Search NASA⌕ Search

SEARCH · Search NASA

Results for “NATURAL RADIOACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Climate change impact on residual contaminants under sustainable remediation

This study investigates the potential impact of climate change on residual contaminants in vadose zones and groundwater. We assume that the effect of climate changes can be represented by perturbations in the natural recharge through the aquifer system. We perform numerical modeling of unsaturated/saturated flow and transport and consider different performance metrics: contaminant concentrations at observation wells and contaminant export at the site's boundary. We evaluate the effect of increasing and decreasing recharge as well as the impact of potential failure of surface capping structures employed to immobilize vadose zone contaminants. Our approach is demonstrated in a real case study by simulating transport of non-reactive radioactive tritium at the U.S. Department of Energy's Savannah River Site. Results show that recharge changes significantly affect well concentrations: after an initial slight dilution we identify a significant concentration increase at different observation wells some years after the recharge increase and/or the cap failure, as a consequence of contaminants' mobilization. This effect is generally emphasized and occurs earlier as the recharge increases. Under decreased aquifers' recharge the concentration could slightly increase for some years, due to a decrease of dilution, depending on the magnitude of the negative recharge shift. We identify trigger levels of recharge above which the concentration/export breakthrough curves and the time of exceedance of the Maximum Contaminant Level for tritium are remarkably affected. Moreover, we observe that the contaminant export at the control plane, identified as the risk pathway to the downgradient population, may only be minimally affected by shifts in the natural recharge regime, except for some extreme cases. We conclude that more frequent sampling and in-situ monitoring near the source zone should be adopted to better explain concentrations' anomalies under changing climatic conditions. Moreover, the maintenance of the cap is critical not only to sequester residual contaminants in the vadose zone, but also to reduce the uncertainty associated with future precipitation changes. Finally, realistic flow and transport simulations achieved through proper calibration processes, rather than conservative modeling, should be adopted to identify non-trivial trade-offs which enable better allocation of resources towards reducing uncertainty in decision making.

54 ENVIRONMENTAL SCIENCES↗

Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction

Microbial communities associated with produced water from hydraulic fracturing are not well understood, and their deleterious activity can lead to significant increases in production costs and adverse environmental impacts. In this study, we compared the microbial ecology in prefracturing fluids (fracturing source water and fracturing fluid) and produced water at multiple time points from a natural gas well in southwestern Pennsylvania using 16S rRNA gene-based clone libraries, pyrosequencing, and quantitative PCR. The majority of the bacterial community in prefracturing fluids constituted aerobic species affiliated with the class Alphaproteobacteria. However, their relative abundance decreased in produced water with an increase in halotolerant, anaerobic/facultative anaerobic species affiliated with the classes Clostridia, Bacilli, Gammaproteobacteria, Epsilonproteobacteria, Bacteroidia, and Fusobacteria. Produced water collected at the last time point (day 187) consisted almost entirely of sequences similar to Clostridia and showed a decrease in bacterial abundance by 3 orders of magnitude compared to the prefracturing fluids and produced water samplesfrom earlier time points. Geochemical analysis showed that produced water contained higher concentrations of salts and total radioactivity compared to prefracturing fluids. This study provides evidence of long-term subsurface selection of the microbial community introduced through hydraulic fracturing, which may include significant implications for disinfection as well as reuse of produced water in future fracturing operations.

03 NATURAL GAS↗

Quantification of Technetium-99 in Complex Groundwater Matrixes using a Radiometric Preconcentrating Minicolumn Sensor in an Equilibration-based Sensing Approach

