor are there any theories as to when the methodology may be expected to be successful. Progress in addressing these issues in studies of shock-driven scalar mixing driven by Ritchmyer-Meshkov instabilities will be reported in the context of ongoing simulations of shock-tube laboratory experiments.

42 ENGINEERING↗

Importance of turbulence-chemistry interactions at low temperature engine conditions

The role of turbulence-chemistry interaction in autoignition and flame stabilization is investigated for spray flames at low temperature combustion (LTC) conditions by performing high-fidelity three-dimensional computational fluid dynamics (CFD) simulations. A recently developed Tabulated Flamelet Model (TFM) is coupled with a large eddy simulation (LES) framework and validated across a range of Engine Combustion Network (ECN) ambient temperature conditions for n-dodecane fuel. High resolution grids with 0.0625 mm minimum cell size and 25 million total cell count are implemented using adaptive mesh refinement over the spray and combustion regions. Simulations with these grids and multiple LES realizations, with a 103 species n-dodecane mechanism show good agreement with experimental data for all the ambient conditions investigated. This modeling approach with the computational cost advantage of tabulated chemistry is then extended towards understanding the auto-ignition and flame stabilization at an ambient temperature of 750 K. These low temperature conditions lead to substantially higher ignition delays and flame liftoff lengths, and significantly leaner combustion compared to conventional high temperature diesel combustion. These conditions also require the simulations to span significantly larger temporal and spatial dimensions thereby increasing the computational cost. The TFM approach is able to capture autoignition and flame liftoff length at the low temperature conditions. Significant differences with respect to mixing, species formation and flame stabilization are observed under low temperature compared to conventional diesel combustion. At higher ambient temperatures, formation of formaldehyde is observed in the rich region (phi > 1) followed by the formation of OH in the stoichiometric regions. Under low temperature conditions, formaldehyde is observed to form at leaner regions followed by the onset of OH formation in significantly lean regions of the flame. Qualitative differences between species formation and transient flame development for the high and low temperature conditions are presented. The two stage ignition process is further investigated by studying the species formation in mixture fraction space by solving 1D flamelet equations for different scalar dissipation rates and homogeneous reactor assumption. Results show that scalar dissipation causes these radicals to diffuse within the mixture fraction space. As a result, this significantly enhances ignition and plays a dominant role at such low temperature conditions which cannot be captured by the homogeneous reaction assumption based model.

33 ADVANCED PROPULSION SYSTEMS↗

Recent progress on coarse graining simulations

We focus on coarse graining simulations based on the primary conservation equations, effectively codesigned physics and algorithms, and low-Mach-number corrected (LMC) hydrodynamics. Simulation methods involve LANL’s x-Radiation-Adaptive-Grid-Eulerian Large-Eddy Simulation, Besnard-Harlow-Rauenzahn (BHR) Reynolds-Averaged Navier-Stokes (RANS) approach, and Dynamic BHR – a paradigm bridging RANS and LES. A relevant question addressed relates to whether 3D RANS and RANS/LES hybrids – the industry standards for aerospace and automotive research, are presently relevant for practical variable-density applications involving shocked and accelerated interface instabilities. Furthermore, recent simulations of the GaTECH inclined mixing-layer shock-tube and NIF ICF-capsule experiments are used to demonstrate issues, challenges, and potential for 3D coarse grained LMC simulation strategies for robustly simulating complex transitional and coupled hydrodynamics-multiphysics with coarser resolution. Present LES readiness to provide accurate predictions at scale is demonstrated – whereas 3D RANS and RANS/LES bridging do not appear impactful in this context.

