Search NASA⌕ Search

SEARCH · Search NASA

Results for “Motion Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Energy-state formulation of lumped volume dynamic equations with application to a simplified free piston Stirling engine

Lumped volume dynamic equations are derived using an energy-state formulation. This technique requires that kinetic and potential energy state functions be written for the physical system being investigated. To account for losses in the system, a Rayleigh dissipation function is also formed. Using these functions, a Lagrangian is formed and using Lagrange's equation, the equations of motion for the system are derived. The results of the application of this technique to a lumped volume are used to derive a model for the free-piston Stirling engine. The model was simplified and programmed on an analog computer. Results are given comparing the model response with experimental data.

Daniele, C. J.↗

Analog analysis of a tracked air-cushion vehicle.

The dynamics of tracked air-cushion vehicles considered for high-speed ground transportation systems are examined using a vehicle model represented by a one-degree-of-freedom system. The respective equations of motion are derived, and the control system is discussed. The equations obtained for the cushion are solved using an analog computer. The computer showed the effect of the control technique on the relative motion between vehicle and guideway.

Leatherwood, J. D.↗

Asymptotic symmetries of three dimensional gravity and the membrane paradigm

The asymptotic symmetry group of three-dimensional (anti) de Sitter space with Brown-Henneaux boundary conditions is the two dimensional conformal group with central charge c = 3 ℓ/ 2 G . Usually the asymptotic charge algebra is derived using the symplectic structure of the bulk Einstein equations. Here, we derive the asymptotic charge algebra by a different route. First, we formulate the dynamics of the boundary as a 1+1-dimensional dynamical system. Then we realize the boundary equations of motion as a Hamiltonian system on the dual Lie algebra, \( {\mathfrak{g}}^{\ast } \) , of the two-dimensional conformal group. Finally, we use the Lie-Poisson bracket on \( {\mathfrak{g}}^{\ast } \) to compute the asymptotic charge algebra. This streamlines the derivation of the asymptotic charge algebra because the Lie-Poisson bracket on the boundary is significantly simpler than the symplectic structure derived from the bulk Einstein equations. It also clarifies the analogy between the infinite dimensional symmetries of gravity and fluid dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

VTOL/STOL visual study

The development of data bases and real time techniques to improve the realism of sea state, bow and stern wake, and ship motion is addressed. This system was designed for use with the Vertical Motion Simulator to perform basic studies on VTOL/STOL aircraft.

Lewandowski, F. P.↗

Transonic applications of the Wake Imaging System

The extension of a rapid flow field survey method (wake imaging system) originally developed for low speed wind tunnel operation, to transonic wind tunnel applications is discussed. The advantage of the system, beside the simplicity and low cost of the data acquisition system, is that the probe position data are recorded as an optical image of the actual sensor and thus are unaffected by the inevitable deflections of the probe support. This permits traversing systems which are deliberately flexible and have unusual motions. Two transverse drive systems are described and several typical data images are given.

Crowder, J. P.↗

A natural partitioning scheme for parallel simulation of multibody systems

A parallel partitioning scheme based on physical-coordinate variables is presented to systematically eliminate system constraint forces and yield the equations of motion of multibody dynamics systems in terms of their independent coordinates. Key features of the present scheme include an explicit determination of the independent coordinates, a parallel construction of the null space matrix of the constraint Jacobian matrix, an easy incorporation of the previously developed two-stage staggered solution procedure, and Schur complement based parallel preconditioned conjugate gradient numerical algorithm.

Chiou, J. C.↗

A natural partitioning scheme for parallel simulation of multibody systems

A parallel partitioning scheme based on physical-co-ordinate variables is presented to systematically eliminate system constraint forces and yield the equations of motion of multibody dynamics systems in terms of their independent coordinates. Key features of the present scheme include an explicit determination of the independent coordinates, a parallel construction of the null space matrix of the constraint Jacobian matrix, an easy incorporation of the previously developed two-stage staggered solution procedure and a Schur complement based parallel preconditioned conjugate gradient numerical algorithm.

