Search NASA⌕ Search

SEARCH · Search NASA

Results for “Physical Security Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Failure Mode Classification for Life Prediction Modeling of Solid-State Lighting

Since the passing of the Energy Independence and Security Act of 2007, the U.S. government has mandated greater energy independence which has acted as a catalyst for accelerating and facilitating research efforts toward the development and deployment of market-driven solutions for energy-saving homes, buildings and manufacturing, as well as sustainable transportation and renewable electricity generation. As part of this effort, an emphasis toward advancing solid-state lighting technology through research, development, demonstration, and commercial applications is assisting in the phase out of the common incandescent light bulb, as well as developing a more economical lighting source that is less toxic than compact fluorescent lighting. This has led lighting manufacturers to pursue SSL technologies for a wide range of consumer lighting applications. An SSL luminaire’s lifetime can be characterized in terms of lumen maintenance life. Lumen maintenance or lumen depreciation is the percentage decrease in the relative luminous flux from that of the original, pristine luminous flux value. Lumen maintenance life is the estimated operating time, in hours, when the desired failure threshold is projected to be reached at normal operating conditions. One accepted failure threshold of SSL luminaires is lumen maintenance of 70% -- a 30% reduction in the light output of the luminaire. Currently, the only approved lighting standard that puts forth a recommendation for long-term luminous flux maintenance projections towards a specified failure threshold of an SSL luminaire is the IES TM-28-14 (TM28) standard. iii TM28 was derived as a means to compare luminaires that have been tested at different facilities, research labs or companies. TM28 recommends the use of the Arrhenius equation to determine SSL device specific reaction rates from thermally driven failure mechanisms used to characterize a single failure mode – the relative change in the luminous flux output or “light power” of the SSL luminaire. The use of the Arrhenius equation necessitates two different temperature conditions, 25°C and 45°C are suggested by TM28, to determine the SSL lamp specific activation energy. One principal issue with TM28 is the lack of additional stresses or parameters needed to characterize non-temperature dependent failure mechanisms. Another principal issue with TM28 is the assumption that lumen maintenance or lumen depreciation gives an adequate comparison between SSL luminaires. Additionally, TM28 has no process for the determination of acceleration factors or lifetime estimations. Currently, a literature gap exists for established accelerated test methods for SSL devices to assess quality, reliability and durability before being introduced into the marketplace. Furthermore, there is a need for Physics-of-Failure based approaches to understand the processes and mechanisms that induce failure for the assessment of SSL reliability in order to develop generalized acceleration factors that better represent SSL product lifetime. This and the deficiencies in TM28 validate the need behind the development of acceleration techniques to quantify SSL reliability under a variety of environmental conditions. The ability to assess damage accrual and investigate reliability of SSL components and systems is essential to understanding the life time of the SSL device itself. The methodologies developed in this work increases the understanding of SSL devices iv through the investigation of component and device reliability under a variety of accelerated test conditions. The approaches for suitable lifetime predictions through the development of novel generalized acceleration factors, as well as a prognostics and health management framework, will greatly reduce the time and effort needed to produce SSL acceleration factors for the development of lifetime predictions.