42 ENGINEERING↗

Langmuir turbulence and filament frontogenesis in the oceanic surface boundary layer

Submesoscale currents, small-scale turbulence and surface gravity waves co-exist in the upper ocean and interact in complex ways. To expose the couplings, the frontogenetic life cycle of an idealized cold dense submesoscale filament interacting with upper ocean Langmuir turbulence is investigated in large-eddy simulations (LESs) based on the incompressible wave-averaged equations. The simulations utilize large domains and fine meshes with $6.4\times 10^{9}$ grid points. Case studies are made with surface winds or surface cooling with waves oriented in across-filament (perpendicular) or down-filament (parallel) directions relative to the two-dimensional filament axis. The currents $u$ , $v$ and $w$ are aligned with the across-filament, down-filament and vertical directions, respectively. Frontogenesis is induced by across-filament Lagrangian secondary circulations in the boundary layer, and it is shown to be strongly impacted by surface waves, in particular the propagation direction relative to the filament axis. In a horizontally heterogeneous boundary layer, surface waves induce both mean and fluctuating Stokes-drift vortex forces that modify a linear, hydrostatic turbulent thermal wind (TTW) approximation for momentum. Down-filament winds and waves are found to be especially impactful, they significantly reduce the peak level of frontogenesis by fragmenting the filament into primary and secondary down-welling sites in a broad frontal zone over a width ${\sim}500~\text{m}$ . At peak frontogenesis, opposing down-filament jets $\langle v\rangle$ overlie each other resulting in a vigorous vertical shear layer $\unicode[STIX]{x2202}_{z}\langle v\rangle$ with large vertical momentum flux $\langle v^{\prime }w^{\prime }\rangle$ . Filament arrest is induced by a lateral shear instability that generates horizontal momentum flux $\langle u^{\prime }v^{\prime }\rangle$ at low wavenumbers. The turbulent vertical velocity patterns, indicative of coherent Langmuir cells, change markedly across the horizontal domain with both across-filament and down-filament winds under the action of submesoscale currents.

Mechanics↗

Wind Turbine Wakes

The total energy produced by a wind farm depends on the complex interaction of many wind turbines operating in proximity with the turbulent atmosphere. Sometimes, the unsteady forces associated with wind negatively influence power production, causing damage and increasing the cost of producing energy associated with wind power. Wakes and the motion of air generated by rotating blades need to be better understood. Predicting wakes and other wind forces could lead to more effective wind turbine designs and farm layouts, thereby reducing the cost of energy, allowing the United States to increase the installed capacity of wind energy. The Wind Energy Technologies Department at Sandia has collaborated with the University of Minnesota to simulate the interaction of multiple wind turbines. By combining the validated, large-eddy simulation code with Sandia’s HPC capability, this consortium has improved its ability to predict unsteady forces and the electrical power generated by an array of wind turbines. The array of wind turbines simulated were specifically those at the Sandia Scaled Wind Farm Testbed (SWiFT) site which aided the design of new wind turbine blades being manufactured as part of the National Rotor Testbed project with the Department of Energy.

17 WIND ENERGY↗

Idealized simulations of wind farm interactions with intermittent turbulence in stable boundary layer conditions

Stable atmospheric boundary layer conditions typically correspond to weak turbulence levels, but intermittent periods of elevated turbulence can occur during otherwise quiescent conditions. The interaction between intermittent turbulence and wind turbines is not well understood because of sparse observations, as well as the difficulty in realistically resolving small-scale turbulence during strongly stable conditions with numerical simulations. In this study, an explicit filtering and reconstruction approach for large-eddy simulation (LES) is used to simulate weakly and strongly stable conditions, with surface cooling rates of −0.2 and −2.0 K h −1 , respectively. This approach can sustain resolved background turbulence at relatively coarse grid spacing and stronger stratification compared to conventional closures, permitting more realistic intermittent stable boundary layer (SBL) turbulence. The idealized LES capability of the Weather Research and Forecasting model is employed with turbine rotors parameterized using generalized actuator disks to examine (1) how the presence of turbine wakes affects SBL evolution and (2) the effect of intermittent turbulence on power production and wake recovery. Wakes increase mixing and deepen the SBL, with a stronger effect under strongly stable conditions, primarily because the SBL is shallower and closer to the top of the wind turbine rotor layer. Intermittent turbulence does not have a significant impact on mean power generation and wake recovery because the relevant intermittent turbulent structures in this study only affect the bottom half of the rotor disk. Power production is, however, more variable during periods of elevated turbulence, demonstrating the impact of SBL intermittency. This study uses an idealized configuration, focusing on LES model performance and physical understanding, with the goal of informing future simulations of the conditions observed during the American Wake Experiment.

