Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Simulations of a high-density, highly-radiating lithium divertor

Results are presented for one- and two-dimensional (2D) edge plasma transport simulations for strong injection of lithium (Li) in the divertor region of a tokamak. The model includes the scrape-off layer and divertor regions, and, for 2D, a small region inside the magnetic separtrix. Equations are solved for the density and momentum of a deuterium/tritium (DT) species and all three charge states of Li, in addition to separate ion and electron energy equations via the UEDGE code. Equations are also included for the DT and Li gas species. Lithium gas is injected from the side walls or divertor plate, implying that these surfaces are evaporating liquid Li. For a range of Li gas input, steady-state, detached-plasma solutions are shown where greater than 90% of the exhaust power is radiated by Li, resulting in peak surface heat fluxes ~2 MW/m 2 on the divertor plate, outer wall, and private-flux wall. While Li ions dominate in the divertor leg, their density is in the range of 10% of the DT density at the midplane. The collisional parallel thermal force plays a key role in determining the midplane ion Li density, and sensitivity of results to different model assumptions are discussed. Here the key issue is possible dilution of the core DT fuel. A brief comparison of the Li neutral solution is made with that from the Direct Simulation Monte-Carlo (DSMC) SPARTA code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Estimate of radiation release from MIT reactor with un-finned LEU core during Maximum Hypothetical Accident

The Massachusetts Institute of Technology Reactor (MITR-II) is a research reactor in Cambridge, Massachusetts designed primarily for experiments using neutron beam and in-core irradiation facilities. At 6 MW, it delivers neutron flux and energy spectrum comparable to light water reactor (LWR) power reactors in a compact core using highly enriched uranium (HEU) fuel. In the framework of nonproliferation policy, the international community aims to minimize the use of HEU in civilian facilities. Within this context, research and test reactors have started a program to convert HEU fuel to low enriched uranium (LEU) fuel. A new type of LEU fuel based on a high density alloy of uranium and molybdenum (U-10Mo) is expected to allow the conversion of U.S. domestic high performance reactors like MITR. The current study focuses on the impacts of MITR Maximum Hypothetical Accident (MHA), which is also the Design Basis Accident (DBA), with LEU fuel. The MHA for the MITR is postulated to be a coolant flow blockage in the fuel element that contains the hottest fuel plate. It is assumed that the entire active portion of five fuel plates melts. The analysis shows that, within a 2-h period and by considering all the possible radiation sources and dose pathways, the overall off-site dose is 302.1 mrem (1 rem ¼ 0.01 Sv) Total Effective Dose Equivalent (TEDE) at 8 m exclusion area boundary (EAB) and a higher dose of 392.8 mrem TEDE is found at 21 m EAB. In all cases the dose remains below the 500 mrem total TEDE limit goal based on NUREG-1537 guidelines.

Sun, Kaichao (ORCID:0000000285871918)↗

Aerosol Activation in Radiation Fog at the Atmospheric Radiation Program Southern Great Plains Site

Environmental supersaturation is a key parameter in the formation of fog and clouds, yet it cannot be measured directly and must be inferred. Calculating the ambient supersaturation in fog requires knowledge of the aerosol hygroscopicity as well as particle size distribution, and relatively few values have been reported in the literature. Here we use κ-Köhler theory to derive aerosol activation properties based on particle hygroscopicity and dry particle size distributions, and then estimate the effective peak supersaturation during eight cases of radiative fog at the Southern Great Plains site in rural north-central Oklahoma, USA. The mean hygroscopicity parameter κ of particles likely to act as cloud condensation nuclei varied from 0.14 to 0.43. Ambient effective peak supersaturation during the fog episodes was between 0.01%–0.07%, with most values below 0.04%. Furthermore, the minimum 50% dry activation diameter generally ranged between 300–400 nm with little activation of particles with diameters below 300 nm.

54 ENVIRONMENTAL SCIENCES↗

Demonstration of neutron radiation-induced nucleation of supercooled water

In this study, we present direct evidence for neutrons causing nucleation of supercooled water. Highly purified water (20 nm filtration) is cooled to well below freezing (as low as −20 °C) with a radioactive calibration source of neutrons/gamma-rays either present or removed during each of many control cooling runs for the same volume of water. When it is primarily neutrons irradiating the sample bulk, the non-equilibrium freezing point (also known as the “supercooling point”) is, on average, +0.7 °C warmer than the control equivalent, with a statistical significance of greater than 5 Sigma, with systematic uncertainty included. This effect is not observed with water in the presence of gamma-rays instead of neutrons. While these neutrons should have theoretically had sufficient energy to mount the energy barrier, corroborating our results, their raising of supercooling temperature has never been reported experimentally to the best of our knowledge. The potential to use deeply supercooled solutions, not only water, as metastable detectors for radiation and perhaps dark matter or neutrino physics presents now a new avenue for exploration.

Szydagis, Matthew↗

Titanium and germanium lined hohlraums and halfraums as multi-keV x-ray radiators

As multi-keV x-ray radiators, hohlraums and halfraums with inner walls coated with metallic materials (called liner) have been tested for the first time with laser as the energy drive. For titanium, conversion efficiencies (CEs) are up to {approx}14% for emission into 4{pi}, integrating between 4.6 and 6.5 keV when a large diameter hohlraum is used. Germanium CE is {approx}0.8% into 4{pi} between 9 and 13 keV. The highest CEs have been obtained with a 1 ns squared pulse and phase plates giving laser absorption near 99%. These high CEs are due to long-lasting, good plasma conditions for multi-keV x-ray production maintained by plasma confinement inside the plastic cylinder and plasma collision leading to a burst of x rays at a time that depends on target size. As photon emitters at 4.7 keV, titanium-lined hohlraums are the most efficient solid targets and data are close to CEs for gas targets, which are considered as the upper limit for x-ray yields since their low density allows good laser absorption and low kinetics losses. As 10.3 keV x-ray emitters, exploded germanium foils give best results one order of magnitude more efficient than thick targets; doped aerogels and lined hohlraums give similar yields, about three times lower than those from exploded foils.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent progress and tests of radiation resistant impregnation materials for Nb{sub 3}Sn coils