Chiou, J. C.↗

Poster — Thur Eve — 23: Dose and Position Quality Assurance using the RADPOS System for 4D Radiotherapy with CyberKnife

Introduction: RADPOS 4D dosimetry system consists of a microMOSFET dosimeter combined with an electromagnetic positioning sensor, which allows for performing real-time dose and position measurements simultaneously. In this report the use of RADPOS as an independent quality assurance (QA) tool during CyberKnife 4D radiotherapy treatment is described. In addition to RADPOS, GAFCHROMIC® films were used for simultaneous dose measurement. Methods: RADPOS and films were calibrated in a Solid Water® phantom at 1.5 cm depth, SAD= 80 cm, using 60 mm cone. CT based treatment plan was created for a Solid Water® breast phantom containing metal fiducials and RADPOS probe. Dose calculations were performed using iPlan pencil beam algorithm. Before the treatment delivery, GAFCHROMIC® film was inserted inside the breast phantom, next to the RADPOS probe. Then the phantom was positioned on the chest platform of the QUASAR, to which Synchrony LED optical markers were also attached. Position logging began for RADPOS and the Synchrony tracking system, the QUASAR motion was initiated and the treatment was delivered. Results: RADPOS position measurements very closely matched the LED marker positions recorded by the Synchrony camera tracking system. The RADPOS measured dose was 2.5% higher than the average film measured dose, which is within the experimental uncertainties. Treatment plan calculated dose was 4.1 and 1.6% lower than measured by RADPOS and film, respectively. This is most likely due to the inferior nature of the dose calculation algorithm. Conclusions: Our study demonstrates that RADPOS system is a useful tool for independent QA of CyberKnife treatments.

07 ISOTOPE AND RADIATION SOURCES↗

Perform - A performance optimizing computer program for dynamic systems subject to transient loadings

A description and applications of a computer capability for determining the ultimate optimal behavior of a dynamically loaded structural-mechanical system are presented. This capability provides characteristics of the theoretically best, or limiting, design concept according to response criteria dictated by design requirements. Equations of motion of the system in first or second order form include incompletely specified elements whose characteristics are determined in the optimization of one or more performance indices subject to the response criteria in the form of constraints. The system is subject to deterministic transient inputs, and the computer capability is designed to operate with a large linear programming on-the-shelf software package which performs the desired optimization. The report contains user-oriented program documentation in engineering, problem-oriented form. Applications cover a wide variety of dynamics problems including those associated with such diverse configurations as a missile-silo system, impacting freight cars, and an aircraft ride control system.

Pilkey, W. D.↗

Motion of Air Bubbles in Water Subjected to Microgravity Accelerations

The International Space Station (ISS) serves as a platform for microgravity research for the foreseeable future. A microgravity environment is one in which the effects of gravity are drastically reduced which then allows physical experiments to be conducted without the overpowering effects of gravity. During his six month stay on the ISS, astronaut Donald R Pettit performed many informal/impromptu science experiments with available equipment. One such experiment focused on the motion of air bubbles in a rectangular container nearly filled with de-ionized water. Bubbles were introduced by shaking and the container was secured in place for several hours while motion of the bubbles were recorded using time-lapse photography. This paper shows correlation between bubble motion and quasi-steady acceleration levels during one such experiment operation. The quasi-steady acceleration vectors were measured by the Microgravity Acceleration Measurement System. Essentially linear motion was observed in the condition considered here. Dr. Pettit also created other conditions which produced linear and circulating motion, which are the subjects of further study. Initial observations of this bubble motion agree with calculations from many microgravity physical science experiments conducted on Shuttle microgravity science missions. Many crystal-growth furnaces involve heavy metals and high temperatures in which undesired acceleration-driven convection during solidification can adversely affect the crystal. Presented in this paper will be results showing correlation between bubble motion and the quasi-steady acceleration vector.

DeLombard, Richard↗

Extending Newtonian Dynamics to Include Stochastic Processes

A paper presents further results of continuing research reported in several previous NASA Tech Briefs articles, the two most recent being Stochastic Representations of Chaos Using Terminal Attractors (NPO-41519), [Vol. 30, No. 5 (May 2006), page 57] and Physical Principle for Generation of Randomness (NPO-43822) [Vol. 33, No. 5 (May 2009), page 56]. This research focuses upon a mathematical formalism for describing post-instability motions of a dynamical system characterized by exponential divergences of trajectories leading to chaos (including turbulence as a form of chaos). The formalism involves fictitious control forces that couple the equations of motion of the system with a Liouville equation that describes the evolution of the probability density of errors in initial conditions. These stabilizing forces create a powerful terminal attractor in probability space that corresponds to occurrence of a target trajectory with probability one. The effect in configuration space (ordinary three-dimensional space as commonly perceived) is to suppress exponential divergences of neighboring trajectories without affecting the target trajectory. As a result, the post-instability motion is represented by a set of functions describing the evolution of such statistical quantities as expectations and higher moments, and this representation is stable.

