Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Global terrestrial nitrogen fixation and its modification by agriculture

Biological nitrogen fixation (BNF) is the largest natural source of new nitrogen (N) that supports terrestrial productivity, yet estimates of global terrestrial BNF remain highly uncertain. Here, in this study, we show that this uncertainty is partly because of sampling bias, as field BNF measurements in natural terrestrial ecosystems occur where N fixers are 17 times more prevalent than their mean abundances worldwide. To correct this bias, we develop new estimates of global terrestrial BNF by upscaling field BNF measurements using spatially explicit abundances of all major biogeochemical N-fixing niches. We find that natural biomes sustain lower BNF, 65 (52–77) Tg N yr −1 , than previous empirical bottom-up estimates, with most BNF occurring in tropical forests and drylands. We also find high agricultural BNF in croplands and cultivated pastures, 56 (54–58) Tg N yr −1 . Agricultural BNF has increased terrestrial BNF by 64% and total terrestrial N inputs from all sources by 60% over pre-industrial levels. Our results indicate that BNF may impose stronger constraints on the carbon sink in natural terrestrial biomes and represent a larger source of agricultural N than is generally considered in analyses of the global N cycle, with implications for proposed safe operating limits for N use.

Reis Ely, Carla R. [Oregon State Univ., Corvallis,↗
DOE OSTI2023

Continental United States climate projections based on thermodynamic modification of historical weather

Abstract Regional climate models can be used to examine how past weather events might unfold under different climate conditions by simulating analogue versions of those events with modified thermodynamic conditions (i.e., warming signals). Here, we apply this approach by dynamically downscaling a 40-year sequence of past weather from 1980–2019 driven by atmospheric re-analysis, and then repeating this 40-year sequence a total of 8 times using a range of time-evolving thermodynamic warming signals that follow 4 80-year future warming trajectories from 2020–2099. Warming signals follow two emission scenarios (SSP585 and SSP245) and are derived from two groups of global climate models based on whether they exhibit relatively high or low climate sensitivity. The resulting dataset, which contains 25 hourly and over 200 3-hourly variables at 12 km spatial resolution, can be used to examine a plausible range of future climate conditions in direct reference to previously observed weather and enables a systematic exploration of the ways in which thermodynamic change influences the characteristics of historical extreme events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Effects of Oxygen Modification on the Structural and Magnetic Properties of Highly Epitaxial La0.7Sr0.3MnO3 (LSMO) thin films

Abstract La 0.7 Sr 0.3 MnO 3 , a strong semi-metallic ferromagnet having robust spin polarization and magnetic transition temperature ( T C ) well above 300 K, has attracted significant attention as a possible candidate for a wide range of memory, spintronic, and multifunctional devices. Since varying the oxygen partial pressure during growth is likely to change the structural and other physical functionalities of La 0.7 Sr 0.3 MnO 3 (LSMO) films, here we report detailed investigations on structure, along with magnetic behavior of LSMO films with same thickness (~30 nm) but synthesized at various oxygen partial pressures: 10, 30, 50, 100, 150, 200 and 250 mTorr. The observation of only ( 00 l ) reflections without any secondary peaks in the XRD patterns confirms the high-quality synthesis of the above-mentioned films. Surface morphology of the films reveals that these films are very smooth with low roughness, the thin films synthesized at 150 mTorr having the lowest average roughness. The increasing of magnetic T C and sharpness of the magnetic phase transitions with increasing oxygen growth pressure suggests that by decreasing the oxygen growth pressure leads to oxygen deficiencies in grown films which induce oxygen inhomogeneity. Thin films grown at 150 mTorr exhibits the highest magnetization with T C = 340 K as these thin films possess the lowest roughness and might exhibit lowest oxygen vacancies and defects. Interpretation and significance of these results in the 30 nm LSMO thin films prepared at different oxygen growth pressures are also presented, along with the existence and growth pressure dependence of negative remanent magnetization (NRM) of the above-mentioned thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Study of graphene p-n junctions formed by the electrostatic modification of the SiO2 substrate

Abstract We study the transport properties of mm-scale CVD graphene p-n junctions, which are formed in a single gated graphene field effect transistor configuration. Here, an electrical-stressing-voltage technique served to modify the electrostatic potential in the SiO 2 /Si substrate and create the p-n junction. We examine the transport characteristics about the Dirac points that are localized in the perturbed and unperturbed regions in the graphene channel and note the quantitative differences in the Hall effect between the perturbed and unperturbed regions. The results also show that the longitudinal resistance is highly sensitive to the external magnetic field when the Hall bar device operates as a p-n junction.