Sakalaukus, Peter Joseph↗

Roadrunner Supercomputer Breaks the Petaflop Barrier

At 3:30 a.m. on May 26, 2008, Memorial Day, the "Roadrunner" supercomputer exceeded a sustained speed of 1 petaflop/s, or 1 million billion calculations per second. The sustained performance makes Roadrunner more than twice as fast as the current number 1 system on the TOP500 list. The best sustained performance to date is 74.5% efficiency, 1.026 petaflop/s. "Petaflop/s" is computer jargon—peta signifying the number 1 followed by 15 zeros (sometimes called a quadrillion) and flop/s meaning "double-precision floating point operations per second." Los Alamos held the fastest supercomputer title in 1993 with the Thinking Machines CM-5, and inaugurated the supercomputer era, assisting in the development of the Cray-1 in 1976. The Laboratory and IBM go all the way back to the first card-programmable calculators, used at Los Alamos in 1949. Los Alamos also housed serial number 1 of the IBM 704 in 1956. The Roadrunner supercomputer, developed by IBM in partnership with the Laboratory and the National Nuclear Security Administration, uses commercially available hardware, including aspects of commercial game console and graphics technologies. Because of its off-the-shelf components, the computer costs significantly less than a one-of-a-kind machine. It also uses a Linux operating system. The secret to its record-breaking performance is a unique hybrid design. Each compute node in this cluster consists of two AMD OpteronTM dual-core processors plus four PowerXCell 8iTM processors used as computational accelerators. The accelerators used in Roadrunner are a special IBM-developed variant of the Cell processor used in the Sony PlayStation® 3. The node-attached Cell accelerators are what make Roadrunner different than typical clusters. The Lab and IBM have been working on Roadrunner since 2006, but collaboration on Cell dates back to 2002. The first phase of the project included delivery of an initial Opteron-only cluster that operates at a speed of 71 teraflop/s. This initial system has been in full production at Los Alamos for almost a year, and Laboratory researchers are using this machine for classified weapons applications. The full-scale Roadrunner machine operates more than 10 times faster than the current installed system. Phase 2 of the Roadrunner project was completed in October 2007. Two external assessments, one by NNSA headquarters and one by an independent team of high performance computing experts, evaluated the machine's potential use for Laboratory applications, the Laboratory's ability to successfully manage the computing system, IBM's ability to deliver the product, and whether computer programs could be adapted to the new system. Based on the positive outcome of the assessments, the Laboratory and NNSA decided to pursue the final phase of the Roadrunner project. The powerful cluster of nodes will process information enabling the Laboratory to use Roadrunner for advanced physics and predictive simulations of complex scientific processes. Weapons science applications that can be processed by Roadrunner are applicable to all three of the U.S. Department of Energy weapons laboratories. The machine will also be well equipped to tackle the intricacies of modeling processes, ranging from the biomolecular to the cosmological. In addition, Los Alamos intends to purchase additional Roadrunner resources to support open science and technology applications. The full-scale Roadrunner system, named in honor of New Mexico's speedy state bird, broke the performance record at IBM's Poughkeepsie, New York, facility. The full machine will be moved to Los Alamos beginning in July and housed in the Nicholas Metropolis Center for Modeling and Simulation. The first computing applications are expected to begin running on the machine in January 2009. The cost of all phases of the Roadrunner project is approximately $120 million. More than 200 Laboratory employees have been involved in this effort. For more information about Roadrunner at Los Alamos National Laboratory, see the Roadrunner website at http://www.lanl.gov/roadrunner.

CELL BASED PROCESSOR↗

Modeling and Detection of Future Cyber-Enabled DSM Data Attacks

Demand-Side Management (DSM) is an essential tool to ensure power system reliability and stability. In future smart grids, certain portions of a customer’s load usage could be under the automatic control of a cyber-enabled DSM program, which selectively schedules loads as a function of electricity prices to improve power balance and grid stability. In this scenario, the security of DSM cyberinfrastructure will be critical as advanced metering infrastructure and communication systems are susceptible to cyber-attacks. Such attacks, in the form of false data injections, can manipulate customer load profiles and cause metering chaos and energy losses in the grid. The feedback mechanism between load management on the consumer side and dynamic price schemes employed by independent system operators can further exacerbate attacks. To study how this feedback mechanism may worsen attacks in future cyber-enabled DSM programs, we propose a novel mathematical framework for (i) modeling the nonlinear relationship between load management and real-time pricing, (ii) simulating residential load data and prices, (iii) creating cyber-attacks, and (iv) detecting said attacks. In this framework, we first develop time-series forecasts to model load demand and use them as inputs to an elasticity model for the price-demand relationship in the DSM loop. This work then investigates the behavior of such a feedback loop under intentional cyber-attacks. We simulate and examine load-price data under different DSM-participation levels with three types of random additive attacks: ramp, sudden, and point attacks. We conduct two investigations for the detection of DSM attacks. The first studies a supervised learning approach, with various classification models, and the second studies the performance of parametric and nonparametric change point detectors. Results conclude that higher amounts of DSM participation can exacerbate ramp and sudden attacks leading to better detection of such attacks, especially with supervised learning classifiers. We also find that nonparametric detection outperforms parametric for smaller user pools, and random point attacks are the hardest to detect with any method.

97 MATHEMATICS AND COMPUTING↗

Enabling Model Organism and Commercial Astronaut Data Access Through the NASA Open Science Data Repository

