Search NASA⌕ Search

SEARCH · Search NASA

Results for “Objectives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

GW190814: Gravitational Waves from the Coalescence of a 23 Solar Mass Black Hole with a 2.6 Solar Mass Compact Object

We report the observation of a compact binary coalescence involving a 22.2-24.3 M ⊙ black hole and a compact object with a mass of 2.50-2.67 M ⊙ (all measurements quoted at the 90% credible level). The gravitational-wave signal, GW190814, was observed during LIGO's and Virgo's third observing run on 2019 August 14 at 21:10:39 UTC and has a signal-to-noise ratio of 25 in the three-detector network. The source was localized to 18.5 deg 2 at a distance of 241 +41-41 Mpc; no electromagnetic counterpart has been confirmed to date. The source has the most unequal mass ratio yet measured with gravitational waves , 0.112+0.0090.008, , and its secondary component is either the lightest black hole or the heaviest neutron star ever discovered in a double compact-object system. The dimensionless spin of the primary black hole is tightly constrained to ≤0.07. Tests of general relativity reveal no measurable deviations from the theory, and its prediction of higher-multipole emission is confirmed at high confidence. We estimate a merger rate density of 1-23 Gpc -3 yr -1 for the new class of binary coalescence sources that GW190814 represents. Astrophysical models predict that binaries with mass ratios similar to this event can form through several channels, but are unlikely to have formed in globular clusters. However, the combination of mass ratio, component masses, and the inferred merger rate for this event challenges all current models of the formation and mass distribution of compact-object binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

Expanding the design space of stratospheric aerosol geoengineering to include precipitation-based objectives and explore trade-offs

Previous climate modeling studies demonstrate the ability of feedback-regulated, stratospheric aerosol geoengineering with injection at multiple independent latitudes to meet multiple simultaneous temperature-based objectives in the presence of anthropogenic climate change. However, the impacts of climate change are not limited to rising temperatures but also include changes in precipitation, loss of sea ice, and many more; knowing how a given geoengineering strategy will affect each of these climate metrics is vital to understanding the limits and trade-offs of geoengineering. Here, we first introduce a new method of visualizing the design space in which desired climate outcomes are represented by 2-D surfaces on a 3-D graph. Surface orientations represent how different injection choices influence that objective, and intersecting surfaces represent objectives which can be met simultaneously. Using this representation as a guide, we present simulations of two new strategies for feedback-regulated aerosol injection, using the Community Earth System Model with the Whole Atmosphere Community Climate Model – CESM1(WACCM). The first simultaneously manages global mean temperature, tropical precipitation centroid, and Arctic sea ice extent, while the second manages global mean precipitation, tropical precipitation centroid, and Arctic sea ice extent. Both simulations control the tropical precipitation centroid to within 5 % of the goal, and the latter controls global mean precipitation to within 1% of the goal. Additionally, the first simulation overcompensates sea ice, while the second undercompensates sea ice; all of these results are consistent with the expectations of our design space model. In addition to showing that precipitation-based climate metrics can be managed using feedback alongside other goals, our simulations validate the utility of our design space visualization in predicting our climate model behavior under a given geoengineering strategy, and together they help illustrate the fundamental limits and trade-offs of stratospheric aerosol geoengineering.

58 GEOSCIENCES↗

Systematic and objective evaluation of Earth system models: PCMDI Metrics Package (PMP) version 3

Systematic, routine, and comprehensive evaluation of Earth system models (ESMs) facilitates benchmarking improvement across model generations and identifying the strengths and weaknesses of different model configurations. By gauging the consistency between models and observations, this endeavor is becoming increasingly necessary to objectively synthesize the thousands of simulations contributed to the Coupled Model Intercomparison Project (CMIP) to date. The Program for Climate Model Diagnosis and Intercomparison (PCMDI) Metrics Package (PMP) is an open-source Python software package that provides quick-look objective comparisons of ESMs with one another and with observations. The comparisons include metrics of large- to global-scale climatologies, tropical inter-annual and intra-seasonal variability modes such as the El Niño–Southern Oscillation (ENSO) and Madden–Julian Oscillation (MJO), extratropical modes of variability, regional monsoons, cloud radiative feedbacks, and high-frequency characteristics of simulated precipitation, including its extremes. The PMP comparison results are produced using all model simulations contributed to CMIP6 and earlier CMIP phases. An important objective of the PMP is to document the performance of ESMs participating in the recent phases of CMIP, together with providing version-controlled information for all datasets, software packages, and analysis codes being used in the evaluation process. Among other purposes, this also enables modeling groups to assess performance changes during the ESM development cycle in the context of the error distribution of the multi-model ensemble. Quantitative model evaluation provided by the PMP can assist modelers in their development priorities. In this paper, we provide an overview of the PMP, including its latest capabilities, and discuss its future direction.

