Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observer Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

ENSO Diversity Simulated in a Revised Cane-Zebiak Model

The El Niño-Southern Oscillation (ENSO) phenomenon features rich sea surface temperature (SST) spatial pattern variations dominated by the Central Pacific (CP) and Eastern Pacific (EP) patterns during its warm phase. Understanding such ENSO pattern diversity has been a subject under extensive research activity. To provide a framework for unveiling the fundamental dynamics of ENSO diversity, an intermediate coupled model based on the Cane-Zebiak-type framework, named RCZ, is established in this study. Compared with the original Cane-Zebiak model, RCZ consists of revised model formulation and well-tuned parameterization schemes. All model components are carefully validated against the observations via the standalone mode, in which the observed anomalous SST (wind stress) forcing is prescribed to drive the atmospheric (oceanic) component. The superiority of RCZ’s model components over those in the original Cane-Zebiak model is evidenced by their better performance in simulating the observations. Coupled simulation with RCZ satisfactorily reproduces aspects of the observed ENSO characteristics, including the spatial pattern, phase-locking, amplitude asymmetry, and, particularly, ENSO diversity/bi-modality. RCZ serves as a promising tool for studying dynamics of ENSO diversity as it resolves most of the relevant processes proposed in the literature, including atmospheric nonlinear convective heating, oceanic nonlinear dynamical heating, and the ENSO/westerly wind burst interaction.

54 ENVIRONMENTAL SCIENCES↗

The Thermal Response of a Packed Bed Thermal Energy Storage System upon Saturated Steam Injection Using Distributed Temperature Sensing

The effectiveness of a thermal energy storage (TES) system is typically characterized with the help of thermal stratification or temperature gradients along the direction of heat injection, which is typically the flow direction of heat transfer fluid. The steepness of temperature gradients are a direct indicator of the effectiveness or efficiency of the heat storage or dispatch process. The temperature gradient evolution along the packed bed of ceramic particles upon saturated steam injection is presented in this work. Distributed temperature sensing based on optical frequency domain reflectometry was deployed in a packed bed of ceramic particles to capture the thermal front evolution in the axial direction. The physical processes accompanying steam injection in packed beds are complex due to phase change, transitioning two-phase flow, and changes in condensate accumulation. Therefore, the variation of thermal response of the TES system for various steam injection flow rates was experimentally studied using a high-resolution distributed temperature sensing system in a chemically inert alumina particle-packed bed. Distinct zones of different heat transfer modes were observed during the steam injection experiments. A distinct conduction zone, evident from diffuse thermal fronts, was observed at low flow rates, and these thermal gradients became sharper as the flow rate increased. The diffuse thermal fronts in the heat storage media suggest a low exergy efficiency of the TES system, as energy losses started initiating before a significant fraction of the bed was saturated with steam.

25 ENERGY STORAGE↗

In Situ and Post-Mortem Characterizations of Ultrasonic Spot Welded AZ31B and Coated Dual Phase 590 Steel Joints

Ultrasonic spot welding using different welding conditions was applied to join dissimilar metals of galvanized DP590 steel and AZ31B magnesium sheets. In situ high-speed imaging, digital image correlation, and infrared thermography were utilized to quantitatively study the interfacial relative motion, surface indentation, and heat generation across the joint faying interface and the sheet/sonotrode interfaces under the welding condition of moderate welding power and short welding time. For welds made with high power and long welding time, lap shear tensile tests as well as fatigue tests were carried out. Different fracture modes were observed after the lap shear tensile tests and fatigue tests performed under different peak loads. Post-weld cross-sectional analysis with scanning electron microscopy coupled with energy dispersive X-Ray spectroscopy revealed the variation of morphology and chemical composition at the joint interface for welds made with different welding conditions.

36 MATERIALS SCIENCE↗

Wayne—A Simulator for HST WFC3 IR Grism Spectroscopy

Wayne is an algorithm that simulates Hubble Space Telescope Wide Field Camera 3 (WFC3) grism spectroscopic frames, including sources of noise and systematics. It can simulate both staring and spatial scan modes, and observations such as the transit and the eclipse of an exoplanet. Unlike many other instrument simulators, the focus of Wayne is on creating frames with realistic systematics in order to test the effectiveness of different data analysis methods in a variety of different scenarios. This approach is critical for method validation and optimizing observing strategies. In this paper we describe the implementation of Wayne for WFC3 in the near-infrared channel with the G102 and G141 grisms. We compare the simulations to real data obtained for the exoplanet HD 209458b, to verify the accuracy of the simulation. The software is now available as open source at https://github.com/ucl-exoplanets/wayne.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of High Magnetic Field on Access to Stationary H-modes and Pedestal Characteristics in Alcator C-Mod