A preconcentrating minicolumn sensor for pertechnetate detection in water consists of a packed bed containing a mixture of anion exchange resin and scintillating plastic beads. The column materials are contained in a transparent plastic flow cell placed between two photomultiplier tubes for radiometric detection. Upon retention of pertechnetate anions, the radioactive decay of Tc-99 results in detectable scintillation pulses that are counted in coincidence. In equilibration-based sensing mode, the sample is pumped through the packed bed until complete chromatographic equilibrium is achieved between the activity concentration in the water sample and the concentration on the anion exchange resin. The analytical signal is the observed steady state count rate at equilibrium. The sensitivity is related to a measurement efficiency parameter that is the product of the retention volume and the absolute radiometric detection efficiency. This sensor can readily detect pertechnetate to levels ten times below the drinking water standard of 0.033 Bq/mL. The potential for other anions in natural groundwater and contaminated groundwater plumes to interfere with pertechnetate detection and quantification have been examined in detail, with reference to the groundwater chemistry at the Hanford Site in Washington State. Individual anions such as nitrate, carbonate, chloride and iodide, at natural or elevated concentrations, do not interfere significantly with pertechnetate uptake on the anion exchange resin. Elevated chromate or sulfate anion concentrations can interfere with pertechnetate uptake by the resin, but only at levels substantially higher than typical concentrations in groundwater or contamination plumes. Nevertheless, elevated anion concentrations may reduce pertechnetate uptake and sensitivity of the sensor when present in combination. Chromate is retained on the anion exchange resin from water at ppb levels, leading to an orange stain that interferes with pertechnetate detection by the absorption of scintillation light pulses (color quench). Radioactivity from radioiodine, tritium, and uranium are not expected to create a significant positive bias in groundwater analyses. A method of automated fluidic standard addition is demonstrated that corrects for matrix interferences leading to accurate analyses over a wide range of groundwater compositions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

(Project 18-15502) Reducing Uncertainty in Radionuclide Transport Prediction Using Multiple Environmental Tracers (Final Report)

In order to successfully site and design a nuclear waste disposal facility, DOE scientists are required to show safe containment of the radioactive waste for up to 1 million years. A significant hurdle to accurately and convincingly demonstrating disposal safety is predicting the fate of radioactive elements once they enter the groundwater system surrounding the repository. These predictions are often made with computer models, which contain accurate physics of groundwater movement and chemical reactions that occur during groundwater flow. As computer power increases, the physics and chemistry of these computer simulators can become more and more realistic and the physically based error decreases. However, the ability of these computer models to provide accurate predictions in a specific place, over long time periods, requires the scientists and engineers to know the subsurface properties of the Earth that control groundwater movement. In particular, groundwater scientists and engineers need to know the groundwater fluid velocity, which can change over time and strongly vary with location within the groundwater system. Because the Earth’s subsurface cannot be directly seen, and can only be sampled at drilling locations, the properties of the groundwater system are never known completely, and computer models of groundwater transport will always have some amount of uncertainty. This project’s principal goal was to use chemicals and isotope “tracers”, which have been introduced to the groundwater system by natural processes over long time periods, to help inform computer models of the groundwater velocity and subsurface properties. The goal was to calculate how much better predictions of groundwater transport were when these “tracers” were used to inform the computer models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Abatement of ionizing radiation for superconducting quantum devices

Ionizing radiation has been shown to reduce the performance of superconducting quantum circuits. In this report, we evaluate the expected contributions of different sources of ambient radioactivity for typical superconducting qubit experiment platforms. Our assessment of radioactivity inside a typical cryostat highlights the importance of selecting appropriate materials for the experiment components nearest to qubit devices, such as packaging and electrical interconnects. We present a shallow underground facility (30-meter water equivalent) to reduce the flux of cosmic rays and a lead shielded cryostat to abate the naturally occurring radiogenic gamma-ray flux in the laboratory environment. We predict that superconducting qubit devices operated in this facility could experience a reduced rate of correlated multi-qubit errors by a factor of approximately 20 relative to the rate in a typical above-ground, unshielded facility. Finally, we outline overall design improvements that would be required to further reduce the residual ionizing radiation rate, down to the limit of current generation direct detection dark matter experiments.