54 ENVIRONMENTAL SCIENCES↗

AMVOS: Additive Manufacturing Video Object Segmentation Dataset

This dataset provides labeled video frames from four additive manufacturing (AM) processes for video object segmentation (VOS) tasks. It contains 90 video segments comprising 900 individually annotated frames across five AM datasets: laser hot-wire directed energy deposition (LHW-DED), tungsten inert gas wire arc additive manufacturing (TIG-WAAM), plasma arc welding (PAW), visible-light polymer extrusion (visPolymer), and near-infrared polymer extrusion (irPolymer). Each video segment consists of 10 contiguous frames with corresponding pixel-level object instance annotations. Depending on the process, two of four object classes are labeled per frame: Melt Pool, Feed Wire, Nozzle, or Material. Raw frames are provided as .jpg files and annotations as palettized .png files. The dataset follows the directory structure of established VOS benchmarks (DAVIS, YouTube-VOS, MOSE), enabling direct integration into VOS model training and evaluation pipelines for foundation model fine-tuning, domain adaptation, or zero-shot performance benchmarking. Data was collected at Oak Ridge National Laboratory's Manufacturing Demonstration Facility.

Wetzel, Jon [ORNL]↗

System locates randomly placed remote objects

System to locate objects submerged underwater uses active/passive sonar techniques in which a transmitter is attached to the object to be recovered and a receiver is used for search. The system is rugged, has a long term operating life, and furnishes a precise bearing on the object.

Lovelady, R. W.↗

Improvements in Ross type astrometric objectives

It is shown that aspheric deformations of the first and fourth elements of the four element Ross objective can be introduced to permit one to obtain improved color corrections for astrometric purposes. The usual monochromatic aberrations are as well corrected as for the standard Ross lens. In addition, one can eliminate or reduce additional aberrations, such as secondary spectrum, chromatic spherical aberration, chromatic coma and chromatic distortion. The resulting objectives are suitable for use as intermediate and long focus astrometric objectives covering large angle fields.

Baker, J.↗

The optical object identified with 3C 455.

It is shown that the optical object identified with 3C 455 is a quasi-stellar object with a redshift z = 0.543. The QSO is situated 23 sec northeast of the S0 galaxy NGC 7413, which has a redshift of 0.0332. It is pointed out that the discovery of the present object in a position so close to a galaxy is further evidence in favor of the existence of a physical association between 3C QSOs and bright galaxies.

Arp, H. C.↗

2.2- and 3.5-micron polarization measurements of the Becklin-Neugebauer object in the Orion Nebula.

Independent measurements of the Becklin-Neugebauer (BN) object in the Orion Nebula yield large values of linear polarization in wavelength bands centered at 2.2 and 3.4 microns. The 10 to 15% polarization at 2.2 microns of the BN object is larger than any yet measured for an extraterrestrial object. The large polarization probably originates from the scattering of the radiation by dust grains.

Loer, S. J.↗

Improvements in estimating proportions of objects from multispectral data

Methods for estimating proportions of objects and materials imaged within the instantaneous field of view of a multispectral sensor were developed further. Improvements in the basic proportion estimation algorithm were devised as well as improved alien object detection procedures. Also, a simplified signature set analysis scheme was introduced for determining the adequacy of signature set geometry for satisfactory proportion estimation. Averaging procedures used in conjunction with the mixtures algorithm were examined theoretically and applied to artificially generated multispectral data. A computationally simpler estimator was considered and found unsatisfactory. Experiments conducted to find a suitable procedure for setting the alien object threshold yielded little definitive result. Mixtures procedures were used on a limited amount of ERTS data to estimate wheat proportion in selected areas. Results were unsatisfactory, partly because of the ill-conditioned nature of the pure signature set.

Horwitz, H. M.↗

Derivation of formulas for root-mean-square errors in location, orientation, and shape in triangulation solution of an elongated object in space

Formulas are derived for the root-mean-square (rms) displacement, slope, and curvature errors in an azimuth-elevation image trace of an elongated object in space, as functions of the number and spacing of the input data points and the rms elevation error in the individual input data points from a single observation station. Also, formulas are derived for the total rms displacement, slope, and curvature error vectors in the triangulation solution of an elongated object in space due to the rms displacement, slope, and curvature errors, respectively, in the azimuth-elevation image traces from different observation stations. The total rms displacement, slope, and curvature error vectors provide useful measure numbers for determining the relative merits of two or more different triangulation procedures applicable to elongated objects in space.