NASA’s Open Science Data Repository (OSDR) brings together omics data from NASA’s GeneLab project and non-omics data, including physiological, phenotypic, imaging, and behavioral data from NASA’s Ames Life Sciences Data Archive (ALSDA) collected from decades of space biology research, providing open and FAIR (findable, accessible, interoperable, and reusable) access of these precious data to scientists world-wide. This rich source of meticulously curated metadata and data from spaceflight and analog studies has been mined by the scientific community resulting in dozens of high impact scientific publications that reveals a complex network of molecular and physiological effects of spaceflight across living systems, from microbes to plants, to mammals. Understanding how these effects translate to the human condition is critical as we move deeper into the era of commercial space travel. However, the integration of data, specifically omics data, from astronauts is particularly challenging due to their sensitive nature. OSDR has risen to this challenge by developing a mechanism to control access to identifiable levels of omics data, such as raw sequence data, while enabling public access to processed, unidentifiable, data and associated metadata that will allow the scientific community to interrogate human astronaut data alongside data from model organisms to begin answering these critical questions. The 2021 SpaceX Inspiration4 (I4) mission collected a comprehensive atlas of biological measurements from four civilian astronauts, providing a wealth of data to characterize the effects of spaceflight on the human body. These data include both non-omics and omics assays such as direct RNA sequencing (RNA-seq), single nuclei ATAC-seq and RNA-seq, metagenomics, proteomics, and comprehensive metabolic and cytokine panels, all of which have been integrated into the OSDR system across no less than 9 studies. Each study has been carefully curated using community-backed OSDR standards for sample and assay level metadata ensuring these data are findable and accessible. In addition to hosting both raw and processed data from the principal investigator team for each assay type, the GeneLab team plans to re-process the I4 omics data using GeneLab’s standard processing pipelines. The GeneLab processed data outputs will allow for comparisons across studies on OSDR and enable visualization of these data through the OSDR data visualization platform thereby enabling data reusability and interoperability. Here we describe the robust privacy and security protocols implemented by OSDR to safeguard sensitive health data from astronauts while facilitating metadata and processed data sharing for research purposes. We further provide a road map for navigating the vast amount of data provided for each I4 study on the OSDR, including experimental design, associated experiments, payloads, and missions, data generation and analysis protocols, and associated scientific articles. Additionally, we illustrate how to interrogate the standardized metadata provided in the sample and assay tables as well as various means to download and access the data including programmatically through the GeneLab Open API (GLOpenAPI). The open access of datasets in NASA’s OSDR provides a unique opportunity for the scientific community, as well as citizen scientists and students, to continue using OSDR resources to further unlock profound insights into the consequences of space travel on the human body. Through implementation of security measures to protect sensitive human data, the OSDR seeks to strengthen the science exchange between the Biological and Physical Sciences Program and the Human Research Program, per recommendation 4-1 of the 2023-2032 Decadal Survey, and encourage further sharing and dissemination of astronaut data to provide the scientific community with the resources needed to lay the groundwork for developing targeted mitigation strategies to help withstand the rigors of long-duration spaceflight.

Amanda Marie Saravia-butler↗

How The Inner Disk Communicates to the Outer Disk

We investigated how evolution in the outer disk has an influence on the inner disk of a protoplanetary disk system. Thanks to two-layer models that give the theoretical platform of disk geometry, we now have a good handle on how dust evolves in outer protoplanetary disks (>10 AU). It has long been thought that the outer and inner disks dissipate on roughly the same time scale as sub-mm observations of nearby T Tauri systems has suggested. However, new high spatial resolution observations point toward the dissipation of an inner disk as not being a simple extension of the outer disk. We performed preliminary tests of the differential disk evolution in gas and dust in the inner disks of Herbig Ae/Be stars using the CO vibrational band as the gas probe. The line luminosity of CO v = 1-0 P(30) has a reasonable correlation with the near-infrared excess over the stellar photosphere. It guarantees that the CO vibration band is a secure probe of the inner disk, as is expected from its high critical density, high excitation temperature, and kinematics. On the other hand, the line luminosity of P(30) does not show a clear trend either with far-infrared color, near-infrared/far-infrared-color, or the type of the spectral energy distribution (SED)(I/II). The inner disks (<1 AU) of Herbig Ae/Be stars of our sample are influenced little by the geometry of the outer disks.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DISTRIBUTION OF DARK MATTER OVER THREE DECADES IN RADIUS IN THE LENSING CLUSTER ABELL 611

We present a detailed analysis of the baryonic and dark matter distribution in the lensing cluster Abell 611 (z = 0.288), with the goal of determining the dark matter profile over an unprecedented range of cluster-centric distance. By combining three complementary probes of the mass distribution, weak lensing from multi-color Subaru imaging, strong lensing constraints based on the identification of multiply imaged sources in Hubble Space Telescope images, and resolved stellar velocity dispersion measures for the brightest cluster galaxy secured using the Keck telescope, we extend the methodology for separating the dark and baryonic mass components introduced by Sand et al. Our resulting dark matter profile samples the cluster from approx3 kpc to 3.25 Mpc, thereby providing an excellent basis for comparisons with recent numerical models. We demonstrate that only by combining our three observational techniques can degeneracies in constraining the form of the dark matter profile be broken on scales crucial for detailed comparisons with numerical simulations. Our analysis reveals that a simple Navarro-Frenk-White (NFW) profile is an unacceptable fit to our data. We confirm earlier claims based on less extensive analyses of other clusters that the inner profile of the dark matter profile deviates significantly from the NFW form and find a inner logarithmic slope beta flatter than 0.3 (68%; where rho{sub DM} propor to r{sup -b}eta at small radii). In order to reconcile our data with cluster formation in a LAMBDACDM cosmology, we speculate that it may be necessary to revise our understanding of the nature of baryon-dark matter interactions in cluster cores. Comprehensive weak and strong lensing data, when coupled with kinematic information on the brightest cluster galaxy, can readily be applied to a larger sample of clusters to test the universality of these results.

