Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Evaluation of tibolone administration in bone architectural by MicroCT

Elderly women are at higher risk for hip fracture because of additional and relatively rapid bone loss due to estrogen deficiency by loss of the ovarian function and a longer average life span than men. The early application of agents that suppress the increase in bone turnover due to estrogen deficiency is essential to prevent bone loss and reduce the risk of osteoporosis. Some advanced imaging techniques may be required to investigate osteoporosis. X-ray micro-computed tomography has been used to generate high-resolution 3D images of cancellous and cortical bone morphology from normal and pathologic human and animal specimens. The aim of this study is to verify the effects of tibolone administration by evaluating the trabecular bone region. The experiment was performed on two groups of rats previously ovariectomized in which one received tibolone while the other did not. Tibolone administration (1 mg/day) began thirty days after the ovariectomy and the treatment remained for five months. At last, the animals were euthanized and femurs were collected. The scan was obtained using a Hamamatsu 10 Mp camera with a pixel size of 11.59 {mu}m and trabecular region in the right femoral head were quantified. All results were statistically evaluated with significance set at P<0.05%. Tibolone administration was shown to be beneficial in some analysis of the femoral head, performing higher bone volume and reducing the porosity when compared to ovariectomized. It can be concluded that tibolone administered to ovariectomized rats significantly preserved bone mass in the femoral head and microtomography was an efficient method to identify bone loss process and to evaluate potential therapies, as tibolone administration. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Regulation of translation by ribosomal RNA pseudouridylation

Pseudouridine is enriched in ribosomal, spliceosomal, transfer, and messenger RNA and thus integral to the central dogma. The chemical basis for how pseudouridine affects the molecular apparatus such as ribosome, however, remains elusive owing to the lack of structures without this natural modification. Here, we studied the translation of a hypopseudouridylated ribosome initiated by the internal ribosome entry site (IRES) elements. We analyzed eight cryo–electron microscopy structures of the ribosome bound with the Taura syndrome virus IRES in multiple functional states. We found widespread loss of pseudouridine-mediated interactions through water and long-range base pairings. In the presence of the translocase, eukaryotic elongation factor 2, and guanosine 5'-triphosphate hydrolysis, the hypopseudouridylated ribosome favors a rare unconducive conformation for decoding that is partially recouped in the ribosome population that remains modified at the P-site uridine. The structural principles learned establish the link between functional defects and modification loss and are likely applicable to other pseudouridine-associated processes.

59 BASIC BIOLOGICAL SCIENCES↗

AC Loss Measurements on a 2G YBCO Coil

The Oak Ridge National Laboratory (ORNL) is collaborating with Waukesha Electric Systems (WES) to continue development of HTS power transformers. For compatibility with the existing power grid, a commercially viable HTS transformer will have to operate at high voltages in the range of 138 kV and above, and will have to withstand 550-kV impulse voltages as well. Second-generation (2G) YBCO coated conductors will be required for an economically-competitive design. In order to adequately size the refrigeration system for these transformers, the ac loss of these HTS coils must be characterized. Electrical AC loss measurements were conducted on a prototype high voltage (HV) coil with co-wound stainless steel at 60 Hz in a liquid nitrogen bath using a lock-in amplifier technique. The prototype HV coil consisted of 26 continuous (without splice) single pancake coils concentrically centered on a stainless steel former. For ac loss measurement purposes, voltage tap pairs were soldered across each set of two single pancake coils so that a total of 13 separate voltage measurements could be made across the entire length of the coil. AC loss measurements were taken as a function of ac excitation current. Results show that the loss is primarily concentrated at the ends of the coil where the operating fraction of critical current is the highest and show a distinct difference in current scaling of the losses between low current and high current regimes.