47 OTHER INSTRUMENTATION↗

A First Principles Investigation of the Electronic Structure of Actinide Oxides

The ground state electronic structures of the actinide oxides AO, A{sub 2}O{sub 3} and AO{sub 2} (A=U, Np, Pu, Am, Cm, Bk, Cf) are determined from first-principles calculations using the self-interaction corrected local spin-density approximation. Our study reveals a strong link between preferred oxidation number and degree of localization. The ionic nature of the actinide oxides emerges from the fact that those oxides where the ground state is calculated to be metallic do not exist in nature, as the corresponding delocalized f-states favour the accommodation of additional O atoms into the crystal lattice.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nuclide Release Pathways in and Around a Trench Repository for Radioactive Waste - 16014

An effective model for a safety assessment of a conceptual trench repository system, in which low-and intermediate level radioactive waste (LILW) is disposed of has been developed. The repository system is assumed to be located in the surface area of a mountain hill near the seashore. An easy-to-use computer program based on this model, developed as a GoldSim template, has been extended based on the previous one in consideration of the rather possible complex pathways in and around the trench for its performance assessment, which is able to evaluate a nuclide release from the repository and farther transport into the geosphere and biosphere under various normal, disruptive natural, and manmade events, and scenarios that can occur after a failure of waste drums with associated uncertainty. To demonstrate the nuclide release and transport behavior through these various possible pathways in the near- and far-fields of the repository system under certain scenarios, some illustrative evaluations and a simple sensitivity investigation with C-14 for the concrete barriers of the trench were made. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Heavy-ion production of 77 Br and 76 Br

Many radioisotopes with potential medical applications are difficult to produce routinely, especially those on the proton-rich side of the valley of stability. Current production methods typically use light-ion (protons or deuteron) reactions on materials of similar mass to the target radioisotope, which limits the elemental target material available and may require the use of targets with poor thermal properties (as is the case for the production of radiobromine). These reactions may also create significant amounts of proton-rich decay products which require chemical separation from the desired product in a highly radioactive environment. A promising alternative method using heavy-ion fusion-evaporation reactions for the production of the medically relevant bromine radioisotopes 76 Br (t 1/2 = 16.2 h) and 77 Br (t 1/2 = 57.0 h) is presented. Heavy-ion beams of 28 Si and 16 O were used to bombard natural chromium and copper targets just above the Coulomb barrier at the University of Notre Dame's Nuclear Science Laboratory to produce these bromine and precursor radioisotopes by fusion-evaporation reactions. Production yields for these reactions were measured and compared to PACE4 calculations. In addition to using more robust targets for irradiation, a simple physical–chemical separation method is proposed that will lead to very high radiopurity yields. A summary of accelerator facility requirements needed for routine production of these radioisotopes is also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A RE-LOOK AT THE US NRC SAFETY GOALS

Since they were adopted in 1986, the US NRC’s Safety Goals have played a valuable role as a de facto risk acceptance criterion against which the predicted performance of a commercial nuclear power reactor can be evaluated and assessed. The current safety goals are cast in terms of risk metrics called quantitative health objectives (QHOs), limiting numerical values of the risks of the early and latent health effects of accidental releases of radioactivity to the offsite population. However, while demonstrating compliance with current safety goals has been an important step in assessing the acceptance of the risk posed by LWRs, new or somewhat different goals may be needed that go beyond the current early fatality and latent cancer fatality QHOs in assessing reactor risk. Natural phenomena such as hurricanes seem to be suitable candidates for establishing a background rate to derive a risk goal as their order of magnitude cost of damages is similar to those estimated in severe accident Level 3 PRAs done for nuclear power plants. This paper obtains a risk goal that could have a wider applicability, compared to the current QHOs, as a technology-neutral goal applicable to future reactors and multi-unit sites.