79 ASTRONOMY AND ASTROPHYSICS↗

HIGH-DISPERSION SPECTRUM OF THE HALO PLANETARY NEBULA DdDm 1

Using the High Dispersion Spectrograph (HDS) at the Subaru Telescope, we secured the high-resolution line spectra in the 3600-7500 A wavelength range of the Galactic halo planetary nebula DdDm 1. We also analyzed the Hubble Space Telescope Faint Object Spectrograph data in the 1200-6730 A wavelength range. The diagnostic results indicate the electron temperatures of T {sub e}psilonapprox 11,000-14,000 K and the electron number densities of N {sub e}psilonapprox 2000-10,500 cm{sup -3}. In spite of high gaseous temperatures, we have not detected high excitation lines, e.g., He II. We derived abundance based on the ionic concentration of permitted and forbidden lines and the photoionization model. A comparison of the ionic concentrations from forbidden lines to recombination lines shows the abundance discrepancy between them. We tested various possibilities, e.g., temperature fluctuation and high-density blob components, to explain the discrepancy. The high-density components or density fluctuation might be partly responsible for the discrepancy. DdDm 1 shows a low carbon abundance that corresponds to metal-poor stars, [Fe/H] <=-1. Assuming a distance of 10 kpc to DdDm 1, theoretical models suggest that the central star has T {sub eff}approx = 39,000 K and Lapprox = 2000-3000 L {sub sun}. The relatively high gas temperatures appear to be caused by very low heavy elemental abundances or insufficient coolants in the shell gas. Its progenitor, born in an extremely carbon-poor environment as an initial mass of about 0.9 M {sub sun}, had probably experienced only the first dredge-up.

79 ASTRONOMY AND ASTROPHYSICS↗

GRiP - A flexible approach for calculating risk as a function of consequence, vulnerability, and threat.

Get a GRiP (Gravitational Risk Procedure) on risk by using an approach inspired by the physics of gravitational forces between body masses! In April 2010, U.S. Department of Homeland Security Special Events staff (Protective Security Advisors [PSAs]) expressed concern about how to calculate risk given measures of consequence, vulnerability, and threat. The PSAs believed that it is not 'right' to assign zero risk, as a multiplicative formula would imply, to cases in which the threat is reported to be extremely small, and perhaps could even be assigned a value of zero, but for which consequences and vulnerability are potentially high. They needed a different way to aggregate the components into an overall measure of risk. To address these concerns, GRiP was proposed and developed. The inspiration for GRiP is Sir Isaac Newton's Universal Law of Gravitation: the attractive force between two bodies is directly proportional to the product of their masses and inversely proportional to the squares of the distance between them. The total force on one body is the sum of the forces from 'other bodies' that influence that body. In the case of risk, the 'other bodies' are the components of risk (R): consequence, vulnerability, and threat (which we denote as C, V, and T, respectively). GRiP treats risk as if it were a body within a cube. Each vertex (corner) of the cube represents one of the eight combinations of minimum and maximum 'values' for consequence, vulnerability, and threat. The risk at each of the vertices is a variable that can be set. Naturally, maximum risk occurs when consequence, vulnerability, and threat are at their maximum values; minimum risk occurs when they are at their minimum values. Analogous to gravitational forces among body masses, the GRiP formula for risk states that the risk at any interior point of the box depends on the squares of the distances from that point to each of the eight vertices. The risk value at an interior (movable) point will be dominated by the value of one vertex as that point moves closer and closer to that one vertex. GRiP is a visualization tool that helps analysts better understand risk and its relationship to consequence, vulnerability, and threat. Estimates of consequence, vulnerability, and threat are external to GRiP; however, the GRiP approach can be linked to models or data that provide estimates of consequence, vulnerability, and threat. For example, the Enhanced Critical Infrastructure Program/Infrastructure Survey Tool produces a vulnerability index (scaled from 0 to 100) that can be used for the vulnerability component of GRiP. We recognize that the values used for risk components can be point estimates and that, in fact, there is uncertainty regarding the exact values of C, V, and T. When we use T = t{sub o} (where t{sub o} is a value of threat in its range), we mean that threat is believed to be in an interval around t{sub o}. Hence, a value of t{sub o} = 0 indicates a 'best estimate' that the threat level is equal to zero, but still allows that it is not impossible for the threat to occur. When t{sub o} = 0 but is potentially small and not exactly zero, there will be little impact on the overall risk value as long as the C and V components are not large. However, when C and/or V have large values, there can be large differences in risk given t{sub o} = 0, and t{sub o} = epsilon (where epsilon is small but greater than a value of zero). We believe this scenario explains the PSA's intuition that risk is not equal to zero when t{sub o} = 0 and C and/or V have large values. (They may also be thinking that if C has an extremely large value, it is unlikely that T is equal to 0; in the terrorist context, T would likely be dependent on C when C is extremely large.) The PSAs are implicitly recognizing the potential that t{sub o} = epsilon. One way to take this possible scenario into account is to replace point estimates for risk with interval values that reflect the uncertainty in the risk components. In fact, one could argue that T never equals zero for a man-made hazard. This paper describes the thought process that led to the GRiP approach and the mathematical formula for GRiP and presents a few examples that will provide insights about how to use GRiP and interpret its results.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Estimation of the time for steam generator trip due to cyber intrusions