36 MATERIALS SCIENCE↗

Formation of a Stabilized Cysteine Sulfinic Acid Is Critical for the Mitochondrial Function of the Parkinsonism Protein DJ-1

The formation of cysteine-sulfinic acid has recently become appreciated as a modification that links protein function to cellular oxidative status. Human DJ-1, a protein associated with inherited parkinsonism, readily forms cysteine-sulfinic acid at a conserved cysteine residue (Cys{sup 106} in human DJ-1). Mutation of Cys{sup 106} causes the protein to lose its normal protective function in cell culture and model organisms. However, it is unknown whether the loss of DJ-1 protective function in these mutants is due to the absence of Cys{sup 106} oxidation or the absence of the cysteine residue itself. To address this question, we designed a series of substitutions at a proximal glutamic acid residue (Glu{sup 18}) in human DJ-1 that alter the oxidative propensity of Cys{sup 106} through changes in hydrogen bonding. We show that two mutations, E18N and E18Q, allow Cys{sup 106} to be oxidized to Cys{sup 106}-sulfinic acid under mild conditions. In contrast, the E18D mutation stabilizes a cysteine-sulfenic acid that is readily reduced to the thiol in solution and in vivo. We show that E18N and E18Q can both partially substitute for wild-type DJ-1 using mitochondrial fission and cell viability assays. In contrast, the oxidatively impaired E18D mutant behaves as an inactive C106A mutant and fails to protect cells. We therefore conclude that formation of Cys{sup 106}-sulfinic acid is a key modification that regulates the protective function of DJ-1.

08 HYDROGEN↗

Characterization of Gramicidin A in Triblock and Diblock Polymersomes and Hybrid Vesicles via Continuous Wave Electron Paramagnetic Resonance Spectroscopy

Studying membrane proteins in a native environment is crucial to understanding their structural and/or functional studies. Often, widely accepted mimetic systems have limitations that prevent the study of some membrane proteins. Micelles, bicelles, and liposomes are common biomimetic systems but have problems with membrane compatibility, limited lipid composition, and heterogeneity. To overcome these limitations, polymersomes and hybrid vesicles have become popular alternatives. Polymersomes form from amphiphilic triblock or diblock copolymers and are considered more robust than liposomes. Hybrid vesicles are a combination of lipids and block copolymers that form vesicles composed of a mixture of the two. These hybrid vesicles are appealing because they have the native lipid environment of bilayers but also the stability and customizability of polymersomes. Gramicidin A was incorporated into these polymersomes and characterized using continuous wave electron paramagnetic resonance (CW-EPR) and transmission electron microscopy (TEM). EPR spectroscopy is a powerful biophysical technique used to study the structure and dynamic properties of membrane proteins in their native environment. Spectroscopic studies of gramicidin A have been limited to liposomes; in this study, the membrane peptide is studied in both polymersomes and hybrid vesicles using CW-EPR spectroscopy. Lineshape analysis of spin-labeled gramicidin A revealed linewidth broadening, suggesting that the thicker polymersome membranes restrict the motion of the spin label more when compared to liposome membranes. Statement of Significance: Understanding membrane proteins’ structures and functions is critical in the study of many diseases. In order to study them in a native environment, membrane mimetics must be developed that can be suitable for obtaining superior biophysical data quality to characterize structural dynamics while maintaining their native functions and structures. Many currently widely accepted methods have limitations, such as a loss of native structure and function, heterogeneous vesicle formation, restricted lipid types for the vesicle formation for many proteins, and experimental artifacts, which leaves rooms for the development of new biomembrane mimetics. The triblock and diblock polymersomes and hybrid versicles utilized in this study may overcome these limitations and provide the stability and customizability of polymersomes, keeping the biocompatibility and functionality of liposomes for EPR studies of membrane proteins.

59 BASIC BIOLOGICAL SCIENCES↗

BEAM (Battery Ensemble ANN Modeler) [SWR-19-69]

Dynamic losses of batteries can be a nonlinear function of the operational state of the battery. This package trains an Ensemble of Artificial Neural Networks on battery operational data to model the dynamic losses as a function of the operational state of charge and the active power set point. The package can also be used to return the dynamic battery losses which will be incurred as the battery operates if fed some operational profile.

