Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phased Array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

NuSTAR observations of magnetar 1E 1841–045

We report new spectral and temporal observations of the magnetar 1E 1841–045 in the Kes 73 supernova remnant obtained with the Nuclear Spectroscopic Telescope Array. Combined with new Swift and archival XMM-Newton and Chandra observations, the phase-averaged spectrum is well characterized by a blackbody plus double power law, in agreement with previous multimission X-ray results. However, we are unable to reproduce the spectral results reported based on Suzaku observations. The pulsed fraction of the source is found to increase with photon energy. The measured rms pulsed fractions are ∼12% and ∼17% at ∼20 and ∼50 keV, respectively. We detect a new feature in the 24-35 keV band pulse profile that is uniquely double peaked. This feature may be associated with a possible absorption or emission feature in the phase-resolved spectrum. We fit the X-ray data using the recently developed electron-positron outflow model by Beloborodov for the hard X-ray emission from magnetars. This produces a satisfactory fit, allowing a constraint on the angle between the rotation and magnetic axes of the neutron star of ∼20° and on the angle between the rotation axis and line of sight of ∼50°. In this model, the soft X-ray component is inconsistent with a single blackbody; adding a second blackbody or a power-law component fits the data. The two-blackbody interpretation suggests a hot spot of temperature kT ≈ 0.9 keV occupying ∼1% of the stellar surface.

79 ASTRONOMY AND ASTROPHYSICS↗

Reducing leakage current and enhancing polarization in multiferroic 3D super-nanocomposites by microstructure engineering

Abstract Multiferroic materials have generated great interest due to their potential as functional device materials. Nanocomposites have been increasingly used to design and generate new functionalities by pairing dissimilar ferroic materials, though the combination often introduces new complexity and challenges unforeseeable in single-phase counterparts. The recently developed approaches to fabricate 3D super-nanocomposites (3D‐sNC) open new avenues to control and enhance functional properties. In this work, we develop a new 3D‐sNC with CoFe 2 O 4 (CFO) short nanopillar arrays embedded in BaTiO 3 (BTO) film matrix via microstructure engineering by alternatively depositing BTO:CFO vertically-aligned nanocomposite layers and single-phase BTO layers. This microstructure engineering method allows encapsulating the relative conducting CFO phase by the insulating BTO phase, which suppress the leakage current and enhance the polarization. Our results demonstrate that microstructure engineering in 3D‐sNC offers a new bottom–up method of fabricating advanced nanostructures with a wide range of possible configurations for applications where the functional properties need to be systematically modified.

36 MATERIALS SCIENCE↗

Manipulating microwaves with magnetic-dipolar-mode vortices

There has been a surge of interest in the subwavelength confinement of electromagnetic fields. It is well known that, in optics, subwavelength confinement can be obtained from surface plasmon (quasielectrostatic) oscillations. In this article, we propose to realize subwavelength confinement in microwaves by using dipolar-mode (quasimagnetostatic) magnon oscillations in ferrite particles. Our studies of interactions between microwave electromagnetic fields and small ferrite particles with magnetic-dipolar-mode (MDM) oscillations show strong localization of electromagnetic energy. MDM oscillations in a ferrite disk are at the origin of topological singularities resulting in Poynting vector vortices and symmetry breakings of the microwave near fields. We show that new subwavelength microwave structures can be realized based on a system of interacting MDM ferrite disks. Wave propagation of electromagnetic signals in such structures is characterized by topological phase variations. Interactions of microwave fields with an MDM ferrite disk and MDM-disk arrays open a perspective for creating engineered electromagnetic fields with unique symmetry properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SECA Coal-Based Systems - FuelCell Energy, Inc.