The time required to trip a pressurized water reactor (PWR) by inserting malicious signals into its steam generator (SG) control system has been studied using the Generic PWR (GPWR) Simulator. A semi-analytical model is developed to approximately reproduce the simulator response and understand the dynamics of the control unit. A series of two proportional-integral controllers determines control action according to preset constants, the readings from the feedwater level sensor, and those from feedwater and steam flowrate transmitters. It is observed that the most important factor that determines whether a trip will occur is how much additional water is added to or withheld from the SG over time compared to normal operating conditions. In order to determine the effects of control action on the SG, changes in mass inventory are considered. This approach models the SG water level as a function of mass inventory and has a backward temporal memory. A Python interface is developed for the GPWR framework to automatically simulate different spoofing scenarios and post-process the related data. We observe that the trip times predominantly depend on flow mismatch and/or level errors. Controller parameters, including the integral time and gain constants, either speed up or slow down the rate of progression to a trip setpoint but do not cause a trip by themselves. The reactor can trip on a high-level signal when the reading crosses above 78%, increased from its reference level of 57%, or a low-level reading when it is below 25%. The present results show roughly how long the operators would have to respond to an attack, given a specific set of spoofing signals within the issue space analyzed. Furthermore, we have generated a simple surface by fitting a combination of exponential functions to the data obtained from the GPWR Simulator. In general, trips on a low level have been observed to occur faster than those on a high level.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear Forensics for Irradiated Materials using Kernel Regression Models

The ultimate purpose of nuclear forensics is to locate the origin of nuclear and other radioactive materials out of regulatory control used in nuclear security events such as classical forensics. For this purpose, some specific characteristics of interdicted materials (referred to as 'signatures') should be defined to compare the known sample database. In some cases, involved with irradiated material, the signatures could be specific amount of fission product inventory depending on reactor operational histories such as reactor type, initial enrichment, burn up rate of nuclear fuel and cooling period after irradiation in the reactor. In order to make inference model for irradiated material for nuclear forensics, we suggested 3 ways as follows; (i) analyzing ORIGEN produced nuclear substances for the fission product inventory, (ii) classifying the range of reactor type, (iii) predicting the operational history from the fission product inventory. In terms of nuclear substance analysis, the construction of spent fuel database has been internationally carried out since ITWG (Nuclear Smuggling International Technical Working Group) was established in 1995. However, enough sample data cannot be obtained in Korea to determine reactor type and operational histories because analyzing nuclear substances have been limited due to the international regulation. Thus, this study does not mention how to obtain mass or ratios of nuclides for the spent fuel. We just have generated simulation sample data as a fission product inventory using ORIGEN to construct spent fuel database. When unidentified radioactive materials are discovered, it is assumed that mass or ratios of the nuclides are analyzed by certain methods which are available in Korea as well as other countries. Then, a reactor type is determined, and finally, regression model can locate the origin or source of the radioactive materials by inferring operational histories using the fission product inventory. There are some studies on the classification of reactor type using statistical methods. As a part of predicting the operational history, this paper focuses on the development of spent fuel inference algorithm for nuclear forensics to estimate reactor operational histories that reflect characteristics of a reactor from the fission product inventory. The spent fuel inference algorithm for nuclear forensics has been developed on the basis of Kernel Regression (KR) which can conditionally generate the estimated output data by giving weight depending on geometric distance between sample data and input data. Also the KR which comprises Auto-Associative KR and Inferential KR have some benefits that can estimate only using data without assumption for specific physical model and re-learning process. Auto-associative KR (AAKR) was used to sort out outliers of input data and Inferential KR (IKR) was carried out to predict the operational histories for spent fuel. All of regression algorithms were performed in R programming tool. From the validation of both AAKR and IKR, it is expected that kernel regression has enough accuracy to be applied to nuclear forensics for spent fuel. Once the nuclear substance is measured to fill the fission product inventory with a certain reactor type, this kernel regression algorithm would predict the operational histories of spent fuel with high accuracy. Finally, this information is expected to be useful to find the origin of irradiated materials. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Liquid Piston with Spray Cooling Near-Isothermal Compressor

