Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Lightning strikes to a NASA airplane penetrating thunderstorms at low altitudes

The NASA Storm Hazards program was dedicated during the 1984 storm season to a study of lightning strikes on an instrumented F-106B aircraft, during penetrations of thunderstorms at altitudes lower than the 6-8 km center of lightning flash density. These altitudes coincide with the negative charge region of thunderstorms. An analysis of the correlation between the UHF band radar data obtained and TV images of lightning strikes indicates that, with a known aircraft position relative to the radar, the lightning channel motion can be adequately interpreted on the basis of radar echo evolution.

Mazur, V.↗

Thermal-capillary analysis of Czochralski and liquid encapsulated Czochralski crystal growth

Results are presented from finite element analysis of the Czochralski (CZ) and Liquid Encapsulated Czochralski (LEC) crystal growth processes based on a thermal-capillary model which governs the heat transfer in the system simultaneously with setting the shapes of the melt/solid interface, the melt and encapsulant menisci, and the radius of a steadily growing crystal. Calculations are performed for the small-scale growth of silicon (CZ) and gallium arsenide (LEC). The effects of melt volume and crucible position relative to the heater on the radius of the crystal and the shape of the melt/solid interface are predicted for the CZ system, and the importance of including an accurate representation of the melt meniscus for modeling the process is demonstrated. The additional effect of an encapsulant layer on heat transfer is treated for the LEC method for the cases of totally transparent and opaque encapsulant. The responses of these LEC prototype systems are examined for changes in pull rate and encapsulant volume.

Derby, J. J.↗

The dynamics of Herbig-Haro objects

Radial-velocity and proper-motion information on Herbig-Haro (HH) objects is analyzed for clues to the character of the supersonic flows that produce the objects. The correlations among space velocities, excitation states, internal velocity dispersions, electron densities, and positions relative to the exciting stars for the emission knots of HH 1 and HH 2 is examined. Whereas the interstellar-bullet model may account for most of the phenomena in the HH 1-HH 2 system, HH 43 is found to show characteristics of a stellar wind shock against an obstacle cloudlet. By contrast, the HH 46-HH 47 system exhibits a continuous, well-collimated jet of emission with knots that may be due to instabilities in the confined, supersonic flow.

Schwartz, R. D.↗

Optoelectronic Docking System

Sensors and computers control approach and coupling. Proposed optoelectronic system with no moving parts automatically controls approach of two spacecraft as they closed from distance of about 1 km to within few cm. System concept modified for use on Earth in robotic assembly, to control docking of large ships, or to guide placement of large structural components. Optoelectronic docking system automatically controls approach of active vehicle or mechanism to passive vehicle or object. Maneuvers of approaching vehicle controlled in response to optoelectronically sensed relative position of approached vehicle.

Ward, S. M.↗

Predicting Visible Range Of An Object

Report and supplementary materials present method for estimating maximum distance which Spartan free flyer seen by star trackers on Space Shuttle. Brightness, and visible range calculated by using simplified model of object as reflector, taking into consideration orientation of object and predicted relative positions of Shuttle and Sun.

King, Joseph C.↗

Aircraft noise synthesis system

A second-generation Aircraft Noise Synthesis System has been developed to provide test stimuli for studies of community annoyance to aircraft flyover noise. The computer-based system generates realistic, time-varying, audio simulations of aircraft flyover noise at a specified observer location on the ground. The synthesis takes into account the time-varying aircraft position relative to the observer; specified reference spectra consisting of broadband, narrowband, and pure-tone components; directivity patterns; Doppler shift; atmospheric effects; and ground effects. These parameters can be specified and controlled in such a way as to generate stimuli in which certain noise characteristics, such as duration or tonal content, are independently varied, while the remaining characteristics, such as broadband content, are held constant. The system can also generate simulations of the predicted noise characteristics of future aircraft. A description of the synthesis system and a discussion of the algorithms and methods used to generate the simulations are provided. An appendix describing the input data and providing user instructions is also included.

Mccurdy, David A.↗

Aircraft noise synthesis system: Version 4 user instructions

A modified version of the Aircraft Noise Synthesis System with improved directivity and tonal content modeling has been developed. The synthesis system is used to provide test stimuli for studies of community annoyance to aircraft flyover noise. The computer-based system generates realistic, time-varying audio simulations of aircraft flyover noise at a specified observer location on the ground. The synthesis takes into account the time-varying aircraft position relative to the observer; specified reference spectra consisting of broadband, narrowband, and pure tone components; directivity patterns; Doppler shift; atmospheric effects; and ground effects. These parameters can be specified and controlled in such a way as to generate stimuli in which certain noise characteristics such as duration or tonal content are independently varied while the remaining characteristics such as broadband content are held constant. The modified version of the system provides improved modeling of noise directivity patterns and an increased number of pure tone components. User instructions for the modified version of the synthesis system are provided.

