Search NASA⌕ Search

SEARCH · Search NASA

Results for “Main”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Functional characteristics of the OGO main body airglow photometer

The OGO-4 main body airglow photometer used a trialkali cathode photomultiplier to sense light at selected wavelengths between 2500 and 6300A corresponding to important emissions in the aurora and night airglow at emission rates ranging from a few rayleighs to about 200 kilorayleighs. The optical, electronic, and mechanical systems are described in terms of their functional characteristics.

Reed, E. I.↗

Possibility that the far ultraviolet excess in M31 is due to main sequence stars

The far ultraviolet excess in the central region of M31, observed by OAO-2, could be due to young main sequence stars. More than enough such stars are present in the model for the M31 inner disk population derived by Tinsley and Spinrad (1971) to match line- and color-indices at longer wavelengths. If the far ultraviolet radiation of typical galaxies arises from young stars, the theoretical ultraviolet background is enhanced greatly by evolutionary effects. For evolution at the rate of Tinsley and Spinrad's model for M31, or of Arnett's (1971) linear model for our galaxy, the enhancement is a factor 2.5 to 14, depending on the Hubble constant and the spectrum at wavelengths below 1700 A.

Tinsley, B. M.↗

Apollo 15 main-parachute failure

In the investigation of the failure of one of the three main parachutes of the Apollo 15 spacecraft, which collapsed at approximately 1825 meters after operating properly from deployment at 3050 meters, three conditions considered to be possible causes of the failure were produced. The suspect conditions were the proximity of the forward heat shield that passed the spacecraft at approximately 1825 meters, the dumping of the reaction control system hypergolic propellants at approximately 1825 meters, and the failing of a riser link found on a recovered parachute. (The failed parachute was not recovered). The remaining two parachutes functioned as planned and averted a catastrophic failure. The conclusions concerning the cause of the failure are discussed.

Arabian, D. D.↗

Maintainability of the Space Shuttle Orbiter main engine.

Review of the long-life and minimum-turnaround-maintenance features in the design of the Space Shuttle Orbiter main engine aimed at reducing the latter's field operating costs. These features include the regeneratively cooled hot-gas system selected, the provision of additional fatigue margins in the design of rotating machinery elements, and employment of a proven approach to engine condition monitoring for fault detection and identification.

Goe, R. T.↗

Intrinsic ultraviolet colors from OAO-2 Celescope observations for stars on the main sequence.

Intrinsic ultraviolet colors (Vi-V)o have been determined with ultraviolet magnitudes derived from several hundred observations taken with the photometers of OAO-2's Celescope experiment. Relationships between intrinsic ultraviolet color, (B-V)o, and spectral class are presented for main-sequence stars from B 0 to G 3. A brief description of the Celescope and its calibration is included, and a comparison of the determined colors is made with theoretical colors.

Haramundanis, K.↗

The ultraviolet flux envelopes of main-sequence B stars.

Flux envelopes in the range from 1100 to 6000 A for representative, nearby, thus unreddened main sequence stars are assembled. These envelopes are compared with the flux envelopes predicted from the classical LTE theory of model atmospheres. An investigation is conducted concerning the UV spectral distributions in the case of stars of the types B 0.5 V to A 1 V. It is found that the observed UV flux envelopes fall significantly below the envelopes predicted from lightly line-blanketed models.

Underhill, A. B.↗

Transient rotordynamic analysis for the space-shuttle main engine high-pressure oxygen turbopump

A simulation study was conducted to examine the transient rotordynamics of the space shuttle main engine (SSME) high pressure oxygen turbopump (HPOTP) with the objective of identifying, anticipating, and avoiding rotordynamic problem areas. Simulations were performed for steady state operations at emergency power levels and for critical speed transitions. No problems are indicated in steady state operation of the HPOTP emergency power levels, although the results indicated that a rubbing condition will be experienced during critical speed transition at shutdown, particularly involving rotor deceleration rate and imbalance distribution rubbing at the turbine floating-ring seals. The condition is correctable by either reducing the imbalance at the HPOTP hot gas turbine wheels, or by a more rapid deceleration of the rotor through it critical speed.

Childs, D. W.↗

Space Shuttle Main Engine control system

The Space Shuttle Main Engine is a reusable, high-performance rocket engine being developed by the Rocketdyne Div. of Rockwell International to satisfy the operational requirements of the Space Shuttle Orbiter Vehicle. The design incorporates a hydraulically actuated, closed-loop servosystem controlled and monitored by a programmable electronic digital controller. The controller accepts vehicle commands for the various engine operational phases, positions the appropriate valves, monitors the engine for the required performance precisions and conditions, and provides redundancy management.

Seitz, P. F.↗

Space Shuttle Main Engine program status

Performance, weight, and reusability of the Space Shuttle Main Engine, the next generation rocket engine, are important factors in achieving the Space Shuttle mission. The design features of the engine contributing to the achievement of these engine demands are discussed. Many new fabrication methods, material applications, and innovations incorporated into the engine are presented. The engine program is now in the second year of the 47 months development period. The current status of activities in engineering, manufacturing, and test are reviewed. The Design Verification Specification approach to engine development is compared to the development programs for Saturn/Apollo engines.