Recent Alcator C-Mod experiments have explored access to and characteristics of H-modes at magnetic fields approaching 8 T, the highest field achieved to date in a diverted tokamak. The H-modes originated from L-mode densities ranging from $1.1 \times 10^{20} m^{-3}$ to $2.8 \times 10^{20} m^{-3}$, allowing insight into the density dependence of the H-mode power threshold at high magnetic field. This dependence is compared to predictions from the ITPA scaling law (\cite{martin2008power}), finding that the law is approximately accurate at 7.8 T. However, the law underpredicted the high density H-mode threshold at lower magnetic field in previous C-Mod experiments (\cite{ma2012scaling}), \hl{suggesting that the overall dependence of the threshold on magnetic field is weaker than predicted by the scaling law.} The threshold data at 7.8 T also indicates that the onset of a low density branch at this magnetic field on C-Mod occurs below $1.4 \times 10^{20} m^{-3}$, which is lower than predicted by an existing model for low density branch onset. The H-modes achieved steady-state densities ranging from $2.3 \times 10^{20} m^{-3}$ to $4.4 \times 10^{20} m^{-3}$, and higher transient densities, and had values of $q_{95}$ from 3.3 to 6.0. This parameter range allowed the achievement of all three types of H-mode routinely observed at lower magnetic field on C-Mod: the stationary, ELM-suppressed enhanced D-alpha (EDA) regime, seen at high densities and high values of $q_{95}$; the nonstationary ELM-free regime, seen at lower densities and values of $q_{95}$; and the ELMy regime, seen at low density, moderate $q_{95}$, and specialized plasma shape. The parameter space in which these regimes occur at 7.8 T is consistent with lower magnetic field experience. Pressure pedestal height at 7.8 T is compared to EPED \cite{snyder2009development, snyder2011first} predictions, and a scaling law for EDA density pedestal height developed between 4.5 and 6.0 T is updated to include fields from 2.7 T to 7.8 T. Overall, this analysis increases confidence in the use of low magnetic field experience to predict some elements of high magnetic field tokamak behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the very high energy confinement observed in super H-mode DIII-D experiments

Analysis of recent super H-mode experiments on DIII-D shows that high rotation, not high pedestal, plays the essential role in achieving very high confinement H98y2 > 1.5. Very high confinement is reached early on in the H-mode phase of these discharges, when the pedestal is still very low, but after the toroidal rotation has already built-up to very high levels in the core. As the discharge evolves, the rotation drops, and so does the energy confinement, despite a sustained very high pressure pedestal. During this evolution, the confinement quality is linearly correlated with the core toroidal rotation, which varies according to different levels of injected neutral beam torque per particle. Core transport modeling shows that the contribution from rotation in the E×B shear is responsible for confinement quality significantly in excess of standard H-mode (H98y2 ∼ 1).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasmaspheric hiss.

A relatively steady band of ELF hiss has been detected by the OGO 5 search coil magnetometer on almost every passage through the plasmasphere; except for an anomalous region of the dayside at high geomagnetic latitudes, the emissions terminate abruptly at the plasmapause and are therefore referred to as 'plasmaspheric hiss.' A preliminary statistical study of the properties of the observed whistler mode turbulence has yielded the following characteristics: the waves are band limited with a sharp lower-frequency cutoff and a more diffuse upper-frequency cutoff; power spectra show a well-defined maximum near a few hundred hertz, the peak intensities generally ranging between 10 to the minus 7th power and 0.00001 gamma squared/Hz; the wave energy is spread over a bandwidth of a few hundred hertz, and corresponding wideband amplitudes are 5 to 50 milligamma; the waves are highly turbulent in nature and show little tendency toward definite polarization.

Thorne, R. M.↗

A balloon-borne 1 meter telescope for far-infrared astronomy

The flight of a balloon-borne one-meter telescope for infrared astronomy in the wavelength interval of 40 to 240 microns is discussed. The gyro-stabilized telescope mapped the intensity of the far infrared radiation from NGC 7538, Mars, the Orion Nebula, and W3 with a resolution of one minute and from selected regions of these sources with a resolution of 30 seconds. The infrared detection is described and its capabilities are analyzed. The instrumentation, orientation system, and modes of observation of the telescope are defined.

Fazio, G. G.↗

Progress in the development of the hollow fiber sodium-sulfur secondary cell

This report describes the development and status of the sodium-sulfur secondary cell which uses fine hollow glass fibers as the electrolyte. Laboratory size cells containing up to 7000 fibers and having capacities up to 5 ampere-hours have been built and operated. These cells have been run at various cycle depths up to 95% of capacity. Lifetime does not depend on depth of discharge up to at least 50% depth and possibly deeper. Rates of charge and discharge of the nominally one hour cells have been varied from three times the design rate to 0.05 times the design rate. Smaller cells operate with essentially no internal resistance increase during their lifetimes of over four months on continuous charge/discharge at the one hour rate. Larger cells assembled with somewhat different mechanical assembly techniques have shorter lives. Two types of failure modes are observed: progressive weakening and breaking of the fibers inside the cell assembly, and fiber breakage at the fiber/tube sheet interface.