Bryce, Richard↗

Radiation effects in single-walled carbon nanotube papers

The effects of ionizing radiation on the temperature-dependent conductivity of single-walled carbon nanotube (SWCNT) papers have been investigated in situ in a high vacuum environment. Irradiation of the SWCNT papers with 4.2 MeV alpha particles results in a steady decrease in the SWCNT paper conductivity, resulting in a 25% reduction in room temperature conductivity after a fluence of 3x10{sup 12} alpha particles/cm{sup 2}. The radiation-induced temperature-dependent conductivity modification indicates that radiation damage causes an increase in the effective activation barrier for tunneling-like conductivity and a concomitant increase in wavefunction localization of charge carriers within individual SWCNTs. The spatial defect generation within the SWCNT paper was modeled and confirms that a uniform displacement damage dose was imparted to the paper. This allows the damage coefficient (i.e., differential change in conductivity with fluence) for alpha particles, carbon ions, and protons to be compared with the corresponding nonionizing energy loss (NIEL) of the incident particle. The resulting nonlinear relationship with NIEL between these parameters is distinct from the more typical linear response observed in many bulk semiconductors and superconductors and indicates that localized radiation damage in the SWCNT papers has a greater impact than distributed damage. Although SWCNT papers behave largely as a bulk material with properties that are a convolution of the underlying SWCNT distribution, the radiation response appears to be largely dominated by degradation in the preferred one-dimensional conduction within these two-dimensionally confined nanostructures.

36 MATERIALS SCIENCE↗

Wafer-scale waveguide sidewall roughness scattering loss characterization by image processing

Photonic integrated circuits (PICs) are vital for developing affordable, high-performance optoelectronic devices that can be manufactured at an industrial scale, driving innovation and efficiency in various applications. Optical loss of modes in thin film waveguides and devices is a critical measure of their performance. Thin film growth, lithography, masking, and etching processes are imperfect processes that introduce significant sidewall and top-surface roughness and cause dominating optical losses in waveguides and photonic structures. This roughness, as perturbations couple light from guided to far-field radiation modes, leads to scattering losses that can be estimated from theoretical models. Typically, with UV-based lithography, sidewall roughness is significantly larger than wafer-top surface roughness. Atomic force microscopy (AFM) imaging measurement gives a 3D and high-resolution roughness profile, but the measurement is inconvenient, costly, and unscalable for large-scale PICs and at wafer-scale. Here, we evaluate the sidewall roughness profile based on 2D high-resolution scanning electron microscope (SEM) imaging. We characterized the loss on two homemade nitride and oxide films on 3-inch silicon wafers with 12 waveguide devices on each and correlated the scattering loss estimated from a 2D image-based sidewall profile and theoretical Payne model. The lowest loss of guided fundamental transverse electric (TE 0 ) mode is found at 0.075 dB/cm at 633 nm across 24 devices, a record at visible wavelength. Our work shows 100% success (edge continuity span exceeding 95% of image width/height) in edge detection in image processing of all images to estimate autocorrelation function and optical mode loss. These demonstrations offer valuable insights into waveguide sidewall roughness and a comparison of experimental and 2D SEM image processing based loss estimations with applications in loss characterization at wafer-scale PICs.