Fermilab is collaborating with Lawrence Berkeley National Laboratory (LBNL) and Brookhaven National Laboratory (BNL) (US-LARP collaboration) to develop a large-aperture Nb{sub 3}Sn superconducting quadrupole for the Large Hadron Collider (LHC) luminosity upgrade. An important component of this work is the development of materials that are sufficiently radiation resistant for use in critical areas of the upgrade. This paper describes recent progress in characterization of materials, including the baseline CTD101K epoxy, cyanate ester blends, and Matrimid 5292, a bismaleimide-based system. Structural properties of “ten stacks” of cable impregnated with these materials are tested at room and cryogenic temperatures and compared to the baseline CT-101K. Experience with potting 1 and 2 meter long coils with Matrimid 5292 are described. Test results of a single 1-m coil impregnated with Matrimid 5292 are reported and compared to similar coils impregnated with the traditional epoxy.

43 PARTICLE ACCELERATORS↗

Interplay of radiative and nonradiative transitions in surface hopping with radiation-molecule interactions

We implemented a method for the treatment of field induced transitions in trajectory surface hopping simulations, in the framework of the local diabatization scheme, especially suited for on-the-fly dynamics. The method is applied to a simple one-dimensional model with an avoided crossing and compared with quantum wavepacket dynamics. The results show the importance of introducing a proper decoherence correction to surface hopping, in order to obtain meaningful results. Also the energy conservation policy of standard surface hopping must be revised: in fact, the quantum wavepacket energetics is well reproduced if energy absorption/emission is allowed for in the hops determined by radiation-molecule coupling. To our knowledge, this is the first time the issues of decoherence and energy conservation have been analyzed in depth to devise a mixed quantum-classical method for dynamics with molecule-field interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On evaluating x-ray imaging crystals with synchrotron radiation

Bent crystals are central to 1-D resolved x-ray spectroscopy and two-dimensional x-ray imaging of plasmas. Nominally identical crystals may differ in their performance with x-rays even though their visible-light images are close to identical. The detailed information needed to understand those differences, viz., the crystal’s local diffraction properties over the area that contributes to the image, is averaged out in the imaging tests that ideally precede the actual crystal’s use. Here the local diffraction of spherically bent crystals made from quartz is examined in the x-ray topography setup at the x-ray optics testing beamline 1-BM at the Advanced Photon Source, with radiation obtained from a flat quartz conditioning crystal made for the purpose.

Pereira, N. R.↗

Limits on dark radiation, early dark energy, and relativistic degrees of freedom

Recent cosmological data analyses hint at the presence of an extra relativistic energy component in the early universe. This component is often parametrized as an excess of the effective neutrino number N{sub eff} over the standard value of 3.046. The excess relativistic energy could be an indication for an extra (sterile) neutrino, but early dark energy and barotropic dark energy also contribute to the relativistic degrees of freedom. We examine the capabilities of current and future data to constrain and discriminate between these explanations, and to detect the early dark energy density associated with them. We find that while early dark energy does not alter the current constraints on N{sub eff}, a dark radiation component, such as that provided by barotropic dark energy models, can substantially change current constraints on N{sub eff}, bringing its value back to agreement with the theoretical prediction. Both dark energy models also have implications for the primordial mass fraction of Helium Y{sub p} and the scalar perturbation index n{sub s}. The ongoing Planck satellite mission will be able to further discriminate between sterile neutrinos and early dark energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of e + e – → γ χ c J via initial state radiation at Belle

The process e + e – → γχ cJ (J = 1, 2) is studied via initial state radiation using 980 fb –1 of data at and around the Υ(nS) (n = 1, 2, 3, 4, 5) resonances collected with the Belle detector at the KEKB asymmetric-energy e + e – collider. Here, no significant signal is observed except from ψ(2S) decays. Upper limits on the cross sections between √s = 3.80 and 5.56 GeV are determined at the 90% credibility level, which range from a few pb to a few tens of pb. We also set upper limits on the decay rate of the vector charmonium [ψ(4040), ψ(4160), and ψ(4415)] and charmoniumlike [Y(4260), Y(4360), and Y(4660)] states to γχ cJ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cross sections for the reactions e + e - → K S 0 K L 0 π 0 , K S 0 K L 0 η , and K S 0 K L 0 π 0 π 0 from events with initial-state radiation

Here, we study the processes e + e - → K$0\atop{S}$ K$0\atop{L}$ π 0 γ , K $0\atop{S}$ K$0\atop{L}$ η γ , and K$0\atop{S}$ K$0\atop{L}$ π 0 π 0 γ , where the photon is radiated from the initial state, providing cross section measurements for the hadronic final states over a continuum of center-of-mass energies. The results are based on 469 fb -1 of data collected at or near the Υ ( 4 S ) resonance with the BABAR detector at SLAC. We present the first measurements of the e + e - → K$0\atop{S}$ K$0\atop{L}$ π 0 , K$0\atop{S}$ K$0\atop{L}$ η , and K$0\atop{S}$ K$0\atop{L}$ π 0 π 0 cross sections up to a center-of-mass energy of 4 GeV and study their intermediate resonance structures. We observe J / ψ decays to all of these final states for the first time, present measurements of their J / ψ branching fractions, and search for ψ (2S) decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