Mccurdy, David A.↗

Fiducial reference for the HIPPARCOS reference system

The groundwork was prepared for observations by the Hubble Space Telescope (HST) to tie the coordinate system of the European Astrometry Satellite HIPPARCOS to an extragalactic (VLBI) reference frame, and to determine the rotation of the HIPPARCOS frame with respect to the extragalactic frame. A total of 90 Extragalactic Optical Objects (EGOs) were determined in the vicinity (angular separation less than 18 arcminutes) of 160 HIPPARCOS stars (brighter than about 11.0 magnitude, mostly SAO stars brighter than 10.5), evenly distributed over the sky, to be used to tie the HIPPARCOS system to the Extragalactic Reference Frame. The pairs are to be observed with the HST Fine Guidance Sensors (FGS), sometimes in conjunction with the HST Planetary Camera, in order to determine the relative positions and motions of the individual HIPPARCOS stars with respect to the EGOs. The data base which contains the optical information used to generate the HST Guaranteed Observing Time (GTO) proposal is included.

Duncombe, R. L.↗

Astronomic Telescope Facility: Preliminary systems definition study report. Volume 2: Technical description

The Astrometric Telescope Facility (AFT) is to be an earth-orbiting facility designed specifically to measure the change in relative position of stars. The primary science investigation for the facility will be the search for planets and planetary systems outside the solar system. In addition the facility will support astrophysics investigations dealing with the location or motions of stars. The science objective and facility capabilities for astrophysics investigations are discussed.

Sobeck, Charlie↗

Large scale topography of Io

To investigate the large scale topography of the Jovian satellite Io, both limb observations and stereographic techniques applied to landmarks are used. The raw data for this study consists of Voyager 1 images of Io, 800x800 arrays of picture elements each of which can take on 256 possible brightness values. In analyzing this data it was necessary to identify and locate landmarks and limb points on the raw images, remove the image distortions caused by the camera electronics and translate the corrected locations into positions relative to a reference geoid. Minimizing the uncertainty in the corrected locations is crucial to the success of this project. In the highest resolution frames, an error of a tenth of a pixel in image space location can lead to a 300 m error in true location. In the lowest resolution frames, the same error can lead to an uncertainty of several km.

Gaskell, R. W.↗

An experimental investigation of parasitic microstrip arrays

The characteristics of a parasitic microstrip antenna array with a center-fed patch are experimentally investigated. The parasitic array is composed of identical parasitic patches which are symmetrically arranged and electromagnetically coupled to a center-fed patch. The shape and dimensions of the parasitic patches and their positions relative to the center-fed patch are parameters in the study. To show mutual coupling effects between radiating and nonradiating edges of adjacent patches, the impedance and radiation characteristics of a three-element parasitic array excited with (0.1) mode are examined, and compared to that of a single patch. Experimental data indicate that the presence of parasitic patches has significant effects upon the gain, resonant frequency, and impedance bandwidth of the array.

Lee, Richard Q.↗

Drag measurements of blunt stores tangentially mounted on a flat plate at supersonic speeds

An investigation has been conducted in the Langley Unitary Plan Wind Tunnel to measure the drag of blunt stores (hemispherical noses and afterbodies) tangentially mounted in various arrays on a flat plate at nominal Mach numbers of 1.60, 1.90, 2.16,and 2.86 and at a nominal Reynolds number of 2X10 to the 6th power per foot. The arrays consisted of two and three stores mounted in lateral, tandem, or staggered arrangements. The relative position of the stores in the arrays was varied while the drag of only one store was measured to determine the effect of spacing on the store drag. Store-on-store interference was determined by comparing the drag of a single store with the drag of the store in an array. The results indicate virtually all arrangements and spacings which were tested had favorable store-on-store interference (drag reduction) across the Mach number range. Tabulated data, schlieren photographs, and shadowgraphs are included.