Khurana, Mohit (ORCID:0000000207898672)↗

Measuring fusion excitation functions with RIBs: A thorough analysis of the stacked target technique and the related problems

The use of the stacked target technique to measure fusion cross-sections of reactions induced by low intensity radioactive beams offers considerable advantages since several reaction energies may be simultaneously measured. The main disadvantage of the method is the degradation of the beam quality as it passes through the stack due to statistical nature of energy loss processes and any non-uniformity of the stacked targets. This degradation can lead to ambiguities of associating effective beam energies to reaction product yields for the targets within the stack. A detailed investigation of these ambiguities has been performed and some of the obtained results are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quark energy loss in semi-inclusive deep inelastic scattering of leptons on nuclei

Semi-inclusive deep inelastic scattering on nuclear targets is an ideal tool to study the energy loss effect of an outgoing quark in a nuclear medium. By means of the short hadron formation time, the experimental data with quark hadronization occurring outside the nucleus are picked out. A leading-order analysis is performed for the hadron multiplicity ratios as a function of the energy fraction on helium, neon, and copper nuclei relative to deuteron for the various identified hadrons. It is shown that the nuclear effects on parton distribution functions can be neglected. It is found that the theoretical results considering the nuclear modification of fragmentation functions due to quark energy loss are in good agreement with the experimental data. Whether the quark energy loss is linear or quadratic with the path length is not determined. The obtained energy loss per unit length is 0.38+-0.03 GeV/fm for an outgoing quark by the global fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE DUST ENVIRONMENT OF COMET 29P/SCHWASSMANN-WACHMANN 1 FROM DUST TAIL MODELING OF 2004 NEAR-PERIHELION OBSERVATIONS

A Monte Carlo inverse dust tail modeling of ground-based images of comet 29P/Schwasssmann-Wachmann 1 has been performed. The images of the comet were acquired on several nights in 2004 July, a few days after the 2004 perihelion passage. The analysis takes into account the rotation properties of the comet, incorporating dust ejection from active areas on the nucleus surface. We demonstrate that these models provide a significant improvement over models with a fixed sunward hemispherical particle emission cone, owing to the observed coma asymmetry, giving an excellent fit to the observed intensity isophote fields. The rotation parameters, defined by the argument of the subsolar meridian at perihelion, {phi}, and the obliquity, I, are found to be compatible with those derived by Sekanina from morphological studies ({phi} = 279 deg. and I = 100 deg.). We found that if dust emission is assumed to be produced by a single active area driven by insolation, this must then be located on the southern hemisphere near -35{sup 0} latitude. We have devised a method to impose Af{rho}(t) constraints the overdetermined system of equations leading to the solution of the dust mass loss rates and size distribution function. When those constraints are applied, the time-averaged particle size distribution function was found to be characterized by a power law of index in the range -3.7 to -3.3, and a dust loss mass rate approximately in the nominal range of 300-900 kg s{sup -1}, depending on the different model approaches, and for an albedo time the phase function of 0.1, confirming the fact that this comet is perhaps the most active source of interplanetary dust, providing some 3%-10% of the mass required to replenish the losses of the interplanetary dust cloud if it is in a steady state.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of homolog doping on surface morphology and mass-loss rates from PETN crystals. Studies using atomic force microscope and thermo-gravimetric analysis

Pentaerythritol tetranitrate (PETN) is an important energetic material and its performance as a secondary explosive depends strongly on the density as well as flow porosity of powdered material, which in turn is governed by the size and surface properties of the PETN crystallite particles. Historically there has been evidence that the surface properties of PETN particles can be strongly influenced by the presence of homolog impurities of PETN, in particular, dipentaerythritol hexanitrate (diPEHN) and tripentaerythritol octanitrate (triPEON), although not many systematic studies characterizing such influence exist. In this work we employ thermogravimetric analysis (TGA) to measure mass-loss rates at elevated temperatures and show that doping with a small amount of diPEHN and triPEON can reduce the mass-loss rate from PETN single-crystal surfaces by as much as 35 % as compared to undoped crystals. Arrhenius plots of mass-loss rates as a function of temperature suggest that the reduction in evaporation is not due to the change in activation barrier of the molecular evaporation process, but perhaps due to the impedance to the receding motion of the steps by the immobile impurities on the surface. Removal of surface impurities through gentle washing with ethanol leads to enhanced mass-loss rate relative to pure PETN suggesting a roughened surface morphology. Some surface roughening in doped crystals is supported by Atomic force microscopy (AFM) images of growth layers that show evidences of growth layer stacking and rough edges. Furthermore, we find that a larger amount of impurity added to the original solution does not necessarily lead to a more highly doped crystal, which could perhaps be interpreted as PETN crystals being able to accommodate only up to a certain weight percent of homolog impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mass scaling laws due to isotopic effects in the energy loss of He{sup 2+} colliding with H, D, and T