Energy - Wind↗

Investigating the interactions between wakes and floating wind turbines using FAST.Farm

As floating offshore wind progresses to commercial maturity, wake and array effects across a farm of floating offshore wind turbines (FOWTs) will become increasingly important. While wakes of land-based and bottom-fixed offshore wind turbines have been extensively studied, only recently has this topic become relevant for floating turbines. This work presents an investigation of the mutual interaction between the motions of floating wind turbines and wakes using FAST.Farm. While FAST.Farm has been extensively validated across a wide range of conditions, it has never been validated for FOWT applications. Hence, in the first part of this work, we validate FAST.Farm by comparing simulations of a single FOWT against high-fidelity results from large-eddy simulations available in the literature. The validation is based on wake meandering, mean wake deflection, and velocity deficit at different downstream locations. This validation showed that the original axisymmetric (polar) wake model of FAST.Farm overpredicts the vertical wake deflection induced by shaft tilt and floater pitch, while the new curled wake model is capable of properly capturing the vertical wake deflection. In the second part, we use FAST.Farm to analyze a small three-unit array of FOWTs with a spacing of 7 diameters across a wide range of environmental conditions. The same National Renewable Energy Laboratory 5 MW reference wind turbine atop the OC4-DeepCwind semisubmersible is adopted for the three FOWTs and for the validation against high-fidelity simulations. To assess the effect of the floating substructure, we compare the power production, tower-base moments, and blade-root moments obtained for the floating turbines with the results obtained in a fixed-bottom configuration. The main differences introduced by the floating substructure are the motions induced by the waves, the change in the natural frequencies of the tower caused by differences in the boundary condition at its base, and the larger vertical deflection of the wake deficit due to the mean pitch of the platform. The impact of these differences, as well as other minor effects, are analyzed in detail.

16 TIDAL AND WAVE POWER↗

Exposing and Reducing Biases of Simulating Mixed-Phase Clouds in the Convection-Permitting E3SM Atmosphere Model: Lessons From an Arctic Cold-Air Outbreak

Mixed-phase clouds modulate the water and energy cycles of high-latitude regions, yet their liquid-ice phase partitioning has long been poorly simulated in climate models. Here, simulations of Arctic mixed-phase clouds by the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) are assessed against large-eddy simulations, satellite data, and ground-based observations during the Cold-Air Outbreaks in the Marine Boundary Layer Experiment field campaign. SCREAM simulates nearly completely frozen clouds, which is attributed largely to the unreasonably strong Wegener–Bergeron–Findeisen (WBF) process that converts liquid to ice excessively and partly to the early over-abundant ice production at cold temperatures from a temperature-deterministic deposition ice nucleation scheme. Assuming no subgrid variation for the WBF process in the original formulation particularly conflicts with the instantaneous saturation adjustment assumption in the condensation scheme that assumes subgrid variability, leading to exaggerated WBF process rates. A proposed simple physically-based improvement on the treatment of subgrid cloud overlap substantially increases supercooled liquid water content and notably improves cloud-top phase partitioning, aligning better with observations. Improvement of supercooled liquid water content also converges with increasing horizontal resolution. The deposition ice nucleation scheme is found responsible for a falsely-produced ice cloud aloft that is not observed, biasing the simulated cloud radiative effects and top-of-atmosphere radiative fluxes. This study identifies key deficiencies in cloud parameterizations that continue to challenge convection-permitting models.