The overall goal of this U.S. Department of Energy (DOE) sponsored project is the development of solid oxide fuel cell (SOFC) cell and stack technology suitable for use in highly-efficient, economically-competitive central generation power plant facilities fueled by coal synthesis gas (syngas). This program incorporates the following supporting objectives: • Reduce SOFC-based electrical power generation system cost to $700 or less (2007 dollars) for a greater than 100 MW Integrated Gasification Fuel Cell (IGFC) power plant, exclusive of coal gasification and CO 2 separation subsystem costs. • Achieve an overall IGFC power plant efficiency of at least 50%, from coal (higher heating value or HHV) to AC power (exclusive of CO 2 compression power requirement). • Reduce the release of CO2 to the environment in an IGFC power plant to no more than 10% of the carbon in the syngas. • Increase SOFC stack reliability to achieve a design life of greater than 40,000 hours. At the inception of the project, the efforts were focused on research, design and testing of prototype planar SOFC power generators for stationary applications. FuelCell Energy, Inc. successfully completed the initial stage of the project by meeting the program metrics, culminating in delivery and testing of a 3 kW system at National Energy Technology Laboratory (NETL). Subsequently, the project was re-aligned into a three phase effort with the main goal to develop SOFC technology for application in coal-fueled power plants with >90% carbon capture. Phase I of the Coal-based efforts focused on cell and stack size scale-up with concurrent enhancement of performance, life, cost, and manufacturing characteristics. Also in Phase I, design and analysis of the baseline (greater than 100 MW) power plant system—including concept identification, system definition, and cost analysis—was conducted. Phase II efforts focused on development of a ≥25 kW SOFC stack tower incorporating multiple stack building blocks of scaled-up cells, suitable for integration into a large-scale fuel cell power module. Activities in Phase II also included the development of the baseline system, factory cost estimate for the baseline plant’s power block, and conceptual design of a natural gas fueled sub-MW system to be used for testing and verification of the fuel cell stacks in a system environment. The specific objective for Phase III was the validation of the performance and robustness of stacks and scaled stack arrays suitable for use in large-scale power generation systems such as an IGFC with reliable, fail-safe operation being of paramount importance. The work culminated in the verification tests of a 60 kW SOFC stack module in a power plant facility. This final technical report summarizes the progress made during the project period. Significant progress was made in the areas of cell and stack technology development, stack module design, sub-scale module tests, Baseline Power Plant system development and Proof-of- Concept Module unit design. The development of this technology will significantly advance the nation’s energy security and independence interests while simultaneously addressing environmental concerns, including greenhouse gas emissions and water usage.

01 COAL, LIGNITE, AND PEAT↗

ARRIVAL TIME DIFFERENCES BETWEEN GRAVITATIONAL WAVES AND ELECTROMAGNETIC SIGNALS DUE TO GRAVITATIONAL LENSING

In this study we demonstrate that general relativity predicts arrival time differences between gravitational wave (GW) and electromagnetic (EM) signals caused by the wave effects in gravitational lensing. The GW signals can arrive earlier than the EM signals in some cases if the GW/EM signals have passed through a lens, even if both signals were emitted simultaneously by a source. GW wavelengths are much larger than EM wavelengths; therefore, the propagation of the GWs does not follow the laws of geometrical optics, including the Shapiro time delay, if the lens mass is less than approximately 10{sup 5} M {sub ⊙}( f /Hz){sup −1}, where f is the GW frequency. The arrival time difference can reach ∼0.1 s ( f /Hz){sup −1} if the signals have passed by a lens of mass ∼8000 M {sub ⊙}( f /Hz){sup −1} with the impact parameter smaller than the Einstein radius; therefore, it is more prominent for lower GW frequencies. For example, when a distant supermassive black hole binary (SMBHB) in a galactic center is lensed by an intervening galaxy, the time lag becomes of the order of 10 days. Future pulsar timing arrays including the Square Kilometre Array and X-ray detectors may detect several time lags by measuring the orbital phase differences between the GW/EM signals in the SMBHBs. Gravitational lensing imprints a characteristic modulation on a chirp waveform; therefore, we can deduce whether a measured arrival time lag arises from intrinsic source properties or gravitational lensing. Determination of arrival time differences would be extremely useful in multimessenger observations and tests of general relativity.