Long, S. A. T.↗

Kinetic theory analysis of solar wind interaction with planetary objects

A purely kinetic treatment is proposed for the interaction of the solar wind with any small planetary object. Small refers to those cases where the solar wind proton's thermal gyroradius is arbitrarily taken to be greater than 0.1 radius of the object under investigation. The 'object' may possibly include an ionosphere or magnetosphere. The collisionless Boltzmann equation, neglecting the magnetic field, is used to calculate steady-state profiles of density and velocity around the obstacle. A low density plasma void in the umbral region and a compression in the penumbral region are clearly found. The present technique, despite its neglect of the interplanetary magnetic field, is proposed as an alternative zeroth order approach to the continuum, local magnetic anomaly, and guiding center approaches used by others for the particular case of moon. Some recent, potentially relevant, observations on and in front of the moon are discussed.

Wu, S. T.↗

Detection of new celestial objects at far-infrared wavelengths

During a high-altitude balloon flight, sources of far-infrared radiation have been detected with apparent fluxes greater than or about equal to 3 pW/sq cm in the spectral band from 50 to 500 microns. While the sources are not uniquely identifiable with any well-known class of celestial objects, two associations should be noted. Many of the objects lie close to local stars; there is also a tendency to cluster around the ecliptic plane. Alternatively, a new class of celestial objects may have been observed.

Friedlander, M. W.↗

Emission-line strengths and the chemical compositions of quasi-stellar objects

Estimates of emission-line strengths in 160 QSOs are listed. They are used, together with those for 60 objects published earlier, to compile a table of rest-frame equivalent widths for a composite QSO containing 28 lines seen in objects with z from 0.06 to 3.53. Models are computed for matter partially filling a spherical volume, ionized by ultraviolet flux from a central object and optically thick with absorption from heavy elements taken into account. Constant temperature and density are taken for the He II region, where most of the important lines are emitted. Allowance is made for lower and higher temperatures in the H I and He III regions. Emergent emission-line equivalent widths are computed and compared with the observations. An abnormally low helium abundance is not needed to achieve a fit, since the only anomalously weak line is He II 4686 A whose upper level may be depopulated by stimulated emission of He II 1215 A caused by very strong L-alpha 1216 A flux.

Chan, Y.-W. T.↗

Calculation of the twilight visibility function of near-sun objects

The visibility function, defined here as the magnitude difference between the excess brightness of a given object and that of the background sky, of near-sun objects during twilight is obtained from a general calculation which considers the twilight sky background, atmospheric extinction, and night glow. Visibility curves are computed for a number of cases in which observations have been recorded, particularly that of comet Kohoutek. For this object, the computed visibility maxima agree well in time with the reported times of observation.

Kastner, S. O.↗

An extrasolar extreme-ultraviolet object. II - The nature of HZ 43

A variety of data are presented concerning the spectrum, distance, temperature, and evolutionary state of the hot white dwarf HZ 43, the first extrasolar object to be detected in the EUV band. The data include spectrophotometry of the star and its red dwarf companion (HZ 43B), a trigonometric parallax for the star, its tangential velocity, and results of soft X-ray and EUV observations. The main conclusions are that: (1) the spectrum of HZ 43A is that of a hot DAwk star, (2) HZ 43B is a dM3.5e star, (3) the distance of the system is about 65 pc, (4) the tangential velocity is not atypical of white dwarfs, and (5) the stellar energy distribution of HZ 43A is well fitted by a black body with an effective temperature of approximately 110,000 K. Evolutionary implications of the existence of an object as hot as HZ 43A are briefly considered, and it is suggested that the progenitors of hot DA stars must include objects hotter than spectral type sdB, with logical possibilities being nuclei of planetary nebulae and sdO stars.

Margon, B.↗

Identification and promulgation of objectives for OAST R and T programs, Task 2

Overall perspectives and guidelines are discussed for defining and promulgating NASA's Office of Aeronautics and Space Technology (OAST) objectives to meet national needs and goals in aeronautical, space, and nuclear technology. Emphasis is placed on the practicality of ultimately instituting objective-setting processes within the normal OAST operation, and of establishing quantitative measures to be used as a working management tool in determining the degree to which the objectives have been or are being met.

Source record↗

New infrared objects associated with OH masers

Results of a search for IR radiation at 10 microns from a sample of OH maser sources are reported. An IR source is discovered near each of six OH masers which emit mainly at 1612 MHz in two distinct velocity ranges. It is shown that all the sources have varied with time, that two sources have exhibited significant variations in color temperature, and that the energy distributions of the six objects over the spectral range from 2 to 20 microns fall into two categories. Absorption in the 2.3-micron band of CO is detected in two sources, and four are found to display substantial silicate absorption features. The energy distributions of the sources indicate that pumping by 35-micron photons is feasible, but 2.8-micron pumping is very unlikely; the distributions are best explained as emission from very thick dust shells at temperatures of about 500 K. The data are taken as supporting the hypothesis that every double-peaked OH maser emitting principally at 1612 MHz is associated with an IR object. The nature of the objects inside the dust shells and their evolutionary state are briefly discussed.

Evans, N. J., II↗