Science & Technology - Other Topics↗
DOE OSTI2020

Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy

Abstract Extreme shear deformation is used for several material processing methods and is unavoidable in many engineering applications in which two surfaces are in relative motion against each other while in physical contact. The mechanistic understanding of the microstructural evolution of multi-phase metallic alloys under extreme shear deformation is still in its infancy. Here, we highlight the influence of shear deformation on the microstructural hierarchy and mechanical properties of a binary as-cast Al-4 at.% Si alloy. Shear-deformation-induced grain refinement, multiscale fragmentation of the eutectic Si-lamellae, and metastable solute saturated phases with distinctive defect structures led to a two-fold increase in the flow stresses determined by micropillar compression testing. These results highlight that shear deformation can achieve non-equilibrium microstructures with enhanced mechanical properties in Al–Si alloys. The experimental and computational insights obtained here are especially crucial for developing predictive models for microstructural evolution of metals under extreme shear deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inducing a tunable skyrmion-antiskyrmion system through ion beam modification of FeGe films

Abstract Skyrmions and antiskyrmions are nanoscale swirling textures of magnetic moments formed by chiral interactions between atomic spins in magnetic noncentrosymmetric materials and multilayer films with broken inversion symmetry. These quasiparticles are of interest for use as information carriers in next-generation, low-energy spintronic applications. To develop skyrmion-based memory and logic, we must understand skyrmion-defect interactions with two main goals—determining how skyrmions navigate intrinsic material defects and determining how to engineer disorder for optimal device operation. Here, we introduce a tunable means of creating a skyrmion-antiskyrmion system by engineering the disorder landscape in FeGe using ion irradiation. Specifically, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au 4+ ions at varying fluences, inducing amorphous regions within the crystalline matrix. Using low-temperature electrical transport and magnetization measurements, we observe a strong topological Hall effect with a double-peak feature that serves as a signature of skyrmions and antiskyrmions. These results are a step towards the development of information storage devices that use skyrmions and antiskyrmions as storage bits, and our system may serve as a testbed for theoretically predicted phenomena in skyrmion-antiskyrmion crystals.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Promotion of oxygen reduction reaction on a double perovskite electrode by a water-induced surface modification

Highly efficient air electrodes are a key component of reversible fuel cells for energy storage and conversion; however, the development of efficient electrodes that are stable against water vapor remains a grand challenge. Here we report an air–electrode, composed of double perovskite material PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) backbone coated with nanoparticles (NPs) of BaCoO 3-δ (BCO), that exhibits remarkable electrocatalytic activity for oxygen reduction reaction (ORR) while maintaining excellent tolerance to water vapor. When tested in a symmetrical cell exposed to wet air with 3 vol% H 2 O at 750 °C, the electrode shows an area specific resistance of ~0.03 Ω cm 2 in an extended period of time. The performance enhancement is attributed mainly to the electrocatalytic activity of the BCO NPs dispersed on the surface of the porous PBCC electrode. Moreover, in situ Raman spectroscopy is used to probe reaction intermediates (e.g., oxygen species) on electrode surfaces, as the electrochemical properties of the electrodes are characterized under the same conditions. The direct correlation between surface chemistry and electrochemical behavior of an electrode is vital to gaining insight into the mechanisms of the electrocatalytic processes in fuel cells and electrolysers.