79 ASTRONOMY AND ASTROPHYSICS↗

ProtoDUNE Anode Plane Assembly

ProtoDUNE is a test bed for the Deep Underground Neutrino Experiment, an international physics project hosted at the Department of Energy's Fermilab. One of the ProtoDUNE detectors, which are being constructed at CERN, is a single-phase neutrino detector that uses liquid argon. It will require a number of anode plane arrays, special panels made of wire, to detect the signature of a neutrino interaction in the argon bath. This is a glimpse into the process of fabricating these planes, some of which are being created at the University of Wisconsin-Madison. Learn more about the ProtoDUNE detectors here: https://www.symmetrymagazine.org/article/the-biggest-little-detectors

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Manipulation of individual superconducting vortices and stick-slip motion in periodic pinning arrays

We numerically examine the manipulation of superconducting vortices interacting with a moving trap representing a magnetic force tip translating across a superconducting sample containing a periodic array of pinning sites. As a function of the tip velocity and coupling strength, we find five distinct dynamic phases, including a decoupled regime where the vortices are dragged a short distance within a pinning site, an intermediate coupling regime where vortices in neighboring pinning sites exchange places, an intermediate trapping regime where individual vortices are dragged longer distances and exchange modes of vortices occur in the surrounding pins, an intermittent multiple trapping regime where the trap switches between capturing one or two vortices, and a strong coupling regime in which the trap permanently captures and drags two vortices. In some regimes we observe the counterintuitive behavior that slow moving traps couple less strongly to vortices than faster moving traps; however, the fastest moving traps are generally decoupled. The different phases can be characterized by the distances the vortices are displaced and the force fluctuations exerted on the trap. We find different types of stick-slip motion depending on whether vortices are moving into and out of pinning sites, undergoing exchange, or performing correlated motion induced by vortices outside of the trap. Finally, our results are general to the manipulation of other types of particle-based systems interacting with periodic trap arrays, such as colloidal particles or certain types of frictional systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal Oxide Nano-Array Catalysts for Low Temperature Diesel Oxidation. Final Report

In this project, a series of metal oxide nanostructure arrays (nano-arrays) with or without metal decoration, have been successful integrated onto monolithic honeycombs with well-defined size, shape, and chemical compositions, forming a new type of monolithic catalysts. These catalysts have displayed good durability and catalytic performance toward various gas phase catalytic reactions, while showing good potential of reducing the material usage. Specifically in situ grown onto monolithic honeycomb substrates, the metal oxide nanostructure arrays (nano-arrays) (e.g., CeO 2 , Co 3 O 4 , (Cu, Mn)O 2 , (La, Sr)MnO 3 , TiO 2 , etc.), with or without Pt-group metal (PGM) decoration, have displayed good durability and catalytic performance toward catalytic oxidation of hydrocarbons and CO, while showing good potential of reducing the material (noble metal and metal oxides) usage. As unique supports, the nano-array ‘forest-like’ structure configuration proves to improve the dispersion and immobilization of metal nanocatalysts under various aging and reactive conditions, besides the lower pressure drop and improved adherence to the monolith substrates over wash-coated catalysts. On the other hand, electronic interactions between metals and nano-array support are found to be adjustable toward favoring catalytic oxidation while improving the catalyst robustness. Furthermore, chemical leaching treatment in these metal oxide based catalysts could help tune their chemical and structural characteristics, boosting low temperature oxidation reactivity while maintaining robustness. Both CeO 2 and TiO 2 nano-array supported PGM catalysts have shown promising low temperature reactivity with 90% conversion at temperatures approaching 150oC toward CO, HC, and NO x oxidation under both probe and simulated exhaust conditions.

36 MATERIALS SCIENCE↗

An ASIC With A Low Power Multichannel ADC For Energy and Timing Measurements

Densely packed gamma-ray imaging and spectroscopy instruments employing high performance multichannel electronics occupy large volume and dissipate excessive power. Therefore, the availability of a low power application specific integrated circuit (ASIC) incorporating multiple channels of ADCs and post processing electronics is of critical importance for nuclear physics (NP) instrumentation. Currently available 12-bit 0.2GSps ADC channel count is usually not exceeding 8. Coarse technologies at 130nm or 180nm node usually used for implementing ADCs do not permit achieving low power consumption and cannot be arrayed on a chip. Thus, a new ADC device is required to satisfy the need of electronics for NP and commercial systems. The research carried out during the Phase I project aimed to prove the feasibility of implementing a 28nm CMOS based 32 channel 12-bit ADC ASIC. Most importantly for NP instrumentation, in addition to including a 32-channel ADC array, our proposed ASIC aims to provide digitized signal post-processing function. In current systems digitized signal post-processing is implemented in FPGAs. Thus, the functionality our ASIC provides is equivalent to the functionality currently realized using 8 ADC parts (each containing 4 channels), an FPGA and a great number of wiring between the ADCs and the FPGA. By using a single part instead of 9, our solution offers a great reduction in volume, power consumption and cost.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pressure-Induced Disordered Substitution Alloy in Sb[subscript 2]Te[subscript 3]