Kirby, F. M.↗

Condition monitoring helps make the Space Shuttle Main Engine reusable

The Space Shuttle Main Engine (SSME) is a reusable, high-performance liquid-propellant rocket engine being developed for the Space Shuttle Orbiter Vehicle. The SSME has been designed for long life, rapid postflight maintenance, and a fast vehicle turnaround cycle of 160 hours. To meet the unique reusability requirements, the SSME considers maintainability and condition monitoring much as airlines do today. The condition monitoring capabilities designed into this engine are discussed with major emphasis on internal inspection and techniques which ensure the reusability of the SSME.

Lacroix, W. P.↗

The Space Shuttle Main Engine and its maintenance features

The Space Shuttle Main Engine (SSME) is a reusable, high-performance rocket engine being developed to satisfy the performance, life, reliability, and operational requirements of the Space Shuttle Orbiter. The design includes simple, low-cost maintenance features resulting from a viable maintainability program dedicated to minimizing engine cost per flight.

Wheelock, V. J.↗

The Space Shuttle Main Engine

The Space Shuttle Main Engine is the highest performance large rocket engine being developed in the world. This engine will be used to put the Space Shuttle orbiter vehicle into earth orbit and will be the workhorse propulsion system of the 1970s and 1980s. The propulsion requirements demand maximum performance from the liquid oxygen/hydrogen propellants with a minimum hardware weight. The system is being developed at low cost with a required early flight schedule of 1978. The engine system and components are based on the latest technology using advanced materials and high-pressure combustion. Engine weight and performance are discussed. This paper describes engine design, the program and present progress, the technology of advanced components, experimental results, and development areas underway.

Sanchini, D. J.↗

A 20000-hour endurance test of a structurally and thermally integrated 5-cm diameter ion thruster main cathode

A 5-cm diameter mercury ion thruster main cathode has completed over 20,000 hours of operation in an ongoing lifetime endurance test. The cathode operating parameters remained at acceptable performance levels throughout the test, the first 9175 hours of which were part of a thruster endurance test. After 20,000 hours, the cathode discharge was easily restarted, the tip orifice indicated negligible erosion and the tip heater showed no degradation. The cathode-isolator- vaporizer assembly, a major thruster subsystem, has thus successfully demonstrated an operational lifetime capability of 20,000 hours, which is the lifetime goal of the 8-cm diameter auxiliary propulsion ion thruster.

Wintucky, E. G.↗

Main memory unit

The development of a main memory unit (MMU) for the space ultrareliable module computer (SUMC) model HTC is discussed. The design, fabrication, and test of basic memory modules (BMM) which were to be used in the design and construction of the MMU are described. The BMM was designed from state-of-the-art technologies which included large scale integration devices mounted and interconnected on a substrate to form a functional module to be utilized in the MMU development. A SUMC memory system design study is discussed which addressed itself to the BMM design and analysis to be conducted to determine the most efficient organization of the BMM in order to establish such modularity features as: word length expandability without redesign, high reliability, and fault tolerance. One MMU was designed, fabricated, tested, and delivered which will be electrical and mechanically compatible with the hybrid technology computer (HTC) model of the SUMC family of computers. The MMU will contain a storage capacity of 8196 36 bit words which includes a parity bit for each 8 bit byte of data.

Source record↗

Main sequence models for massive zero-metal stars

Zero-age main-sequence models for stars of 20, 10, 5, and 2 solar masses with no heavy elements are constructed for three different possible primordial helium abundances: Y=0.00, Y=0.23, and Y=0.30. The latter two values of Y bracket the range of primordial helium abundances cited by Wagoner. With the exceptions of the two 20 solar mass models that contain helium, these models are found to be self-consistent in the sense that the formation of carbon through the triple-alpha process during premain sequence contraction is not sufficient to bring the CN cycle into competition with the proton-proton chain on the ZAMS. The zero-metal models of the present study have higher surface and central temperatures, higher central densities, smaller radii, and smaller convective cores than do the population I models with the same masses.

Cary, N.↗

The Apsidal-motion test for models of main-sequence stars

Apsidal-motion constants, k2, have been determined for models of homogeneous main-sequence stars constructed with the new 'Thomas-Fermi' opacities of Carson. These models are similar to those constructed with the 'hydrogenic' opacities of Cox and Stewart up to about 7 solar masses, but yield smaller values of k2 at higher masses. Nevertheless, the new theoretical constants are still systematically too large compared with most of the empirical constants known for members of well-observed binary systems. Uniform rotation is found to lower the theoretical constants only slightly. The effect of normal evolution during core hydrogen burning, however, produces good detailed agreement with observations. The primary of alpha Vir is probably evolving normally if Carson's opacities are adopted.

Stothers, R.↗