42 ENGINEERING↗

Developments that are making the Versa-Pac Indeed More Versatile (and More Useful to Industry) - 16267

Daher-TLI acquired the assets and employees of Century Industries, a radioactive material packaging manufacturing facility, in 2013. Included in that acquisition was the Versa-Pac Shipping Package. The Versa-Pac is an NRC licensed Type AF packaging (Certificate of Compliance no. USA/9342/AF-96) and was originally designed as a replacement for standard 7A drum-type transportation packaging. It can be used directly or in conjunction with pails, drums or inserts that can be manufactured to accommodate a variety of smaller containers and vessels. The Versa-Pac comes in two sizes, the VP-55 (i.e., 55-gallon drum version) and VP-110 (i.e., 110-gallon drum version). It features a patented design concept in combination with the drum exterior to provide enhanced structural protection to payloads under Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC), per 10CFR71.71 and 10CFR71.73 respectively. Since its introduction in 2010, the Versa-Pac has been utilized mainly as a one-time use package for disposing of radioactive waste. The package is also designed as a reusable package for transporting front-end materials. Discussions with current and prospective clients have resulted in numerous improvements, accomplished and planned, to the package's payload capability through additional engineering analyses and actual design modifications. Revision 10 to the NRC Certificate of Compliance, dated August 6, 2015, introduces an enrichment-loading table that allows shipping larger quantities of U-235 for enrichments less than 100 wt.%. It also authorizes shipment of natural thorium. Other planned and proposed improvements include provisions to transport UF{sub 6} in 1S, 2S, and 5B cylinders, design changes that further increases the amount of U-235 at enrichments less than 100 wt.%, increasing the capacity of the VP-110, developing a lighter 30-gallon version, the VP-30, and introducing content limits specific to uranium-oxides in multiple forms. This paper traces the engineering and design efforts involved in expanding the Versa-Pac's versatility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rock-welding materials development for deep borehole nuclear waste disposal

We report that various versions of deep borehole nuclear waste disposal have been proposed in the past in which effective sealing of a borehole after waste emplacement is generally required. In a high temperature disposal mode, the sealing function will be fulfilled by melting the ambient granitic rock with waste decay heat or an external heating source, creating a melt that will encapsulate waste containers or plug a portion of the borehole above a stack of the containers. However, there are certain drawbacks associated with natural materials, such as high melting temperatures, inefficient consolidation, slow crystallization kinetics, the resulting sealing materials generally being porous with low mechanical strength, insufficient adhesion to waste container surface, and lack of flexibility for engineering controls. In this study, we showed that natural granitic materials can be purposefully engineered through chemical modifications to enhance the sealing capability of the materials for deep borehole disposal. The present work systematically explores the effect of chemical modification and crystallinity (amorphous vs. crystalline) on the melting and crystallization processes of a granitic rock system. The approach can be applied to modify granites excavated from different geological sites. Several engineered granitic materials have been explored which possess significantly lower processing and densification temperatures than natural granites. Finally, those new materials consolidate more efficiently by viscous flow and accelerated recrystallization without compromising their mechanical integrity and properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

K 2x Sn 4-x S 8-x (x = 0.65–1): a new metal sulfide for rapid and selective removal of Cs + , Sr 2+ and UO 2 2+ ions