Total, electronic, and nuclear energy loss as well as stopping cross sections are calculated for He{sup 2+} ions incident on atomic hydrogen, deuterium, and tritium at low to intermediate energies by means of an ab initio, nonadiabatic approach for solving the Schroedinger equation incorporating coupled electron and nuclear dynamics. Comparison of this ab initio treatment with classical nuclear stopping cross-section formulations obtained from Coulomb and screened potential models, and an ab initio theory, allows us to deduce scaling laws that incorporate the different target masses (target isotopic effect). We provide a discussion on the range of validity of the use of classical trajectories. We verify that the nuclear energy loss is a universal function of the center-of-mass (c.m.) scattering angle. The scattering angle in the c.m. system shows a dependence on the projectile charge due to a strong isotopic effect on the charge-transfer cross section. In the case of a Coulombic interaction, that dependence disappears, and leads to a formulation based only on the c.m. collision energy for the nuclear stopping cross section. Due to the small electron capture cross section for He{sup 2+} on H, D, and T in the low-energy region, it is shown that the effective charge model that assumes neutralization of the projectile does not apply to the energy loss of He{sup 2+} ions in the calculation of stopping cross sections. Thus, for this system, there is no influence of the charge exchange isotope effect of the target in the nuclear stopping cross section of the projectile. In the electronic energy loss, such an isotopic effect is present through Stueckelberg oscillations, but its contribution is small. Furthermore, the electronic stopping cross section shows a threshold effect that results from the minimum momentum transfer necessary to produce an electronic excitation in the target. Finally, the nuclear stopping cross section has a universal behavior as a function of the c.m. collision energy, and care must be taken when comparing ionic systems stopping cross-section results to those of neutral systems as obtained by effective charge models.

74 ATOMIC AND MOLECULAR PHYSICS↗

Epigenetic down-regulated DDX10 promotes cell proliferation through Akt/NF-κB pathway in ovarian cancer

Ovarian cancer contributes to the majority of ovarian cancer, while the molecular mechanisms remain elusive. Recently, some DEAD box protein 1 has been reported play a tumor suppressor role in ovarian cancer progression. However, the functions of DEAD box protein (DDX) members in ovarian cancer development remain largely unknown. In current study, we retrieved GEO databases and surprisingly found that DDX10 is significantly down-regulated in ovarian cancer tissues compared with normal ovary. These findings suggest that DDX10 might also play a suppressive role in ovarian cancer. We then validated the down-regulated expression pattern of DDX10 in fresh ovarian cancer tissues. Furthermore, both loss- and gain-functions assays reveal that the down-regulated DDX10 could promote ovarian cancer proliferation in vitro and the xenograft subcutaneous tumor formation assays confirmed these findings in vivo. In addition, we found that DDX10 is epigenetic silenced by miR-155-5p in ovarian cancer. Moreover, we further preliminary illustrated that down-regulated DDX10 promotes ovarian cancer cell proliferation through Akt/NF-κB pathway. Taken together, in current study, we found a novel tumor suppressor, DDX10, is epigenetic silenced by miR-155-5p in ovarian cancer, and the down-regulated expression pattern of DDX10 promotes ovarian cancer proliferation through Akt/NF-κB pathway. Our findings shed the light that DDX families might be a novel for ovarian cancer treatment. - Highlights: • A novel DEAD box protein, DDX10 is significantly down-regulated in ovarian cancer tissues. • Down-regulated DDX10 promotes ovarian cancer cell proliferation and growth both in vitro and in vivo. • miR-155-5p is highly expressed in ovarian cancer tissues and epigenetically targets DDX10. • DDX10 and miR-155-5p regulates Akt/p65 axis in ovarian cancer cells.