Geosciences↗

The KPP Boundary Layer Scheme for the Ocean: Revisiting Its Formulation and Benchmarking One‐Dimensional Simulations Relative to LES

Abstract We evaluate the Community ocean Vertical Mixing project version of the K‐profile parameterization (KPP) for modeling upper ocean turbulent mixing. For this purpose, one‐dimensional KPP simulations are compared across a suite of oceanographically relevant regimes against horizontally averaged large eddy simulations (LESs). We find the standard configuration of KPP consistent with LES across many forcing regimes, supporting its physical basis. Our evaluation also motivates recommendations for KPP best practices within ocean circulation models and identifies areas where further research is warranted. The original treatment of KPP recommends the matching of interior diffusivities and their gradients to the KPP‐predicted values computed in the ocean surface boundary layer (OSBL). However, we find that difficulties in representing derivatives of rapidly changing diffusivities near the base of the OSBL can lead to loss of simulation fidelity. To mitigate this difficulty, we propose and evaluate two computationally simpler approaches: (1) match to the internal predicted diffusivity alone and (2) set the KPP diffusivity to 0 at the OSBL base. We find the KPP entrainment buoyancy flux to be sensitive to vertical grid resolution and details of how to diagnose the KPP boundary layer depth. We modify the KPP turbulent shear velocity parameterization to reduce resolution dependence. Additionally, an examination of LES vertical turbulent scalar flux budgets shows that the KPP‐parameterized nonlocal tracer flux is incomplete due to the assumption that it solely redistributes the surface tracer flux. This result motivates further studies of the nonlocal flux parameterization.

54 ENVIRONMENTAL SCIENCES↗

A Model Intercomparison Study to Investigate Mixing Characteristics in Non‐Precipitating Stratocumulus Clouds

Recent aircraft observations of marine stratocumulus clouds consistently showed that cloud microphysical relationships vary with altitude, indicating inhomogeneous mixing characteristics near cloud top and homogeneous mixing characteristics in mid-levels of clouds. Here, we conduct model intercomparison of an idealized, non-precipitating stratocumulus cloud to evaluate model consistency and examine whether simulations can reproduce the observed mixing characteristics. The results show that eleven large-eddy simulations with various dynamics and microphysics schemes show good agreement on the thermodynamical, microphysical, and dynamical properties of the stratocumulus-topped boundary layer in a steady state. The inter-model spread in steady-state liquid water path is significantly reduced compared to previous model intercomparison studies. This improvement might be due to better models and more consistent initial conditions than those used decades ago. In addition, most simulations, including a low-dimensional simulation, capture inhomogeneous mixing characteristics near the cloud top and homogeneous mixing characteristics inside the cloud. Moreover, simulations using Lagrangian microphysics schemes agree better with the observed mixing characteristics compared with those using the bin microphysics schemes. Since most simulations do not fully resolve the entrainment process, the apparent mixing characteristics arise from the variations in the resolved cloud properties. Our results support the vertical circulation mixing hypothesis, which suggests that homogeneous mixing characteristics in mid-levels of clouds are due to the vertical circulation of entrainment-affected and diluted parcels from the cloud top moved to lower levels.

54 ENVIRONMENTAL SCIENCES↗

Modeling of Water Film Formation on a Stay-Cable

With the increasing popularity of cable-stayed bridges in the past few decades, longer spans are being constructed using ever-longer stay cables. Under certain conditions, especially during construction, and wind and rain-wind events, the cables of cable-stayed bridges may undergo large amplitude vibrations. This type of vibration has been of concern to researchers and engineers because large amplitude vibration can induce excessive stresses and therefore threaten the safety and integrity of bridge structures. Figure 1-1 presents an example of a stay cable bridge structure, The Cooper River Bridge. Many countermeasures for the wind-rain induced vibrations have been developed to decrease the amplitude of the vibrations and consequently, the fatigue of the cables. One of the methods is to install helical fillets on the cable surface. A sketch of a cable with two fillets wrapped around it is shown in Figure 1-2. The main objective of the present study is to develop and test computational methodologies, with the use of computational fluid dynamics (CFD), that model the interaction of rain with stay cables including: the formation of water film, development of rainwater rivulets, and rivulet behavior under various conditions with and without wind. Interaction of water with cables with and without fillets is analyzed, and results are presented in this report. This study is divided into two parts. The first part of this study, Section 4, explores methods of modeling water film formation and flow on cables. A series of simulations using the Reynolds averaged Navier-Stokes equations turbulence model (RANS) and large eddy simulation (LES) model are performed to analyze water film formation and flow on a cable using the fluid film model in STARCCM+ [(b)1]. Various methods of setting up initial and boundary conditions are tested, especially boundary conditions for introducing rain into the domain. The second part of the study, Section 5, explores upper rivulet formation in the presence of wind, based on the findings from the first part of the study. In that section, LES simulation with the Volume Of Fluid model for the free surface is used. Also, various results for cases with and without water film on the cable are presented and compared.