Zak, Michail↗

Advances in High-Power Wireless Charging Systems: Overview and Design Considerations

Wireless charging systems are foreseen as an effective solution to improve the convenience and safety of conventional conductive chargers. As this technology has matured, recent broad applications of wireless chargers to electrified transportation have indicated a trend toward higher power, power density, modularity, and scalability of designs. In this article, commercial systems and laboratory prototypes are reviewed, focusing mostly on the advances in high-power wireless charging systems. The recent endeavors in magnetic pad designs, compensation networks, power electronics converters, control strategies, and communication protocols are illustrated. Both stationary and dynamic (in-motion) wireless charging systems are discussed, and critical differences in their designs and applications are emphasized. On that basis, the comparisons among different solutions and design considerations are summarized to present the essential elements and technology roadmap that will be necessary to support large-scale deployment of high-power wireless charging systems. The review is concluded with the discussion of several fundamental challenges and prospects of high-power wireless power transfer (WPT) systems. Foreseen challenges include utilization of advanced materials, electric and electromagnetic field measurement and mitigation, customization, communications, power metering, and cybersecurity.

25 ENERGY STORAGE↗

Spin vector control of a spinning space station

Digital computer program simulates system and related functions. Program is intended for, but not limited to, altitude control studies of rotating space station. Russel's method of formulating and solving motion equations for system of rigid bodies connected by movable joints is applied. Program features are listed.

Hendricks, T.↗

IGRT/ART phantom with programmable independent rib cage and tumor motion

Purpose: This paper describes the design and experimental evaluation of the Methods and Advanced Equipment for Simulation and Treatment in Radiation Oncology (MAESTRO) thorax phantom, a new anthropomorphic moving ribcage combined with a 3D tumor positioning system to move target inserts within static lungs. Methods: The new rib cage design is described and its motion is evaluated using Vicon Nexus, a commercial 3D motion tracking system. CT studies at inhale and exhale position are used to study the effect of rib motion and tissue equivalence. Results: The 3D target positioning system and the rib cage have millimetre accuracy. Each axis of motion can reproduce given trajectories from files or individually programmed sinusoidal motion in terms of amplitude, period, and phase shift. The maximum rib motion ranges from 7 to 20 mm SI and from 0.3 to 3.7 mm AP with LR motion less than 1 mm. The repeatability between cycles is within 0.16 mm root mean square error. The agreement between CT electron and mass density for skin, ribcage, spine hard and inner bone as well as cartilage is within 3%. Conclusions: The MAESTRO phantom is a useful research tool that produces programmable 3D rib motions which can be synchronized with 3D internal target motion. The easily accessible static lungs enable the use of a wide range of inserts or can be filled with lung tissue equivalent and deformed using the target motion system.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantum fluctuations in a cavity-QED system with quantized center-of-mass motion

We investigate the quantum fluctuations of a single atom in a weakly driven cavity where the center-of-mass motion of the atom is quantized in one dimension. We present analytic results for the second-order intensity correlation function g{sup (2)}({tau}) and the intensity-field correlation function h{sub {theta}}({tau}) for both transmitted and fluorescent light for weak driving fields. We find that the coupling of the center-of-mass motion to the intracavity field mode can be deleterious to nonclassical effects in photon statistics, but less so for the intensity-field correlations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Schools of skyrmions with electrically tunable elastic interactions

Coexistence of order and fluidity in soft matter often mimics that in biology, allowing for complex dynamics and applications-like displays. In active soft matter, emergent order can arise because of such dynamics. Powered by local energy conversion, this behavior resembles motions in living systems, like schooling of fish. Similar dynamics at cellular levels drive biological processes and generate macroscopic work. Inanimate particles capable of such emergent behavior could power nanomachines, but most active systems have biological origins. Here we show that thousands-to-millions of topological solitons, dubbed “skyrmions”, while each converting macroscopically-supplied electric energy, exhibit collective motions along spontaneously-chosen directions uncorrelated with the direction of electric field. Within these “schools” of skyrmions, we uncover polar ordering, reconfigurable multi-skyrmion clustering and large-scale cohesion mediated by out-of-equilibrium elastic interactions. Remarkably, this behavior arises under conditions similar to those in liquid crystal displays and may enable dynamic materials with strong emergent electro-optic responses.

Science & Technology - Other Topics↗