60 APPLIED LIFE SCIENCES↗

Accelerating molecular property calculations with nonorthonormal Krylov space methods

Here, we formulate Krylov space methods for large eigenvalue problems and linear equation systems that take advantage of decreasing residual norms to reduce the cost of matrix-vector multiplication. The residuals are used as subspace basis without prior orthonormalization, which leads to generalized eigenvalue problems or linear equation systems on the Krylov space. These nonorthonormal Krylov space (nKs) algorithms are favorable for large matrices with irregular sparsity patterns whose elements are computed on the fly, because fewer operations are necessary as the residual norm decreases as compared to the conventional method, while errors in the desired eigenpairs and solution vectors remain small. We consider real symmetric and symplectic eigenvalue problems as well as linear equation systems and Sylvester equations as they appear in configuration interaction and response theory. The nKs method can be implemented in existing electronic structure codes with minor modifications and yields speed-ups of 1.2-1.8 in typical time-dependent Hartree-Fock and density functional applications without accuracy loss. The algorithm can compute entire linear subspaces simultaneously which benefits electronic spectra and force constant calculations requiring many eigenpairs or solution vectors. The nKs approach is related to difference density methods in electronic ground state calculations, and particularly efficient for integral direct computations of exchange-type contractions. By combination with resolution-of-the-identity methods for Coulomb contractions, three- to fivefold speed-ups of hybrid time-dependent density functional excited state and response calculations are achieved.

74 ATOMIC AND MOLECULAR PHYSICS↗

Life Cost Based FMEA Manual: A Step by Step Guide to Carrying Out a Cost-based Failure Modes and Effects Analysis

Failure occurs when one or more of the intended functions of a product are no longer fulfilled to the customer's satisfaction. The most critical product failures are those that escape design reviews and in-house quality inspection and are found by the customer. The product may work for a while until its performance degrades to an unacceptable level or it may have not worked even before customer took possession of the product. The end results of failures which may lead to unsafe conditions or major losses of the main function are rated high in severity. Failure Modes and Effects Analysis (FMEA) is a tool widely used in the automotive, aerospace, and electronics industries to identify, prioritize, and eliminate known potential failures, problems, and errors from systems under design, before the product is released (Stamatis, 1997). Several industrial FMEA standards such as those published by the Society of Automotive Engineers, US Department of Defense, and the Automotive Industry Action Group employ the Risk Priority Number (RPN) to measure risk and severity of failures. The Risk Priority Number (RPN) is a product of 3 indices: Occurrence (O), Severity (S), and Detection (D). In a traditional FMEA process design engineers typically analyze the 'root cause' and 'end-effects' of potential failures in a sub-system or component and assign penalty points through the O, S, D values to each failure. The analysis is organized around categories called failure modes, which link the causes and effects of failures. A few actions are taken upon completing the FMEA worksheet. The RPN column generally will identify the high-risk areas. The idea of performing FMEA is to eliminate or reduce known and potential failures before they reach the customers. Thus, a plan of action must be in place for the next task. Not all failures can be resolved during the product development cycle, thus prioritization of actions must be made within the design group. One definition of detection difficulty (D) is how well the organization controls the development process. Another definition relates to the detectability of a particular failure in the product when it is in the hands of the customer. The former asks 'What is the chance of catching the problem before we give it to the customer'? The latter asks 'What is the chance of the customer catching the problem before the problem results in a catastrophic failure?' (Palady, 1995) These differing definitions confuse the FMEA users when one tries to determine detection difficulty. Are we trying to measure how easy it is to detect where a failure has occurred or when it has occurred? Or are we trying to measure how easy or difficult it is to prevent failures? Ordinal scale variables are used to rank-order industries such as, hotels, restaurants, and movies (Note that a 4 star hotel is not necessarily twice as good as a 2 star hotel). Ordinal values preserve rank in a group of items, but the distance between the values cannot be measured since a distance function does not exist. Thus, the product or sum of ordinal variables loses its rank since each parameter has different scales. The RPN is a product of 3 independent ordinal variables, it can indicate that some failure types are 'worse' than others, but give no quantitative indication of their relative effects. To resolve the ambiguity of measuring detection difficulty and the irrational logic of multiplying 3 ordinal indices, a new methodology was created to overcome these shortcomings, Life Cost-Based FMEA. Life Cost-Based FMEA measures failure/risk in terms of monetary cost. Cost is a universal parameter that can be easily related to severity by engineers and others. Thus, failure cost can be estimated using the following simplest form: Expected Failure Cost = {sup n}{Sigma}{sub i=1}p{sub i}c{sub i}, p: Probability of a particular failure occurring; c: Monetary cost associated with that particular failure; and n: Total number of failure scenarios. FMEA is most effective when there are inputs into it from all concerned disciplines of the product development team. However, FMEA is a long process and can become tedious and won't be effective if too many people participate. An ideal team should have 3 to 4 people from: design, manufacturing, and service departments if possible. Depending on how complex the system is, the entire process can take anywhere from one to four weeks working full time. Thus, it is important to agree to the time commitment before starting the analysis else, anxious managers might stop the procedure before it is completed.