The goal of this project was to prototype and characterize the performance of a liquid-piston spray-cooled gas compressor. The working principle of the compressor enables optimized high-efficiency operation over a very wide range of operating conditions, unlike conventional compressors that are optimized for a narrow range of operating conditions. The compressor technology is suitable for many applications, such as gas pipeline transport, gas storage, and commercial and residential heat pumps. Both physical testing and computational fluid dynamics (CFD) modeling of the processes using the Oak Ridge National Laboratory high-performance computing center were completed. The experimental and CFD studies focused on a near-isothermal liquid-piston compressor (LPC) that uses propylene glycol to compress CO 2 . The first prototype demonstrated isothermal operation during several sequentially executed cycles of CO 2 compression and raised the temperature of the compressed CO 2 by only 2 K, compared with approximately 6 K when the gas was compressed non-isothermally. Isothermal operation was demonstrated at CO 2 flow rates of up to 2 L/min. The second prototype was designed with two compression chambers to allow continuous flow of high-pressure CO 2 . However, the design of the valve train to direct flow between the compression chambers was not sufficient to allow demonstration of CO 2 compression. Numerical simulations of the LPC in which the compression chamber was filled with propylene glycol injected from the bottom inlet were performed using large eddy simulation (LES) with the wall-adapting local eddy-viscosity subgrid-scale model coupled with the multiphase volume of fluid (VOF) model to simulate the transient interface between gas and liquid and to capture the heat and mass transfers within the compression chamber. In this effort, the effects of boundary conditions applied to the LES-VOF calculations (i.e., no wall, an adiabatic wall, and a wall with a heat flux subscribed) on the overall pressure and temperature of the CO 2 gas as well as the transient evolution of flow and heat transfer within the compression chamber were investigated and are discussed in this report. The LES calculation with no wall showed no dynamical flow patterns, and the volume-averaged temperature of CO 2 increased from 305 to 392.7 K, whereas LES calculations with a constant wall temperature or a wall heat flux had similar increases of CO 2 temperatures. The results of the LES simulation using a wall heat flux showed different stages in the compression process and revealed dynamical formation and interaction of CO 2 gas layers and circulation flow patterns within the chamber that contributed to the overall heat transfer between the solid wall, gas, and liquid surface in the compressor. Though an industrial partnership for commercializing the compressor was not secured, the technology was attractive for an industrial partner to use in two research proposals in response to US Department of Energy funding opportunity announcements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Predicting multiphase flow and tracer transport for an underground chemical explosive test

Detecting radionuclide gas seepage from clandestine underground nuclear tests is central to nonproliferation explosion monitoring research. Yet, early-time (<6 day) gas transport driven by the explosive pressure wave remains poorly constrained due to scarcity of field data. We simulate multi-phase gas transport in the vadose zone using pre-shot data from a recent chemical explosion in P-Tunnel at the Nevada National Security Site, USA. Despite using a simplified 2D-radial model, predictions of tracer arrival matched observations within one order-of-magnitude. Our results show how transient blast forcing rapidly mobilizes gases from the cavity into surrounding rock – critical for optimizing sensor placement and test planning. This unique integration of field data and modeling represents a significant improvement in our ability to predict gas migration from underground explosions. More broadly, it offers insights into the coupled dynamics of pressure waves and contaminant transport in the vadose zone, with implications for monitoring and hazard assessment.

54 ENVIRONMENTAL SCIENCES↗

US Department of Energy, Office of Science High Performance Computing Facility Operational Assessment 2019 Oak Ridge Leadership Computing Facility