Levine, C. A.↗

Fatigue of notched fiber composite laminates. Part 1: Analytical model

A description is given of a semi-empirical, deterministic analysis for prediction and correlation of fatigue crack growth, residual strength, and fatigue lifetime for fiber composite laminates containing notches (holes). The failure model used for the analysis is based upon composite heterogeneous behavior and experimentally observed failure modes under both static and fatigue loading. The analysis is consistent with the wearout philosophy. Axial cracking and transverse cracking failure modes are treated together in the analysis. Cracking off-axis is handled by making a modification to the axial cracking analysis. The analysis predicts notched laminate failure from unidirectional material fatique properties using constant strain laminate analysis techniques. For multidirectional laminates, it is necessary to know lamina fatique behavior under axial normal stress, transverse normal stress and axial shear stress. Examples of the analysis method are given.

Mclaughlin, P. V., Jr.↗

Dual-polarized ring lasers

Simultaneous laser oscillation of four nondegenerate polarization and propagation direction eigenstates of a single TEM-00 mode was observed in a ring laser cavity. The observed polarization and frequency properties of the ring laser were analyzed in terms of the Jones matrix calculus.

Sanders, V. E.↗

Diffuse Jovian aurora influenced by plasma injection from Io

The paper demonstrates that the broad band of whistler-mode waves observed within the high density torus surrounding Io is consistent with electron cyclotron generation. Cyclotron resonant instability of Jovian energetic electrons is enhanced due to the lower resonant electron energy within the equatorial high density plasma torus surrounding the orbit of Io. The higher energy resonant electron scattering and the corresponding energetic electron lifetimes indicate that an efficient local acceleration process is required to replenish the precipitating relativistic electrons. Calculated energy deposition into the Jovian atmosphere should provide a dominant source of middle atmospheric ionization and excite a continuous band of diffuse auroral emission. It is suggested that the diffuse Jovian aurora should be influenced by the variable volcanic activity on Io which is thought to be an important source of plasma, since the cyclotron scattering process is strongly influenced by the ambient equatorial thermal plasma density.

Thorne, R. M.↗

Correlated whistler and electron plasma oscillation bursts detected on ISEE-3

The ISEE-3 plasma wave instrument detects associated bursts of electron plasma oscillations and whistler mode waves at an average rate of event one every two days. The plasma wave measurements give the electron number density, and simultaneously measured E and B amplitudes are used to deduce an index of refraction consistent with whistler mode propagation for the measured number density and magnetic field. Burst durations are a few minutes, with some trains of bursts lasting up to an hour. Individual spectral scans (two per second) reveal that the whistler and plasma wave amplitude-time profiles differ within a burst. Peak plasma wave amplitudes are near one mV/m, and the peak whistler mode energy density exceeds that of the plasma oscillations by about a factor 100. The frequency of the whistler mode wave observed in one well diagnosed event agrees with the predictions of the heat flux whistler instability theory. The associated plasma wave instability probably requires a bump-on-tail feature in the heat flux electron component, possibly due to impulsive heating elsewhere on the field-line connecting to ISEE-3.

Kennel, C. F.↗

Notched graphite polymimide composites at room and notched graphite polymide composites at room and elevated temperatures

The fracture behavior in graphite/polyimide (Gr/PI) Celion 6000/PMR-15 composites was characterized. Emphasis was placed on the correlation between the observed failure modes and the deformation characteristics of center-notched Gr/Pl laminates. Crack tip damage growth, fracture strength and notch sensitivity, and the associated characterization methods were also examined. Special attention was given to nondestructive evaluation of internal damage and damage growth, techniques such as acoustic emission, X-ray radiography, and ultrasonic C-scan. Microstructural studies using scanning electron microscopy, photomicrography, and the pulsed nuclear magnetic resonance technique were employed as well. All experimental procedures and techniques are described and a summary of representative results for Gr/Pl laminates is given.

Awerbuch, J.↗

The Mg 2 h and k lines in a sample of dMe and dM stars

Both Mg II h and k line fluxes are presented for a sample of 4 dMe and 3 dM stars obtained with the IUE satellite in the long wavelength, low dispersion mode. The observed fluxes are converted to stellar surface flux units and the importance of chromospheric non radiative heating in this sample of M dwarf stars is intercompared. In addition, the net chromospheric radiative losses due to the Ca II H and K lines in those stars in the sample for which calibrated Ca II H and K line data exist are compared. Active region filling factors which likely give rise to the observed optical and ultraviolet chromospheric emission are estimated. The implications of the results for homogeneous, single component stellar model chromospheres analyses are discussed.

Giampapa, M. S.↗

Effects of temperature fluctuations of IUE data quality

Analysis of IUE calibration lamp images shows that variation in the temperature of the scientific instrument causes shifts in the location of the spectral format with respect to the reseau grid on the detector and in the location of the reseaux themselves. In high dispersion, a camera head amplifier temperature difference of 6C corresponds to a shift of 4 pixels in the spectral format for LWR and 2 pixels for SWP along the dispersion direction. Shifts perpendicular to the disperson (for the same temperature difference) are less than one pixel for both cameras. In low dispersion spectra, the shifts are similar but orthogonal to those described above with the larger motion lying in the direction perpendicular to the dispersion. In both dispersion modes, the observed shifts are apparently independent of wavelength. In high dispersion, the constant pixel shift mimics a constant velocity error.

Thompson, R. W.↗