A new type of disordered substitution alloy of Sb and Te at above 15.1 GPa was discovered by performing in situ high-pressure angle-dispersive X-ray diffraction experiments on antimony telluride (Sb{sub 2}Te{sub 3}), a topological insulator and thermoelectric material, at room temperature. In this disordered substitution alloy, Sb{sub 2}Te{sub 3} crystallizes into a monoclinic structure with the space group C2/m, which is different from the corresponding high-pressure phase of the similar isostructural compound Bi{sub 2}Te{sub 3}. Above 19.8 GPa, Sb{sub 2}Te{sub 3} adopts a body-centered-cubic structure with the disordered atomic array in the crystal lattice. The in situ high-pressure experiments down to about 13 K show that Sb{sub 2}Te{sub 3} undergoes the same phase-transition sequence with increasing pressure at low temperature, with almost the same phase-transition pressures.

36 MATERIALS SCIENCE↗

Bimodality in Arrays of In{sub 0.4}Ga{sub 0.6}As Hybrid Quantum-Confined Heterostructures Grown on GaAs Substrates

Hybrid quantum-confined heterostructures grown by metal-organic vapor-phase epitaxy (MOVPE) via the deposition of In{sub 0.4}Ga{sub 0.6}As layers with various nominal thicknesses onto vicinal GaAs substrates are studied by photoluminescence spectroscopy and transmission electron microscopy. The photoluminescence spectra of these structures show the superposition of two spectral lines, which is indicative of the bimodal distribution of the size and/or shape of light-emitting objects in an array. The dominant spectral line is attributed to the luminescence of hybrid “quantum well–dot” nanostructures in the form of a dense array of relatively small quantum dots (QDs) with weak electron and hole localization. The second, lower intensity line is attributed to luminescence from a less dense array of comparatively larger QDs. Analysis of the behavior of the spectral line intensities at various temperatures showed that the density of larger QDs grows with increasing thickness of the InGaAs layer.

36 MATERIALS SCIENCE↗

Frequency-domain modeling of floating wind arrays with shared mooring lines

A frequency-domain model for floating wind turbine dynamics has been extended to model floating wind farms with couplings from shared mooring systems. The model, called RAFT, could previously calculate the mean offsets and wave-induced response spectra for single floating wind turbines. Now, the model supports multiple floating wind turbines, each with their own properties and responses, along with mooring lines that run directly between floating wind turbines in the array, meaning that shared mooring lines or fully suspended dynamic power cables can be included. This capability is achieved by setting up an array-level solution of the system mean offsets and assembling the full system matrices for solving the dynamic response. The quasi-static mooring model MoorPy is used to linearize the mooring system properties. To compute the floating wind turbine relative motions, phase offsets are applied to each turbine's response as a function of wave frequency based on the wavelength and relative positions in the array. These differential motions are then applied to mooring system tension Jacobians to compute the tension loads in the shared mooring lines. Overall, the capability provides a frequency-domain analog to the modeling capabilities of the floating support structure in FAST.Farm. Mean offsets and power spectral density plots of responses are compared between RAFT and FAST.Farm to verify the implementation. The results indicate good agreement within the expectations of a frequency-domain modeling approach and suggest correct implementation of the shared mooring aspects. Additionally, a unique comb-like frequency response in the shared mooring line tensions has been observed. This phenomenon has a clear physical basis and may be an important design consideration for future shared mooring systems.