The fission of uranium produces radionuclides, 137 Cs and 90 Sr, which are major constituents of spent nuclear fuel. The half-life of 137 Cs and 90 Sr is nearly 30 years and thus that makes them harmful to human life and the environment. The selective removal of these radionuclides in the presence of high salt concentrations from industrial nuclear waste is necessary for safe storage. We report the synthesis and crystal structure of K 2x Sn 4-x S 8-x (x = 0.65–1, KTS-3) a material which exhibits excellent Cs + , Sr 2+ and UO 2 2+ ion exchange properties in varying conditions. Furthermore, the compound adopts a layered structure which consists of exchangeable potassium ions sandwiched between infinite layers of octahedral and tetrahedral tin centers. K 2x Sn 4-x S 8-x (x = 0.65–1, KTS-3) crystallizes in the monoclinic space group P2 1 /c with cell parameters a = 13.092(3) Å, b = 16.882(2) Å, c = 7.375(1) Å and β = 98.10(1)°. Refinement of the single crystal diffraction data revealed the presence of Sn vacancies in the tetrahedra that are long range ordered. The interlayer potassium ions of KTS-3 can be exchanged for Cs + , Sr 2+ and UO 2 2+ . KTS-3 exhibits rapid and efficient ion exchange behavior in a broad pH range. The distribution coefficients (K d ) for KTS-3 are high for Cs + (5.5 × 10 4 ), Sr 2+ (3.9 × 10 5 ) and UO 2 2+ (2.7 × 10 4 ) at neutral pH (7.4, 6.9, 5.7 ppm Cs + , Sr 2+ and UO 2 2+ , respectively; V/m ~ 1000 mL g -1 ). KTS-3 exhibits impressive Cs + , Sr 2+ and UO 2 2+ ion exchange properties in high salt concentration and over a broad pH range, which coupled with the low cost, environmentally friendly nature and facile synthesis underscores its potential in treating nuclear waste.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Natural Resource Damages Settlement Projects at the Fernald Preserve - 12316

This paper describes the development and implementation of two ecological restoration projects at the Fernald Preserve that are funded through a CERCLA natural resource damage settlement. The Paddys Run Tributary Project involves creation of vernal pool wetland habitat with adjacent forest restoration. The Triangle Area Project is a mesic tall-grass prairie establishment, similar to other efforts at the Fernald Preserve. The goal of the Fernald Natural Resource Trustees is to establish habitat for Ambystomatid salamander species, as well as grassland birds. Planning and implementation of on-property ecological restoration projects is one component of compensation for natural resource injury. As with the rest of the Fernald Preserve, ecological restoration has helped turn a DOE liability into a community asset. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

Highlights: • Compared systems achieve primary energy savings between 34 and 140 MJ{sub primary}/100 MJ{sub input} {sub waste.} • Savings magnitude is foremost determined by chosen primary energy and materials production. • Energy consumption and process losses can be upset by increased technology efficiency. • Material recovery accounts for significant shares of primary energy savings. • Direct waste-to-energy is highly efficient if cogeneration (CHP) is possible. - Abstract: Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical–biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation). The systems achieved net primary energy savings in a range between 34 and 140 MJ{sub primary}/100 MJ{sub input} {sub waste}, in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3–9.5%, 1–18% and 1–8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat recovery, the biodrying MBS-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full stream combustion. Sensitivity to assumptions regarding virgin plastic substitution was tested and was found to mostly favour plastic recovery.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

From Nanowires to Biofilms: An Exploration of Novel Mechanisms of Uranium Transformation Mediated by Geobacter Bacteria

One promising strategy for the in situ bioremediation of radioactive groundwater contaminants that has been identified by the SBR Program is to stimulate the activity of dissimilatory metal-reducing microorganisms to reductively precipitate uranium and other soluble toxic metals. The reduction of U(VI) and other soluble contaminants by Geobacteraceae is directly dependent on the reduction of Fe(III) oxides, their natural electron acceptor, a process that requires the expression of Geobacter’s conductive pili (pilus nanowires). Expression of conductive pili by Geobacter cells leads to biofilm development on surfaces and to the formation of suspended biogranules, which may be physiological closer to biofilms than to planktonic cells. Biofilm development is often assumed in the subsurface, particularly at the matrix-well screen interface, but evidence of biofilms in the bulk aquifer matrix is scarce. Our preliminary results suggest, however, that biofilms develop in the subsurface and contribute to uranium transformations via sorption and reductive mechanisms. In this project we elucidated the mechanism(s) for uranium immobilization mediated by Geobacter biofilms and identified molecular markers to investigate if biofilm development is happening in the contaminated subsurface. The results provided novel insights needed in order to understand the metabolic potential and physiology of microorganisms with a known role in contaminant transformation in situ, thus having a significant positive impact in the SBR Program and providing novel concept to monitor, model, and predict biological behavior during in situ treatments.