Oak Ridge National Laboratory's (ORNL's) Leadership Computing Facility (OLCF) continues to surpass its operational target goals: supporting users; delivering fast, reliable computational ecosystems; creating innovative solutions for high performance computing (HPC) needs; and managing risks, safety, and security associated with operating some of the most powerful computers in the world. The results can be seen in the cutting-edge science conducted by users and the praise from the research community. Calendar year (CY) 2019 was a big year as OLCF staff ran five world-class resources (the leadershipclass computers Titan and Summit, the large analysis cluster called Eos, and the massive parallel filesystems called Atlas and Alpine)) and also began power and cooling upgrades for a 2021 exascale system called Frontier. While continuing exceptional operation of Titan, Eos, and Rhea, the OLCF released the Summit supercomputer for production on January 1, 2019. Summit debuted as the most capable and efficient system in its class and has been recognized as the most powerful system in the world for its performance on both the high performance linpack (HPL) and conjugate gradient (HPCG) benchmark applications since June 2018 according to TOP500. Summit represents the culmination of a multiyear effort between the OLCF, IBM, NVIDIA, and Mellanox to deliver a system that is unmatched for modeling, simulation, data analysis, and learning. To hit the ground running with science-ready applications on day one, application teams worked closely with the OLCF through the Center for Accelerated Application Readiness (CAAR) program for years in advance of the Summit deployment. CY 2019 was filled with outstanding results and accomplishments: a very high rating from users on overall satisfaction for the sixth year in a row; a tremendous amount of core-hours delivered to researchers from two leadership-class systems; and success in delivering on the allocation split of roughly 60%, 30%, and 10% of core-hours offered for the Innovative and Novel Computational Impact on Theory and Experiment (INCITE), Advanced Scientific Computing Research Leadership Computing Challenge (ALCC), and Director's Discretionary (DD) programs, respectively (see Operational Performance section). These accomplishments, coupled with the high utilization rates (overall and capability usage), represent the fulfillment of the promise of both leadership-class machines: efficient facilitation of leadership-class computational applications. Table ES.1 presents a summary of the 2019 OLCF metric targets and the associated results. More information can be found in the Operational Performance section for each OLCF resource. The scientific accomplishments of OLCF users are a strong indication of long-term operational success, with publications this year in such notable journals and publications as Nature, Nature Physics, Nature Plants, Physical Review X, Journal of the American Physical Society, Cell, Nano Letters, and Trends in Biotechnology. Crucial domain-specific discoveries facilitated by resources at the OLCF are described in the High Performance Computing Facility Operational Assessment 2019 Oak Ridge Leadership Computing Facility (OAR) Strategic Results section. For example, researchers used Summit to pinpoint and understand the production of proteins from genetic information, including mutations and the functional expression of disease (Section 8.2).

97 MATHEMATICS AND COMPUTING↗

Godiva IV Simulated Radiation Field Characterization and Variance Reduction

Godiva IV is a system comprised of highly enriched uranium alloyed with molybdenum in the form of fuel plate rings. The reactor, along with its predecessors, was designed with the unique ability to satisfy interests in the super-prompt-critical reactor operation space. Originally, the reactor was part of the Los Alamos Critical Experiments Facility (LACEF) at Technical Area-18 (TA-18). The radiation field around Godiva at this facility was well characterized and understood. As a fast neutron system, the neutron spectrum in and around Godiva was close to a Watt Fission spectrum. The Kiva where Godiva IV was located at LACEF was made of thin, sheet metal walls which did not contribute significantly to the neutron spectrum. Following the transition of LACEF to the National Critical Experiments and Research Center (NCERC) in Nevada, Godiva-IV was moved from TA-18 to the Device Assembly Facility (DAF) at the Nevada National Security Site (NNSS). Part of this move brought renewed interest in radiation field characterization. The new facility introduced significant changes to the environment surrounding Godiva, and preliminary foil irradiation results suggested that the room contribution to the neutron spectrum was significant. Unlike at TA-18, a large thermal neutron signature was added to the fast spectrum from Godiva due to significant room return. A primary goal due to the additional complexity that the room return adds to the Godiva IV radiation emission spectrum was the development of an efficient Monte Carlo N-Particle (MCNP) calculation capable of characterizing the neutron spectrum anywhere in the room around Godiva. A campaign of activation foil irradiations and analysis were completed to support the validation of the MCNP model. The modeling of these foils in MCNP can be easily done with a standard volumetric neutron flux tally. However, given the multitude of locations and reaction rates to be modeled, further steps must be taken to increase the efficiency of these calculations in MCNP. During this study, a benchmark model currently under development for Godiva IV was used. A qualitative assessment of the thermal neutron contributors was performed using spatial neutron distribution plots. Additional detail was added to the model based on the qualitative results showing the thermal spectrum’s large sensitivity to hydrogenous material. Neutron energy spectra was evaluated at discrete locations in the room around Godiva to quantify the relative contribution of various components. It was discovered that the concrete walls are the largest contributor to the thermal signature, with minor contributions from plastic components surrounding Godiva. Following these results, two different variance reduction techniques were implemented to improve the problem efficiency in these calculations. In the first approach, an F5 point detector tally was implemented in the standard Godiva IV criticality problem. The second approach involved a weight-window generator implementation with an F5 point detector tally in a fixed source problem. The weight window implementation reduced the runtime from 42739.55 minutes to 1803.34 minutes (computer time), compared to the F5 KCODE implementation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling and Simulation of Fuel Burnup in Pebble Bed Reactors