17 WIND ENERGY↗

EVIDENCE OF SIGNIFICANT ENERGY INPUT IN THE LATE PHASE OF A SOLAR FLARE FROM NuSTAR X-RAY OBSERVATIONS

We present observations of the occulted active region AR 12222 during the third Nuclear Spectroscopic Telescope ARray ( NuSTAR ) solar campaign on 2014 December 11, with concurrent Solar Dynamics Observatory ( SDO )/AIA and FOXSI-2 sounding rocket observations. The active region produced a medium-size solar flare 1 day before the observations, at ∼18 UT on 2014 December 10, with the post-flare loops still visible at the time of NuSTAR observations. The time evolution of the source emission in the SDO/ AIA 335 Å channel reveals the characteristics of an extreme-ultraviolet late-phase event, caused by the continuous formation of new post-flare loops that arch higher and higher in the solar corona. The spectral fitting of NuSTAR observations yields an isothermal source, with temperature 3.8–4.6 MK, emission measure (0.3–1.8) × 10{sup 46} cm{sup −3}, and density estimated at (2.5–6.0) × 10{sup 8} cm{sup −3}. The observed AIA fluxes are consistent with the derived NuSTAR temperature range, favoring temperature values in the range of 4.0–4.3 MK. By examining the post-flare loops’ cooling times and energy content, we estimate that at least 12 sets of post-flare loops were formed and subsequently cooled between the onset of the flare and NuSTAR observations, with their total thermal energy content an order of magnitude larger than the energy content at flare peak time. This indicates that the standard approach of using only the flare peak time to derive the total thermal energy content of a flare can lead to a large underestimation of its value.

79 ASTRONOMY AND ASTROPHYSICS↗

Gel-like properties of MCM-41 material and its transformation to MCM-50 in a caustic alkaline surround

Highlights: Black-Right-Pointing-Pointer MCM-41 material transforms gradually into MCM-50 lamellar gel upon controlled exposure to 6 M KOH. Black-Right-Pointing-Pointer The formation of MCM-50 ordered gel structure occurs at KOH weight content of 40-70 wt. %. Black-Right-Pointing-Pointer MCM gel phase shows pseudoplastic behavior and possesses homogeneous matrix texture. -- Abstract: MCM-41 material, prepared by sol-gel method, reveals gel-like properties in a caustic alkaline environment, i.e., 6 M potassium hydroxide (KOH) electrolyte. The gellation of MCM-41 starts at a KOH weight ratio of 40 wt.%. The structural change of the material is verified with X-Ray diffractograms and supported by observation using Scanning Electron Microscope (SEM). As the KOH weight ratio increases, the MCM-41 hexagonal arrays structure gradually transforms into MCM-50 lamellar structure before disappearing completely at 80 wt.% KOH. The MCM gel phase is further characterized by rotational viscometry and texture analysis. The gel phase shows shear thinning or pseudoplastic behavior and possesses homogeneous matrix structure.

36 MATERIALS SCIENCE↗

Fabrication of a 238Pu target

Precision neutron-induced reaction data are important for modeling the network of isotope production and destruction within a given diagnostic chain. This network modeling has many applications such as the design of advanced fuel cycle for reactors and the interpretation of radiochemical data related to the stockpile stewardship and nuclear forensics projects. Our current funded effort is to improve the neutron-induced reaction data on the short-lived actinides and the specific goal is to improve the neutron capture data on {sup 238}Pu with a half-life of 87.7 years. In this report, the fabrication of a {sup 238}Pu target for the proposed measurement using the DANCE array at LANL is described. The {sup 238}Pu target was fabricated from a sample enriched to 99.35%, acquired from ORNL. A total of 395 {micro}g was electroplated onto both sides of a 3 {micro}m thick Ti foil using a custom-made plating cell, shown in Fig 1. The target-material loaded Ti foil is sandwiched between two double-side aluminized mylar foils with a thickness of 1.4 {micro}m. The mylar foil is glued to a polyimide ring. This arrangement is shown partially in Fig. 2. The assembled target is then inserted into an aluminum container with a wall thickness of 0.76 mm, shown in Fig. 3. A derlin ring is used to keep the target assembly in place. The ends of this cylindrical container are vacuum-sealed by two covers with thin Kapton foils as windows for the beam entrance and exit. Shown in Fig. 4 is details of the arrangement. This target is used for phase I of the proposed measurement on {sup 238}Pu scheduled for Nov 2010 together with the DANCE array to address the safety issues raised by LANL. Shown in Fig. 5 is the preliminary results on the yield spectrum as a function of neutron incident energy with a gate on the total {gamma}-ray energy of equivalent Q value. Since no fission PPAC is employed, the distinction between the capture and fission events cannot be made, which is important for the higher neutron incident energy. However, it indicates that a cross section of less than one barn can be measured. The second phase of this experiment will be carried out in 2011 by assembling a PPAC with the {sup 238}Pu target to extend the measurement to higher neutron incident energies by distinguishing the capture from fission events. The fission cross section becomes dominant for neutron incident energies above 30 keV. This PPAC was developed in FY2010 under the NA22 funding and performed very well for the {sup 239}Pu and {sup 241}Pu measurements. A new {sup 238}Pu target will be fabricated for the phase II measurement using the same electroplating technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanoscale Structural and Chemical Properties of Antipolar Clusters in Sm-Doped BiFeO3 Ferroelectric Epitaxial Thin Films