25 ENERGY STORAGE↗
DOE OSTI2021

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li⁺-conducting cathode-electrolyte interphase

Ni-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes are investigated to realize high energy density Li ion batteries for long life electric vehicle applications. However, capacity decay and thermal instability due to cathode-electrolyte interfacial degradation remain challenges that require sophisticated surface stabilization methods to address. Here, we propose a strategy, for the first time, to form an artificial Li + -conducting cathode-electrolyte interphase (ALCEI) on the NCM811 cathode surface using a nucleophilic reaction between polysulfides and vinylene carbonate (VC). Furthemore, the as-formed ALCEI layer simultaneously protects the NCM particles from electrolyte corrosion and facilitates Li + ion transport, thus enabling stable and high rate cycling of NCM811. As a result, the ALCEI-modified NCM811 cathode exhibits a high capacity (211.6 mA h g -1 at 0.1C), notable rate capability (134 mA h g -1 at 10C), and superior cycle stability (94.2% over 200 cycles at 1C). These results underscore the use of interfacial engineering in high voltage cathode material development and provide a feasible strategy for stabilizing Ni-rich cathode interfaces in practical Li ion battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Metabolic Modification of Sphingobium lignivorans SYK-6 for Lignin Valorization Through the Discovery of an Unusual Transcriptional Repressor of Lignin-Derived Dimer Catabolism

Sphingobium lignivorans SYK-6 catabolizes guaiacylglycerol-..beta..-guaiacyl ether (GGE, a ..beta..-O-4-type dimer) and 1,2-diguaiacylpropane-1,3-diol (DGPD, a ..beta..-1-type dimer) derived from lignin. Recently, SLG_35860 containing TetR- and MarR-type transcriptional regulator motifs was suggested to be involved in the regulation of GGE and DGPD catabolism. Here we investigated the role of SLG_35860 in the transcriptional regulation of GGE and DGPD catabolism genes. SLG_35860 designated ligS repressed 11 genes involved in GGE and DGPD catabolism. LigS binds directly to specific sequences in the promoter region of each gene. The MarR domain was shown to be involved in these bindings; however, GGE, DGPD, and their metabolites did not function as effectors of LigS. We discovered unidentified compound(s) in the black liquor of oxygen-soda anthraquinone pulping of Japanese cedar that SYK-6 cannot metabolize and that acted as effector(s). Therefore, LigS constantly represses the transcription of the GGE and DGPD catabolism genes to low levels. Based on these findings, we examined the productivity of a polymer building block, 2-pyrone-4,6-dicarboxylic acid (PDC), from GGE, DGPD, and a GGE metabolite using an engineered ligS mutant. The rates of PDC production from each compound by this strain were 1.5-6.0 times higher than those of a PDC-producing strain carrying ligS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Chloride modification of vacuum-assisted blade-coated perovskite solar cells and mini-modules in ambient environment

Scalable deposition of perovskite thin films under ambient conditions remains a key challenge for the commercialization of perovskite photovoltaics, primarily due to the difficulty of controlling crystallization kinetics and suppressing non-radiative recombination during film formation. In this work, we present an effective strategy to modulate crystallization kinetics and non-radiative recombination in vacuum-quenched blade-coated perovskite films processed in air using chloride-based additives. By systematically comparing PbCl 2 and 3-chloropropylamine hydrochloride (Cl-PACl), we elucidate how different chloride incorporation pathways influence crystallization behavior and optoelectronic properties. In situ transmission and in situ photoluminescence measurements reveal that PbCl 2 acts as a transient additive that slows intermediate/perovskite phase formation while suppressing non-radiative recombination, leading to improved film quality. In contrast, Cl-PACl introduces additional trap states that deteriorate optoelectronic performance. As a result, PbCl 2 -modified perovskite solar cells achieve a champion power conversion efficiency (PCE) of 24.2% and remarkable operational stability, retaining over 90% of their initial performance after 800 hours of continuous illumination. Furthermore, we successfully scaled the process, fabricating a perovskite mini-module that delivered a champion efficiency of 18.0%. This study underscores the critical importance of coupling vacuum-assisted blade coating with transient additive engineering for achieving high-performance, stable, and scalable perovskite photovoltaics processed in ambient air.