Modeling and simulation of fuel burnup plays important roles in reactor design, operation, safety, and security as well as nuclear material control and accounting (MC&A) [1]. This task is uniquely challenging for pebble bed reactors (PBR) because the pebbles are continuously added and recycled into the reactor core, and their paths through the core are random. To address this problem, we present two simulation models in this paper. Brookhaven National Laboratory (BNL) developed a simple lattice model of a PBR in Serpent software to generate used pebble isotopic concentrations. The benefit of using Serpent software in this specific application is that it helps streamline the data generation process without having to use too many independent software codes in combination to achieve a simple task. For example, transport, burnup and zero power decay can be implemented in a single pass. Three-dimensional core models were developed using Serpent to simulate the burnup process of five subject pebbles starting from fresh till they reach nearly target burnup, with each pebble placed in one of the five artificially designated radial channels to capture the changing neutron spectra along the core radius. Equilibrium isotopic concentrations were assumed in all other pebbles in the core. To provide a verification for the Serpent isotope transmutation and decay results, Oak Ridge National Laboratory (ORNL) performed simple SCALE/ORIGEN calculations using the average neutron spectra calculated by Serpent for each of the five pebbles. The 252-group neutron spectra from Serpent were then used by ORIGEN to produce the one-group library for depletion and decay calculations. The isotopic concentrations of a few nuclides of interest and neutron and gamma source terms produced from the ORIGEN calculations were compared with the ones from the Serpent calculations. The model simulated in this work was based on the Pebble Bed Modular Reactor (PBMR)-400 design because many data needed for the simulation such as core power profiles, fuel and reflector temperatures, and equilibrium core composition are publicly available. In this paper, we will compare the results between these two approaches and benchmark the results against a set of well-established simulation results for PBMR-400.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Dual-Doppler Feasibility Study

When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any radar geometry issues at the NWS MLB radar, such as the "cone of silence" or beam blockage. In the event of a radar outage at one of the sites, the multi-radar algorithms would provide continuing coverage of the area through use of the data from the remaining operational radar sites. There are several options to collect, edit, synthesize and display dual-Doppler data sets. These options include commercial packages available for purchase and a variety of freeware packages available from the National Center for Atmospheric Research (NCAR) for processing raw radar data. However, evaluation of the freeware packages revealed that they do not have sufficient documentation and configuration control to be certified for 45 SW use. Additionally, a TI data line must be installed/leased from the NWS MLB office and CCAFS to enable the receipt of NWS MLB raw radar data to use in the dual-Doppler synthesis. Integration of the TI data line into the Eastern Range infrastructure that will meet the security requirements necessary for 45 SW use is time-consuming and costly. Overall evaluation indicates that establishment of the dual-Doppler capability using the existing operational radar systems is desirable and feasible with no technical concerns. Installation of such a system represents a significant enhancement to forecasting capabilities at the 45 WS and at NWS MLB. However, data security and cost considerations must be evaluated in light of current budgetary constraints. In any case, gaining the dual-Doppler capability will provide opportunities for better visualization of the wind field and better forecasting of the onset of convection and severe weather events to support space launch operations at KSC and CCAFS.

Huddleston, Lisa L.↗

Calibration of X-ray imaging devices for accurate intensity measurement

National Security Technologies (NSTec) has developed calibration procedures for X-ray imaging systems using NIST traceable sources. The X-ray sources that are used for calibration are both diode type and diode/fluorescer combinations. Calibrating the X-ray detectors is the key to accurate calibration of the X-ray sources. Both energy dispersive detectors and photodiodes measuring total flux were used. We have developed calibration techniques for the detectors using radioactive sources that are traceable to the National Institute of Standards and Technology (NIST). The German synchrotron at Physikalische Technische Bundestalt (PTB) is used to calibrate silicon photodiodes over the energy range from 50 eV to 60 keV. The measurements on X-ray cameras made using the NSTec X-ray sources have included the quantum efficiency averaged over all pixels, the camera counts per photon per pixel, and response variation across the sensor. The instrumentation required to accomplish the calibrations is described. X-ray energies ranged from 720 eV to 22.7 keV. The X-ray sources produce narrow energy bands, allowing us to determine the properties as a function of X-ray energy. The calibrations were done for several types of imaging devices. There were back illuminated and front illuminated CCD (charge coupled device) sensors, and a CID (charge injection device) type camera. The CCD and CID camera types differ significantly in some of their properties that affect the accuracy of X-ray intensity measurements. All cameras discussed here are silicon based. The measurements of quantum efficiency variation with X-ray energy are compared to models for the sensor structure. Cameras that are not back-thinned are compared to those that are.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Proceedings of the 2009 Monitoring Research Review: Ground-Based Nuclear Explosion Monitoring Technologies

These proceedings contain papers prepared for the Monitoring Research Review 2009: Ground -Based Nuclear Explosion Monitoring Technologies, held 21-23 September, 2009 in Tucson, Arizona,. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, Comprehensive Test Ban Treaty Organization (CTBTO), and other invited sponsors. The scientific objectives of the research are to improve the United States’ capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

58 GEOSCIENCES↗