The local atomic structure and nanoscale chemistry of an antipolar phase in Bi{sub 0.9}Sm{sub 0.1}FeO{sub 3} epitaxial thin films are examined by an array of transmission electron microscopy (TEM) coupled with electron diffraction and electron energy-loss spectroscopy methods. The observations are tied to macroscopic properties of the films, namely, polarization-electric field hysteresis loops, dielectric constant-electric field hysteresis loops, and the dielectric loss. At room temperature, the local Sm deficiency was determined to destabilize the long-range ferroelectric state, resulting in the formation of local antipolar clusters with the appearance of PbZrO{sub 3}-like antiparallel cation displacements, which give rise to 1/4{l_brace}011{r_brace} and 1/4{l_brace}211{r_brace} reflections as well as 1/2{l_brace}321{r_brace}, because of in-phase oxygen octahedral tilts. Aberration-corrected TEM analysis reveals that the antipolar structure is actually a lamellar of highly dense ferroelectric domains with alternating polarizations. With increasing temperature, a phase transition was observed at 150 C, which is attributed to the reduction of the antiparallel displacements, giving way to cell-doubling structural transition.

36 MATERIALS SCIENCE↗

Phonon scattering mechanisms dictating the thermal conductivity of lead zirconate titanate (PbZr 1- x Ti x O 3 ) thin films across the compositional phase diagram

This paper represents a thorough investigation of the thermal conductivity (κ) in both thin film and bulk PbZr 1–x Ti x O 3 (PZT) across the compositional phase diagram. Given the technological importance of PZT as a superb piezoelectric and ferroelectric material in devices and systems impacting a wide array of industries, this research serves to fill the gap in knowledge regarding the thermal properties. The thermal conductivities of both thin film and bulk PZT are found to vary by a considerable margin as a function of composition x. Additionally, we observe a discontinuity in κ in the vicinity of the morphotropic phase boundary (MPB, x = 0.48) where there is a 20%–25% decrease in κ in our thin film data, similar to that found in literature data for bulk PZT. The comparison between bulk and thin film materials highlights the sensitivity of κ to size effects such as film thickness and grain size even in disordered alloy/solid-solution materials. A model for the thermal conductivity of PZT as a function of composition (κ(x)) is presented, which enables the application of the virtual crystal approximation for alloy-type material systems with very different crystals structures, resulting in differing temperature trends for κ. We show that in the case of crystalline solid-solutions where the thermal conductivity of one of the parent materials exhibits glass-like temperature trends the compositional dependence of thermal conductivity is relatively constant for most values of x. Finally, this is in stark contrast with the typical trends of thermal conductivity with x in alloys, where the thermal conductivity increases dramatically as the composition of the alloy or solid-solution approaches that of a pure parent materials (i.e., as x = 0 or 1).

36 MATERIALS SCIENCE↗

An Analysis of Published DAS Studies for Application to SPE Phase III

Distributed Acoustic Sensing (DAS) is an emerging technology capable of recording the acoustic wavefield at unprecedented spatial resolution. However, this new tool requires significant refinements before it becomes operational for explosion monitoring objectives. Recent studies have shown significant development of array processing with DAS data. In this report we explore three such array processing methods including DAS strain-rate data versus geophone measured ground motion, beamforming for event parameters, and machine learning based denoising. Prior to applying these algorithms to the Source Physics Experiment Phase II and Phase III data, we validate these methods through replication analysis.

47 OTHER INSTRUMENTATION↗