14 SOLAR ENERGY↗
DOE OSTI2024

Photon-triggered jets as probes of multi-stage jet modification

Prompt photons are created in the early stages of heavy ion collisions and traverse the QGP medium without any interaction. Therefore, photontriggered jets can be used to study the jet quenching in the QGP medium. In this work, photon-triggered jets are studied through different jet and jet substructure observables for different collision systems and energies using the JETSCAPE framework. Since the multistage evolution used in the JETSCAPE framework is adequate to describe a wide range of experimental observables simultaneously using the same parameter tune, we use the same parameters tuned for jet and leading hadron studies. The same isolation criteria used in the experimental analysis are used to identify prompt photons for better comparison. For the first time, high-accuracy JETSCAPE results are compared with multi-energy LHC and RHIC measurements to better understand the deviations observed in prior studies. This study highlights the importance of multistage evolution for the simultaneous description of experimental observables through different collision systems and energies using a single parameter tune.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Deciphering yield modification of hadron-triggered semi-inclusive recoil jets in heavy-ion collisions

Jet quenching is recognized as critical evidence for the existence of the quark-gluon plasma (QGP) and serves as an essential probe to study its transport properties. Measurements of hadron-triggered semi-inclusive recoil jets have gained popularity due to its capability to probe jets over an extended phase space at low transverse momenta (p T ) and large radii. Recent ALICE measurements showed that the I AA , yield ratio of recoil jets between heavy-ion and p+p collisions, rises with jet p T and exceeds unity at high p T , contradicting conventional expectations that jet quenching should result in I AA values less than one. In this contribution, we re-examine the surface bias and study the effects of energy losses for both trigger hadrons and recoil jets on I AA , employing the Linear Boltzmann Transport (LBT) model to simulate jet-medium interactions. Our findings suggest that a large portion of hadrons used for the triggers undergoes substantial energy loss, despite surface bias. In particular, the energy loss of the trigger hadrons elevates the I AA baseline, corresponding to the case of no energy loss for recoil jets, to be greatly larger than unity. This enhancement of the baseline implies that the measured I AA values being larger than unity could still signal jet quenching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Modification of magnetocrystalline anisotropy via ion-implantation

The ability to systematically modify the magnetic properties of epitaxial La 0.7 Sr 0.3 MnO 3 thin films is demonstrated through the use of Ar + ion implantation. With increasing implant dose, a uniaxial expansion of the c-axis of the unit cell leads to a transition from in-plane toward perpendicular magnetic anisotropy. Above a critical dose of 3 × 10 13 Ar + /cm 2 , significant crystalline disorder exists leading to a decrease in the average Mn valence state and near complete suppression of magnetization. Combined with lithographic techniques, ion implantation enables the fabrication of magnetic spin textures consisting of adjacent regions with tunable magnetic anisotropy in complex oxide thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Acceptor dopant mediated electrical property modification in Bi0.5Na0.5TiO3-based piezoceramic

The effect of Mn and Fe dopants on the electromechanical and electrochemical properties of 0.88[Bi 0.5 Na 0.5 ]TiO 3 –0.08[Bi 0.5 K 0.5 ]TiO 3 –0.04[Bi 0.5 Li 0.5 ]TiO 3 piezoceramic is investigated with particular emphasis on complex impedance in the temperature range from 450 to 600 °C. The impedance spectra have been simulated with equivalent circuits in order to extract bulk and grain boundary characteristics and to determine activation energies of conduction. Mn and Fe dopants considerably enhance the mechanical quality factor and decrease the dielectric loss compared to the undoped composition. Mn doping leads to dramatically higher resistivity in the bulk and a modest increase in the bulk activation energy. On the other hand, conductivity increases dramatically via Fe doping with a significant lowering of activation energy in the bulk and corresponding raising of the activation energy at grain boundaries in comparison to Mn-doped and undoped ceramic. The bulk conductivity of Fe-doped piezoceramic reaches as high as 0.01 S cm -1 at 600 °C.

36 MATERIALS SCIENCE↗