Wilcox, Floyd J., Jr.↗

The quadrupole gravitational lens

An asymmetric lens made of a spherically symmetric galaxy and a quadrupole tidal part allows a very simple pictorial examination of the multiplicity and positions of the images, for any mass density profile. The lens equations can be reduced to one equation in one variable. In the special case of a singular isothermal sphere with a tide (SIST), the lens properties are described by five parameters. Two parameters determine the angular scale and orientation, while three determine the configuration of the images. A comprehensive investigation of the SIST lens is performed, including the variation of the configurations with the parameter values, the critical surfaces in the parameter space, and the extremal solutions. Analytic expressions are derived for the SIST parameters, and additional image positions, in the case when the intensity ratio and positions relative to the galaxy for two of the images are given as input. Quadrupole lenses with a point mass and a pseudoisothermal sphere as the main part are also described in terms of direction diagrams. A direct relation between deflection profile and rotational velocity is derived.

Kovner, Israel↗

GPS-based geodesy in California, Mexico and the Caribbean

The NASA GPS-based geophysical geodetics system will be capable of 1-3 cm relative position accuracies on regional baselines and GPS ephemerides with submeter accuracies. Simultaneity and mutual visibility allow high differential carrier phase and group delay measurements to be obtained without clock errors. Both mobile GPS terminal sites and fiducial sites whose locations are accurately maintained by independent VLBI and SLR systems are to be used. A system validation and multiyear measurement program is under way.

Melbourne, W. G.↗

Radio studies of large scale structures of the Sun's corona and transient activity

The use of meter-decimeter wavelength imaging observations for four different kinds of studies of solar coronal activity is discussed. (1) Large scale structure of the upper corona; daily imaging observations permit comparison of radio images with white light images from space and ground observation, generation of synoptic charts similar to white light coronagraph synoptic charts, and comparison of radio brightness enhancements and deficiencies with bright coronal streamers and coronal holes. (2) Relative positions of type III burst sources and coronal streamers as observed by Solwind experiment on the P-78-1 satellite and by the HAO C/P experiment aboard the SMM; infer the paths of type III emitting electrons in dense coronal streamers, and from multifrequency observations derive electron density distributions above active regions near the limb. (3) Non-flare associated type II/type IV bursts associated with coronal streamer disruption events; such type IV sources have a rather slow velocity (approx = to or less than 100 km/s) CMEs. (4) Meter-decimeter microbursts; these are short duration (2-10 sec) weak-type III-like bursts, produced at the fundamental plasma frequency by plasma radiation processes which have important differences from the standard mechanisms used to explain the strong type III bursts.

Kundu, Mukul R.↗

A linear quadratic Gaussian with loop transfer recovery proximity operations autopilot for spacecraft

An automatic control scheme for spacecraft proximity operations is presented. The controller is capable of holding the vehicle at a prescribed location relative to a target, or maneuvering it to a different relative position using straight line-of-sight translations. The autopilot uses a feedforward loop to initiate and terminate maneuvers, and for operations at nonequilibrium set-points. A multivariate feedback loop facilitates precise position and velocity control in the presence of sensor noise. The feedback loop is formulated using the Linear Quadratic Gaussian (LQG) with Loop Transfer Recovery (LTR) design procedure. Linear models of spacecraft dynamics, adapted from Clohessey-Wiltshire Equations, are augmented and loop shaping techniques are applied to design a target feedback loop. The loop transfer recovery procedure is used to recover the frequency domain properties of the target feedback loop. The resulting compensator is integrated into an autopilot which is tested in a high fidelity Space Shuttle Simulator. The autopilot performance is evaluated for a variety of proximity operations tasks envisioned for future Shuttle flights.

Chen, George T.↗

Lift distribution and velocity field measurements for a three-dimensional, steady blade/vortex interaction

A wind tunnel experiment simulating a steady three-dimensional helicopter rotor blade/vortex interaction is reported. The experimental configuration consisted of a vertical semispan vortex-generating wing, mounted upstream of a horizontal semispan rotor blade airfoil. A three-dimensional laser velocimeter was used to measure the velocity field in the region of the blade. Sectional lift coefficients were calculated by integrating the velocity field to obtain the bound vorticity. Total lift values, obtained by using an internal strain-gauge balance, verified the laser velocimeter data. Parametric variations of vortex strength, rotor blade angle of attack, and vortex position relative to the rotor blade were explored. These data are reported (with attention to experimental limitations) to provide a dataset for the validation of analytical work.

Dunagan, Stephen E.↗

A free-flying power plant for a manned space station

The 0.1 Hz fundamental structural frequency anticipated for the large solar array panels required to power manned space stations is close to the attitude control system bandwidth, and within the bandwidth of crew motion disturbances. Attention is presently given to a detachment of the solar panel system to create a free-flying powerplant for the space station, and to the control system that will maintain its attitude and position relative to the space station by means of thrusters that are supplied with space station state data by a laser/optical sensor system. Power transmission alternatives for this free-flying power system are discussed.

Paluszek, M.↗