97 MATHEMATICS AND COMPUTING↗

Relation of Observable Stellar Parameters to Mass-loss Rate of AGB Stars in the LMC

Using the data set of Riebel et al. for 6889 pulsating AGB stars in the LMC, we have derived formulae for mass-loss rate as a function of luminosity and pulsation period, or luminosity and mass, in three ways, for each of five subsets of data: fundamental-mode oxygen-rich stars, first-overtone-mode oxygen-rich stars, fundamental-mode carbon stars, first-overtone-mode carbon stars, and extreme carbon stars. Using the distribution of the stars in period versus luminosity and mass versus luminosity, we are able to derive a power-law fit to the dependence of mass-loss rate on those quantities. This results in formulae that reproduce observed mass-loss rates and are in general agreement with the expectation from mass-loss models that the mass-loss rate is highly sensitive to luminosity, mass, and pulsation period. In the process of carrying out this analysis we have found radius–mass–luminosity relations and examined pulsation–mass–radius relations using published evolutionary and pulsation models. These allow us to derive mass and radius from the observed quantities luminosity and pulsation period. We also derived new mass-loss rate versus color relations.

79 ASTRONOMY AND ASTROPHYSICS↗

Systematic comparison of jet energy-loss schemes in a realistic hydrodynamic medium

We perform a systematic comparison of three different jet energy-loss approaches. These include the Armesto-Salgado-Wiedemann scheme based on the approach of Baier-Dokshitzer-Mueller-Peigne-Schiff and Zakharov (BDMPS-Z/ASW), the higher twist (HT) approach and a scheme based on the Arnold-Moore-Yaffe (AMY) approach. In this comparison, an identical medium evolution will be utilized for all three approaches: this entails not only the use of the same realistic three-dimensional relativistic fluid dynamics (RFD) simulation, but also the use of identical initial parton-distribution functions and final fragmentation functions. We are, thus, in a unique position to not only isolate fundamental differences between the various approaches but also make rigorous calculations for different experimental measurements using state of the art components. All three approaches are reduced to versions containing only one free tunable parameter, this is then related to the well-known transport parameter q. We find that the parameters of all three calculations can be adjusted to provide a good description of inclusive data on R{sub AA} vs transverse momentum. However, we do observe slight differences in their predictions for the centrality and azimuthal angular dependence of R{sub AA} vs p{sub T}. We also note that the values of the transport coefficient q in the three approaches to describe the data differ significantly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