42 ENGINEERING↗

Effect of Surface Roughness on Dynamic Stall in Pitching Motion

Dynamic stall plays a critical role in determining the performance and stability of a wide range of fluid-dynamics systems in various engineering applications. This unsteady aerodynamic phenomenon is particularly significant for maneuvering aircraft wings, jet aircraft subjected to gust encounters, helicopter rotor blades, and wind turbine blades [1–3]. The prediction of the dynamic stall vortex (DSV) is challenging due to factors such as unsteady aerodynamics, three-dimensional (3-D) effects, turbulence and flow separation, incoming gust, and surface impact effects [4–6]. Hence, advanced computational techniques and modeling approaches in computational fluid dynamics (CFD) would be required to enhance the accuracy and reliability of DSV predictions in dynamic stall scenarios. In the past, Batther and Lee [7] employed delayed detached eddy simulations (DDES) to understand the flow physics associated with the onset of dynamic stall. Their approach demonstrated that DDES achieves results comparable to those obtained from large-eddy simulations at a reduced computational cost. In another study, Khalifa et al. [8] examined the 3-D aspects of dynamic stall on a NACA 0012 airfoil using DES solvers. In conclusion, the findings underlined the superiority of 3-D simulations over two-dimensional approaches, particularly in predicting the lift coefficient values and capturing dynamic stall stages more precisely.

97 MATHEMATICS AND COMPUTING↗

A performance analysis of ensemble averaging for high fidelity turbulence simulations at the strong scaling limit

We analyze the potential performance benefits of estimating expected quantities in large eddy simulations of turbulent flows using true ensembles rather than ergodic time averaging. Multiple realizations of the same flow are simulated in parallel, using slightly perturbed initial conditions to create unique instantaneous evolutions of the flow field. Each realization is then used to calculate statistical quantities. Provided each instance is sufficiently de-correlated, this approach potentially allows considerable reduction in the time to solution beyond the strong scaling limit for a given accuracy. This study focuses on the theory and implementation of the methodology in Nek5000, a massively parallel open-source spectral element code.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SYSTEMATIC MULTI-INDEX VALIDATIONS OF SIDI ENGINE FLOW FIELD LES COMPUTATIONS USING CRANK ANGLE-RESOLVED PIV MEASUREMENTS

In-cylinder flow fields make significant impacts on the fuel atomization, fuel mixture formation, and combustion process in spark ignition direct injection (SIDI) engines. In recent years, model-based simulation approaches are preferred in regard to investigating the transient in-cylinder flow field characteristics. Most commonly, the simulation models are validated using single representative flow field at a typical crank angle measured by particle image velocimetry (PIV). However, it provides only limited knowledge about the flow field which is highly three-dimensional and of transient nature. In this study, crank angle-resolved Ply measurements are conducted on three distinct planes inside the cylinder to capture the transient process of flow field characteristics which vary with the crank angle. These three planes consist of one tumble plane through the spark plug tip, one tumble plane along two intake ports, and one swirl plane at 30 mm below the cylinder head. Large eddy simulation (LES) is employed for the numerical computations using the CONVERGE codes. On the basis of large datasets for both temporal and spatial domains, a multi-index systematic validation approach is conducted. Crank angle-resolved calculations of global indices and local indices are implemented using the flow fields velocity data obtained from both PIV and LES on select planes. Global indices reveal the trends in similarities of different crank angle degrees and locations, while local indices give the detail comparison results. In summary, with the systematic multi-index validation approach, the crucial crank angle degrees and locations for model verification will be detected. Furthermore, the corresponding critical flow features are analyzed. Practical guideline of flow field validation is proposed.

Crank angle-resolved PIV↗