60 APPLIED LIFE SCIENCES↗

The future of RADCALC- the radioactive material and waste transportation software program - 15154

This paper provides a thorough review of RADCALC, the U.S. Department of Energy (DOE)-developed software tool to assist DOE sites in making radioactive material and waste packaging and transportation determinations in compliance with applicable Federal regulations and DOE Orders and Standards. There are more than 400 registered users of the RADCALC tool across the DOE complex. DOE has also authorized a limited number of users from certain universities and foreign countries. DOE periodically upgrades the software consistent with changing domestic and international requirements, as well as needs unique to DOE. Due to recent changes in regulatory requirements by the Department of Transportation (DOT), it is necessary that the current version of RADCALC should be updated in a timely manner. Prior to investing funds in software upgrades, DOE decided to evaluate the nature of changes required and level of operational support and looked for alternatives for meeting sites' operational needs. DOE formed a joint review team consisting of experts from Energy Facility Contractors Group (EFCOG) sites, commercial waste treatment facilities and the National Laboratories. This team evaluated the RADCALC software, commercially available software packages, and internal DOE site-developed programs against an established set of criteria. The team also reviewed and prioritized regulatory changes and user-recommended enhancements. Based on extensive review, the team recommended that DOE continue to support RADCALC noting that RADCALC is a cost-effective, technically robust tool that can perform complicated radioactive material shipping determinations. The tool promotes accuracy, consistency, and completeness between shipments by a single shipper, between shippers at a given site, and between sites. The isotopic coverage, decay algorithm and the range of calculations are without compare either within DOE or in industry in a tool of this kind. The team also recommended that DOE should actively promote RADCALC use throughout the DOE complex and consider cooperative arrangements with the Department of Defense or other government entities that may have similar needs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Double-magic nature of 132Sn and 208Pb through lifetime and cross-section measurements

Single-neutron states in 133Sn and 209Pb, which are analogous to single electrons outside of closed atomic shells in alkali metals, were populated by the (9Be,8Be) one-neutron transfer reaction in inverse kinematics using particle-gamma coincidence spectroscopy. In addition, the s1/2 single-neutron hole-state candidate in 131Sn was populated by (9Be,10Be). Doubly closed-shell 132Sn (radioactive) and 208Pb (stable) beams were used at sub-Coulomb barrier energies of 3 MeV per nucleon. Level energies, gamma-ray transitions, absolute cross sections, spectroscopic factors, asymptotic normalization coefficients, and excited-state lifetimes are reported and compared to shell-model expectations. The results include a new transition and precise level energy for the 3p1/2 candidate in 133Sn, new absolute cross sections for the 1h9/2 candidate in 133Sn and 3s1/2 candidate in 131Sn, and new lifetimes for excited states in 133Sn and 209Pb. This is the first report on excited-state lifetimes of 133Sn, which provide a unique signature of the single-neutron states and 132Sn double-shell closure.

Allmond, James↗

Rapid concentration and isotopic measurements of ultra-trace 235 U fission products with comparison to an ORIGEN isotope depletion model

We introduce the application of an automated online separation–direct analysis method, RAPID (Rapid Analysis of Post-Irradiation Debris), for the simultaneous measurement of both radioactive and stable fission isotopes from an irradiated highly-enriched uranium target. Developed for the measurement of the concentration and isotopic composition of over 40 elements down to the femtogram level, the RAPID method possesses the sensitivity, stability, and precision needed to achieve accurate, low-level analyses of elements of non-natural origin. The isotopic compositions and concentrations of key fission elements cesium, strontium, yttrium, lanthanum, cerium, praseodymium, neodymium, promethium, and samarium have been measured repeatedly over a six-week period. The validity of these measurements was confirmed using ORIGEN (Oak Ridge Isotope GENeration), an isotope depletion and decay modeling software, to within 1–3%.

07 ISOTOPE AND RADIATION SOURCES↗